ZENworks 6.5 SP1 - User Policy Package problems
I have ZENworks 6.5 SP1. I am trying to apply user policy packages to
control the desktop. We are using Windows XP and from what I can tell,
everything is setup correct, but it doesn't apply at the desktop. We do not
have any AD in our system.
This is the first time we have tried to do this.
Any ideas would be apprecitated.
Rhonda Richardson wrote:
> Jared Jennings wrote:
>> rrichardson37,
>>
>>> I don't want the policies to apply to
>>> workstaion because when I (admin) login to the workstation, I want to
>>> have 'Admin' policies not 'User' policies.
>>
>> Ok no problem.
>> Is this with groupPolicies?
>> You are installing the zfdagent.msi correct?
>>
>
> Yes, this is with group policies. I haven't worked on the W2K side yet,
> I am just starting with WXP. the ZEN agents are supposed to be
> installed, I'll have to double check (I didn't build the test network).
> I'll double check and report back.
I have double checked, yes, the 6.5 Agents are installed on the box. As
a little additional information, just to check, I added a Windows
Desktop Preferences setting to the same policy and those settings are
getting to the PC with no problem.
Also, today, when I go in and try to edit the group policy, I get an
error "The Group Policy that you are attempting to edit is currently
being edited by another user. Please try again later."
I deleted the policy today (after I got the error) and tried to
recreate, just to see if I missed a step. I get this same error when I
try to edit the group policy. I restarted all workstation on my test
network, including the management station I am building the policy from.
Similar Messages
-
Using Windows Group Policies in User policy package
I've been using the gp under User Config > Windows Settings > Internet Explorer Maintenance > Connection > Proxy Settings in the User policy Package for a while now to prevent students from getting to https sites.
There are some sites though that we had to the Exception list which has worked fine until I added a new one which is: https://secure.ontariocolleges.ca/sso/auth
When this one is added it seems the gp doesn't work at all, ie students can go to any https site they want, when I remove this exception they're blocked again.
Someone else told me there was a character limit to the exception list so I tried removing all other exceptions except the one above and it still doesn't work.
I am unable to find any other info on this. Does anyone have any ideas?
Thanks.Thanks for answering your own question :>
I'm sure the answer will help others.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"jdwall" <[email protected]> wrote in message
news:[email protected]..
>
> I think I found the problem, I replaced
> https://secure.ontariocolleges.ca/sso/auth with
> https://*.ontariocolleges.ca and that resolved it.
>
>
>
>
> jdwall;1693410 Wrote:
>> I've been using the gp under User Config > Windows Settings > Internet
>> Explorer Maintenance > Connection > Proxy Settings in the User policy
>> Package for a while now to prevent students from getting to https sites.
>>
>>
>> There are some sites though that we had to the Exception list which has
>> worked fine until I added a new one which is:
>> https://secure.ontariocolleges.ca/sso/auth
>>
>> When this one is added it seems the gp doesn't work at all, ie students
>> can go to any https site they want, when I remove this exception they're
>> blocked again.
>>
>> Someone else told me there was a character limit to the exception list
>> so I tried removing all other exceptions except the one above and it
>> still doesn't work.
>>
>> I am unable to find any other info on this. Does anyone have any
>> ideas?
>>
>> Thanks.
>
>
> --
> jdwall
> ------------------------------------------------------------------------
> jdwall's Profile: http://forums.novell.com/member.php?userid=2475
> View this thread: http://forums.novell.com/showthread.php?t=353133
> -
Java User-defined packages problem!
Hi everyone,
I am new to java programming.I am trying to do a small program to see how the user-defined pckages work.I wrote 2 small programs one is Balance.java and TestBalance.java.
The code for Balance.java is as follows..
package MyPack;
public class Balance{
String name;
double bal;
public Balance(String n, double b){
name = n;
bal = b;
public void show(){
if(bal < 0)
System.out.print("--->");
System.out.println(name + ": $" + bal);
}The code for TestBalance.java is as follows..
import MyPack.*;
class TestBalance{
public static void main(String args[]){
Balance test = new Balance("Leela",99.88);
test.show();
}These r both in the same directory....I am able to compile Balance.java...but when I try to compile TestBalance.java I am getting the following errors
TestBalance.java:1: package MyPack does not exist
import MyPack.Balance;
^
TestBalance.java:5: cannot resolve symbol
symbol : class Balance
location: class TestBalance
Balance test = new Balance("Leela",99.88);
^
TestBalance.java:5: cannot resolve symbol
symbol : class Balance
location: class TestBalance
Balance test = new Balance("Leela",99.88);
^
3 errorsI am using j2se1.4 version ....my path is set to bin folder..
