ZenWorks Oracle database problem, please help!

Hi,
we have problem with Zenworks 6.5sp2 database. This database is on Oracle
10g server (SUSE Linux Enterprise Server 9). We prepared the clean
database. When I start the inventory servise, following error are in the
migration log file:
Starting the AlterProcedure Log at 2006-06-20 13:09:09.755
Unzipping the file migrate.zip
About add t$Class table,Supportpack,Productedition,File
Supportpack t$ClassID:ORA-00001: unique constraint
(MW_DBA.I$CLASS$CLASSNAME) violated
ProductEdition t$ClassID:ORA-00001: unique constraint
(MW_DBA.I$CLASS$CLASSNAME) violated
file t$ClassID:ORA-00001: unique constraint (MW_DBA.I$CLASS$CLASSNAME)
violated
and following errors in the end of log file:
ORA-01950: no privileges on tablespace 'CIM9'
managewise->create index i$User$storer on managewise.t$user(all_columns)
tablespace cim9 pctfree 0 is being executed
Could not do the operation. details:ORA-01950: no privileges on
tablespace 'CIM9'
ErrorCode:1950
Totaltime taken for Schema Migration : 5616
Migration Exception Message->ORA-01950: no privileges on tablespace 'CIM9'
, SQLState->42000, ErrorCode->1950
Any tip???
Josef

We set up a new oragle 10 g1 database, and followed the instructions
from Novell's documentation about setting up teh oracle database. We
configured and ran the inventory service on Netware, and on SuSE linux.
In both case, we got this error:
com.novell.zenworks.desktop.inventory.storer.MainT hread.run(MainThread.java:976)
[6/16/06 13:20:54.292] ZENInv - Storer: MainThread-1 position:
com.novell.zenworks.desktop.inventory.storer.Datab aseException:
ORA-00001: unique constraint (MW_DBA.SYS_C004544) violated
Rest of hte log file is here:
at
com.novell.zenworks.desktop.inventory.storer.Datab aseOperator.executeUpdate(DatabaseOperator.java:25 44)
at
com.novell.zenworks.desktop.inventory.storer.Insta lledFile.loadFromTemp(InstalledFile.java:215)
at
com.novell.zenworks.desktop.inventory.storer.Parse .addNullsDuringFULLScan(Parse.java:3609)
at
com.novell.zenworks.desktop.inventory.storer.Parse .parse(Parse.java:4119)
at
com.novell.zenworks.desktop.inventory.storer.MainT hread.run(MainThread.java:976)
[6/16/06 13:20:54.293] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.305] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.319] ZENInv - Status Reporting: Adding record 0 for
DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.388] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.388] ZENInv - Storer: MainThread-2 position:
[6/16/06 13:20:54.389] ZENInv - Storer: MainThread-2 position(determined
that connection is closed):
[6/16/06 13:20:54.500] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.512] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.526] ZENInv - Status Reporting: Adding record 0 for
DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.588] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.588] ZENInv - Storer: Connection restored.Retrying the
str file 00B0D0DFA1B1_1150292302000_1.STR
[6/16/06 13:20:55.192] ZENInv - Storer: Loading Storer test properties file
[6/16/06 13:20:55.192] ZENInv - Storer: Storer: started storing
00B0D0DFA1B1_1150292302000_1.STR (122146 bytes)
[6/16/06 13:20:55.220] ZENInv - Storer: dn: CN=RWALKERDESKTOP.O=novell
tree: CGISTESTTREE
[6/16/06 13:20:55.220] ZENInv - Storer: tree: CGISTESTTREEwsdn:
CN=RWALKERDESKTOP.O=novelltime: 1150293040000
[6/16/06 13:20:55.220] ZENInv - Storer: Initial WS statusrecord is found
[6/16/06 13:20:55.221] ZENInv - Storer: got the status log
[6/16/06 13:20:55.259] ZENInv - Storer: [FULL]DELETING ALL PRODUCTS
[6/16/06 13:20:55.881] ZENInv - Storer: Products=108 Sw_Times = 120 108
0 0 53 50 0 0 264 108 4 1 TotalTime=561
[6/16/06 13:20:56.528] ZENInv - Storer: FileCacheHits=172 : 172
[6/16/06 13:20:56.938] ZENInv - Storer: ws deletetime : 258
[6/16/06 13:20:58.273] ZENInv - Storer: time for getting unique object: 77
[6/16/06 13:20:58.526] ZENInv - Storer: Some Database Exception
com.novell.zenworks.desktop.inventory.storer.Datab aseException:
ORA-00001: unique constraint (MW_DBA.SYS_C004544) violated

