Z77A-GD55 not booting(boot loop)

hey ...
I got hold of a z77a-GD55 mobo where the previous owner did not know if this motherboard was working or not.
I have installed an i5 2300 CPU and 4gb ram on two sticks.
when I press the start button its turns on and runs for about 5 seconds and simply turns off and on again in a loop.No picture on screen.
All the phase leds turns on.
I have tried all ram slots with one stick of RAM, reset the bios, taken out the cpu and reseated it with new thermalpaste and with / without gpu.
I have only run this motherboard on a cardboard box.
Can anyone help me here?

This sounds like the BIOS was corrupted due to a bad flash. The boot block is probably bad too. I've had this happen when trying to use the M-Flash function.
Download all of the different versions of the BIOS for your motherboard from the MSI main site. Place all of the BIOS ROM files in a FAT32 formatted USB stick in the root directory. Insert USB stick, hold down home key, and power on while holding down the home key. Watch USB activity on the flash drive. If the light on the USB flash drive blinks a lot, then it is loading your BIOS.
If that doesn't fix it, go to a computer shop and have them program your BIOS using an in-circuit SPI programmer. You can buy a cheap one from China/Hong Kong if you feel like doing it yourself.
Good luck.

Similar Messages

Impossible boot with Z77A-GD55

Hello.
First of all,my english is very BAD,so i'm sorry for errors.
I have a PC with a Z77A-GD55 Motherboard.It worked great for 2 months,but now i can't boot my PC.
When i try to boot it,the case fans and the CPU fan spin,but after 10 seconds the boot process stop and 2-3 seconds later it restarts.I can't access windows and the Bios too.
Where is the problem?I was thinking to update my BIOS but i don't know how to do it without entering windows or the bios.
Please help me!
Thank you,and sorry for bad english!

Quote
Oh,ok.i Will try it tomorrow,here in Italy is night now
Where I am it's night too, same time to be exact .
Quote
Other ideas?
Take machine apart and try barebone as you already did (only PSU and Motherboard with Ram,CPU and CPU Cooler) outside of case on a non conductive surface (e.g. wood).

Sony D-50 "boot-up loop" problem

I have a Sony D-50 portable recorder barely three months old that did something totally strange. Has anyone else had this problem?
During a shoot yesterday, I noticed that the Sony D50 I bought back in August would not turn OFF.
When I moved the power switch to the OFF position, the machine went into a "boot up loop," that is:
I'd turn it OFF after recording.
Screen goes black.
I get the "See you!" message.
Screen lights up again.
The word "SONY" appears as though it's gonna boot up,
Then the whole process starts over again
Screen goes black.
I get the "See you!" message.
Screen lights up.
The word "SONY" appears as though it's gonna boot up....
So, same thing late last night.
I get up this morning and turn it ON; it works fine until I turn it off, then it goes back into the "boot loop" thing again.
I tried everything I could think of, even searching for a "RESET" on the machine and in the Menu. I finally had to take the batteries out of it to shut it down.
Then, I did something that apparently---so far---fixed it.
This is so strange---right out of the Twilight Zone:
I put the batteries back in it, then it starts the loop again.
Since it won't turn OFF, I take the batteries out of it in the OFF position. I wait five minutes and put the batteries back in it with it in the OFF position.
Same problem---the "boot up loop" thing.
I take the batteries back out of it again in the OFF position and wait fifteen minutes. I put the batteries back in it while it's still in the OFF position. Guess what?
Problem solved: It's doesn't start the "boot up loop" thing.
So, I turn it back ON. Machine boots up fine and is ready to record.
OK, I turn it OFF.
Back to the exact same problem---It shuts down and goes into the "boot up loop" again.
I go back through the same process of removing and installing the batteries with the machine in the OFF position.
Nothing changes.
Then, I have an idea.
With the machine in the OFF position and going through the "boot up loop" thing, I remove the batteries.
I then move the power switch to the ON position before I put the batteries back in it---had not tried that before: reinstalling the batteries with it in the ON position. I install the batteries with the machine in the ON position.
Machine boots up fine and is ready for recording.
Now, I turn it OFF.
The machine shuts down fine with no "boot up loop" problem.
Putting the batteries back in the machine with it in the ON position instead of the OFF position apparently solved the problem.
So, I turn it back ON and then OFF several times.
Same thing: No "boot up loop" problem.
Do-do-Do-do....
The machine now works fine.
Anyone ever had this happen to a Sony D-50?
I'm wondering if I should send it to back to Sony before it does this again. For God's sake, it's only three months old!
I bought it after rave reviews in the "recorder" community, and I haven't found anyone else who has had this problem with one..

Sorry to see that you were having this issue with your PCM-D50 Linear PCM Recorder - if you continue having the issue the unit may need service - give Sony Business and Professional team a call and they will be happy to assist:
http://pro.sony.com/bbsc/ssr/services.s ... port.shtml

[SOLVED] efibootmgr not generating boot loader (rEFInd, etc.) entry.