Could someone plz tell me what is the mistake...it would be very helpful for me if someone could plz tell me what the problem is...
Thanx in advance.99% going to work
i have noticed some of the few thing
trying to help
u told that ur both the classes r in same directory right
ok
now ur first class has this as first line
package mypack;//till here its ok only "mypack" should be small case
now put this same line also in the other class as firat line
and remove that import statement since both r in same package so no
need to import it ok
here's the code
package mypack;class TestBalance{ public static void main(String args[]){ Balance test = new Balance("Leela",99.88); test.show(); } }
now compile it this way
create a folder call mypack and put this both the classes in that folder
say its c:\mypack\ur classes
now in dos prompt
type this
set classpath=%classpath%;C:\mypack \
now u compile ur first class and then second
Surely this going to work if not tell me the errors u r getting -
Importing User defined package problem.
Hi All,
I have made to package, "forum" and "utility". DBhandler java file is in "utility" package and Forumhandler is in "forum" package.
I want to import DBhandler classes from "utility" package into "forum" package for this i write
"import utility.*" in forum package's Forumhandler java file. But it is giving error.
The error is -
forum/ForumHandler.java:13: cannot resolve symbol
symbol : class DBHandler
location: class forum.ForumHandler
DBHandler dbhand = new DBHandler();forum/ForumHandler.java:13: cannot resolve symbol
symbol : class DBHandler
location: class forum.ForumHandler
DBHandler dbhand = new DBHandler();
Do you have your visibility right?
The class DBHandler should be declared public.
P.s. it's a bad practice to use wildcards for imports if you just want to import a few classes, use
import my.company.product.utility.DBHandler;instead (or something similar). -
ZfD3 on W2K: User Policy Printers Causing Problems
I use ZfD3 with W2K Pro workstations on a NetWare 5.1 network. If I use a
ZEN user policy package to roll out queue-based printers, I can't add
printers that aren't part of this policy (i.e., local printers) without
causing the workstation to not be able to print at all - to any printer.
All the printers download and work fine provided I don't add any that
aren't part of the user policy package. Any help would be greatly
appreciated; please reply to my e-mail [email protected] Have
already tried various Novell client versions, which did not solve the
problem. Thanks.Catcalls99,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Rights to associate users to Policy Package
If I want to give a user the rights to associate other users to a Policy
Package what exact rights to I need to grant them?Cleik,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
ZENworks 6.5 SP1b And Group Policy Editor Problems
I just installed ZENworks 6.5 SP1b on a brand new test server that I am
running. I have no users or strain on the server. After I installed the
service pack it started take about 20 to open the Group Policy Editor for
a user policy and about a minute 20 to close it. I was using it before the
upgrade and it only took like 10 seconds to close before. What's up? Can
any one help?Yeah Sorry I clicked the wrong one
> I presume someone will help in the Desktops forum, since this is for
> server management...
>
> --
>
> Shaun Pond
>
> -
Zenworks 4.1 user policy fails on xp sp2 machines
Hi,
We are using Zenworks4.1, agent 6. Our user policy used to work when we
have Windows '98 machines. However, they stop working when our machines
now are WinXp SP2.
Can anyone shed some light on this?
Thanks in advance.
jslcOn Sat, 17 Feb 2007 12:23:54 GMT, [email protected] wrote:
> We are using Zenworks4.1, agent 6. Our user policy used to work when we
> have Windows '98 machines. However, they stop working when our machines
> now are WinXp SP2.
which user policy?
where did you configure the user policy? under which tab?
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
User policy becomes uneffected while in use.
I'm running a fresh install of zenworks 11.2 on SELS 11 64 bit.
