Zero suppression doesn't work
Hi,
We are having an issue with the zero suppression.
We have done a simple query with Material and Price in Columns, and Calmonth in rows.
We want to suppress the zeros, but it is not working if we let the Material in columns (example 1).
If we change the drill down for Material, and we put in rows, the zero suppression is working fine (example 2)
EXAMPLE 1
Price
Material A123 A432 B564
Calmonth
10.2010 0 15 55
EXAMPLE 2
Calmonth Material Price
10.2010 A432 15
B564 55
The suppression is configured in query designer for rows, columns and structures.
This is happening in Analyzer and thru RSRT, but if we execute the query thru the web (portal) it works as expected.
What do you think it could be happening?
Thanks in advance, Federico
Hi Rakesh,
I already have a condition for a hide column with KF. Could it be the reason why it is not suppresing the column? Because if I see the overall resul there is a number, for other month there is money for Material A124, but the condition (that works perfect) makes the month doesn't show. Anyway if I put the material in rows the suppression works, but not in columns.
EXAMPLE 1
Price
Material A123 A432 B564
Calmonth
10.2010 0 15 55
Overall 10 25 55
EXAMPLE 2
Calmonth Material Price
10.2010 A432 15
B564 55
Regards, Federico
Similar Messages
-
Zero key doesn't work or produces //..:: or adjusts volume
I have a MacBook Air which is just over 6 months old and the zero key has stopped working properly. I have not spilt anythingon the keyboard and it is not damaged. I also plug the machine into an Apple screen and use an external keyboard which mimmicls the exact same problem. Whe I pres the zero key it either doesnt owrk at all, adjusts the volume up and down or produces symbls such as /: etc. Any ides? Driving me crazy.
Satellite C855D-S5320
Downloads here.
Have you upgraded to Windows 8.1? If so, did you do it this way?
How to Update from Windows 8 to Windows 8.1
I don't understand your situation. Can you boot to Windows? If so, you can restore the hard disk to its original out-of-the-box contents this way in Windows 8.
Settings > Change PC settings > General tab > Remove everything and reinstall Windows
And this way in Windows 8.1.
Settings > Change PC settings > Update and recovery tab > Recovery tab > Remove everything and reinstall Windows
I don't see anything about a zero key in your User's Guide.
Satellite/Satellite Pro C800/L800/S800 Series User’s Guide
-Jerry -
Financial Reporting with supporting details row suppression doesn't work
Hi,
I've a report on Planning data with a conditional suppression on Row (Advance Set-up ) and it works exactly as I want. When I activate the supporting details and run the report... the suppression does NOT WORK ANY MORE.
Can somebody help me ????
Esample of the report (I have 3 dimension in the row):
BUDGET Year
Account 1 ActivityTot WorkTot 20
Account 1 Activity1 Work1 10
Account 1 Activity1 WorkTot 10
Account 1 Activity2 Work1 10
Account 1 Activity2 WorkTot 10
Account 2 ActivityTot WorkTot 200
Account 2 Activity1 Work1 100
Account 2 Activity1 WorkTot 100
Account 2 Activity2 Work1 100
Account 2 Activity2 WorkTot 100
Account TOT ActivityTot WorkTot 220
Account TOT Activity1 Work1 110 <-- I want to suppress this
Account TOT Activity1 WorkTot 110 <-- I want to suppress this
Account TOT Activity2 Work1 110 <-- I want to suppress this
Account TOT Activity2 WorkTot 110 <-- I want to suppress this
I want to suppress in the Total Account all the rows with Activity and Work on leaf level.
Condition of suppression:
Level ACCOUNT > 0 and
( Generation ACTIVITY > 2 or Generation WORK > 2 )
Without supporting detail it works, with supporting detail not. What's wrong ?????Another BB known issue
Users may not to able to take and restore data of the BB10 devices using BlackBerry Link if these ar...
Scenario 2:
While taking a backup using BlackBerry Link the following error is displayed:
Note: This error appears if the device is activated on BES12 using Work Space onlyActivation profile.
