Z87-GD65 - using onboard video card istead of PCI-E GPU

hello guys,
i have installed a GPU with this MB, but i would like to use the MB onboard video instead.
the GPU is working fine - but i am using it for processing parallelised code, and i do not want to use it for graphics.
is there an option in the BIOS that i can set to make this possible?
thanks,

hi
just checking..
am i to believe that there is no way of using the on-board graphics if a GPU is installed on the board?
thanks

Similar Messages

How can i allocate more RAM for my onboard video card on a 2011 macbook pro 13 inch running windows 7 via bootcamp

I noticed that since Macbooks.. macs in general use an EFI instead of BIOS. . .. Now i need to allocate some more RAM for the onboard video card since its currently running with an estimated 50mb.. I would like to increase this to 512 and cut the 3.95 down to 3.5 MB for the rest of the system ( allowing me to run more graphic intensive games and the such ... ) I know this could slow down the entire system.. ( i am aware of this ) and have gotten a 3rd party application to control and close out uneeded processes during gaming.. I just need more ram for my onboard video card.. Any help?

You don't allocate more RAM towards your video card, you put more RAM into the machine and hopefully some machines will bump the CPU graphics RAM allocation up a little.
The problem is you bought a integrated only graphics computer, if you want to 3D game you need a dedicated graphics computer with it's own or dedicated VRAM.
If your this serious about 3D gaming, your on the wrong platform.
Get a Windows 7 64bit i7 8GB RAM expandable 3D gaming tower with a good power supply and video card upgrade path, this way every few years you buy and stick in a new video card to play the latest games.
Mac's are not gaming machines and never will be because they would last too long if we could upgrade them.
http://www.cbscores.com/index.php?sort=ogl&order=desc

2012 macbook pro retina display artifacts on screen when using onboard video

2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
On top of that issue I also have had the ghosting issue.
Anyone else have this problem?

artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
There are a few retina owners who have faulty gpus.

Does page flipping use the video card?

How do I page flip? Does it use the video card or accelerate
Graphics? Can someone show me how its done?

bufferstrategy. look it up. its encapsulates that for you. also look up lwjgl.

Won't really see a video card in the PCI slots

I have a G4 MDD 1.23 GHz. I have a 32 MB video card in the AGP slot, but I also have 2 PCI 128 MB video cards lying around.
Every time I try to throw a PCI video card in, though, I have problems. The image is only 640 x 480 grayscale, nothing else. I tried to change the settings, but those are the only options.
I have a 3DFX Voodoo 2 and a TwinTurbo 128. Do I need drivers? Does the MDD not support video cards in the PCI slots? What's wrong with this picture?

For what it's worth, here's a few quotes:
[IX Micro Twin Turbo 128 video card, and I understand that OS X does not like that particular card|http://www.mail-archive.com/[email protected]/msg43189.html]
[The TwinTurbo cards are no longer supported by OS X (10.3).|http://forums.macosxhints.com/archive/index.php/t-30258.html]
[Just think of this along the lines of 3dfx's unsupport for the Voodoo3 on Macs.|http://www.insidemacgames.com/news/story.php?ArticleID=4213]
[Voodoo is not supported with OSX...but forget it for Jaguar and most other versions|http://www.mail-archive.com/[email protected]/msg02720 .html]

Mountain Lion change color profile when use discrete video card

MacBookPro mid 2010. Update Samsung SSD 830.
Mountain Lion 10.8.2 just installed (new installation).
Reset PRAM and SMC. Done. No result.
Try with GfxCardStatus. No result.
When the system uses the discrete video card changes the color profile.
I'm not the only one with this problem.
Someone managed to solve the problem (really)?
I DO NOT ACCEPT COMMENTS OR ANSWERS USELESS.
Sorry, but slightly altering after losing three hours in forums where no one ever answered ...
Thanks.
Stefano.

Let's see...
Sounds like you're running into an expected issue if you make an alias to removeable media. The same thing would happen if you made the alias to a folder on a DVD-R disc or CD-R. If you eject the original, you disable the alias.
If you copy the entire SD card volume to your drive, the PRIVATE package should copy across. Then, as a folder on your hard drive rather than a volume on removeable media, you could make an alias to the STREAM package for quicker access later.
I'm pretty sure that Handbrake, like Prmeiere Pro, can see the MTS files directly. That is, it's not dependant on the other folders in the PRIVATE directory sturcture. As such, you could copy the contents of the STREAM package to another folder on your drive. Just be mindful of the default MTS file names if you're using more than one SD card (you don't want to accidentally copy 00001.MTS from one card over 00001.MTS from another card).
As long as Handbrake sees MTS directly, you could even rename the MTS files after you've copied them.
On a side note, I almost always archive my SD cards with the data structure intact. More often than not, that file structure is important to corretly access the video stored within that structure. If something unexpected happens while working with the MTS files, it is good to have the original file structure to go back to. Although, SD cards are getting to be so low cost that sometimes I just label the SD card and store it for archiving.
-Warren