A bit of back ground. I have a machine policy in place that pretty much makes the machine unusable. Then I have a user policy that reverses much of the machine policy. I've been seeing many of my Windows 7 SP1 64 bit machines look like the user policy looses its effectiveness and reverts back to the machine policy. This seems to be random. Doesn't happen to everyone. Happens to some people frequently. I've looked over the log and haven't found to much in common. I did see this but on my test machines that did it this message didn't come up when the policy went away. on 1 that i knew the time i saw no messages in the log at all. early i did see this message though
[ WARN] [08/30/2012 07:50:20.542] [1984] [ZenworksWindowsService] [34] [] [ZESMEnterprisePolicySettings] [ZESMPolicyHandler.ZESMCORE_COMM_FAILED] [Unable to communicate with ZESService. Please make sure that ZES Service is running.] [Status returned Non-Zero value from ZESM Core function : "StartZESMPolicies[[Zone]]".] []
[DEBUG] [08/30/2012 07:50:20.542] [1984] [ZenworksWindowsService] [34] [] [ZESMEnterprisePolicySettings] [] [Applcaiton Exception occured while Communicating Enterprise Policies to ZESZID : Error in communcating with ZESZID : START function returned : 5] [] []
i've also been seeing this warning
[DEBUG] [08/30/2012 07:58:36.473] [748] [ZenWindowsDaemon] [13] [] [DeviceGuid] [] [Irrecoverable error!!! Error in creating Device Session.] [] []
Any insight or suggestions would be much appreciated.Dist88,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Skipping request for user policy assignments due to agent configuration for authority
Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140422164904.539000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 604;
CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
DateTime = "20140422164946.336000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 3216;
CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140804215639.612000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 2212;
CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804215651.440000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 3348;
CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN: smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.423000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.485000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.563000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.657000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.048000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2508;
CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.110000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2188;
CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.188000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-JanHello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS : 1
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION : {}
__SERVER : DEMO-CAPTURE
__NAMESPACE : ROOT\ccm
__PATH :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue :
PSComputerName : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan -
How to use user-defined packages in JAX-RPC web service
I am trying to use Object of my class located in my package in jax-rpc webservice,the code is
package supercomputer;
import Hello.*;
public class SuperImpl implements SuperIF
public String sendParam(String data)
Temp ob=new Temp();
int i=ob.get1(10000);
return data+"returned by supercomputer";
Temp is located in Hello package,I have jar the Hello package as Hello.jar and has set its classpath in targets.xml of Ant tool.
The code compiles well and service is deployed successfully,but when i try to call the service from the client its gives me following error.
[echo] Running the supercomputer.SuperClient program....
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:357)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:228)
[java] at supercomputer.SuperIF_Stub.sendParam(SuperIF_Stub.java:60)
[java] at supercomputer.SuperClient.main(Unknown Source)
I dont know if it deploys why it gives error on client side.
Please tell how to use user-defined packages and class in jax-rpc service code ,i am not talking about passing user-defined parameters i am just talking about making objects of user defined classes in jax-rpc service.I think there is some problem in classpath.
Please guide me in doing that.
Thanks,
FarrukhFarrukh,
I don't know if your error is about a missing class from your custom package, ... what track did you followed to say that?
To use your package in the implementation of you web service, you should only follow the rules of making a web application: put your package jar in your \lib directory inside WEB-INF/ or your package classes unjared in classes (also in WEB-INF/).
As I already said, I have doubts that your error should be originated from a missing class from your package, but:
-try to see the logs (errors?) when you deploy your web service that could give a hint about the problem.
-try to see if you can access your endpoint through your browser to see if there is a online status
-display your config/WSDL file, and the steps you did to build your web service.
regards,
Pedro Salazar. -
Processing of Group Policy failed - User Policy - Windows 7
OP:
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/191f1ee1-a551-446b-9808-ff66a952bb25
When running a gpupdate I get the following message:
Updating Policy...
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows could not authenticate to the Act
ive Directory service on a domain controller. (LDAP Bind function call failed).
Look in the details tab for error code and description.
Computer Policy update has completed successfully.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.
This only happens on one computer under a certain account; other accounts work fine and the problem account works fine on other computers. Therefore the problem is located on the Windows 7 computer.
I have tracked it down to an LDAP error code 49.
I tried the MS sollution (http://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx) but the credentials are sound.
I can also connect to the DC with LDP.exe fine.