Backup did not complete
Verify that your device is turned on and connected to BlackBerry Link, and try again. -
Problem with 7447 zero suppression
7447 zero suppression doesn't work in Mulitisim 10. Can anybody solve this problem or tell me how to realize this function?
circuit attached.
Attachments:
led decoder demo.ms10 62 KBThis is an interesting little situation. I believe you to be correct but it goes much deeper than that. When I tie RBI to ground it not only lights up all the segments, but it will not let the number selected be displayed. If I tie BI/RBO to ground it blanks the display and nothing is diplayed. I have tried everything I can think of to get the zero not to display while at the same time getting the selected number to show up. I have not been able to do this. Therefore your statement is correct that it not working properly. This will have to be one for NI to look at and see what they may have up their sleeve to get this to work correctly.
I never really noticed this as usually the zero never bothered me when doing my counting circuits. Thanks for bringing this to the forum's attention.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day -
Zero Suppression Not working in Bex Query with Formula Variable
Hi Friends,
I have a peculiar issue here. We upgraded from 3.5 to 7.0 recently. Some of our Bex queries have been behaving abnormally after this. In these queeries,
we have some key figures which use formula variables (ready for input and mandatory) in 3.5. User can enter either 1 or 0. The actual key figure is multiplied to the formula variable so, the entire column gets the actual key figure value if the user enters a value '1' and the gets the value 0 if the user enters '0' in the formula variables. Zero suppression is activated on the rows and columns and this report. This technique was used successfully to show/hide a column.
After upgrade, the same query works but, the zero suppression is not working. When the user enters a value of '0' in these formula variables, all the entries in the column for the key figure are displayed as 0 but the column is still displayed. It is like the zero suppression setting is not active at all.
I created one of those queries in Bex 7.0 to see if that works but, the issue still exits. Have anyone come across this kind of a scenario? Please get back to me if anyone has any idea on this situation.
Thanks and Regards
Subray HegdeWhich SP level are you at in BI 7? There is an OSS Note that would need to be applied if you're on lower than SP10. That note is:
[OSS Note 964756 - Formula variables with replacement from difference in BI 7.0|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=964756] -
BI7 - Zero suppression w/ more than 1 drill down/accross
Hi,
When using structures & drill downs/across, the zero suppression does not work as expected:
Eg. Assets Liabilities & Income statement are 3 nodes of a Group account structure, G/L account is drilled down while profit center is drilled across.
___________________________________________Profit Center 1__Profit Center 2____Total
A -Assets (Group account structure node)
GL Account A1___________________________________10_____________15__________25
GL Account A2 5 5 10
GL Account L1 0 0 0
GL Account L2 0 0 0
GL Account I3 0 0 0
GL Account I4 0 0 0
L -Liabilities node (Group account structure node)
GL Account A1 0 0 0
GL Account A2 0 0 0
GL Account L1 1 2 3
GL Account L2 25 5 30
GL Account I3 0 0 0
GL Account I4 0 0 0
L -Income Statement node (Group account structure node)
GL Account A1 0 0 0
GL Account A2 0 0 0
GL Account L1 0 0 0
GL Account L2 0 0 0
GL Account I3 5 7 12
GL Account I4 42 3 45
In our case the desired displayed result shall be:
Profit Center 1 Profit Center 2 Total
A -Assets (Group account structure node)
GL Account A1 10 15 25
GL Account A2 5 5 10
L -Liabilities node (Group account structure node)
GL Account L1 1 2 3
GL Account L2 25 5 30
L -Income Statement node (Group account structure node)
GL Account I3 5 7 12
GL Account I4 42 3 45
I would be gratefull if you could advise for a solution (OSS note or other) knowing that:
Zero suppression is active on the structure
Zero suppression is active on rows & columns on the report
If only one drill is active, the suppression works.
Many thanks
Edited by: barabace on Mar 4, 2009 10:51 AM
Edited by: barabace on Mar 4, 2009 10:52 AM
Edited by: barabace on Mar 4, 2009 10:52 AM
Edited by: barabace on Mar 4, 2009 10:53 AM
Edited by: barabace on Mar 4, 2009 10:53 AMHi barabace,
if you are using structure then at the structure properties in display tab check on Apply zero suppression to this structure. this solve your problem.