Hello,
The following command runs without problem or any output. It wouldn't create any entry. Also my refind.conf is not being followed. rEFInd is able to detect kernels and boot fine from /boot
efibootmgr -c -g -d /dev/sda -p 1 -w -L "rEFInd" -l '\EFI\refind\refind_x64.efi'
Information
efibootmgr 0.6.0-1
refind-efi 0.6.8-1
Linux 3.8.4-1-ARCH
sudo efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0006,0007,0008,0009,000A,000B,000C,000D,000E,000F,0010,0011,0012,0013
Boot0000 Setup
Boot0001 Boot Menu
Boot0002 Diagnostic Splash Screen
Boot0003 Startup Interrupt Menu
Boot0004 ME Configuration Menu
Boot0005 Rescue and Recovery
Boot0006* USB CD
Boot0007* USB FDD
Boot0008* ATAPI CD0
Boot0009* ATA HDD2
Boot000A* ATA HDD0
Boot000B* ATA HDD1
Boot000C* USB HDD
Boot000D* PCI LAN
Boot000E* ATAPI CD1
Boot000F* ATAPI CD2
Boot0010 Other CD
Boot0011* ATA HDD3
Boot0012* ATA HDD4
Boot0013 Other HDD
Boot0014* IDER BOOT CDROM
Boot0015* IDER BOOT Floppy
Boot0016* ATA HDD
Boot0017* ATAPI CD:
Boot0018* PCI LAN
ls -R /boot
/boot:
EFI initramfs-linux-fallback.img initramfs-linux.img refind_linux.conf vmlinuz-linux
/boot/EFI:
boot refind tools
/boot/EFI/boot:
bootx64.efi icons refind.conf
/boot/EFI/boot/icons:
*** Icons
/boot/EFI/refind:
icons refind.conf refind_x64.efi
/boot/EFI/refind/icons:
*** icons
/boot/EFI/tools:
drivers shells
/boot/EFI/tools/drivers:
ext2_x64.efi ext4_x64.efi hfs_x64.efi iso9660_x64.efi reiserfs_x64.efi
/boot/EFI/tools/shells:
Shell.efi Shell_Full.efi
cat /boot/refind_linux.conf
"Boot to X" "root=PARTUUID=5416f920-35fc-42a8-8a34-564c8c332bfe ro rootfstype=ext4 add_efi_memmap systemd.unit=graphical.target"
"Boot to Console" "root=PARTUUID=5416f920-35fc-42a8-8a34-564c8c332bfe ro rootfstype=ext4 add_efi_memmap systemd.unit=multi-user.target"
# refind.conf
# Configuration file for the rEFInd boot menu
# Timeout in seconds for the main menu screen. Setting the timeout to 0
# disables automatic booting (i.e., no timeout).
timeout 5
# Hide user interface elements for personal preference or to increase
# security:
# banner - the rEFInd title banner (built-in or loaded via "banner")
# label - boot option text label in the menu
# singleuser - remove the submenu options to boot Mac OS X in single-user
# or verbose modes; affects ONLY MacOS X
# safemode - remove the submenu option to boot Mac OS X in "safe mode"
# hwtest - the submenu option to run Apple's hardware test
# arrows - scroll arrows on the OS selection tag line
# hints - brief command summary in the menu
# editor - the options editor (+, F2, or Insert on boot options menu)
# all - all of the above
# Default is none of these (all elements active)
#hideui singleuser
#hideui all
# Set the name of a subdirectory in which icons are stored. Icons must
# have the same names they have in the standard directory. The directory
# name is specified relative to the main rEFInd binary's directory. If
# an icon can't be found in the specified directory, an attempt is made
# to load it from the default directory; thus, you can replace just some
# icons in your own directory and rely on the default for others.
# Default is "icons".
#icons_dir myicons
# Use a custom title banner instead of the rEFInd icon and name. The file
# path is relative to the directory where refind.efi is located. The color
# in the top left corner of the image is used as the background color
# for the menu screens. Currently uncompressed BMP images with color
# depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
#banner hostname.bmp
#banner mybanner.png
# Custom images for the selection background. There is a big one (144 x 144)
# for the OS icons, and a small one (64 x 64) for the function icons in the
# second row. If only a small image is given, that one is also used for
# the big icons by stretching it in the middle. If only a big one is given,
# the built-in default will be used for the small icons.
# Like the banner option above, these options take a filename of an
# uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
# or a PNG image. The PNG format is required if you need transparency
# support (to let you "see through" to a full-screen banner).
#selection_big selection-big.bmp
#selection_small selection-small.bmp
# Set the font to be used for all textual displays in graphics mode.
# The font must be a PNG file with alpha channel transparency. It must
# contain ASCII characters 32-126 (space through tilde), inclusive, plus
# a glyph to be displayed in place of characters outside of this range,
# for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
# may be of any size, although large fonts can produce display
# irregularities.
# The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
#font myfont.png
# Use text mode only. When enabled, this option forces rEFInd into text mode.
# Passing this option a "0" value causes graphics mode to be used. Pasing
# it no value or any non-0 value causes text mode to be used.
# Default is to use graphics mode.
#textonly
textonly
# Set the EFI text mode to be used for textual displays. This option
# takes a single digit that refers to a mode number. Mode 0 is normally
# 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
# modes. Mode 1024 is a special code that tells rEFInd to not set the
# text mode; it uses whatever was in use when the program was launched.
# If you specify an invalid mode, rEFInd pauses during boot to inform
# you of valid modes.
# CAUTION: On VirtualBox, and perhaps on some real computers, specifying
# a text mode and uncommenting the "textonly" option while NOT specifying
# a resolution can result in an unusable display in the booted OS.
# Default is 1024 (no change)
#textmode 2
textmode 1024
# Set the screen's video resolution. Pass this option either:
# * two values, corresponding to the X and Y resolutions
# * one value, corresponding to a GOP (UEFI) video mode
# Note that not all resolutions are supported. On UEFI systems, passing
# an incorrect value results in a message being shown on the screen to
# that effect, along with a list of supported modes. On EFI 1.x systems
# (e.g., Macintoshes), setting an incorrect mode silently fails. On both
# types of systems, setting an incorrect resolution results in the default
# resolution being used. A resolution of 1024x768 usually works, but higher
# values often don't.
# Default is "0 0" (use the system default resolution, usually 800x600).
#resolution 1024 768
#resolution 3
resolution 1024 768
