Zebra label - text without space.

Used BAR-ONE for SAP. Create an ITF file, that was uploaded into a SapScript layout. With the output of the lable the text areas even free text contains no spaces between the different words example "Please Help" get printed as "PleaseHelp".

Hi,
Check the following link:
http://www.sap-img.com/sapscripts/sample-sapscripts-label-printing-program.htm
you will get one sample program of sample label pring program.
hope it help you.
Regards,
Bhaskar

Similar Messages

My Labels Print without spaces ?

I am printing avery labels that were produced by the "label assistant.
All good... except when I print the label items print without spaces.
Like This:
JamesHammil
123MainStreet
AlbuquerqueNM87111
Any Ideas how to fix this?

Duuuu I figured it out.
Sorry

Copying selected text results in text without spaces.

When I select and copy text from most PDFs and paste it tome some other app, the resulting text has no spaces between words.
Example:
Littleworktodateinsentimentanalysi
Whereas in other app that uses iOS buil in:
Little work to date in sentiment analysis
The weird thing is that in some documents I am able to copy paste from Acrobat correctly.

Do you have thar Persian font in your system? If you don't, copy and paste will produce only garbage.

How can I get an Extension's toolbar icon to display image without text (without universally affecting other icons)? How can I edit the icons text (save space)?

"From the Show dropdown menu, you can choose what to display in the toolbars: icons, text, or icons and text together. By default, Firefox shows icons only." Is there a way to choose an individual setting for a specific toolbar icon to be icon only (no text) without universally affecting all other icons on the toolbars?
Second, is there a way to edit the text on a specific toolbar button from an extension (because it occupies too much horizontal space on the toolbar due to the amount of text)? I do know how to locate the xpi file & open it with notepad, but then it's mainly code (not English) & FIND doesn't locate the button's text (to edit it).
These 2 questions should apply to Extension buttons in general. However IF it makes any difference I'm referring to the Toolbar Button in Back To Top 7.0 which says "Go to top/bottom". I'd at least like to edit out "Go to", but my questions apply to other Extension buttons too. I do realize it may be necessary to redo any fix/change each time there is an update? THANK YOU.

We use the DOM Inspector to find the IDs and Class Names of elements.
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/
The DOM Inspector (DOMi) has a menu item (Edit > Select Element By Click) and a toolbar button "Find a node to inspect by clicking on it" (left icon on the toolbar in the DOMi).
* open the browser window in the DOMi (File > Inspect Chrome Document) and choose the first from the list.
* click the "Find a node to inspect by clicking on it" button and use the keyboard (Alt Tab) or the Task bar to go back to the browser window (do not click in the browser window other than the title bar).
* click that element with the mouse and keep the button pressed until you see a red border to indicate the the DOMi has located that element in the DOM tree.
* https://developer.mozilla.org/en/DOM_Inspector/Introduction_to_DOM_Inspector

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

Issues with Crystal 2008 Printing to a Zebra Label Printer with SP2

Hi there
We are having issues printing to a Zebra Label Printer using Crystal 2008 SP2.
When you attached a .rpt file to the .NET Application which is accessed via RDP/ICA the reports in Crystal XI worked fine.
Steps we have taken are:
Printing direct from Crystal 2008 Designer to the Zebra Printer works using a Generic Text Driver
Printing direct from Crystal 2008 Designer to the Zebra Printer using a Zebra Universal Print Driver DOES NOT work (we were advised the Universal Print Driver may assist with the issue)
The report when accessed via the .NET Application via RDP/ICA using the Universal Print Driver it doesn't work.
The report when accessed via the .NET Application via RDP/ICA using the Generic Print Driver it doesn't work.
The report when accessed via the .NET Application drectly from Server Console prints fine using Generic Print Driver, but not with RDP/ICA.
Can anyone offer any suggestions to a fix?
Many thanks.