MSI GT70 2PC dominator not using dedicated video card

Hi well for the past two weeks ive been having fps and perfomance issues in games like diablo 3, path of exile, guildwars 2, but there was an interesting point in path of exile at the option select screen and it says choose adapter and its stuck using integrated graphics card this could be the problem for most of my games, of course i went to nvidia setting and chose to use the nvidia card as global and changed the setting to use it individually for each game, my nvidia drivers are up to date 344.11 i swear i thought it was something else causing these problems but i can be sure now that i saw this problem in path of exile, everything is set so games use the GTX 870m but i wouldnt be having these kind of problem if it were in use right? please i really need help here, there must be something wrong i bought this notebook 4 weeks ago for 1600$us from bestbuy, you know how i feel :( i just wanna play my games as smooth as possible!!!

Beside the update you should do, if the problem still remains, I'll suggest to roll back the graphics driver to the version from MSI website.
*Make sure that you completely uninstall all NVIDIA related programs in Control Panel> Uninstall a program before the installation.

Onboard video card with shared memory??

Congratulations Apple on the new Intel-based Mac Mini! I was patiently waiting the arrival of a faster version of the Mini.
However, I've noticed one horrible mistake. The Intel GMA950 graphics card is attached to the motherboard? What? Apple has decided to make there affordable systems even less gamer-friendly?
So what you're saying is that if you want to play World of Warcraft or any of the few powerful games designed for the Mac, you must purchase a system that is at least $1,300?
I just bought a Dell for $250 that runs World of Warcraft and other games rather smoothly. Hmm, lets see, $200 or $1,300? Which would you rather spend?
Seriously though, Apple needs to sit down and rethink there strategy for the gamers industry.
How about offering a system that has at least a 64MB video card (at least meet the MINIMUM latest game requirements) and is affordable (say under $1,000 even)?
The Apple Macintosh is indeed the Cadillac or Mercedes of personal computing when it comes to looks. But PCs are readily becoming more attractive (especially when comparing performance rating and prices).
Thanks,
James
An avid Mac fan since age 12 (my first computer was a Performa 400)

I've never heard of this before. Is it documented
anyplace, or on any Mac web site?
You can read about it in this Thinksecret article: http://www.thinksecret.com/news/0509macmini2.html . Also, if you look at the user comments on Amazon, you'll see a number of references by recipients of the silent upgrade machines.
From my system profiler:
Machine Name: Mac mini
Machine Model: PowerMac10,2
CPU Type: PowerPC G4 (1.5)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
And video:
ATI Radeon 9200:
Chipset Model: ATY,RV280
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x5962
Revision ID: 0x0001

PS CS5 claims my video cards have zero memory, no GPU access!

Hi folks
Firsrt post here. I hope some one can assist as I have been dealing with this issue for few days now. My hard drive died last week...had to reinstall everything. Now, for some reason Photoshop refuses to enable OpenGL access even though before I was able to use Photoshop with same video cards. I have reinstalled the app multiple times, reset prefs many times, installed various versions of my video card drivers (right now I am on the latest drive). I checked Adobe and NVidia sites and my cards are listed as supported. I checked Device driver (shows cards installed ok) and Windows sees my cards and I check Direct X diagnostics and it sees my cards memories.
Here are my specs:
Windows Vista 32
2 x NVidia Geforce 8800 GTX (have a 512 memory each, not running SLI)
4 Gigs of RAM
2 x 500 Gig WD drives
Wacom Cintiq as second display
I know my OpenGL works because I am able to run Modo fine. I checked in Device Manager and all seems ok.
Here is the top part of what Photoshop shows in Systems Information:
Adobe Photoshop Version: 12.0 (12.0x20100407
[20100407.r.1103 2010/04/07:14:00:00 cutoff; r
branch]) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:7,
Stepping:6 with MMX, SSE Integer, SSE FP, SSE2,
SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2793 MHz
Built-in memory: 2046 MB
Free memory: 652 MB
Memory available to Photoshop: 1643 MB
Memory used by Photoshop: 70 %
Image tile size: 128K
Image cache levels: 4
Display: 2
Display Bounds:= top: 0, left: -1600, bottom: 1200,
right: 0
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200,
right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce 8800M GTX
Driver Version: 8.17.12.7061
Driver Date: 20110408051400.000000-000
Video Card Driver:
nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800M GTX
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: NVIDIA GeForce 8800M GTX
Driver Version: 8.17.12.7061
Driver Date: 20110408051400.000000-000
Video Card Driver:
nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800M GTX
Video Card Memory: 0 MB
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe
Photoshop CS5\
Temporary file path:
C:\Users\Arash\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.5G, 825.0G free
Primary Plug-ins folder: C:\Program
Files\Adobe\Adobe Photoshop CS5\Plug-ins\
Additional Plug-ins folder: not set
Again, the only thing I notice is zero memory for my cards which seems odd.
I greatly appreciate some help.
Thanks