Here are the diagnostic read outs (GPResult was too long to post):
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 2/29/2012 1:56:09 PM
Event ID: 1006
Task Category: None
Level: Error
Keywords:
User: Domain\UserAccount
Computer: Win7-ComputerA.FQDomain
Description:
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller. (LDAP Bind function call failed). Look in the details tab for error code and description.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1006</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2012-02-29T19:56:09.732842600Z" />
<EventRecordID>32458</EventRecordID>
<Correlation ActivityID="{CECE6DDC-E7CC-4563-8109-E62382F645D4}" />
<Execution ProcessID="984" ThreadID="3688" />
<Channel>System</Channel>
<Computer>Win7-ComputerA.FQDomain</Computer>
<Security UserID="S-1-5-21-416373151-1271962822-2142307910-40105" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">5012</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1326</Data>
<Data Name="ErrorCode">49</Data>
<Data Name="ErrorDescription">Invalid Credentials</Data>
<Data Name="DCName">
</Data>
</EventData>
</Event>
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN7-ComputerA
Primary Dns Suffix . . . . . . . : FQDomain
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : FQDomain
ParentDomain
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : FQDomain
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-5F-CF-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 216.71.244.28(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, February 29, 2012 12:38:25 PM
Lease Expires . . . . . . . . . . : Thursday, March 01, 2012 12:38:24 PM
Default Gateway . . . . . . . . . : 216.71.244.1
DHCP Server . . . . . . . . . . . : 216.71.244.2
DNS Servers . . . . . . . . . . . : 216.71.244.2
216.71.240.120
216.71.240.132
Primary WINS Server . . . . . . . : 216.71.244.2
Secondary WINS Server . . . . . . : 216.71.240.130
216.71.240.122
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN
Physical Address. . . . . . . . . : 8C-A9-82-B0-67-E8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesHi,
It sound like port blocking issue, Seems your client system connecting 216.71.240.x DNS Servers as a logon server and which seems on different subnet
as per subnet mask, So there must be a router or firewall in between and so it might be Active directory ports are being blocked.
So first for testing purpose just remove other
216.71.240.x DNS
servers from TCP/IP configuration and clear dns cache
ipconfig/flushdns
and restart the system. check if it works.
or run this command on DC
dcdiag /test:dns
and share the error report.
Cheers!
Sanjay -
im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.
Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows -
I setting up an WLC with the client using EAP-TLS (machine authentication only). We are using ACS 3.2 which is part of AD. The problem is that the ACS is being used to authorize users for Internet Access also.
So if I enable the Unknown User Policy to AD for EAP-TLS machine authentication, this will break what is being done for Internet Access.
Any ideas that don't include entering every machine and user name in the local database? I was wondering if I could setup a wildcard user of host/* that points to AD.
Is there a way to make this work without configuring the Unknown user policy to point to AD?
Thank you!Log onto the ACS server itself as the local administrator.
Browse to the Bin directory in the ACS program directory.
Run the program there called CSSupport.
Select "Run Wizard" and click Next.
Check all the boxes and create the file for last 3 days and clickNext.
Again click Next.
Select "Set Diagnostic Log Verbosity to Maximum." and click Next.
Click Next, then click Finish.
In an environment where there is more than one global catalog server for the domain, ACS will not search for the secondary" catalog server if the "primary" goes down.
Condition: ACS is installed on a domain member server.
Workaround: Re-start csauth.exe.Let me know if restarting CSAuth makes any difference -
Help!! package problem in jsp
hello,
i have problem that all class is packaged in test folder. and the test folder is located inside the C:\Tomcat_5.0\webapps\BB2004\WEB-INF\class.
the problem is two class is stored in the test. and two class include (package test);
one class is dbConnect.java (it is used to connect database.)
next class is user.java.
during compile the two class, dbConnect can compile, but user.java cannot compile.