Hello,
I'll look at this tomorrow when I get into the office. An I am moving this to the developer forum.
Thank you
Don

Problem Printing Labels on Zebra label printers

Hi Every one
(there may be old solution for my problem, if there is, point me
to that)
my environment is oracle 6, windows 2000. server is runnig on
windows NT.
I am generating labels using oracle reports 6 for an application
customised for pharmaceutical company. report has driver report
calls another label generator report. no matter from where i
print the report to zebra S400 label printer, my report builder
crashes. if i run the report from rep file in application, my
application crashes. if i save the report to a pdf file and
print it using acrobat reader, it prints perfectly. if i use any
other application like access, vb etc. they generate label and
print without any problems.
i have the latest windows 2k drivers for the printer. i also
have tried re-install oracle cleint on my pc. the result is
same. applications crash when print using oracle report to label
printer?
has any one come across such a problem? is there a solution for
it?
zebra label printers are pretty much a standard and are being
used in allmost all the client location that my deals with. and
they (printers) number in 1000's. in most of the cases labels
are generated using zpl language in ascii, but why cant oracle
reports print report generated labels to these printers?
zebra has no comments on this, but they demonstrate their
printer capabilities using all other windows based applications
and point back to oracle reports for the problem.
i appreciate any solution, lead, tip to overcome this problem.
thanks and regards
shiv(anand)
dcss, houston

hello,
i would strongly suggest, you consult the metalink knwoledge
base and seach for existing problems. if you can not find
anything, contact oracle support services.
regards,
the oracle reports team --pw

Rotating text without embedding fonts - how?

No doubt same or similar question was asked and most likely answered but I could not
find anything that would match...
I want to draw column headers of my ADG vertically. So, I need rotate column text 90 degree
and adjust position.
Is it true that it can be achieved with embedded font only? If it is true how can it be done for
Unicode code, which includes ranges for Japanese, Chinese, etc characters. The size of
swf is going to be huge. Several sites like this
http://www.forestandthetrees.com/2009/06/29/rotating-text-without-embedding-fonts/
claims that they have a solution for the problem without embedding fonts.
Note: I am still using Flex 3.3 SDK with no TLF. By the way, do TLF libraries work with
3.3 SDK.?
Thanks in advance

Draw your text onto a bitmap image (or take an ImageSnapshot of a Label), then rotate the image.

Need code example for setting a label text

Hello,
Lets say I have a label called testLabel and I would like to put it's text at the doInit() method of my view.
How do I do that?

Hi Roy,
if you want to set the label directly without setting it thru context variable then its part of the dynamic programming of WD. So u can do that only in wdDoModifyView method. Obtain the reference of the label object from the view object and set the text property of it with the desired value.. like below
public static void wdDoModifyView(IPrivateImageAppView wdThis, IPrivateImageAppView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
    IWDLabel myLabel = (IWDLabel)view.getElement("testLabel");
    myLabel.setText("Hello this is a Label");
    //@@end
this should solve ur problem...
regards,
Shubhadip

Overwrite Label Text

Hi,
I want to overwrite a Label Text.
The Text I want to overwrite comes from a bound Context Node.
Before I want to overwrite it I need the current Text, because I want to change Labels dynamically - however to get the actual Text I use Method GET_TEXT of Class CL_WD_LABEL but this Method sets some Attributes (which seems to be an error for my understanding of OO Concepts) anyway it seems not possible to overwrite the Text with Method SET_TEXT after calling GET_TEXT method (GET_TEXT will call the Bound Attribute after 1st call).
Any ideas?
TIA,
Sebastian

Hi,
I want to change n-Lables
And I want to do it like that: Loop at every Labels of a View and Replace every Occurance of "Oracle" with "SAP" (for example)
But if the Label I want to change the text for is bound to a Context Element with an DDIC-Type the GET_TEXT Method (which I need for dynamic text changes) will set Parameters in the Label class which will always will get the old text (on next GET_TEXT call) never mind what text I assigned with SET_TEXT.
But without a GET_TEXT I will not get all "Oracle" lables and so I can't replace the Texts I want to.
Hope I could explain my Prob
Regards,
Sebastian

I not read label text color

Dear Support,
I am legally-blind and deaf, I bought ipad3 last month, I setup enabled White & Black and Triple-click is Black/White, I make and save solid black.jpg and solid white.jpg in ipad3, click wallpaper done... start Lock see black (good) then home, i see icon with white text and black background, good, I click setting, mail, message are white background, I can't read I press triple-click switch black, I see it when finish press Home back white background, I press triple-click back black, I am not happy lot of triple-click, I am worries button will be broke soon.. but I got idea change white.jpg, switch to black background, i press lock good, then home is bad, black background is ok but I not read white text on icon, it is blank, I press seeting, mail, message are good no need triple-click but I need how fix change color on label text label ?
I search website I type "change label text icon", I saw many had it but it is jailbreak, I don't want it, because void of warranty
any fix label text icon?
help me?
Thank out
Richard

I am pretty sure that I understand what you are trying to do, but I do not know of any way that you can change the color of the text on the app icons. Your only options are black on white - or the standard white text labels.
As you have discovered, there is no way to change how the iOS works without modification of the device and you know that voids the warranty and it could cause even more problems down the road.
I'm sorry, but I think that you will have to take a chance on the triple clicks. The iPad does come with a one year warranty and Apple has built the Accessibility feature into the iPad knowing that the triple click will be used by people such as yourself. I would not hesitate to use the feature.