Update the video card driver, and if that doesn't work - talk to NVIdia.
We can only go by the values returned by the video card driver.

MOVED: Onboard graphic card simultaneous with PCI Express graphic card

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=161634.0

Hi,
The following link shows the specs of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03499587#N432
It clearly says:
*Integrated video is not available if a graphics card is installed.
Supports PCI Express x16 graphics cards.
Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
You don't need to disable the integrated video chip (or onboard video).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Flashed Z87 GD65 using Mflash, now system wont restart properly

ok so I updated to latest 1.B aka v1.1. I updated it to install a 4790k but didn't realize I wasn't meant to use M flash
the system runs fine, but will not restart correctly. just blank screens
ive downloaded the forum flasher & made a bootable usb stick.
now im seeing NPT method etc & im lost on what to actually do? whats fast boot & win 8 options mean too, bios settings?
I have the 1.b file but will it still flash? I don't want to brick it
pls help!
edit I reflashed the 1.B file using the forum flasher & still have the same issue
system specs are
4790k
16gb gskill ddr3 1600, I have tried setting the ram to correct timings too
3x r9 280x
240gb corsair force 3
1000w EVGA P2
what else can it be? it ran fine before I updated the bios & changed the cpu

Hi,
Quote:
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive (E7888IMS_150.rar) and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB from working bios.
G.) Once it booted successfully switch to the bad bios without powering down or rebooting
H.) Now follow the directions and let the tool flash the bad bios with 1.5
I.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_me10_mb.zip
Read few times if not understood
Ignore name of files mentioned in instructions, but use those from below.
But download latest OFFICIAL BIOS file from here:
https://forum-en.msi.com/index.php?topic=169827.msg1262015#msg1262015
[E7845IMS.160]
If you want, you can try latest which will be this one:
https://forum-en.msi.com/index.php?topic=169827.msg1308776#msg1308776
[E7845IMS.1B2]
If BIOS A is already bricked, you won't damage it by trying above.

[SOLVED] switching from onboard video to a pci express card

Hello,
I have an onboard video card [VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)].
I have been running the nouveau driver, but the video card is not truly supported so I bought a [VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)].
However my lspci -k | grep -A 2 -i "VGA" gives this:
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Kernel driver in use: nouveau
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: nouveau
Kernel modules: nouveau
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
And my xrandr -q gives:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
1440x900 59.9*+ 75.0
1400x1050 60.0
1280x1024 60.0
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.1 70.1 66.0 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
I receive no output from the second card at all. Any help to troubleshoot this problem would be greatly appreciated. I simply would like to use one monitor through the VGA port on the new video card.
thanks.
Last edited by forshark (2013-05-30 19:10:25)