Regards, -
Hello Experts,
I have an issue in Bex,
For ex i have a value (-12345) but i want it to be displayed as (12345) so I Multiplied it with (-1),This works fine.
Now the issue is if i have the value as (0) and then (-1 * 0)= 0.0, this I want to get zero suppressed but this does not happen and the row displays as (0.0)
Dont know why its happening
Please help.
Thanks in advance.
-KaranHi Karan,
If you want to supress zeros Try this method.go to conditions tab-rt clk and select new-Then in keyfigures select any keyfigure and operator NE 0 and select ok.
Hope it works.
Regards,
AL -
Hi all,
For the key figures, the option of "Calculate Results As Average of Detailed Values That Are Not Zero, Null, or Error" works fine for characteristics drilldown without hierarchies, but with hierarchies it simply doesn't work; instead of calculate the overall result as average, the system calculates it as SUM. It works like the option "Nothing Defined" where the results provided by the analytic engine are displayed. No local calculation takes place.
How can I do to display the overall result of hierarchical drilldown of a characteristic as an average?
Many thanks in advance!
AbrahamIt is usually best to just keep it as simple as possible. What do you think the code in the OR Array Elements does? I imagine it is just a simple FOR loop with a variable to keep the latest OR. So I would do what GerdW just showed with the FOR loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Continuous inventory based on zero stock check doesn't work
Hello!
The contiunous inventory based on zero stock check doesn't work.
The problem is that I ticked both signs in the customizing for zero
stock check and it doesn't work. The box for zero stock check
appears, but if you check afterwards the inventory with LX25 nothing
is done.
Could the problem be that I my inventory method is PZ - continuous
inventory?
Help urgently needed!
ThanksNow I can see the problem - fault of a beginner!
I have not created any inventory document including this storage bins.
Now my question is, how to create this?
I have tried to create one for the continuous inventory stock, but I'm not able
to book any goods movement on it because it is locked.
Please help me how to create the inventory document, so that
the continuous inventory based on zero stock check works.
Kind regards,
Barbara -
JHS: Export to Excel doesn't work when having leading zeros
Oracle JHeadstart Release 11.1.1.2.29
We are using the Export to excel option, but when we have leading zeros it doesn't export it as text so the data is incorrect.
Can any one please tell how doe we configure JHeadstart/ADF to have the leading zeros and export it as text rather than as number.
Regards
RamRam,
Export to excel is native ADF feature,not related to JHeadstart. Please post your question on the JDeveloper forum.
Steven davelaar,
JHeadstart team. -
Measure Filtering in Universe Linked to Bex for zero suppression
Hi All,
I've a BO explorer(polestar) report linked to a universe and connected to a Bex report.
Suppress Zeros option on BEX did not effect Universe.
I need to suppress zeros by filtering a measure in Universe. Can you please help me solving this?
The need is ,BO Explorer report shows averages according to Retail Location but the measure ( aggregation level is set to average in Universe) shows wrong number as it takes the records equal to zero.
Thanks in advance,
Ozan ErogluIt doesn't work if you have retail location(plant) in your report, universe takes all the records including zeros.
Thanks anyway, any other idea?? -
What to do when your program doesn't work.
A huge number of posts here seem to relate to code that has been written (one presumes by the poster), but which doesn't work.
I get the impression that people don't know what to do next.
It's really not that difficult. When you're writing your program you constantly have in mind what you expect will happen as a result of each bit of code that you put.
If at the end of the day, the program as a whole doesn't behave as you expected, then somewhere in there there must be a point at which the program starts doing something that doesn't correspond to what you anticipated. So, you add some System.err.println statements to test your beliefs.
