ZBook 14 - Can't change screen resolution after update

After I installed some software updates the Laptop was suggesting me, my screen resolution went suddenly from 1900x1200 to 1200x720 after reboot, and it doesn't let me change it, not even to a smaller resolution. I am quite frustrated, because I will need the computer next week for visualization works and I really need the display working well. 
It doesn't let me change the resolution. The display and graphics drivers are up to date and working properly, according to the device manager. I made a system recovery, but that just made everything worse although the resolution thing worked again, I had to run a startup repair several times before my laptop would boot propery again. This didn't solve the issue, since the display drivers weren't working properly (videos were being visualized very poorly) and even after updating them the computer wouldn't start up again, so I had to made another system recovery and now I am back to the point where I can't change the resolution and is starting to be really frustrating.
Thanks for any help anyone can offer.

Hello @hellmet,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook computer is not able to change its display settings, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards  
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Can Flash Change Screen Resolution??

    Dear All,
    i didn't find a complete way to change the screen resolution
    in flash?? is it any solution to do it without third party programs
    Please Advice

    Not that I know of. In general the developers of Flash
    realized that a lot of people really dislike having there systems
    mucked with – you know installing viruses, changing
    resolution, editing the registry, etc.

  • Screen resolution after update

    Hi, everyone:
    I updated my Solaris x86 from 01/06 to 06/06. After reboot, my screen becomes mosaic. Before my update, I can login with Java Desktop. Now I cannot. I tried edit my grub to boot to single user mode. But I cannot locate kdmconfig. Is there any other way that I can get the resolution right again?
    Thank you for your help.
    zoom

    Hello @hellmet,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your notebook computer is not able to change its display settings, and I would be happy to guide you towards a resolution!
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
    http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
    I hope this helps!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Changed screen resolution in error

    I accidentally changed the screen display for the mac mini and it went black and now says "please change display resolution." How can I change the resolution without seeing the display?

    Hi
    I have the same problem as Henryhbmains and I have tried exactly what you describe without positive result.
    One thing I do not understand is that Apple OSX does not have a "safety switch" like in other operating systems where you have to confirm within 15 seconds or the screen resolution will automatically switch back.
    I have now wasted a lot of time and what I hoped to be my first time happily with a Mac turned out to be my first time with a Mac wasting a lot of time and getting so disappointed.
    Would you have any other suggestions - that would be very helpful
    Thank you

  • Change Screen Resolution GNU/linux

    hi everyone
    i need to change screen resolution for my linux box.
    with command #xrandr
    showing only 640 X 480,can i add more size?how to add?
    tq

    Hi,
    Use this forum for feedback about OTN programs, Web site content, and systems - product-related questions will be deleted.
    Please post your question in the appropriate forum.
    Oracle Enterprise Linux
    Oracle Linux
    Linux (non-OEL)
    Generic Linux
    Thanks,
    Hussein

  • How to change screen resolution on touchpad

    how to change screen resolution on touchpad ?i was working on my tp and out of the blues  my screen looks like it is at 800*600
    or is this the screen itself that went bad?
    can someboby please tell me the procedure to use the 12 mt warranty..
    tia
    Post relates to: HP TouchPad (WiFi)

    Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they  are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
    Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How do I change my resolution after iTunes has changed it to a lower ppi

    I am using Win7 with an iPad. When I first logged onto iTunes the site changed my resolution. It is now lower than is should be. I have two screens, a lap top and a 17" monitor. When I slip one page from the laptop to the larger screen i lose about 1/5 of the width.
    I can't change the resolution to what it optimally should be for my system. How do I fix this?
    I love my iPad and the Apple Store. But this is reminiscent of MS making a system operate how MS thinks it should operate instead of how the user wants it to operate.
    thnx

    It's not possible to comment unless you would like to post the URL of your feed.

  • Another feature to allow users to change screen resolution to HD for gaming

    I liked k3 Note, smartphone which is filled with lots of professional features. Can you add a control to change screen resolution to HD for games. Lots of people are there which are thinking that other phones' gpu are better and the Mali t760 m2 not so good.