Thanks for the reply,
My bios isn't awesome enough to allow me to disable onboard video or set a default card. I'll hunt around for the rest. Also I am using lxdm if that is helpful. Heres my Xorg.0.log:
[ 4.803]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4.803] X Protocol Version 11, Revision 0
[ 4.803] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 4.803] Current Operating System: Linux office 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 4.803] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8e550028-e5f5-40c2-b8f9-f43ac9ebf8ef ro quiet
[ 4.803] Build Date: 17 April 2013 02:37:06PM
[ 4.803]
[ 4.803] Current version of pixman: 0.30.0
[ 4.803] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.803] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.803] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 12:51:52 2013
[ 4.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.808] (==) No Layout section. Using the first Screen section.
[ 4.808] (==) No screen section available. Using defaults.
[ 4.808] (**) |-->Screen "Default Screen Section" (0)
[ 4.808] (**) | |-->Monitor "<default monitor>"
[ 4.808] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.808] (==) Automatically adding devices
[ 4.808] (==) Automatically enabling devices
[ 4.808] (==) Automatically adding GPU devices
[ 4.812] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.812] Entry deleted from font path.
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.813] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4.813] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.813] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.813] (II) Loader magic: 0x7fcc20
[ 4.813] (II) Module ABI versions:
[ 4.813] X.Org ANSI C Emulation: 0.4
[ 4.813] X.Org Video Driver: 14.1
[ 4.813] X.Org XInput driver : 19.1
[ 4.813] X.Org Server Extension : 7.0
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.816] (--) PCI:*(0:0:13:0) 10de:03d0:103c:2a6c rev 162, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 4.816] (--) PCI: (0:2:0:0) 10de:10c3:3842:1302 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 4.816] Initializing built-in extension Generic Event Extension
[ 4.816] Initializing built-in extension SHAPE
[ 4.816] Initializing built-in extension MIT-SHM
[ 4.816] Initializing built-in extension XInputExtension
[ 4.816] Initializing built-in extension XTEST
[ 4.816] Initializing built-in extension BIG-REQUESTS
[ 4.816] Initializing built-in extension SYNC
[ 4.816] Initializing built-in extension XKEYBOARD
[ 4.816] Initializing built-in extension XC-MISC
[ 4.816] Initializing built-in extension SECURITY
[ 4.816] Initializing built-in extension XINERAMA
[ 4.816] Initializing built-in extension XFIXES
[ 4.816] Initializing built-in extension RENDER
[ 4.816] Initializing built-in extension RANDR
[ 4.816] Initializing built-in extension COMPOSITE
[ 4.816] Initializing built-in extension DAMAGE
[ 4.816] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.816] Initializing built-in extension DOUBLE-BUFFER
[ 4.816] Initializing built-in extension RECORD
[ 4.816] Initializing built-in extension DPMS
[ 4.816] Initializing built-in extension X-Resource
[ 4.817] Initializing built-in extension XVideo
[ 4.817] Initializing built-in extension XVideo-MotionCompensation
[ 4.817] Initializing built-in extension XFree86-VidModeExtension
[ 4.817] Initializing built-in extension XFree86-DGA
[ 4.817] Initializing built-in extension XFree86-DRI
[ 4.817] Initializing built-in extension DRI2
[ 4.817] (II) LoadModule: "glx"
[ 4.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.822] (II) Module glx: vendor="X.Org Foundation"
[ 4.822] compiled for 1.14.1, module version = 1.0.0
[ 4.822] ABI class: X.Org Server Extension, version 7.0
[ 4.822] (==) AIGLX enabled
[ 4.823] Loading extension GLX
[ 4.823] (==) Matched nouveau as autoconfigured driver 0
[ 4.823] (==) Matched nvidia as autoconfigured driver 1
[ 4.823] (==) Matched nv as autoconfigured driver 2
[ 4.823] (==) Matched nouveau as autoconfigured driver 3
[ 4.823] (==) Matched nvidia as autoconfigured driver 4
[ 4.823] (==) Matched nv as autoconfigured driver 5
[ 4.823] (==) Matched nouveau as autoconfigured driver 6
[ 4.823] (==) Matched nvidia as autoconfigured driver 7
[ 4.823] (==) Matched nv as autoconfigured driver 8
[ 4.823] (==) Matched vesa as autoconfigured driver 9
[ 4.823] (==) Matched modesetting as autoconfigured driver 10
[ 4.823] (==) Matched fbdev as autoconfigured driver 11
[ 4.823] (==) Assigned the driver to the xf86ConfigLayout
[ 4.823] (II) LoadModule: "nouveau"
[ 4.823] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 4.826] (II) Module nouveau: vendor="X.Org Foundation"
[ 4.826] compiled for 1.14.0, module version = 1.0.7
[ 4.826] Module class: X.Org Video Driver
[ 4.826] ABI class: X.Org Video Driver, version 14.1
[ 4.826] (II) LoadModule: "nvidia"
[ 4.827] (WW) Warning, couldn't open module nvidia
[ 4.827] (II) UnloadModule: "nvidia"
[ 4.827] (II) Unloading nvidia
[ 4.827] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 4.827] (II) LoadModule: "nv"
[ 4.827] (WW) Warning, couldn't open module nv
[ 4.827] (II) UnloadModule: "nv"
[ 4.827] (II) Unloading nv
[ 4.827] (EE) Failed to load module "nv" (module does not exist, 0)
[ 4.827] (II) LoadModule: "vesa"
[ 4.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.828] (II) Module vesa: vendor="X.Org Foundation"
[ 4.828] compiled for 1.14.0, module version = 2.3.2
[ 4.828] Module class: X.Org Video Driver
[ 4.828] ABI class: X.Org Video Driver, version 14.1
[ 4.828] (II) LoadModule: "modesetting"
[ 4.828] (WW) Warning, couldn't open module modesetting
[ 4.828] (II) UnloadModule: "modesetting"
[ 4.828] (II) Unloading modesetting
[ 4.828] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.828] (II) LoadModule: "fbdev"
[ 4.829] (WW) Warning, couldn't open module fbdev
[ 4.829] (II) UnloadModule: "fbdev"
[ 4.829] (II) Unloading fbdev
[ 4.829] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.829] (II) NOUVEAU driver
[ 4.829] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4.829] RIVA TNT (NV04)
[ 4.829] RIVA TNT2 (NV05)
[ 4.829] GeForce 256 (NV10)
[ 4.829] GeForce 2 (NV11, NV15)
[ 4.829] GeForce 4MX (NV17, NV18)
[ 4.829] GeForce 3 (NV20)
[ 4.829] GeForce 4Ti (NV25, NV28)
[ 4.829] GeForce FX (NV3x)
[ 4.829] GeForce 6 (NV4x)
[ 4.829] GeForce 7 (G7x)
[ 4.829] GeForce 8 (G8x)
[ 4.829] GeForce GTX 200 (NVA0)