# Launch specified OSes in graphics mode. By default, rEFInd switches
# to text mode and displays basic pre-launch information when launching
# all OSes except OS X. Using graphics mode can produce a more seamless
# transition, but displays no information, which can make matters
# difficult if you must debug a problem. Also, on at least one known
# computer, using graphics mode prevents a crash when using the Linux
# kernel's EFI stub loader. You can specify an empty list to boot all
# OSes in text mode.
# Valid options:
# osx - Mac OS X
# linux - A Linux kernel with EFI stub loader
# elilo - The ELILO boot loader
# grub - The GRUB (Legacy or 2) boot loader
# windows - Microsoft Windows
# Default value: osx
#use_graphics_for osx,linux
# Which non-bootloader tools to show on the tools line, and in what
# order to display them:
# shell - the EFI shell (requires external program; see rEFInd
# documentation for details)
# gptsync - the (dangerous) gptsync.efi utility (requires external
# program; see rEFInd documentation for details)
# apple_recovery - boots the Apple Recovery HD partition, if present
# mok_tool - makes available the Machine Owner Key (MOK) maintenance
# tool, MokManager.efi, used on Secure Boot systems
# about - an "about this program" option
# exit - a tag to exit from rEFInd
# shutdown - shuts down the computer (a bug causes this to reboot
# EFI systems)
# reboot - a tag to reboot the computer
# Default is shell,apple_recovery,mok_tool,about,shutdown,reboot
#showtools shell, mok_tool, about, reboot, exit
showtools shell, mok_tool, about, reboot, exit
# Directories in which to search for EFI drivers. These drivers can
# provide filesystem support, give access to hard disks on plug-in
# controllers, etc. In most cases none are needed, but if you add
# EFI drivers and you want rEFInd to automatically load them, you
# should specify one or more paths here. rEFInd always scans the
# "drivers" and "drivers_{arch}" subdirectories of its own installation
# directory (where "{arch}" is your architecture code); this option
# specifies ADDITIONAL directories to scan.
# Default is to scan no additional directories for EFI drivers
#scan_driver_dirs EFI/tools/drivers,drivers
scan_driver_dirs /boot/EFI/tools/drivers,drivers
# Which types of boot loaders to search, and in what order to display them:
# internal - internal EFI disk-based boot loaders
# external - external EFI disk-based boot loaders
# optical - EFI optical discs (CD, DVD, etc.)
# hdbios - BIOS disk-based boot loaders
# biosexternal - BIOS external boot loaders (USB, eSATA, etc.)
# cd - BIOS optical-disc boot loaders
# manual - use stanzas later in this configuration file
# Note that the legacy BIOS options require firmware support, which is
# not present on all computers.
# On UEFI PCs, default is internal,external,optical,manual
# On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
#scanfor internal,external,optical,manual
scanfor internal,external,optical,manual
# Delay for the specified number of seconds before scanning disks.
# This can help some users who find that some of their disks
# (usually external or optical discs) aren't detected initially,
# but are detected after pressing Esc.
# The default is 0.
#scan_delay 5
# When scanning volumes for EFI boot loaders, rEFInd always looks for
# Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
# and scans the root directory and every subdirectory of the /EFI directory
# for additional boot loaders, but it doesn't recurse into these directories.
# The also_scan_dirs token adds more directories to the scan list.
# Directories are specified relative to the volume's root directory. This
# option applies to ALL the volumes that rEFInd scans UNLESS you include
# a volume name and colon before the directory name, as in "myvol:/somedir"
# to scan the somedir directory only on the filesystem named myvol. If a
# specified directory doesn't exist, it's ignored (no error condition
# results). The default is to scan the "boot" directory in addition to
# various hard-coded directories.
#also_scan_dirs boot,ESP2:EFI/linux/kernels
# Partitions to omit from scans. You must specify a volume by its
# label, which you can obtain in an EFI shell by typing "vol", from
# Linux by typing "blkid /dev/{devicename}", or by examining the
# disk's label in various OSes' file browsers.
# The default is "Recovery HD".
#dont_scan_volumes "Recovery HD"
# Directories that should NOT be scanned for boot loaders. By default,
# rEFInd doesn't scan its own directory or the EFI/tools directory.
# You can "blacklist" additional directories with this option, which
# takes a list of directory names as options. You might do this to
# keep EFI/boot/bootx64.efi out of the menu if that's a duplicate of
# another boot loader or to exclude a directory that holds drivers
# or non-bootloader utilities provided by a hardware manufacturer. If
# a directory is listed both here and in also_scan_dirs, dont_scan_dirs
# takes precedence. Note that this blacklist applies to ALL the
# filesystems that rEFInd scans, not just the ESP, unless you precede
# the directory name by a filesystem name, as in "myvol:EFI/somedir"
# to exclude EFI/somedir from the scan on the myvol volume but not on
# other volumes.
#dont_scan_dirs ESP:/EFI/boot,EFI/Dell
# Files that should NOT be included as EFI boot loaders (on the
# first line of the display). If you're using a boot loader that
# relies on support programs or drivers that are installed alongside
# the main binary or if you want to "blacklist" certain loaders by
# name rather than location, use this option. Note that this will
# NOT prevent certain binaries from showing up in the second-row
# set of tools. Most notably, MokManager.efi is in this blacklist,
# but will show up as a tool if present in certain directories. You
# can control the tools row with the showtools token.
# The default is shim.efi,TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,HashTool-signed.efi
#dont_scan_files shim.efi,MokManager.efi
# Scan for Linux kernels that lack a ".efi" filename extension. This is
# useful for better integration with Linux distributions that provide
# kernels with EFI stub loaders but that don't give those kernels filenames
# that end in ".efi", particularly if the kernels are stored on a
# filesystem that the EFI can read. When uncommented, this option causes
# all files in scanned directories with names that begin with "vmlinuz"
# or "bzImage" to be included as loaders, even if they lack ".efi"
# extensions. The drawback to this option is that it can pick up kernels
# that lack EFI stub loader support and other files. Passing this option
# a "0" value causes kernels without ".efi" extensions to NOT be scanned;
# passing it alone or with any other value causes all kernels to be scanned.
# Default is to NOT scan for kernels without ".efi" extensions.
scan_all_linux_kernels