    Hi
    In case someone else encounters the same problem, here is some more information.
    The high refresh rate is quite visible in Device Manager. It would refresh every one or two seconds. The cause seems to be a conflict between a Fingerprint software installed during the Task sequence and the Validity Sensors Drivers.
    I made a Scan for hardware change in Device manager and saw that a few devices were appearing as unknown. Right click, update drivers from local cache solved the problem.
    I cancelled install of the fingerprint software and did not encounter the problem anymore.
    Brgds
    bruno

  • I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

    I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

    Have you tried doing a Restore?
    For some problems the solution is to download & reinstall iTunes.
     Cheers, Tom

  • Problem to change screen resolution in MB Intel DG41 with video on board

    Hi, I need some help as soon as possible because this problem it´s make me difficult my job. I have installed the MAC OS Snow Leopard 10.6.2 in a Motherboard Intel DG41 with micro Core2Duo and video on board of this motherboard and don´t let me change screen resolution. I have a display of 22´ inches and the panel to change the screen resolution only mark 1024x768. I think the more likely it is that the system does not recognize me the drivers to this chipset of video. I searched everywhere on the internet but I have not found the solution.
    Thanks Fernando

    First of all sorry for my English is not very good. My PC is an Intel MotherBoard DG41 with onboard video and a micro Core2Duo. The system is MAC OS Snow Leopard 10.6.2.
    Thanks for replying

  • Change Screen Resolution or not Change Screen Resolution?

    I mean is it possible to change screen resolution with Java?
    I read some topics (not in this forum) that is impossible. I know there is a method to set at full screen a frame with the favourite resolution but does it effectively exist a method to set the screen with a favourite resolution?
    For example:
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setUndecorated(true);
            frame.setIgnoreRepaint(true);
            device.setFullScreenWindow(frame);
            if (displayMode != null && device.isDisplayChangeSupported()) {
                try {
                    device.setDisplayMode(displayMode);
                } catch (IllegalArgumentException iae) {
                    System.err.println("EX: " + iae);
            ...the device.setDisplayMode(displayMode) always throw me an exception: Invalid Display Mode (or something like that) with all permitted display modes (640by480, 800by600, 1024by768, etc...), with all permitted refresh rates, with all permitted color depths.
    Illuminate me please!
    Thanx in advance!

    Hi,
    I think i you should check this link
    http://forum.java.sun.com/thread.jspa?threadID=624649&messageID=3554316
    with help of above link you solve your problem of screen resolution
    but problem with above code is when you apply on frame that's ok but is you add any JDialog to that frame then JDialog and move JDialog with mouse dragged and dropped
    then dialog is invisibly run .
    you check this i you find any solution please post that it's urgent

  • How we can recover the screen resolutions on maverick

    how we can recover the screen resolutions on maverick

    Hi
    Deleting invoice is a data base action that deletes the record from the table and won't right these records to any history tables. The only way is to re enter the invoice from hard copy. Where as Cancel invoice will behave differently.
    Is it manual invoice or invoice created from ERS etc?

  • How can we change screen appearance option in PSE10?

    How can we change screen appearance option in PSE10?

    It's been on my wants list forever, but I don't work for Adobe. This is a user to user forum and the few employees who post here are labeled as such.

  • How can I change the country after a massage saying that check the security code

    How can I change the country after a massage saying that check the security code

    Massage?
    Why not ask the masseuse who gave you the massage?

  • How can I change screen capture format from .png to .jpg in LION

    how can I change screen capture format from .png to .jpg in LION. The "terminal" suggestions of the past don't work? Thanks!

    This works for me:
    defaults write com.apple.screencapture type XXX
    where XXX is one of png, pdf, jpeg-jfif, jpeg 2000, tiff, pict, bmp, gif, psd, sci, or tga. You need to log out and back in for the change to take effect.

Maybe you are looking for

  • Why do my applications keep unexpectedly closing?

    Everytime I open an application on my mac book pro it automatically sends me to an error message saying "insert name of application" quit unexpectedly click reopen to open the application again. This report will be sent to Apple automatically. Once i

  • Empty init() methods

    I am currently working on and cleaning up (old) Java servlet code that I inherited from another collegue. In a lot of the servlets, I find empty init() methods like: public void init() { }As a novice to Java servlets, I have just been reading the Fir

  • What are the unique features of Coherence than other Gird technologies ?

    Hi, We have been using Coherence all along. But now we have got a POC to comapare coherence with eXtreme Scale. Can some one let me know what are the extra/added features of Coherence ?

  • Minimum l Stock  level

    Guru My client as maintained the Minium level stok in MRP2 view in material masterIs it posiable to to issue the material below level if not is their special setting or configration is their Pl guide me i Thanks Sudhir

  • Synaptics: "TapAndDragGesture" "false" delayed

    Hello, I'm facing a weird problem since a long time. I have disabled "TabAndDragGesture" and it used to work, but don't know why, now is draging again, but just for some milliseconds, then it turns off, as if it's delayed. So I can still drag, not to