[ 4.829] GeForce GTX 400 (NVC0)
[ 4.829] (II) VESA: driver for VESA chipsets: vesa
[ 4.829] (++) using VT number 7
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (WW) Falling back to old probe method for vesa
[ 4.834] (II) Loading sub module "dri"
[ 4.834] (II) LoadModule: "dri"
[ 4.835] (II) Module "dri" already built-in
[ 4.835] (II) NOUVEAU(0): Loaded DRI module
[ 4.835] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 4.835] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.835] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 4.835] (==) NOUVEAU(0): RGB weight 888
[ 4.835] (==) NOUVEAU(0): Default visual is TrueColor
[ 4.835] (==) NOUVEAU(0): Using HW cursor
[ 4.835] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 4.835] (==) NOUVEAU(0): Page flipping enabled
[ 4.835] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 4.927] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 4.989] (II) NOUVEAU(0): EDID for output VGA-1
[ 4.989] (II) NOUVEAU(0): Manufacturer: HSD Model: 240f Serial#: 0
[ 4.989] (II) NOUVEAU(0): Year: 2010 Week: 52
[ 4.989] (II) NOUVEAU(0): EDID Version: 1.3
[ 4.990] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 4.990] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 4.990] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 4.990] (II) NOUVEAU(0): Gamma: 2.20
[ 4.990] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4.990] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 4.990] (II) NOUVEAU(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 4.990] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 4.990] (II) NOUVEAU(0): Supported established timings:
[ 4.990] (II) NOUVEAU(0): 720x400@70Hz
[ 4.990] (II) NOUVEAU(0): 640x480@60Hz
[ 4.990] (II) NOUVEAU(0): 640x480@67Hz
[ 4.990] (II) NOUVEAU(0): 640x480@72Hz
[ 4.990] (II) NOUVEAU(0): 640x480@75Hz
[ 4.990] (II) NOUVEAU(0): 800x600@56Hz
[ 4.990] (II) NOUVEAU(0): 800x600@60Hz
[ 4.990] (II) NOUVEAU(0): 800x600@72Hz
[ 4.990] (II) NOUVEAU(0): 800x600@75Hz
[ 4.990] (II) NOUVEAU(0): 832x624@75Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@60Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@70Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@75Hz
[ 4.990] (II) NOUVEAU(0): 1152x864@75Hz
[ 4.990] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 4.990] (II) NOUVEAU(0): Supported standard timings:
[ 4.990] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 4.990] (II) NOUVEAU(0): #1: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 4.990] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.990] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 4.990] (II) NOUVEAU(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 4.990] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.990] (II) NOUVEAU(0): #6: hsize: 1024 vsize 768 refresh: 66 vid: 18017
[ 4.990] (II) NOUVEAU(0): Supported detailed timing:
[ 4.990] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 4.990] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 4.990] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 4.990] (II) NOUVEAU(0): Serial No: 052AW1WY01107
[ 4.990] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 75 kHz, PixClock max 145 MHz
[ 4.990] (II) NOUVEAU(0): Monitor name: iP192A
[ 4.990] (II) NOUVEAU(0): EDID (in hex):
[ 4.990] (II) NOUVEAU(0): 00ffffffffffff0022640f2400000000
[ 4.990] (II) NOUVEAU(0): 341401030a291a78eade95a3544c9926
[ 4.990] (II) NOUVEAU(0): 0f5054bfee80950f90408180814081c0
[ 4.990] (II) NOUVEAU(0): 714f614601019a29a0d0518422305098
[ 4.990] (II) NOUVEAU(0): 360098ff1000001c000000ff00303532
[ 4.990] (II) NOUVEAU(0): 41573157593031313037000000fd0038
[ 4.990] (II) NOUVEAU(0): 4b184b0e000a202020202020000000fc
[ 4.990] (II) NOUVEAU(0): 006950313932410a0a0a0a0a0a0a0047
[ 4.991] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Output VGA-1 connected
[ 4.991] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 4.991] (II) NOUVEAU(0): Output VGA-1 using initial mode 1440x900
[ 4.991] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.991] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1024x768": 71.6 MHz (scaled from 0.0 MHz), 52.7 kHz, 66.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.992] (==) NOUVEAU(0): DPI set to (96, 96)
[ 4.992] (II) Loading sub module "fb"
[ 4.992] (II) LoadModule: "fb"
[ 4.992] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.023] (II) Module fb: vendor="X.Org Foundation"
[ 5.023] compiled for 1.14.1, module version = 1.0.0
[ 5.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.023] (II) Loading sub module "exa"
[ 5.023] (II) LoadModule: "exa"
[ 5.023] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.025] (II) Module exa: vendor="X.Org Foundation"
[ 5.026] compiled for 1.14.1, module version = 2.6.0
[ 5.026] ABI class: X.Org Video Driver, version 14.1
[ 5.026] (II) Loading sub module "shadowfb"
[ 5.026] (II) LoadModule: "shadowfb"
[ 5.026] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.029] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.029] compiled for 1.14.1, module version = 1.0.0
[ 5.029] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.029] (II) Loading sub module "dri"
[ 5.029] (II) LoadModule: "dri"
[ 5.029] (II) Module "dri" already built-in
[ 5.029] (II) NOUVEAU(G0): Loaded DRI module
[ 5.029] (--) NOUVEAU(G0): Chipset: "NVIDIA NVa8"
[ 5.029] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 5.029] (==) NOUVEAU(G0): RGB weight 888
[ 5.029] (==) NOUVEAU(G0): Default visual is TrueColor
[ 5.029] (==) NOUVEAU(G0): Using HW cursor
[ 5.029] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 5.029] (==) NOUVEAU(G0): Page flipping enabled
[ 5.029] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 5.060] (II) NOUVEAU(G0): Output DVI-I-1 has no monitor section
[ 5.068] (II) NOUVEAU(G0): Output HDMI-1 has no monitor section
[ 5.178] (II) NOUVEAU(G0): Output VGA-2 has no monitor section
[ 5.189] (II) NOUVEAU(G0): EDID for output DVI-I-1
[ 5.196] (II) NOUVEAU(G0): EDID for output HDMI-1
[ 5.249] (II) NOUVEAU(G0): EDID for output VGA-2
[ 5.249] (II) NOUVEAU(G0): Manufacturer: DEL Model: a00c Serial#: 808793676
[ 5.249] (II) NOUVEAU(G0): Year: 2004 Week: 47
[ 5.249] (II) NOUVEAU(G0): EDID Version: 1.3
[ 5.249] (II) NOUVEAU(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 5.249] (II) NOUVEAU(G0): Sync: Separate
[ 5.249] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 5.249] (II) NOUVEAU(G0): Gamma: 2.20