# Set the maximum number of tags that can be displayed on the screen at
# any time. If more loaders are discovered than this value, rEFInd shows
# a subset in a scrolling list. If this value is set too high for the
# screen to handle, it's reduced to the value that the screen can manage.
# If this value is set to 0 (the default), it's adjusted to the number
# that the screen can handle.
#max_tags 0
# Set the default menu selection. The available arguments match the
# keyboard accelerators available within rEFInd. You may select the
# default loader using:
# - A digit between 1 and 9, in which case the Nth loader in the menu
# will be the default.
# - Any substring that corresponds to a portion of the loader's title
# (usually the OS's name or boot loader's path).
#default_selection 1
default_selection "vmlinuz-linux"
# Include a secondary configuration file within this one. This secondary
# file is loaded as if its options appeared at the point of the "include"
# token itself, so if you want to override a setting in the main file,
# the secondary file must be referenced AFTER the setting you want to
# override. Note that the secondary file may NOT load a tertiary file.
#include manual.conf
# Sample manual configuration stanzas. Each begins with the "menuentry"
# keyword followed by a name that's to appear in the menu (use quotes
# if you want the name to contain a space) and an open curly brace
# ("{"). Each entry ends with a close curly brace ("}"). Common
# keywords within each stanza include:
# volume - identifies the filesystem from which subsequent files
# are loaded. You can specify the volume by label or by
# a number followed by a colon (as in "0:" for the first
# filesystem or "1:" for the second).
# loader - identifies the boot loader file
# initrd - Specifies an initial RAM disk file
# icon - specifies a custom boot loader icon
# ostype - OS type code to determine boot options available by
# pressing Insert. Valid values are "MacOS", "Linux",
# "Windows", and "XOM". Case-sensitive.
# graphics - set to "on" to enable graphics-mode boot (useful
# mainly for MacOS) or "off" for text-mode boot.
# Default is auto-detected from loader filename.
# options - sets options to be passed to the boot loader; use
# quotes if more than one option should be passed or
# if any options use characters that might be changed
# by rEFInd parsing procedures (=, /, #, or tab).
# disabled - use alone or set to "yes" to disable this entry.
# Note that you can use either DOS/Windows/EFI-style backslashes (\)
# or Unix-style forward slashes (/) as directory separators. Either
# way, all file references are on the ESP from which rEFInd was
# launched.
# Use of quotes around parameters causes them to be interpreted as
# one keyword, and for parsing of special characters (spaces, =, /,
# and #) to be disabled. This is useful mainly with the "options"
# keyword. Use of quotes around parameters that specify filenames is
# permissible, but you must then use backslashes instead of slashes,
# except when you must pass a forward slash to the loader, as when
# passing a root= option to a Linux kernel.
# Below are several sample boot stanzas. All are disabled by default.
# Find one similar to what you need, copy it, remove the "disabled" line,
# and adjust the entries to suit your needs.
# A sample entry for a Linux 3.3 kernel with its new EFI boot stub
# support on a filesystem called "KERNELS". This entry includes
# Linux-specific boot options and specification of an initial RAM disk.
# Note uses of Linux-style forward slashes, even in the initrd
# specification. Also note that a leading slash is optional in file
# specifications.
menuentry Linux {
icon EFI/refind/icons/os_linux.icns
volume KERNELS
loader bzImage-3.3.0-rc7
initrd initrd-3.3.0.img
options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
disabled
# A sample entry for loading Ubuntu using its standard name for
# its GRUB 2 boot loader. Note uses of Linux-style forward slashes
menuentry Ubuntu {
loader /EFI/ubuntu/grubx64.efi
icon /EFI/refined/icons/os_linux.icns
disabled
# A minimal ELILO entry, which probably offers nothing that
# auto-detection can't accomplish.
menuentry "ELILO" {
loader \EFI\elilo\elilo.efi
disabled
# Like the ELILO entry, this one offers nothing that auto-detection
# can't do; but you might use it if you want to disable auto-detection
# but still boot Windows....
menuentry "Windows 7" {
loader \EFI\Microsoft\Boot\bootmgfw.efi
disabled
# EFI shells are programs just like boot loaders, and can be
# launched in the same way. You can pass a shell the name of a
# script that it's to run on the "options" line. The script
# could initialize hardware and then launch an OS, or it could
# do something entirely different.
menuentry "Windows via shell script" {
icon \EFI\refind\icons\os_win.icns
loader \EFI\tools\shell.efi
options "fs0:\EFI\tools\launch_windows.nsh"
disabled
# Mac OS is normally detected and run automatically; however,
# if you want to do something unusual, a manual boot stanza may
# be the way to do it. This one does nothing very unusual, but
# it may serve as a starting point. Note that you'll almost
# certainly need to change the "volume" line for this example
# to work.
menuentry "My Mac OS X" {
icon \EFI\refind\icons\os_mac.icns
volume "OS X boot"
loader \System\Library\CoreServices\boot.efi
disabled
cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2
UUID=7b92a840-4747-43b7-b2cf-02cbf92afce7 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda4
UUID=72f64fd4-a3f1-424c-8fe3-cdf7751a84e0 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda1
# UUID=5447-7409 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
UUID=5447-7409 /boot vfat noatime 0 2
# /dev/sda3
UUID=1e11bea5-41db-4969-a8fa-a461734b71ac none swap defaults 0 0
This is a clean install using April 01 ISO with minimal or no modifications. I have tried to follow wiki as precisely as possible. I am not sure what I am missing. Thanks.
EDIT1: Updated and cleaned the post to better reflect current structure and added /etc/fstab.
EDIT2: @swordfish Removed /boot/EFI/arch.
Last edited by donniezazen (2013-04-04 06:37:07)