Consider this program that tests whether a number is prime.
public class Test
public static void main(String args[])
// Get the number to test.
int number = Integer.parseInt(args[0]);
// Try each possible factor.
int factor;
for(factor = 2; factor < number; factor++)
// See whether it is really a factor.
if(number / factor == 0)
break;
if(factor == number)
System.out.println("Number is not prime.");
else
System.out.println("Number is prime.");
}Straight forward enough, but it doesn't actually work :( It seems to say that every number is not prime. (Actually, not quite true, but I didn't test it that carefully, since it didn't work).
Now, I could scrutinise it for errors, and then, having failed to find the problem, I could post it here. But let's suppose I'm too proud for that.
What might be going wrong. Well, how sure am I that I'm even managing to capture the number of interest, number. Let's put in a System.err.println() to test that.
Is the program in fact trying the factors I expect? Put in System.err.println() for that.
Is the program correctly determining whether a number is a factor? Need another System.err.prinln (or two) for that.
public class Test
public static void main(String args[])
// Get the number to test.
int number = Integer.parseInt(args[0]);
System.err.println("Number to check is " + number);
// Try each possible factor.
int factor;
for(factor = 2; factor < number; factor++)
System.err.println("Trying factor " + factor);
// See whether it is really a factor.
if(number / factor == 0)
System.err.println(factor + " is a factor.");
break;
System.err.println(factor + " is not a factor.");
if(factor == number)
System.out.println("Number is not prime.");
else
System.out.println("Number is prime.");
}Let's try with on the number 6.
The output is:
Number to check is 6
Trying factor 2
2 is not a factor.
Trying factor 3
3 is not a factor.
Trying factor 4
4 is not a factor.
Trying factor 5
5 is not a factor.
Number is not prime.
Whoah! That's not right. Clearly, the problem is that it's not correctly deciding whether a number is a factor. Well, we know exactly where that test is done. It's this statement:
if(number / factor == 0)Hmm.... let's try 6 / 3, 'cos 3 is a factor.
6 / 3 = 2.
But that's not zero. What the.... Oh - I see, it should have been number % factor.
Ok - let's fix that, and run it again.
Now the output is:
Number to check is 6
Trying factor 2
2 is a factor.
Number is prime.
Not the right answer, but at least it's now figured out that 2 is a factor of 6. Let's try a different number.
Number to check is 9
Trying factor 2
2 is not a factor.
Trying factor 3
3 is a factor.
Number is prime.
Again, got the right factor, but still the wrong answer. Let's try a prime:
Number to check is 7
Trying factor 2
2 is not a factor.
Trying factor 3
3 is not a factor.
Trying factor 4
4 is not a factor.
Trying factor 5
5 is not a factor.
Trying factor 6
6 is not a factor.
Number is not prime.
Aagh! Obvious - the final test is the wrong way round. Just fix that, remove that System.err.println()s and we're done.
Sylvia.Consider this program that tests whether a number is
prime.
[attempt to divide by each integer from 2 to n-1]At risk of lowering the signal to noise ratio, I
should point out that the algorithm given is just
about the worst possible.
I know that the point was to illustrate debugging
and not good prime test algorithms, and I disagree
with the correspondent who thought the post was
condescending.
Anyway, the java libraries have good prime testing
methods based on advanced number theory research that the
non-specialist is unlikely to know. Looking at the java
libraries first is always a good idea.
Even with the naive approach, dramatic improvements
are possible.
First, only try putative divisors up to the square root
of the number. For 999997 this is about 1000 times faster.
Next only try dividing by prime numbers. This is about
7 times faster again. The snag, of course, is to find the
prime numbers up to 1000, so there might not be much
advantage unless you already have such a list. The sieve
of Erastosthenes could be used. This involves 31 passes
through an array of 1000 booleans and might allow an
improvement in speed at the expense of space.
Sorry if I've added too much noise :-) -
[SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio
EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed the problem 100%.
#### BEGIN ORIGINAL POST: ################################
Hey guys,
I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
[Backstory]
So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
[/backstory]
[tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
Attempted solutions:
[1]
Extract, modify, recompile DSDT and include it with the kernel compilation .config options
CONIFG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
CONIFG_STANDALONE=n
as suggested here, a page linked to by the arch wiki page on DSDT.