[ 5.249] (II) NOUVEAU(G0): DPMS capabilities: Off; RGB/Color Display
[ 5.249] (II) NOUVEAU(G0): Default color space is primary color space
[ 5.249] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 5.249] (II) NOUVEAU(G0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582
[ 5.249] (II) NOUVEAU(G0): blueX: 0.149 blueY: 0.088 whiteX: 0.312 whiteY: 0.328
[ 5.249] (II) NOUVEAU(G0): Supported established timings:
[ 5.249] (II) NOUVEAU(G0): 720x400@70Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@60Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@72Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@75Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@56Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@60Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@72Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@75Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@60Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@70Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@75Hz
[ 5.249] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 5.249] (II) NOUVEAU(G0): Supported detailed timing:
[ 5.249] (II) NOUVEAU(G0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 5.249] (II) NOUVEAU(G0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 5.249] (II) NOUVEAU(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 5.249] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
[ 5.249] (II) NOUVEAU(G0): Serial No: D82544BF056L
[ 5.249] (II) NOUVEAU(G0): Monitor name: DELL E153FP
[ 5.249] (II) NOUVEAU(G0): EDID (in hex):
[ 5.249] (II) NOUVEAU(G0): 00ffffffffffff0010ac0ca04c363530
[ 5.253] (II) NOUVEAU(G0): 2f0e0103681e17782eb060a1584f9526
[ 5.253] (II) NOUVEAU(G0): 165054afce0001010101010101010101
[ 5.253] (II) NOUVEAU(G0): 01010101010164190040410026301888
[ 5.253] (II) NOUVEAU(G0): 360030e410000018000000fd00384c1e
[ 5.253] (II) NOUVEAU(G0): 3f08000a202020202020000000ff0044
[ 5.253] (II) NOUVEAU(G0): 383235343442463035364c0a000000fc
[ 5.253] (II) NOUVEAU(G0): 0044454c4c204531353346500a200025
[ 5.253] (II) NOUVEAU(G0): Printing probed modes for output VGA-2
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Output DVI-I-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output HDMI-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 connected
[ 5.253] (II) NOUVEAU(G0): Using exact sizes for initial modes
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 using initial mode 1024x768
[ 5.253] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.253] (--) NOUVEAU(G0): Virtual size is 1440x900 (pitch 0)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 5.254] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.254] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 5.254] (II) Loading sub module "fb"
[ 5.254] (II) LoadModule: "fb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.254] (II) Module fb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) Loading sub module "exa"
[ 5.254] (II) LoadModule: "exa"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.254] (II) Module exa: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 2.6.0
[ 5.254] ABI class: X.Org Video Driver, version 14.1
[ 5.254] (II) Loading sub module "shadowfb"
[ 5.254] (II) LoadModule: "shadowfb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.254] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) UnloadModule: "vesa"
[ 5.254] (II) Unloading vesa
[ 5.254] (--) Depth 24 pixmap format is 32 bpp
[ 5.255] (II) NOUVEAU(G0): Opened GPU channel 0
[ 5.261] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 5.261] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 5.261] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 5.266] (II) EXA(256): Driver allocated offscreen pixmaps
[ 5.266] (II) EXA(256): Driver registered support for the following operations:
[ 5.266] (II) Solid
[ 5.266] (II) Copy
[ 5.266] (II) Composite (RENDER acceleration)
[ 5.266] (II) UploadToScreen
[ 5.266] (II) DownloadFromScreen
[ 5.266] (==) NOUVEAU(G0): Backing store disabled
[ 5.266] (==) NOUVEAU(G0): Silken mouse enabled
[ 5.267] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.267] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 5.267] (==) NOUVEAU(G0): DPMS enabled
[ 5.267] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.269] (II) NOUVEAU(0): Opened GPU channel 0
[ 5.273] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.273] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.273] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.276] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.276] (II) EXA(0): Driver registered support for the following operations:
[ 5.276] (II) Solid
[ 5.277] (II) Copy
[ 5.277] (II) Composite (RENDER acceleration)
[ 5.277] (II) UploadToScreen
[ 5.277] (II) DownloadFromScreen
[ 5.277] (==) NOUVEAU(0): Backing store disabled
[ 5.277] (==) NOUVEAU(0): Silken mouse enabled
[ 5.277] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 5.277] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.277] (==) NOUVEAU(0): DPMS enabled
[ 5.277] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.277] (--) RandR disabled
[ 5.444] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.444] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.445] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5.445] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.447] (II) AIGLX: Loaded and initialized nouveau
[ 5.447] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.456] (II) NOUVEAU(0): NVEnterVT is called.
[ 5.457] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 5.457] resize called 1440 900
[ 5.688] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.688] (II) LoadModule: "evdev"
[ 5.688] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.690] (II) Module evdev: vendor="X.Org Foundation"
[ 5.690] compiled for 1.14.0, module version = 2.8.0
[ 5.690] Module class: X.Org XInput Driver
[ 5.690] ABI class: X.Org XInput driver, version 19.1
[ 5.690] (II) Using input driver 'evdev' for 'Power Button'
[ 5.690] (**) Power Button: always reports core events
[ 5.690] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.690] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.690] (--) evdev: Power Button: Found keys
[ 5.690] (II) evdev: Power Button: Configuring as keyboard
[ 5.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.690] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.690] (**) Option "xkb_rules" "evdev"