I used March ISO instead of April ISO and it worked flawlessly. There is some problem with April ISO where efibootmgr and UEFI Shell1/2 fail with ASSERT_EFI_ERROR (status = device error).
I have removed both /boot/EFI/boot and /boot/EFI/arch. I now have two entries one on vmlinuz-linux on 1024 Fat 32 partition which works and second one boot/vmlinuz-linux on 20G / partition which fails and takes me to rootfs. Also refind isn't showing UEFI shells that I have in /boot/EFI/tools/Shells.
ls -R /boot
/boot:
EFI initramfs-linux-fallback.img initramfs-linux.img refind_linux.conf vmlinuz-linux
/boot/EFI:
drivers refind tools
/boot/EFI/drivers:
ext2_x64.efi ext4_x64.efi hfs_x64.efi iso9660_x64.efi reiserfs_x64.efi
/boot/EFI/refind:
icons refind.conf refind_x64.efi
/boot/EFI/refind/icons:
### Icons
/boot/EFI/tools:
Shell.efi
# refind.conf
# Configuration file for the rEFInd boot menu
# Timeout in seconds for the main menu screen. Setting the timeout to 0
# disables automatic booting (i.e., no timeout).
timeout 5
# Hide user interface elements for personal preference or to increase
# security:
# banner - the rEFInd title banner (built-in or loaded via "banner")
# label - boot option text label in the menu
# singleuser - remove the submenu options to boot Mac OS X in single-user
# or verbose modes; affects ONLY MacOS X
# safemode - remove the submenu option to boot Mac OS X in "safe mode"
# hwtest - the submenu option to run Apple's hardware test
# arrows - scroll arrows on the OS selection tag line
# hints - brief command summary in the menu
# editor - the options editor (+, F2, or Insert on boot options menu)
# all - all of the above
# Default is none of these (all elements active)
#hideui singleuser
#hideui all
# Set the name of a subdirectory in which icons are stored. Icons must
# have the same names they have in the standard directory. The directory
# name is specified relative to the main rEFInd binary's directory. If
# an icon can't be found in the specified directory, an attempt is made
# to load it from the default directory; thus, you can replace just some
# icons in your own directory and rely on the default for others.
# Default is "icons".
#icons_dir myicons
# Use a custom title banner instead of the rEFInd icon and name. The file
# path is relative to the directory where refind.efi is located. The color
# in the top left corner of the image is used as the background color
# for the menu screens. Currently uncompressed BMP images with color
# depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
#banner hostname.bmp
#banner mybanner.png
# Custom images for the selection background. There is a big one (144 x 144)
# for the OS icons, and a small one (64 x 64) for the function icons in the
# second row. If only a small image is given, that one is also used for
# the big icons by stretching it in the middle. If only a big one is given,
# the built-in default will be used for the small icons.
# Like the banner option above, these options take a filename of an
# uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
# or a PNG image. The PNG format is required if you need transparency
# support (to let you "see through" to a full-screen banner).
#selection_big selection-big.bmp
#selection_small selection-small.bmp
# Set the font to be used for all textual displays in graphics mode.
# The font must be a PNG file with alpha channel transparency. It must
# contain ASCII characters 32-126 (space through tilde), inclusive, plus
# a glyph to be displayed in place of characters outside of this range,
# for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
# may be of any size, although large fonts can produce display
# irregularities.
# The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
#font myfont.png
# Use text mode only. When enabled, this option forces rEFInd into text mode.
# Passing this option a "0" value causes graphics mode to be used. Pasing
# it no value or any non-0 value causes text mode to be used.
# Default is to use graphics mode.
#textonly
textonly
# Set the EFI text mode to be used for textual displays. This option
# takes a single digit that refers to a mode number. Mode 0 is normally
# 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
# modes. Mode 1024 is a special code that tells rEFInd to not set the
# text mode; it uses whatever was in use when the program was launched.
# If you specify an invalid mode, rEFInd pauses during boot to inform
# you of valid modes.
# CAUTION: On VirtualBox, and perhaps on some real computers, specifying
# a text mode and uncommenting the "textonly" option while NOT specifying
# a resolution can result in an unusable display in the booted OS.
# Default is 1024 (no change)
#textmode 2
textmode 1024
# Set the screen's video resolution. Pass this option either:
# * two values, corresponding to the X and Y resolutions
# * one value, corresponding to a GOP (UEFI) video mode
# Note that not all resolutions are supported. On UEFI systems, passing
# an incorrect value results in a message being shown on the screen to
# that effect, along with a list of supported modes. On EFI 1.x systems
# (e.g., Macintoshes), setting an incorrect mode silently fails. On both
# types of systems, setting an incorrect resolution results in the default
# resolution being used. A resolution of 1024x768 usually works, but higher
# values often don't.
# Default is "0 0" (use the system default resolution, usually 800x600).
#resolution 1024 768
#resolution 3
resolution 1024 768
# Launch specified OSes in graphics mode. By default, rEFInd switches
# to text mode and displays basic pre-launch information when launching
# all OSes except OS X. Using graphics mode can produce a more seamless
# transition, but displays no information, which can make matters
# difficult if you must debug a problem. Also, on at least one known
# computer, using graphics mode prevents a crash when using the Linux
# kernel's EFI stub loader. You can specify an empty list to boot all
# OSes in text mode.
# Valid options:
# osx - Mac OS X
# linux - A Linux kernel with EFI stub loader
# elilo - The ELILO boot loader
# grub - The GRUB (Legacy or 2) boot loader
# windows - Microsoft Windows
# Default value: osx
#use_graphics_for osx,linux
# Which non-bootloader tools to show on the tools line, and in what
# order to display them:
# shell - the EFI shell (requires external program; see rEFInd
# documentation for details)
# gptsync - the (dangerous) gptsync.efi utility (requires external
# program; see rEFInd documentation for details)
# apple_recovery - boots the Apple Recovery HD partition, if present
# mok_tool - makes available the Machine Owner Key (MOK) maintenance
# tool, MokManager.efi, used on Secure Boot systems
# about - an "about this program" option
# exit - a tag to exit from rEFInd
# shutdown - shuts down the computer (a bug causes this to reboot
# EFI systems)
# reboot - a tag to reboot the computer
# Default is shell,apple_recovery,mok_tool,about,shutdown,reboot
#showtools shell, mok_tool, about, reboot, exit
showtools shell, about, reboot, exit
# Directories in which to search for EFI drivers. These drivers can
# provide filesystem support, give access to hard disks on plug-in
# controllers, etc. In most cases none are needed, but if you add
# EFI drivers and you want rEFInd to automatically load them, you
# should specify one or more paths here. rEFInd always scans the
# "drivers" and "drivers_{arch}" subdirectories of its own installation
# directory (where "{arch}" is your architecture code); this option
# specifies ADDITIONAL directories to scan.
# Default is to scan no additional directories for EFI drivers
#scan_driver_dirs EFI/tools/drivers,drivers
scan_driver_dirs EFI/tools/drivers,drivers
# Which types of boot loaders to search, and in what order to display them:
# internal - internal EFI disk-based boot loaders
# external - external EFI disk-based boot loaders
# optical - EFI optical discs (CD, DVD, etc.)
# hdbios - BIOS disk-based boot loaders
# biosexternal - BIOS external boot loaders (USB, eSATA, etc.)
# cd - BIOS optical-disc boot loaders
# manual - use stanzas later in this configuration file
# Note that the legacy BIOS options require firmware support, which is
# not present on all computers.
# On UEFI PCs, default is internal,external,optical,manual
# On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
#scanfor internal,external,optical,manual
scanfor internal,external,optical,manual
# Delay for the specified number of seconds before scanning disks.
# This can help some users who find that some of their disks
# (usually external or optical discs) aren't detected initially,
# but are detected after pressing Esc.
# The default is 0.
#scan_delay 5
# When scanning volumes for EFI boot loaders, rEFInd always looks for
# Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
