ZEN 4 GB + SDHC APACER 16 GB (needed to be inserted when the ZEN is turned on)

Hi there,
after using the Cowon D2 i am quite shocked with the ZEN player, but have to solve some issues....
Some cannot be solves, like the copying via internal and external memory, "expension" of SD without player funcionality, some other bugs
The?Cowon D2 have not such a bugs, but this is not an advertisement. I bought the player for my friend, and I am sorry that I havent bought her the same player....
anyway...
I have this problem...
The card works well when copying, playing from browse "thing". But when I turn off the ZEN and turn it on and select Memory it behaves like there is no card... when I reinsert the card while the ZEN is turned on, it will access the card until i will turn that thing off again... quite irrating
I havent formatted the card, as it works with the Cowon D2 without any issues (which has the integration of slot in player's library)
I will format the card and when it is solved I will let you know...
The strange thing is... Sometimes the Card works on even after turning off, and turning on the ZEN.... but this "certainty" happens once in 5 times...
Thanks in advice

If your player fails to restart after the firmware upgrade:
1. Turn off your player.
2. Disconnect your player from your computer.
3. Press and hold the Play/Pause button. Continue to hold the button while you perform steps 4 and 5. If you accidentally release the button, start the procedure again.
4. Gently push a straightened paper clip into the Reset hole.
5. Slide the On/Off switch towards the USB port and hold until the display lights up. The Recovery Mode
screen appears with four options: Clean Up, Format All, Reload Firmware, and Reboot.
6. Select Reload Firmware, followed by Yes.
7. Connect your player to your computer.
8. Double-click the downloaded file and follow the instructions on the screen.
try follow the instruction. you need to press the button the plug in the reset button for a while. then you try on the player

Similar Messages

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Need to show popup when the Submit button is clicked for the second time ..

Hi guys,
I have a requirement where i need to show a popup or alert when the submit button is clicked twice . When it is clicked for the first time one method is been called and its process starts. When the user clicks the submit button for the second time they should be shown a popup stating "Submit button already been clicked, please clicked OK to continue".
Can anyone help with this please , its really urgent requirement ?
Thanks in advance

Hi,
I dont have any sample code to give you now. For quick reference, I can advice some psuedo steps to achieve your requirement. I dont have access to JDEV to test this. If any syntax errors then pls correct yourself.
1. Extend Controller since it is standard page ( Refer Anil Passi site for steps to extend seeded ontroller)
2. Write below logic in your Process Request method
super.processRequest(oaPageContext, oaWebBean);
pageContext.putSessionValue("status", "notInitiated");
3. Include below logic in your PFR method
if(pageContext.getSessionValue("status")!=null){
if("notInitiated".equals(pageContext.getSessionValue("status")))
super.processFormRequest(oapagecontext, oawebbean);
pageContext.putSessionValue("status", "initiated");
else
String message = "Display error message as required";
throw new OAException(message, OAException.ERROR);
You may need to import required packages ( Related to OAException).
Remeber, to sumbit the request, user need to refresh the page again so that "status" variable will be refreshed.
Hope it helps.
Thanks
venkat

System needs to approve automatically when the same user has different role

Hi Gurus,
My issue relates to approval in Shopping cart.
Say this is my Issue.
This is the Approval detemined by the system.
1 - X
2 - Y
3- Z
4- X
5- Y
X & Y are the Same user but with different role in the Approvals.
First time 'X' would get the cart to approve it manually but second time system should automatically approve it. Same should happen for 'Y' as well. So now both X & Y needs to approve the cart only once.
Please advice me how to approach this issue or If anyone experience the same kind of issue please let me know how to resolve.
Thanks for your time to spend on it.
Thanks,
SNMPkumar

Hi,
You can handle it with N-Step BADI Workflow.
Regards,
Masa

Time and date need to be reset when the battery dies

Any help on fixing this issue? Computer gives the warning that the power is running low, then turns off with 6% battery left. When I power it up the system needs to reboot completely and each time the date and time need to be reset.. Why is this?