the following is error:
C:\xyz>javac user.java
user.java:8: cannot resolve symbol
symbol : class dbConnect
location: class xyz.user
dbConnect dbconn;
^
user.java:16: cannot resolve symbol
symbol : class dbConnect
location: class xyz.user
dbconn=new dbConnect();
please help to solve that.....(dbConnect.java)
package test;
import java.sql.*;
public class dbConnect {
String sConnStr = "jdbc:oracle:thin:system/[email protected]:1521:goh";
Connection conn = null ;
ResultSet rs = null;
public String sql;
public dbConnect() {
try {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
catch (SQLException e) {
System.err.println("dbConnect():"+e.getMessage());
e.printStackTrace();
public ResultSet executeQuery(String sql)
rs = null ;
try {
conn= DriverManager.getConnection(sConnStr);
Statement stmt = conn.createStatement();
rs = stmt.executeQuery(sql);
catch(SQLException ex)
System.err.println("aq.executeQuery: " + ex.getMessage());
System.err.println("aq.executeQuerystrSQL:"+sql);
return rs ;
public void executeUpdate(String sql)
try {
conn = DriverManager.getConnection(sConnStr);
Statement stmt= conn.createStatement();
stmt.executeQuery(sql);
stmt.close();
conn.close();
catch(SQLException ex)
System.err.println("aq.executeUpdate: " + ex.getMessage()) ;
System.err.println("aq.executeUpdatestrSQL:"+sql);
user.java
package test;
import java.io.PrintStream;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Date;
public class user
dbConnect dbconn;
ResultSet rs;
String strSQL,userID,userName,userPwd,userEmail,userWebpage,userHobby,userCountry,userSex,userTypeID,webpageName;
int postedNo,i;
Date userBirthday, registerDate;
public user()
dbconn=new dbConnect();
rs=null;
userID="M0";
userName=null;
userPwd=null;
userEmail=null;
userWebpage=null;
webpageName=null;
userSex=null;
userCountry=null;
userBirthday=new Date();
registerDate=new Date();
userHobby=null;
postedNo=0;
userTypeID="member";
public void changeUserTypeID(String name, String type)
strSQL="update user set userTypeID='"+type+"' where userName='"+name+"'";
dbconn.executeUpdate(strSQL);
public void changeUserPwd(String name, String pwd)
strSQL="update user set userPwd='"+pwd+"' where userName='"+name+"'";
dbconn.executeUpdate(strSQL);
public boolean checkUserPwd(String name, String pwd)
rs=null;
boolean isUser=false;
strSQL="select * from user where userName='"+name+"' and userpwd='"+pwd+"'";
try
rs=dbconn.executeQuery(strSQL);
if(rs.next())
isUser=true;
getUserInfo(name);
rs.close();
catch(SQLException sqlexception)
System.err.println("aq.executeQuery:"+sqlexception.getMessage());
System.err.println("checkuserpwd.STRSQL:"+strSQL);
return isUser;
public int countUser()
strSQL="Select count(*) as aa from user";
i=0;
try
rs=dbconn.executeQuery(strSQL);
if(rs.next())
i=rs.getInt("aa");
rs.close();
catch(SQLException sqlexception)
System.err.println("aq.executeQuery:"+sqlexception.getMessage());
System.err.println("countuser.STRSQL:"+strSQL);
return i;
public void delUser(String name)
strSQL="delete from user where userName='"+name+"'";
dbconn.executeUpdate(strSQL);
public Date getUserBirthday()
{ return userBirthday; }
public Date getRegisterDate()
{ return registerDate; }
public String getUserTypeID()
{ return userTypeID; }
public String getUserName()
{ return userName; }
public String getUserPwd()
{ return userPwd; }
public String getUserSex()
{ return userSex; }
public String getUserCountry()
{ return userCountry; }
public String getwebpageName()
{ return webpageName; }
public String getUserWebpage()
{ return userWebpage; }
public String getUserEmail()
{ return userEmail; }
public int getPostedNo()
{ return postedNo; }
public String getUserHobby()
{ return userHobby; }
public String getUserID()
{ return userID; }
public boolean getUserInfo(String name)
rs=null;
boolean isUser=false;
strSQL="select * from user where userName='"+name+"'";
try
rs=dbconn.executeQuery(strSQL);
if(rs.next())
isUser=true;
userID=rs.getString("userID");
userName=rs.getString("userName");
userPwd=rs.getString("userPwd");
userSex=rs.getString("userSex");