Similar Messages

Oracle Designer Problem Please help me

Sir,
1) I created a database
2) Run>cd d:\Oracle_home\repadm61\admin\@ckqa
@ckparams.txt
@ ckvalqa
@ ckcreate
3)Opened Repository Administration Utility
Log in as 'repos_manager/repos_manager@orcltest'
Installed Repository.
4) Opened Oracle 9i Designer. I am able to connect
as 'repos_manager/repos_manager@orcltest'
But I am not able to logon as any other user in same database/ any other user in different database. Why?
Please help me.
regards
Mathew

duplicate thread, see this one -> Re: Oracle Designer Problem Please help me

Oracle connection problem - please help

Hi.
On my Win2k machine I first installed Oracle Developer 6.0 in C:\ORANT.
After that I also installed Oracle in C:\ORACLE.
I always used sqlplus C:\ORACLE\BIN\SQLPLUS.EXE till now. Now I have to
use Forms builder to complete my homework. The problem is that I can't
connect to my Oracle database with Forms builder.
I try to solve my problem by comparing runs of C:\ORACLE\BIN\SQLPLUS.EXE
with C:\ORANT\BIN\SQLPLUS.EXE (from developer tools). So I execute:
- sqlplus my_user/my_pass@testconn
in each directory. In the C:\ORACLE\BIN (using sqlplus that come with
Oracle database) all works fine, while in C:\ORANT\BIN (using sqlplus
that come with development tools) I get an error:
- ORA-12705: invalid or unknown NLS parameter value specified
I try to fix the problem by editing copying connection data from
C:\ORACLE\network\ADMIN\tnsnames.ora to
C:\ORANT\NET80\ADMIN\tnsnames.ora, but this didn't help.
Can someone help me?
My tnsnames.ora:
TESTCONN.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SID = MYSID)
[i]Long postings are being truncated to ~1 kB at this time.

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

Oracle.DataAccess problem please help

I have an asp.net mvc (EF) project , I had downloaded oracle data provider with version 4.112.2.50 -32bit on my pc when moving project to windows server 2008 (I have the same version of odp-64bit) I have the below problem:
Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format.
when I toke Oracle the "Oracle.DataAccess.dll" from the server and make it with my project reference I have another error message like the above with a file "Oracle.Web"
Could not load file or assembly 'Oracle.Web' or one of its dependencies. An attempt was made to load a program with an incorrect format.
also if I get the File "Oracle.Web.dll" to my project reference from the server I have the same error with "Oracle.Web"

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

Firewall + Oracle connection problem, please help!

We've written a Java application (GUI) that resides on end user desktop. The tool uses a type 4 driver to connect to Oracle that is nested inside a firewall. The connection fails when trying to login to Oracle from the clients' computers that are not in our network; error says "Invalid protocol error!". Please advise...
Note- there are no connectivity issues with the tool when running inside the network.
Thanks,
KN

You need to open up the firewall for the selected port and probably the TCP/IP protocol on that port.
Thomas

Unable connect oracle database problem

Hi ,
I ahve installed oracle 11g on windows 7 machine.It is working fine intially after some days when ai m connecting it is giving the below error.
ora-01033 oracle initialization or shutdown in progress.
After this I ahve done the below steps and corrosponding results.
1.shutdown abort
oracle instance shutdown
2.startup nomount
oracle instance started
below some statitics like total system global area..
3.alter database mount
database altered.
4.alter database open
database altered.
after these steps also still i am getting the problem .Please help me to resolve the problem.

925197 wrote:
This time the following error came.
SQL> startup nomount;
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 3373858816 bytes
Fixed Size 2257864 bytes
Variable Size 2348813368 bytes
Database Buffers 1006632960 bytes
Redo Buffers 16154624 bytes
SQL> alter database mount;
Database altered.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-00333: redo log read error block 724 count 7470When you aborted database, may be redo is corrupted.
try : alter database recover database until cancel;
alter database open resetlogs; Regards
Mahir

Not able drop a user in database.. please help

Not able drop a user in database.. please help
SQL> drop user xxx cascade;
drop user xxx cascade
ERROR at line 1:
ORA-00600: internal error code, arguments: [16500], [kqdcru], [D], [2], [74],
[BIN$gwB1YtUSNkHgQKjAVbQi5w==$0], [], []
i tried to clear recycle bin .. it went fine as sysdba but not an user
As sys:
purge recyclebin;
Recyclebin purged.
SQL> conn xxx
Enter password:
Connected.
SQL> purge recyclebin;
purge recyclebin
ERROR at line 1:
ORA-00600: internal error code, arguments: [16500], [kqdcru], [D], [2], [74],
[BIN$gwB1YtUSNkHgQKjAVbQi5w==$0], [], []
restart of db not helping out...
thanks in advance.. help me out..

You didn't mention your Database and O/S details....
drop user xxx cascade
ERROR at line 1:
ORA-00600: internal error code, arguments: [16500], [kqdcru], [D], [2], [74],
[BIN$gwB1YtUSNkHgQKjAVbQi5w==$0], [], []
SQL> purge recyclebin;
purge recyclebin
ERROR at line 1:
ORA-00600: internal error code, arguments: [16500], [kqdcru], [D], [2], [74],
[BIN$gwB1YtUSNkHgQKjAVbQi5w==$0], [], []You should probably raise a Service Request for ORA-00600 errors, as Oracle Support needs to look at it.
Regards
Z.K.

Urgent Problem please Help(hayat)

Hello Hi,
I want to Install Form 6.0 With Oracle 8i on Server
mean not personal oracle,
if i install first oracle 8i and then form 6.0 then
they overwrite their homes and vice versa.
What method i use to control this problem.
please help me so that i install form 6.0 on oracle 8i server.
thanks
hayat

Ok, I have read the sun site and downloaded the JDK and saved it to disk in the C:\ drive.
However I still get the same error so I think I must be very stupid and I think the computer knows that.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

How to use a vector to navigate my database? please help me.. ty

how to use a vector to navigate my database? please help me.. ty

Quite unclear request�
Can you provide more details?

ZenWorks Oracle database problem, please help!

Similar Messages

Maybe you are looking for