That battery is relatively healthy, say relatively due to the high cycle count, the number of full charge cycles it has had. The lower capacity simply reflects the high number of charge cycles and is not an issue, only a measure of how long the MacBook will work when running on battery power. The voltage is right where it should be for a MacBook, in the range of 11.5 to 12.5 volts...12.3 volts is a strong battery.
Now to the auto-shutdown for lack of a better term - that sounds a lot like something loose inside the MacBook that when jarred shorts/shutsdown the sytem with a loss of basic information. You could try things like an SMC reseet or PRAM reset but I seriously doubt they would have any affect. Best option would be a visit to an Apple store genius bar to have the techs run some diagnostics to see if they can identify something going wrong inside.
Hope this helps and you can find resolution...auto shutdowns of this type are not really good for the system.

HT204032 Do the mail and calendar apps need to be launched when the mac goes to sleep for them to receive new messages in power nap?

I was just trying to figure out if the Mail and Calendar apps need to be launched and running before the mac goes to sleep for them to recieve new messages during power nap.

You must open Mail and Calendar

How Do You Know When The Zen Touch Is Done Chargi

I searched through the forums and couldn't find anything on this topic.
I want to make sure that I don't overcharge my player, while still filling it to its enormous capacity. How will I know when it's done charging?

On my touch there is a little icon in the upper left corner of the screen showing my battery symbol with a power volt thing over it to show it is charging. This changes back and forth until the charging is done, then there is nothing on the screen at all.
-mrspike

Please rework the ZEN SDHC functionality with a firmware and software upda

ZEN owners would be very appreciati've if you guys over there at creative would rework the ZEN's SDHC functionality. It would be nice if the SDHC media was displayed in the same gorgeous user interface that the internal memory boasts. One way to accomplish this would be to integrate the SDHC media into the main library. But that would probably require a lot of coding i suppose. Another possibility would be if the SDHC cards file structure and interface to the player was formatted just like its internal counterpart. that way you could access the SDHC media using the same user interface as the internals, and it probably wouldn't be so much work to implement through firmware and software updates.
just some thoughts,
dave

I'm almost convinced they won't do it, they would have already told us that they are working on this. Instead of that Creative says nothing.
Some of us think that they do not integrade the SD crad in Zen library, because they will loose money. They believe that if Creative does that, then nobody will buy the 6 or 32 Gb versions, because everybody will buy the chepaer one and pout a high capacity card in it, which will be cheaper.
I do not believe this is correct. Everybody buys somethnig based on his needs. The biggest card available right know I thnik is 6Gb. My music is,let's say, 25GB. I need a 6Gb card plus 9GB of internal memory. The 8GB version won't do for me, so I have to buy the 6Gb version. Creative doesn't loose money. I really can't understand why they don't do it.
I'm fed up waiting for creative to do something about it.Message Edited by Voodooman on 2-6-200704:7 AM

What cause the ZEN Touch 2 to freeze?

Hello,
I've (finally) received my ZEN Touch 2 with GPS two days ago, and it truly is a fantastic MP3 Player. But guess what? Today, for the first time, it really did froze, using the N64oid emulator. When the ZEN is lagging, I'm simply waiting, and it work like a charm a few seconds later. But now, it was completely frozen. Touch Screen, Power button... Tried connecting to computer, no reaction.
So in a bad mood, I tried reseting the unit, which I'm obviously not suposed to do often, I had a hard time. First, the reset hole is way too tiny!? Even with a paper clip or a pencil mine, this is ridiculously hard!? First, I even used the wrong hole, I though this was the reset hole, so yeah, the paper clip got inside the ZEN... Truly awesome. After all, I managed to remove it.
And then, seemed like I got it, ZEN resetted, when I thought it was completely screwed, only two days after I received it!
It seems to work correctly, now. Needless to saw I deleted the data, application and ROMs of N64oid, the right way (Along with PSXoid, which I haven't tested, but is probably similar.). When I first tried Super Mario 64, it was playable, at an OK speed. But today, I tried others ROMs, like Donkey Kong 64, or Tony Hawks Pro Skater, without a doubt, that was asking too much from the ZEN, since I couldn't pass the main menu.
So now I really hope my ZEN will last,?Creative. I'm in Quebec, got it from California. Needed to ship it to Plattsburgh by Amazon.com, and to be fowarded to my house, since you unfortunately do not ship to Canada.
I still have a one year warrantee, but undestand me, I?absolutely wouldn't want to ship it to Creative?in?the US, then get it shipped back to Plattsburgh, and then to my home. That'll cost me hell (Again)!
Alright,?I'll?now like to know what cause the ZEN Touch 2 to freeze? In my case, that was the emulator that was too advanced for the ZEN (And since it doesn't support multi-touch, it's hardly playable without a USB keyboard or gamepad (Possible?), or Wiimote). ?I don't have applications running?in the backgroung, only one at a time.
How can I avoid my ZEN to freeze again?
Oh yes, one more question. Why when I start some applications, it instantly shut ("The application [...] (process com [...] has stopped unexpectedly. Please try again.") ? How can I fix this?
Thanks for the reply.