userWebpage=rs.getString("userWebpage");
userCountry=rs.getString("userCountry");
userBirthday=rs.getDate("userBirthday");
registerDate=rs.getDate("registerDate");
webpageName=rs.getString("webpageName");
postedNo=Integer.parseInt(rs.getString("postedNo"));
userHobby=rs.getString("userHobby");
userEmail=rs.getString("userEmail");
userTypeID=rs.getString("userTypeID");
rs.close();
catch(SQLException sqlexception)
System.err.println("aq.executeQuery:"+sqlexception.getMessage());
System.err.println("aq.STRSQL:"+strSQL);
return isUser;
public ResultSet listUser(int choice)
rs=null;
switch(choice)
case 1:
strSQL="select * from user order by userID desc";
break;
case 2:
strSQL="select * from user order by userName desc";
break;
case 3:
strSQL="select * from user order by userTypeID desc";
break;
default:
strSQL="select * from user order by userID desc";
break;
rs=dbconn.executeQuery(strSQL);
return rs;
public void registryNewUser()
{/add new member to the tableTo_Date('"+updateValue[i]+"','"+ addDate[i]+"')"
strSQL="insert into user(userID, userName,userPwd, userSex, userWebpage, webpageName, userEmail, userCountry, userHobby, postedNo, userTypeID, userBirthday, registerDate) values('M"+String.valueOf((countUser()+1))+"','"+userName+"','"+userPwd+"','"+userSex+"','"+userWebpage+"','"+webpageName+"','"+userEmail+"','"+userCountry+"','"+userHobby+"','0','"+userTypeID+"',To_Date('"+userBirthday+"','YYYYMMDD'), To_Date('"+registerDate+"','YYYYMMDDhh24mi'))";
dbconn.executeUpdate(strSQL);
public void setUserID(String userId)
{ userID=userId; }
public void setUserName(String name)
{ userName=name; }
public void setUserPwd(String pwd)
{ userPwd=pwd; }
public void setUserEmail(String eMail)
{ userEmail=eMail; }
public void setWebpageName(String webpagename)
{ webpageName=webpagename; }
public void setUserWebpage(String userwebpage)
{ userWebpage=userwebpage; }
public void setUserSex(String usersex)
{ userSex=usersex; }
public void setUserCountry(String usercountry)
{ userCountry=usercountry; }
public void setUserHobby(String hobby)
{ userHobby=hobby; }
public void setPostedNo(int postedno)
{ postedNo=postedno; }
public void setUserBirthday(Date birth)
{ userBirthday=birth; }
public void setRegisterDate(Date register)
{ registerDate=register; }
public void setUserTypeID(String usertypeid)
{ userTypeID=usertypeid; }
public void updateUserInfo(String userid)
{//update user info to the table when something member info change
strSQL="update user set userEmail='"+userEmail+"',userPwd='"+userPwd+"',userName='"+userName+"',userHobby='"+userHobby+"',userWebpage='"+userWebpage+"',userSex='"+userSex+"',webpageName='"+webpageName+"',userCountry='"+userCountry+"',userBirthday=To_Date('"+userBirthday+"','YYYYMMDD'),registerDate=To_Date('"+registerDate+"','YYYYMMDDhh24mi') where userName='"+userid+"'";
dbconn.executeUpdate(strSQL);
thank you to solve.
Maybe you are looking for
-
Bridge or Photoshop Elements?
Greetings, I just bought Dreamweaver CS4. I've already been using Photoshop Elements 6 to manage my photos, so is there any benefit to using Bridge, in addition to Photoshop Elements? Thanks, Shane.
-
I can't face time frame my iPad to iMac
Can't get face time to work even though both ,my i pad and I Mac have the app. Please help
-
Strange Behaviour of Abap Report
In my report , I am displaying the page number in the top of the report in the format page 1 of n . The code i am using is ... DATA l_page_count(5) TYPE c. FORM page_display . WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED. DO sy-pagno TIMES.
-
Hi Experts, I have a requirement in which I am sending a mail through actions.In the action I have mentioned the smartform.The email sent should have voting buttons such as 'YES' and 'NO'. If the reciever replies back to the email and selects 'YES' t
-
Outlook-Daten (Outlook 2003) auf IPod laden
Hallo, ich möchte meine Outlook-daten, Kalender sowie Kontakte auf meinen IPod laden. Die bisherigen Beschreibungen im Internet haben zu keinem Erfolg geführt. Wer kann mir da Informationen geben.