I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
[2]
Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
[3]
The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
Sep 13 11:51:03 localhost kernel: [ 11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 13 11:51:03 localhost kernel: [ 11.753434] ACPI: AC Adapter [ADP1] (on-line)
The corresponding line now reads
ACPI: AC Adapter [ADP1] (on-line)
(The same goes for the battery BAT0)
but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
[4]
The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
Thanks to anyone who's read this far. Please let me know if you have any ideas how to get my system to use a customized DSDT.
Last edited by paraffin (2011-09-29 23:20:30)Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
Anyway, so I tried another compile with
CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
Unfortunately it still didn't load the DSDT!
I did catch a quick little error message that turned up in kernel.log though;
/var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [ 0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
Anyway, thanks for your help and time: -
Lirc doesn't work (Lifeview FlyVideo 98FM LR50) SOLVED
Hi. (Solution below).
I've a problem with lirc. My card used to work with exactly the same configuration for years (first on Slack, then Ubuntu).
That's what I've done (btw it's my first day with Arch, and I'm impressed):
cp /usr/share/lirc/remotes/life-view/lircd.conf.flyvideo /etc/lircd.conf
[root@greblushq greblus]# uname -r
2.6.19-ARCH
[root@greblushq greblus]# pacman -Q | grep lirc
lirc 0.8.0.20061009-2
lirc-utils 0.8.0.20061009-2
i'm loading the bttv module this way:
modprobe bttv card=56 radio=1 pll=1
(I've added bttv lirc_dev lirc_gpio to the rc.conf MODULES and lircd to DAEMONS, also options bttv card=56 radio=1 pll=1 went to /etc/modprobe.conf, but doing this manually should be the same)
then
modprobe lirc_dev
modprobe lirc_gpio
[root@greblushq greblus]# /etc/rc.d/lircd start
:: Starting LIRC Daemon [DONE]
now, when i start irexec (as a normal user or root) and then irw, it's starting, but irw doesn't show buttons i press and it's... not working.
One thing that bothers me is the lack of lifevideo among the drivers supported by lircd (lircd --drivers=help).
I was trying to recompile it with configure --with-driver=flyvideo and lirc builds fine, but I'm unable to build lirc-utils (no linux.h header). What's strange they're compiled --with-driver=all so flyvideo should be compiled-in.
What should I do? Were there any changes I'm simply not aware of, or I'm doing something wrong?
---SOLVED---
Finally I have it working.
Something must have changed in the recent kernels. My card isn't automatically detected when loading bttv module (and never was), so I was loading the module as above, with card=56 modprobe option. It was working, but recently (2.6.19) mode2 -d /dev/lirc0 showed that there was nothing going on when buttons were pressed.
I started fiddling with different card ids and with card=35 mode2 outputed some keycodes. That was it.
All I had to do, was to generate a new lircd.conf using irrecord. Now it works even better than before (i can press buttons when the remote is in an arbitrary position).
lspci says it's 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11), the card is a flyvideo 98 with fm tuner.
Now i've a perfectly working Arch installation (lirc was the last thing missing from my previous distro).
Automatically generated lircd.conf file:
begin remote
name flyvideo
bits 8
eps 30
aeps 100
one 0 0
zero 0 0
gap 199963
toggle_bit 0
begin codes
1 0x18
2 0x04
3 0x14
4 0x1C
5 0x02
6 0x12
7 0x1A
8 0x06
9 0x16
0 0x1E
POWER 0x00
FULL_SCREEN 0x08
CHAN_PLUS 0x09
CHAN_MINUS 0x19
SQUARE 0x17
MUTE 0x1B
MOUSE_MODE 0x10
ENTER 0x01
DOWN 0x13
UP 0x0E
ESC 0x0B
RETURN 0x03
VOL_PLUS 0x05
VOL_MINUS 0x1D
MENU 0x0C
RIGHT 0x15
INC 0x0A
DEC 0x0D
end codes
end remoteDid you try to build it directly from the source from the lirc site? or did you recompile it with abs? abs should normally not give any problem.