)?Thanks for the reply.
I unistalled many 3rd Party APPs (Only /3 were booting, anyways), and I can already see a huge difference with the fluidity of the menu. It's also turning on faster.
I already uninstalled N64oid, but kept the others 2D emulators, never had a problem with them, they run without lagging.
What's odd, however, I downloaded Firefox from ZiiO Space, ran it, and the ZEN went pretty much crazy; black screen, I tried to get back to the menu, pressing buttons and all that, and then the ZEN vibrated like hell, perhaps because I pressed the buttons a lot of time. I finally made it, without resetting, but that was freaking scary. Oo
Uninstalled Firefox. I find it strange that I downloaded it from ZiiO Space, and that it doesn't work like normal.
I'll try to be more careful while downloading APPs, if I can.
I appreciate the reply.
GameX

My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is off, I no longer receive when my phone is turned on. Is there something in Settings that needs to be changed? I never had this problem before the updat

My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is turned off, they no longer appear when I turn the phone on. Is there something in Settings that needs to be changed?

MetsFanGirl,
Thanks for verifying. Are you having issues receiving both iMessages and standard text messages when they are sent when the phone is turned off? Try this and test... http://vz.to/1qjiOs7
LindseyT_VZW
Follow us on Twitter @VZWSupport

A way how to fix the Zen Micro head phone jack prob

Hi! I am one of the many people that purchased a Zen Micro MP3 player, I loved it until around 6 months of use, an audio shorting problem with the head phone jack, started to repeat it's self every time, that I would plug my head phone's into the Zen Micro head phone jack. After awhile, I was tired of this problem, so I just decided to never use it again, unless I could find out if the maker of the Zen Micro had a repair service. I noticed that some people had their Micro's replaced a few times under the warranty that is included with the player. I also noticed that some one created a way to fix this problem, but I wanted to see if I could find an easier way to fix the problem. Well I did end up finding an easier way to fix the problem, this is what I did.
Absolutely in all means I can't be held responsible / reliable for any unforseen thing / things, that you may or could, do to the Zen Micro, by following the instructions, which I provided. By trying what I did by following the instructions, which I provided you; you accept all responsibility to any thing / things, that may or could happen to the Zen Micro.
The Instructions:
I took a stapler pressed it down to get a used staple then I carefully inserted it in the outer part of the plastic head phone jack ring. Then I pressed the rest of the staple flat against the Zen micro. And Now I get great sound, it is at least better than, the way it was before I inserted the staple. I would suggest to always remove the staple. When you connect the Zen Micro to a computer, charging device, or any other device other than a pair of head phones. You understand that if you leave the staple inserted in the Zen Micro and don't remove it. While you have it connected to a computer, charging device, or any other device, or devices, even a pair of head phones, and some thing happens, you can't hold me responsible.
If you would like to see a photo of how it looks please reply to this message and just include your email address please. I will send it to you as soon as possible. The photo has 4 photos sized down to perfectly fit on one photo, so you can get a good idea of what it should look like.
Message Edited by theZenDude07 on 02-28-200707:45 PM