# and scans the root directory and every subdirectory of the /EFI directory
# for additional boot loaders, but it doesn't recurse into these directories.
# The also_scan_dirs token adds more directories to the scan list.
# Directories are specified relative to the volume's root directory. This
# option applies to ALL the volumes that rEFInd scans UNLESS you include
# a volume name and colon before the directory name, as in "myvol:/somedir"
# to scan the somedir directory only on the filesystem named myvol. If a
# specified directory doesn't exist, it's ignored (no error condition
# results). The default is to scan the "boot" directory in addition to
# various hard-coded directories.
#also_scan_dirs boot,ESP2:EFI/linux/kernels
# Partitions to omit from scans. You must specify a volume by its
# label, which you can obtain in an EFI shell by typing "vol", from
# Linux by typing "blkid /dev/{devicename}", or by examining the
# disk's label in various OSes' file browsers.
# The default is "Recovery HD".
#dont_scan_volumes "Recovery HD"
# Directories that should NOT be scanned for boot loaders. By default,
# rEFInd doesn't scan its own directory or the EFI/tools directory.
# You can "blacklist" additional directories with this option, which
# takes a list of directory names as options. You might do this to
# keep EFI/boot/bootx64.efi out of the menu if that's a duplicate of
# another boot loader or to exclude a directory that holds drivers
# or non-bootloader utilities provided by a hardware manufacturer. If
# a directory is listed both here and in also_scan_dirs, dont_scan_dirs
# takes precedence. Note that this blacklist applies to ALL the
# filesystems that rEFInd scans, not just the ESP, unless you precede
# the directory name by a filesystem name, as in "myvol:EFI/somedir"
# to exclude EFI/somedir from the scan on the myvol volume but not on
# other volumes.
#dont_scan_dirs ESP:/EFI/boot,EFI/Dell
# Files that should NOT be included as EFI boot loaders (on the
# first line of the display). If you're using a boot loader that
# relies on support programs or drivers that are installed alongside
# the main binary or if you want to "blacklist" certain loaders by
# name rather than location, use this option. Note that this will
# NOT prevent certain binaries from showing up in the second-row
# set of tools. Most notably, MokManager.efi is in this blacklist,
# but will show up as a tool if present in certain directories. You
# can control the tools row with the showtools token.
# The default is shim.efi,TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,HashTool-signed.efi
#dont_scan_files shim.efi,MokManager.efi
# Scan for Linux kernels that lack a ".efi" filename extension. This is
# useful for better integration with Linux distributions that provide
# kernels with EFI stub loaders but that don't give those kernels filenames
# that end in ".efi", particularly if the kernels are stored on a
# filesystem that the EFI can read. When uncommented, this option causes
# all files in scanned directories with names that begin with "vmlinuz"
# or "bzImage" to be included as loaders, even if they lack ".efi"
# extensions. The drawback to this option is that it can pick up kernels
# that lack EFI stub loader support and other files. Passing this option
# a "0" value causes kernels without ".efi" extensions to NOT be scanned;
# passing it alone or with any other value causes all kernels to be scanned.
# Default is to NOT scan for kernels without ".efi" extensions.
scan_all_linux_kernels
# Set the maximum number of tags that can be displayed on the screen at
# any time. If more loaders are discovered than this value, rEFInd shows
# a subset in a scrolling list. If this value is set too high for the
# screen to handle, it's reduced to the value that the screen can manage.
# If this value is set to 0 (the default), it's adjusted to the number
# that the screen can handle.
#max_tags 0
# Set the default menu selection. The available arguments match the
# keyboard accelerators available within rEFInd. You may select the
# default loader using:
# - A digit between 1 and 9, in which case the Nth loader in the menu
# will be the default.
# - Any substring that corresponds to a portion of the loader's title
# (usually the OS's name or boot loader's path).
#default_selection 1
# Include a secondary configuration file within this one. This secondary
# file is loaded as if its options appeared at the point of the "include"
# token itself, so if you want to override a setting in the main file,
# the secondary file must be referenced AFTER the setting you want to
# override. Note that the secondary file may NOT load a tertiary file.
#include manual.conf
# Sample manual configuration stanzas. Each begins with the "menuentry"
# keyword followed by a name that's to appear in the menu (use quotes
# if you want the name to contain a space) and an open curly brace
# ("{"). Each entry ends with a close curly brace ("}"). Common
# keywords within each stanza include:
# volume - identifies the filesystem from which subsequent files
# are loaded. You can specify the volume by label or by
# a number followed by a colon (as in "0:" for the first
# filesystem or "1:" for the second).
# loader - identifies the boot loader file
# initrd - Specifies an initial RAM disk file
# icon - specifies a custom boot loader icon
# ostype - OS type code to determine boot options available by
# pressing Insert. Valid values are "MacOS", "Linux",
# "Windows", and "XOM". Case-sensitive.
# graphics - set to "on" to enable graphics-mode boot (useful
# mainly for MacOS) or "off" for text-mode boot.
# Default is auto-detected from loader filename.
# options - sets options to be passed to the boot loader; use
# quotes if more than one option should be passed or
# if any options use characters that might be changed
# by rEFInd parsing procedures (=, /, #, or tab).
# disabled - use alone or set to "yes" to disable this entry.
# Note that you can use either DOS/Windows/EFI-style backslashes (\)
# or Unix-style forward slashes (/) as directory separators. Either
# way, all file references are on the ESP from which rEFInd was
# launched.
# Use of quotes around parameters causes them to be interpreted as
# one keyword, and for parsing of special characters (spaces, =, /,
# and #) to be disabled. This is useful mainly with the "options"
# keyword. Use of quotes around parameters that specify filenames is
# permissible, but you must then use backslashes instead of slashes,
# except when you must pass a forward slash to the loader, as when
# passing a root= option to a Linux kernel.
# Below are several sample boot stanzas. All are disabled by default.
# Find one similar to what you need, copy it, remove the "disabled" line,
# and adjust the entries to suit your needs.
# A sample entry for a Linux 3.3 kernel with its new EFI boot stub
# support on a filesystem called "KERNELS". This entry includes
# Linux-specific boot options and specification of an initial RAM disk.
# Note uses of Linux-style forward slashes, even in the initrd
# specification. Also note that a leading slash is optional in file
# specifications.
menuentry Linux {
icon EFI/refind/icons/os_linux.icns
volume KERNELS
loader bzImage-3.3.0-rc7
initrd initrd-3.3.0.img
options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
disabled
# A sample entry for loading Ubuntu using its standard name for
# its GRUB 2 boot loader. Note uses of Linux-style forward slashes
menuentry Ubuntu {
loader /EFI/ubuntu/grubx64.efi
icon /EFI/refined/icons/os_linux.icns
disabled
# A minimal ELILO entry, which probably offers nothing that
# auto-detection can't accomplish.
menuentry "ELILO" {
loader \EFI\elilo\elilo.efi
disabled
# Like the ELILO entry, this one offers nothing that auto-detection
# can't do; but you might use it if you want to disable auto-detection
# but still boot Windows....
menuentry "Windows 7" {
loader \EFI\Microsoft\Boot\bootmgfw.efi
disabled
# EFI shells are programs just like boot loaders, and can be
# launched in the same way. You can pass a shell the name of a
# script that it's to run on the "options" line. The script
# could initialize hardware and then launch an OS, or it could
# do something entirely different.
menuentry "Windows via shell script" {
icon \EFI\refind\icons\os_win.icns
loader \EFI\tools\shell.efi
options "fs0:\EFI\tools\launch_windows.nsh"
disabled
# Mac OS is normally detected and run automatically; however,
# if you want to do something unusual, a manual boot stanza may
# be the way to do it. This one does nothing very unusual, but
# it may serve as a starting point. Note that you'll almost
# certainly need to change the "volume" line for this example
# to work.
menuentry "My Mac OS X" {
icon \EFI\refind\icons\os_mac.icns
volume "OS X boot"
loader \System\Library\CoreServices\boot.efi
disabled
Thanks for suggesting to try older ISO.
UPDATE:- Most recent ls -R /boot and my refind.conf. Reading over Rod Smith's rEFInd documentation has helped me clean up a little more and set up a good boot manager with automatic kernel detection and shell. I do want to get rid of drivers list that shows itself up along with kernel. Next is to tackle menu entry. Thanks.
Last edited by donniezazen (2013-04-04 06:43:16)