The lower row of my iphone does not respond to tapping. i.e. texting; the space bar, return

The lower row of my iphone does not respond to tapping. i.e. texting; the space bar, return and number tabs and for phone; emergency, 0, and delete tabs.
I've updated my phone, turned it off and on, charged it. Nothing. Help!

Sounds like a hardware problem. When you updated, that would have wiped the device and installed the latest iOS, thus pretty much eliminating a software issue. You could try to restore as new, i.e. without your backup and see if it works factory fresh. If still a problem, it's most likely a hardware issue.

Disabling selecting label text

Hi
I just noticed that by pressing on a label on a touch screen devices the text become selected. Only way I found was to cover the label with rectangle. However the rectangle reduced gallery performance specially on surface2 device. So is there
any solutions to disable selecting text without disabling whole label? I'm using label OnSelect behaviour so I can't disable whole label

Hello,
Similar for round buttons which look "smart" when developing for touch.
For now I duplicate the function in the label and the shape but that's removing some of the cooler effects you can default on a button (press, etc.)
Regards
StonyArc
http://www.stonyarc.com http://www.xboxlivenation.com

Zebra Label Printing - DPI issue.

Hi Guru's,
I have a script for Zebra label printing. its an old script working fine. Now the issue is:
The above script is printing labels for 200 dpi printers as per the requirement.
Now one of the Markets have purchased 300 dpi printer. When the print the same label using the new printer using the script, they are getting the Label compressed.(i.e.. the Script is now much smaller and aligned to the left top corner, no data is missing but the Lettering is compressed and not occupying the total space alloted on the label).
I have chcked the manual for Zebra label printers, but could not solve my issue. Can any one of u help me. Thank you.
Here is extract of script used for initialisg the label:
/:   NEW-PAGE
/    ^XA
/    ^PW1200
/    DFI128FS
/    ^PRC
/    LH0,0FS
/    ^LL1500
/    ^LT12
/    ^MD0
/    ^MNY
/    CW1,B:CGTRI_NCW2,B:CGTRI_ICW3,B:CGTRI_BCW4,B:CGTRI_J^CW5
=    ,B:CGTRCO_NCW6,B:CGTRCO_ICW7,B:CGTRCO_J
/    LH0,0FS
Can anyone of you check this code & tell me where exactly the 'DPI' issue is handled in the script. Also any additions to the above script to acheive the solution....
regards,
Chaitanya L

Hi Balakrishnachaitanya,
i've made just a couple of sapscript whit the ZPL language, and i dont't think that you can set the DPI of print,
maybe you have to set the printer' settings.
Regards,
Davide

Count word without space in C#

Dear sir,
I would like to count word in sentence without space in c# but I could not solve this code.Please solve this one coding is below
int i = 0,b=0;
int Count2 = 1;
for (i = 0; i < Paragraph.Length; i++)
if (Paragraph[i] == ' ')
for (b = i; b < Paragraph.Length; b++)
if (Paragraph[b] != ' ' && Paragraph[b] != '\t')
Count2++;
break;
Console.WriteLine("Total Word = {0} .", Count2);

Dear Sir,
I want to count words without space in a Sentence but I face a problem that when I run the program space is also count with words but I want count only words Please guide . My C# program is as under .
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Text.RegularExpressions;
using System.IO;
namespace Static_Method_Count_Word
class Program
static void Main(string[] args)
Console.WriteLine("Please Enter Any Paragraph .");
string Paragraph = Console.ReadLine();
Count.Coun(Paragraph);
Console.ReadLine();
class Count
public static void Coun(string Paragraph )
int i = 0,b=0;
int Count2 = 1;
for (i = 0; i < Paragraph.Length; i++)
if (Paragraph[i] == ' ')
for (b = i; b < Paragraph.Length; b++)
if (Paragraph[b] != ' ' && Paragraph[b] != '\t')
Count2++;
break;
Console.WriteLine("Total Word = {0} .", Count2);

Zebra label - text without space.

Similar Messages

Maybe you are looking for