[ 5.690] (**) Option "xkb_model" "evdev"
[ 5.690] (**) Option "xkb_layout" "us"
[ 5.771] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.771] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.771] (II) Using input driver 'evdev' for 'Power Button'
[ 5.771] (**) Power Button: always reports core events
[ 5.771] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.771] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.771] (--) evdev: Power Button: Found keys
[ 5.771] (II) evdev: Power Button: Configuring as keyboard
[ 5.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.771] (**) Option "xkb_rules" "evdev"
[ 5.771] (**) Option "xkb_model" "evdev"
[ 5.771] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event2)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event2"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.772] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 5.772] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 8)
[ 5.772] (**) Option "xkb_rules" "evdev"
[ 5.772] (**) Option "xkb_model" "evdev"
[ 5.772] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event3)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event3"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found 1 mouse buttons
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found scroll wheel(s)
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found relative axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing relative x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found absolute axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing absolute x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as mouse
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Adding scrollwheel support
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: YAxisMapping: buttons 4 and 5
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3/event3"
[ 5.773] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 9)
[ 5.773] (**) Option "xkb_rules" "evdev"
[ 5.773] (**) Option "xkb_model" "evdev"
[ 5.773] (**) Option "xkb_layout" "us"
[ 5.776] (II) evdev: Lite-On Technology Corp. USB Keyboard: initialized for relative axes.
[ 5.776] (WW) evdev: Lite-On Technology Corp. USB Keyboard: ignoring absolute axes.
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) keeping acceleration scheme 1
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration profile 0
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration factor: 2.000
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration threshold: 4
[ 5.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 5.777] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5.777] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 5.777] (**) USB Optical Mouse: always reports core events
[ 5.777] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 5.777] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d20
[ 5.777] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 5.777] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 5.777] (--) evdev: USB Optical Mouse: Found relative axes
[ 5.777] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 5.777] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 5.777] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 5.777] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 5.777] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4/event4"
[ 5.777] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 5.777] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 5.778] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 5.778] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 5.778] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5.778] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 5.778] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 5.778] (II) No input driver specified, ignoring this device.
[ 5.778] (II) This device may have been added with another device file.
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.779] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5.779] (II) No input driver specified, ignoring this device.
[ 5.779] (II) This device may have been added with another device file.
[ 7.250] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 7.250] (II) No input driver specified, ignoring this device.
[ 7.250] (II) This device may have been added with another device file.
[ 7.252] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 7.252] (II) No input driver specified, ignoring this device.
[ 7.252] (II) This device may have been added with another device file.
[ 7.254] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event8)
[ 7.254] (II) No input driver specified, ignoring this device.
[ 7.254] (II) This device may have been added with another device file.
[ 7.256] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[ 7.256] (II) No input driver specified, ignoring this device.
[ 7.256] (II) This device may have been added with another device file.
[ 7.258] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event10)
[ 7.258] (II) No input driver specified, ignoring this device.
[ 7.258] (II) This device may have been added with another device file.
[ 7.260] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event11)
[ 7.260] (II) No input driver specified, ignoring this device.
[ 7.260] (II) This device may have been added with another device file.
[ 7.270] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 7.270] (II) No input driver specified, ignoring this device.
[ 7.270] (II) This device may have been added with another device file.
[ 7.272] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.289] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.289] (II) No input driver specified, ignoring this device.
[ 7.289] (II) This device may have been added with another device file.
[ 16.144] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.144] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 16.144] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 16.144] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.979] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.979] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.979] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.979] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.982] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.984] resize called 1440 900