My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop

My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop

You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
http://support.apple.com/kb/HT1455
Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard. I did a hard shut down, removed the drive and it went through a normal start up.

Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's

When I reboot my iMac I'll get hard disk selection instead of fast login and I am not using boot camp! Any help is greatly appriciated!

When I reboot my iMac I'll get hard disk selection instead of fast login and I am not using boot camp! Any help is greatly appriciated!

Have you selected which disk you want to boot from? In System Preferences, click startup disk and choose the drive you want as your default boot drive.

PowerPC G5 will not soft boot

My 2.3GHz dual core PPC G5 running 10.4.8 will not soft boot that is shut down using the restart and shutdown menu. I have to hard boot it to get it to shut down (holding down the power button on the front of the G5). I have rebooted with the shift key in safe mode with no luck helping with this shutting down the computer glitch. Any ideas would be appreciated.

Sounds as though, if you have a place to put a full computer content clone,
that is something you should try to do; if at all possible. Or use a second
computer to facilitate accessing this ailing one in FireWire Target Disk Mode
and work on saving whatever you can (to another drive; a bootable clone)
so later on, you can wipe the hard disk drive and or replace it; should this
odd issue really only be a failing hard drive or corrupted data on a drive,
all your stuff may not be a total loss.
The original boot-installer disc (DVD) should have the Apple Hardware Test
on it; some of those installers require you to boot while holding Opt key
down in order to see the startup manager menu with AHT option, & etc.
There are others who require a different key to be pressed to access AHT.
Do you have a new replacement hard disk drive on hand so you can put
a new HDD inside the computer, format it, and install a completely new
OS X, to test the computer's hardware from? That may be a home option.
Good luck & happy computing!

SUNFIRE V215 Will not auto boot on power restore.

Greetings. I have just purchased a new Sunfire V215. We have a script that automatically turns the server down if the UPS has lost power for more than 5 minutes. However, when power's restored, the server is not automatically powering back on. I have to press the power button on the front of the server. I have checked eeprom and alom settings and they all look correct:
eeprom:
if_network="false"
if_modem="false"
if_connection="none"
if_emailalerts="false"
sys_autorestart="xir"
sys_bootrestart="reset"
sys_bootfailrecovery="none"
sys_maxbootfail="3"
sys_xirtimeout="900"
sys_boottimeout="900"
sys_wdttimeout="60"
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="0.0.0.0"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="0.0.0.0"
mgt_mailhost=""
mgt_mailalert=""
sc_customerinfo=""
sc_escapechars="#."
sc_powerondelay="false"
sc_powerstatememory="true"
sc_clipasswdecho="true"
sc_cliprompt="sc"
sc_clitimeout="0"
sc_clieventlevel="2"
sc_backupuserdata="true"
sys_eventlevel="2"
-bash-3.00# eeprom
asr-policy=normal
test-args: data not available.
diag-passes=1
local-mac-address?=true
fcode-debug?=false
scsi-initiator-id=7
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
ttyb-rts-dtr-off=false
ttyb-ignore-cd=true
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=9600,8,n,1,-
ttya-mode=9600,8,n,1,-
output-device=screen
input-device=keyboard
auto-boot-on-error?=true
error-reset-recovery=sync
load-base=16384
auto-boot?=true
network-boot-arguments: data not available.
boot-command=boot
diag-file: data not available.
diag-device=disk:b
boot-file: data not available.
boot-device== disk0:a rootmir:a net
use-nvramrc?=true
nvramrc=devalias rootmir /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@1,0
security-mode=none
security-password: data not available.
security-#badlogins=0
verbosity=normal
diag-trigger=error-reset power-on-reset
service-mode?=false
diag-script=normal
diag-level=max
diag-switch?=false
scadm show:
if_network="false"
if_modem="false"
if_connection="none"
if_emailalerts="false"
sys_autorestart="xir"
sys_bootrestart="reset"
sys_bootfailrecovery="none"
sys_maxbootfail="3"
sys_xirtimeout="900"
sys_boottimeout="900"
sys_wdttimeout="60"
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="0.0.0.0"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="0.0.0.0"
mgt_mailhost=""
mgt_mailalert=""
sc_customerinfo=""
sc_escapechars="#."
sc_powerondelay="false"
sc_powerstatememory="true"
sc_clipasswdecho="true"
sc_cliprompt="sc"
sc_clitimeout="0"
sc_clieventlevel="2"
sc_backupuserdata="true"
sys_eventlevel="2"
Any help would be greatly appreciated.

Power is fully lost. The UPS shuts down. We are using powerchute software, but we don't want to rely on this. When the UPS gets to a certain discharge amount, we have a script that shuts down other servers and then shuts itself down. But again, when power is restored, it doesn't come up at all. I have to manually press the power button on the front of the server. I'm really beginning to be less and less a fan of Sun...They change all this crud on their new servers. It was hard enough just to get the APC to connect due to their changing of the serial ports on the servers. For the money, I should be able to do ANYTHING with this box.
Edited by: jchutch2 on Jan 10, 2008 3:10 PM

Could not read boot block (input/output errror) powerbook g4

Hello
My friend gave me a powerbook g4 and a copy of osx lion, I would like to install it but the internal hardive is not available within the "select Destination" area of the installation process. I tried to repair the disk which is labelled Disk0s1, but shortly after it is underway i recieve this message.
**/dev/disk0s1 could not read boot block (input/output error) Error: The underlying task reported failure on exit. 1 non HFS volume checked, 1 volume could not be repaired because of an error.
Within disk utilities the Disk01s is grey, I can try to repair it but the above error occurs. Do you know what the problem is and how I can fix it?

Since you are going to install system fresh, it sounds like, you should erase the drive. Boot from the installer disc, then select the language but do not start the installer. From the menu bar, you should have either an Applications or an Installer menu. From one of the menus, you can then start Disk Utility.
From the drives and volumes pane, select the internal drive hardware listing.
This will now allow you to partition or erase the disc. Now click the Erase tab and select Mac OS Extended (Journaled) as the format and then click the "Erase" button. You can name the volume that will actually be created, like for instance "MacintoshHD" or whatever you want.)
Once the erase has completed, you need to check the information for the hard drive at the bottom of the window. Be sure that the partition scheme is Apple Partition Map. If for some reason it is something else, like GUID, you won't be able to install MacOS on it. You will need to click the Partition tab, click the "Options..." button and select Apple Partition Map, then click the "Partition" button.
Once this is done, then you can quit Disk Utility and you should be able to install Tiger on that HD.