Thank you for the information, can I please have the photos so I dont destroy it entirely !. Take care,?Simon?(Dublin, Ireland)

Anyone like to share their favorite custom EQ numbers for the Zen XT

i was wondering what was a good EQ setting in the Zen XTRA, in the Custom Eaqualizer, could someone share their favorite settings? Like listing the numbers for each of the bands? thanks =) Jordan

I would like to ressurect this topic since I was going to post a simular topic and question.
I've learned that the output of the EQ settings depend on the volume level type of earphones you use with them. The Zen Xtra seems to have its own default EQ when the EAX is not enabled. I was wondering what were those settings? Because if you enable the EAX and set the EQ to 0000 the sound is different from just having the EAX turned off. It seems the Zen Xtra is pre EQed for its included Ear Buds I guess. And while it might sound ok, It leaves more high end earphones sounds really muddy.
I 'm current using the Zen Xtra with the Weston UM2 earphones, and I'm experimenting with the EQ settings. Because of the low and high details the UM2s are capible of capturing, I have to adjust the EQ setting accordingly. I currently have the EQ at -3 -7 2 2 and the volume level at least has to be at the mid point around 4 or 5.
Does anyone else use the UM2s with the Zen Xtra? If so what are your EQ settings?

Reinstall Zen Server - what do I need to remove?

In trying to add more space to /opt, it became corrupt and all the data was written to the lost+found. There is about 5 GB of data in there and I'm not sure how to restore it and it would probably take forever. I'm hoping I can just reinstall Zen. The server is 64 Bit SLES 10.4 and we are on ZCM 10.3.3. I'm downloading the 10.3 media and I'm hoping I can successfully re-install. Is there anything else I need to manually remove? Do I need to do anything with the server object in Zenworks Control Center? This is not the primary server - its the 2nd primary. Darn reporting server install!!!
Anyone have any suggestions?
Melissa

The SQL DB is backed up so hopefully no worries there. Everything in ZCM seems intact and workstations are still contacting the Primary. This server is the 2nd primary.
Thanks!
Melissa
Originally Posted by AndersG
Helgeson,
> The DB is on a separate SQL server. Do I need backups of that stuff in
> the first Primary server is up and running?
You always need backups of your database :)
Anyway, the server that is borked. Is it the first primary?
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Is the Zen Touch 2 compatible with micro SDHC?

Hi,
The specifications page on the creative website showed that the Zen Touch 2 was compatible with micro SD cards, but now I'm wondering if it's compatible with the micro SDHC?
In advance thanks,
TheKingpin?

Hi.
I know this was posted some time ago... But I thought I would add the page where Creative tells us which micro sdhc cards (and card class) they would like us to use:
http://support.creative.com/kb/ShowA...s.creative.com

Zen Microphoto 8Gb problem. NEED HE

Okay....so last night i took a bunch of pictures and put them on my zen....i put them onto the removable disk part of the zen, instead of putting them where i could see them....i didnt drop my zen, and i've only had it for a week. it still looks like brand new, hasnt been dropped, hasnt been shaken, ANYTHING. today, i went to put the pictures from the removable disk onto my computer, when it stopped working. i dont know why, it just did. it froze, so i took out the battery to restart it....now when it starts up, it wont get off the Creative logo. at all. it brings me into that emergency menu thing, and i did a disk cleanup, then rebooted it. it still doesnt work at all. SOMEONE PLEASE HELP! I NEED those pictures and stuff and i have bunch of other stuff on the removable disk part that i really need. any help would be GREATLY appreciated! Thank you all!

It sounds like a hard dri've failure, but if you're sure that the device haven't suffered any sort of physical shocks it sounds strange. Try to format it (though you'll lose the pictures) and if it doesn't solve the problem, contact Creative or your retailer.

ZEN 4 GB + SDHC APACER 16 GB (needed to be inserted when the ZEN is turned on)

Similar Messages

Maybe you are looking for