Z77A-G45 and Sapphire HD 7850 OC 2go = problem with PCI-E 3
Hi !
I'm sorry for my English but I'm French and I hope that I will be understood.
Here is my problem :
I have bought a mobo Z77A-G45 and a graphic card Sapphire Radeon HD 7850 OC Version 2go which is compatible PCI-E 3 x16.
But when I go in the catalyst center to view the information on the hardware it says PCI-E 2 16x.
In the bios it's on AUTO.
This is not normal ??
Thanks you very much for your help
oh I'm sorry !
Board: MSI Z77A-G45
Bios: Version 2.6
VGA: Sapphire Radeon HD 7850 OC 2go
PSU: OCZ ModXStream Pro 600W
Intel Core i3-3220 Ivy Bridge 3.3GHz LGA 1155 55W
MEM: Crucial Ballistix 2x4gb DDR3 PC3-12800 CAS8
HDD: Samsung Serie 830 - 64go SSD
OS: Windows 7 64bit Ultimate
So I have an Ivy Bridge CPU... In the BIOS I just have the choice between AUTO and DISABLED. It's on AUTO.
Thank you for your help !!
Similar Messages
-
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store. What does that mean please?
Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.
-
when I download the new itunes (on my pc); going through the dowload process it stop me and a window pops up and it says: (there is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.)
I have tried several times to redownload and keep getting the same message. what am I doing wrong...Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
Easier and better ways to solve current problems with Acrobat?
Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
MarcSorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?
Hey grossa2,
First, here is a way to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Then, I'd go through this article, which helps troubleshoot a lack of audio playback in iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Take care,
Delgadoh -
I can't upload new apps or updated apps, and it shows that I have problem with last purchase. I guess my credit card is over limit and the purchase is not completed because of uncollected. I have filled up some to my credit card. Will it deduct later?
The problem is I have no computer to use the Itunes and can't go to last purchase. Also, I have ipad 2 using the same adminstrator and have the same problem.Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"
-
Dear supporter
I couldn’t install iTunes on my laptop and showed me “This is a problem with this windows installer package a program required to install to complete could not be run. Contact your support personnel or package vendor ‘.Windows of my laptop is win8 Enterprise Build 9200, 64bit.
Best regards
MajidTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Help
WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple RoutersTwo ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
Happy hunting!
john -
Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars...
Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars - I keep all the details of my work schedule on Calendars but since updating everything I am notified at 9 a.m. before each of my days off. Can someone please tell me how I can stop this? Also, how can I change that time (9a.m.) if I do want to be notified about something?
Thanks.troubleshooting message http://support.apple.com/kb/ts2755
Do you have MMS turn on in Settings?
Are you provisioned by your carrier to use MMS?
Lastly, give your phone carrier a call, as MMS is a carrier feature. -
Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do
go to this page and cotact iTunes store and they can help you out with this
https://expresslane.apple.com/Issues.action -
I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?
I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.
-
MSI Z77A-G45 and Samsung 840 Series weirdness
Ok so here's the thing
about a week ago i decided that it was time to build a new computer with a Z77A-G45 motherboard
put it together, installed windows 7 64-bit and everything was working just fine - for about 5 days -
but then one morning when i turned on my computer it decided not to boot and just sat there with fans running with an A2 code at the bottom left of the screen
i tried taking out the ram leaving just 1 in and moving it to different slots and trying a different ram block boots thinking it might be faulty ram,
when that didn't work i tried removing the graphics card and boot with just the onboard VGA, reset the CMOS jumper, and even replaced that battery on the motherboard thinking the shop might have shipped an almost dead one, took everything apart and booted it outside the case on a glass surface to make sure it wasn't some sort of short
but the only time it actually wanted to get past the A2 code was when i booted with only 1 of my hard drives, so i started changing my drives around using various combinations of SATA cables and ports (luckily had an extra 5 SATA cables lying around)
eventually i narrowed it down to it wanting to boot with 2 of my 3 drives but the 3rd one (a Samsung 840 series 500 GB SSD, that has no system files or anything fancy other then music, movies and a few games at the moment) getting it stuck on the A2 code
so i set it up as an external USB drive with a SATA/USB converter i had sitting around but then it would get stuck on B4 instead if i booted with the drive connected
however everything would work just fine if i connected the drive after the system had booted up (or even just unplugging and replugging it when it got stuck on the B4)
once back in windows with the drive connected i ran all the diagnostics i could think of but nothing showed anything wrong with it
(and the only thing i had done with the drive before it stopped wanting to boot was to defrag it)
eventually i decided to copy all the files from the drive to a different drive and reformat it as sort of a hail-mary
and to my surprise that actually made it boot up just fine
so i moved it back inside the case as a normal drive just to make sure it would still work (which it did) and then moved all the files back to see if any of them were the culprit - that turned out not to be the case however
it booted up without complaint with all the original files on it
so now my question is why?
what the heck is going on?
did defragging cause some sort of data fault that caused the bios to not be able to read the drive properly or did i just buy a haunted computer?
like i said everything is back in the state it was the day before it didn't want to boot and bios and been defaulted so it's not really an issue at the moment but I'd still like to know what's going on so i can hopefully avoid it in the future
any answers or comments will be appreciated
for your reference a full parts list:
Motherboard: MSI Z77A-G45
Bios Version: 2.10
Graphics card: Club3D GeForce GTX 550ti 2GB
PSU: Corsair TX 950W - 100-240V ~ 12A 50/60Hz
CPU: Intel Core i7 3770K / 3.5 GHz Processor (Stock boxed fan)
RAM: Corsair Vengeance - 32 GB (4 x 8 GB) - DIMM 240-pin - DDR3 - 1600 MHz ( PC3-12800 )
HDD: OCZ-Vertex2 128GB SSD (OS)
Hitachi HDS722020ALA330 2TB HDD (Media/Backup)
Samsung 840 Series 500GB SSD (Media/Backup)
OS: Windows 7 64bit UltimateThis is strange
I have Z77A-G43, and have exactly the same problem with one 1GB sata drive, that works just fine in every other PC.
In my case PC run into restart loop, but with same code A2 as yours.
Strangest part was PC was restarting even if I put HDD into PCI Sata/Raid card !?
So I am guessing here its not a hardware problem, but a software (BIOS) problem.
Now whole pc with Z77A-G43 is at Service because of faulty DVI output (not working).
Will try reformating drive, but need first to buy >1gb hdd to backup that one
Drive is currently working just fine in this 10y old MSI PC =.=
It seams they have stopped making things as they used to, this old mb is one durrable dog.
which was the main reason I went to same company when in question was mb...
Maybe you are looking for
-
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem
-
Flash audio player script played MP3 sped-up for only one user
Hello all, My first post here; I hope this is the right forum for a general/newbie Flash question. I'm using a Flash audio player script that I got here: http://www.1pixelout.net/code/audio-player-wordpress-plugin/ Here it is on the web page, a few l
-
The title says it all, really. I ordered on the launch day as soon as the online store came back up. It's been prepared to ship since early on Monday morning (UK time), and in the last hour the order status changed to shipped. However, looking at the
-
Regarding Configuration Settings for invoice tranfering
Hi, I am new to MM.I want to be transfer Invoices from MM to SRM.Apart from this where i need to configuration settings has to be done(for different vendors). Can any one give me the solution for this? Thanks in Advance, regards, kishore. Edit
-
Dear Scenario is such as follows: If current invoice number is at say 9055555. Created a new number range just for the S2 cancellations starting at say 9088888. Now all newly created S1's will use this 9088888 range. I will have to manually manage S