Hi guys, i updated my i4 with ios6.1 through my pc. but afetr update its not getting booted

Guys please help me in this problem, my phone is not getting booted, i just updated ios6.1, after updation its not booting

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
You might need to do a few times. Be patience.

My photoshop cc not you boot and I get a notice that says failed to start due to an unexpected end of file

my photoshop cc not you boot and I get a notice that says failed to start due to an unexpected end of file

See here:
Unexpected end-of-file

{Solved} Can not successfully boot into systemd

I will first start off by saying I have read though the following threads:
https://bbs.archlinux.org/viewtopic.php?id=151633
https://bbs.archlinux.org/viewtopic.php?id=151885
And have tried to follow the Systemd wiki. I started out by switching to the new initscripts configuration system. I have the current systemd package installed. I then installed systemd-sysvcompat which of course had me remove sysvinit. I then removed initscripts which moved my rc.conf to rc.conf.pacsave.
I had to manually create /etc/hostname, /etc/locale.conf, and /etc/vconsole.conf as (mentioned in a previous post) I could not do with any "ctl" commands as I had not yet booted into a systemd setup.
This also caused an issue with trying to set up the timezone as:
# timedatectl set-timezone America/New_York
resulted in:
Failed to issue method call: Launch helper exited with unknown return code 1
So at this point I decided to try a reboot and I get:
Welcome to emergency mode! Type "systemctl defualt" or ^D to enter default mode.
Type "journelctl -b" to view system logs. Type "systemctl reboot" to reboot.
Give root password for maintenance
(or typed Control-D to continue): [ 71.520184] radeon_cp: Failed to load firmware
"radeon/R300_cp.bin"
[ 71.520205] [drm:r100_cp_init] *ERROR* failed to load firmware!
[ 71.520224] radeon 0000:01:05.0: failed initializing CP (-2)
[ 71.520237] radeon 0000:01:05.0: Disabling GPU acceleration
I entered emergency mode which brought me to the root terminal. I first attempted to mv rc.conf.pacnew to rc.conf expecting there to possibly be an issue with the daemons I had running or attempted to run but after reboot I got the same thing. Not sure what is going on with the radeon firmware because it's obviously there.
So I re-imaged the hard drive and decided to try again. This time I installed systemd-sysvcompat (removing sysvinit) and DID NOT remove initscripts. I rebooted and got the exact same thing as above. So at this point I am at a loss of ideas with moving forward. Why is systemd-sysvcompat causing the failure of the radeon firmware to load? I use Arch on my laptop, desktop as well as my server. Systemd is coming so I am trying with the laptop first to convert to pure systemd. If I am just missing a step please let me know and I appologize for posting. But hopefully others have run into this issue and could possibly give me a nudge in the right direction. It could be I am reading the wiki wrong or just not interpreting it correctly.
Thanks in advance for your guidance and assistance,
All the best,
Ian
Last edited by ichase (2012-11-16 16:55:10)

hiciu,
Here is what you requested taken from emergency mode:
/etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect pata scsi sata filesystems usbinput fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
The next items due to length are linked to pastebin;
bsdtar -t -f /boot/initramfs-linux.img
http://pastebin.com/cZEJHVHm
dmesg
http://pastebin.com/MUGs1e9H
journalctl -b
http://pastebin.com/xgbfVJP8
This is a lot to look at so do know that I am very appreciative of you and any one else looking at these files taking your time to help me with this issue.
All the best,
Ian
Edit: I also wanted to mention that I was able to get rid of the syslog-ng errors previously mentioned by performing:
systemctl enable syslog-ng.service
Then rebooting. Granted I was still put back in emergency mode but was able to fix one issue.
Last edited by ichase (2012-11-16 03:33:41)

How do I tell Lightroom not to boot automatically?

When I load photos from my camera to my computer, Lightroom boots automatically and interferes with my loading. How do I tell Lightroom not to boot automatically under any circumstances? I cannot find that option in any menu.
John Johnson

Do one or more of the following solutions:
Solution 1: Turn off the Adobe Photo Downloader start-up item.
1. Right-click the Adobe Photo Downloader located on the far right of the Windows Task Bar.
2. Choose Exit.
Note: This turns off the Photo Downloader for your current Windows session, only.
Solution 2: Turn off the Adobe Photo Downloader permanently.
1. Choose Start > Run, and type in msconfig. Click OK.
2. Choose the Startup tab.
3. Uncheck apdproxy. Click Apply, and then click OK. Restart Windows.

Iphone 4s Boot Logo loop. Cant Restore

After installing 7.1.2 via the idevice, the phone is stuck in the boot logo loop. I have tried to restore with no luck.
HARD RESET DID NOTHING
Here is my error log I experienced through the process:
iPhone 4s CDMA log
iTunes 11.3.0.54
Windows 7 64 bit
iPhone4,1_7.1.2_11D257_Restore.ipsw
PeerBlock-DISABLED
AV Programs- DISABLED
** Normal Restore=click restore without shift**
Clean Host File
DFU Mode(No TSS): Normal Restore: Error 3194
DFU Mode(No TSS): Shift Restore:>Enters Recovery>Error 21
Recovery Mode(No TSS): Normal Restore: Error 21
Recovery Mode(No TSS): Shift Restore: Error 21
DFU Mode(With TSS): Normal Restore: Error 4014
DFU Mode(With TSS): Shift Restore: Error 4014
Recovery Mode(With TSS): Normal Restore: Error 11
Recovery Mode(With TSS): Shift Restore: Error 11
Changed Hosts to:
# 74.208.10.249 gs.apple.com
# 127.0.0.1 gs.apple.com
# 74.208.105.171 gs.apple.com
#127.0.0.1 gs.apple.com
# 74.208.10.249 gs.apple.com
# 127.0.0.1 gs.apple.com
#74.208.10.249 gs.apple.com
DFU Mode(No TSS): Normal Restore: Error 21
DFU Mode(No TSS): Shift Restore: Enters Recovery> Error 21
Recovery Mode(No TSS): Normal Restore: Error 21
Recovery Mode(No TSS): Shift Restore: Error 21
Cleared Hosts again because of Error 21:
DFU Mode(No TSS): Normal Restore: Enters Recovery> Error 21
Recovery Mode(No TSS): Normal Restore: Error 21
TURNED OFF FIREWALL
Recovery Mode(No TSS): Normal Restore: ERROR GOD **** 21
any ideas?

Have you tried a simple soft reset? Press down the lock button and home button until you receive the Apple logo and release?

Z77A-GD55 not booting(boot loop)

Similar Messages

Maybe you are looking for