HP 6300 using the built in video card and a quad card to support 6 monitors.

I am try to configure a HP 6300 Micro Tower to support 6 monitors. I have installed a NVIDIA NVS510 card and installed it but not the built in video card is disabled how do I enable both cards to work at the same time?
This question was solved.
View Solution.

Hi:
Below is the link to the service manual for the Pro 6300.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03612810/c03612810.pdf
Please take a look at chapter 3, page 23.
There is a bios setting to enable/disable the onboard video.
Integrated Video (enable/disable). Use this option to disable the integrated video controller
when another video controller is present in the system. Default is enabled.
My assumption is that when you add a PCIe x16 video card, the onboard video is automatically disabled in the BIOS.
See if you can change the O/B video setting back to Enabled to see if that will allow both video devices to work at the same time.
If the setting is grayed out or it enables the onboard video but disables the PCIe x16 card, then I guess it can't be done.

Pm8m-v need to use agp video and onboard vide

I recently purchased an MSI pm8m-v motherboard. This motherboard has an onboard video card. I have an nVidia GeForce FX 5200 AGP video card. I also purchased a PixelView PlayTV MPEG 2 TV capture card. I want to have two monitors so I can put the TV display on one monitor and work on the other monitor. The problem that I'm having is that the onboard video card is automatically disabled when the nVidia card is in the AGP slot.
How can I enable the onboard video card when there is an AGP card in the AGP slot?

Usually, the mainboard VGA will be disabled automaticly when you plug other Video card in the mainboard. But sometimes, there will be some items for you to choose to the VGA you are uing. So maybe you could check in the bios/Integrated Peripherals to see whether there is some ralated items. Maybe you could enable both of the onboard VGA and other vgas. If that there is no such item, then you could only use one of them. If in that case, you may check whether there are interfaces both for TV and CRT.

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

Z87-GD65 - using onboard video card istead of PCI-E GPU

Similar Messages

Maybe you are looking for