I recommend srcpac to make updates easy.
This is really neat .
Here's what I've done:
1. first, to be absolutely sure i've what i need I ran abs to get the build system files.
2. installed srcpac, then added:
conf_lirc=('#--with-driver=all#--with-driver=flyvideo#')
conf_lircXutils=('#--with-driver=all#--with-driver=flyvideo#')
to the srcpac.conf, srcpac -So shows that the substitutions are correct.
srcpac -Sb lirc went fine, but lirc-utils failed:
/var/abs/extra/system/lirc-utils/src/lirc/drivers/lirc_dev/lirc_dev.c:35:26: error: linux/config.h: No such file or directory
make[5]: *** [/var/abs/extra/system/lirc-utils/src/lirc/drivers/lirc_dev/lirc_dev.o] Error 1
I found on Google that linux/config.h should be replaced by linux/autoconf.h, after this change it builds, but still lircd --driver=help shows only the default driver (no flyvideo) and it doesn't work. -
'Find' function doesn't work on some HP documents
For some pdf doc's I downloaded from HP, if I copy some characters from the text and then paste them into the Find box, the characters show up as hieroglyphs (mostly squares) in the Find box. And then actually executing the Find using those characters doesn't work, because it can't find the very word that I copied them from! On top of that, if I manually type a word into the Find box (showing normal letters), it won't find it even though I can see it within the text on the page showing on the screen. Very strange! In documents other than these old HP documents, the Find function works fine.
I looked into the document properties (menu: File >> Properties >> Fonts) and see that there are 9 fonts that have names I have never heard of before, and those fonts say "(Embedded Subset)" after the font name and "Encoding: Custom" in the font descriptions. There were a few normal fonts listed before these for that document as well.
Anyone have any idea what is going on?
- BradIt's hard to say without seeing the actual, source content, but given what you are describing, I would venture a guess that the source content is of too poor a quality to OCR reliably and accurately. To test this theory, after running OCR, identify a term that you can confirm is present, but that the search feature cannot identify. Then, copy and paste that term into Word or Notepad. What I expect you will note is that a "0" (zero) has been identified as an "8," and other things of that nature. OCR processing is garbage in, garbage out, so the source always has to be considered. Repeat this process across the document to see if experience similar results.
You don't describe how exactly you are transferring the microfilm "images" to PDF, so it's difficult to say if that process is at issue or could be improved. I suspect that's contributing to the problem, though.
Finally, with regard to the degraded image quality, you want to make sure you are selecting "Searchable Image (Exact)" from the OCR dialogue. ClearScan or any type of downsampling will likely cause or contribute to the type of issue you are describing. In a situation with low-quality source material, you would not want to use these other options.
Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
www.pdflitigationguide.com
Maybe you are looking for
-
SharePoint 2010 search error on searchadministration.aspx page in Windows Server 2012
Hi, I am facing the below error on when I click on any of the page under the Search Serve System.ArgumentException: Could not find the sitemap node with URL '/searchadministration.aspx'. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdmi
-
Dear All, I have a material with make to order strategy 20. now when sales order comes, MRP plans material on the basis of that order. but client wants that when order comes then they can start production. but in sap, after order mrp plans material t
-
DEvice Switch Wizard transferring from Palm Desktop
I just got my Blackberry 9700 replacing my previous Palm 755. When I first used the Device Switch Wizard form the Blackberry Desktop Manager I was able to transfer all the data from my Palm Desktop to my Blackberry. I performed this for about four ti
-
Aperture 3 library file organization question
I tried searching for an answer to this question but I had no luck. Perhaps I was searching on the wrong keywords. In the older version of Aperture, you could look in the "guts" of the library and see individual projects, but as far as I can tell wi
-
RMAN-05520: database name mismatch
Hi All, My DB Version :11.2.0 OS :Linux What i am doing is to try duplicating the database on the same machine using RMAN. But what happens when i am trying to run the below mentione command i am getting below error RMAN> duplicate target database to