Zip text attachment using so_document_send_api1
hi
i have a requirement to send the text file attachment and mail after zipping the attachment.
I have used fm so document send api1 to attach the text file and send to mail.But somehow i am not able to zip the file first.
i have also tried using the fm so new document send api1 but again no success.
Can someone send me a full sample code which i can refer ?.
Thanks in advance
A more precise statement might get you better answers.... "But somehow i am not able to zip the file first." Does that mean your program can't obtain the file or that you are unable to attach to emai or ??
See SAP Note 609696 for working code samples and documentation for these APIs, if you want to continue to use these out-of-date methods ( see BCS classes/sample programs for state-of-product email).
Similar Messages
-
Excel attachment using SO_DOCUMENT_SEND_API1
Hi
I am using FM SO_DOCUMENT_SEND_API1 to send .XLS attachment from ABAP program.
I am using following code to calculate the size.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_size = t_packing_list-body_num * 255.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
(I have posted only relevant code)
This was working fine in 4.7. But since upgrade to 6.0, the attachment is transferred only half the actual size.
i.e. if my internal table shows 4 records, the attachment in the mail shows only 2 records.
What can be done in this case. A simple solution would be to multiply the size by 2.
t_packing_list-doc_size = t_packing_list-body_num * 255 * 2.
This works, but does seem like a work around.
What could be the reason for this and what should be the solution?Hi,
I am also using 6.0 and similar logic is working fine to calculate the size. I think there must be some problem some where else in the code. Can you put your code that you have used.
Thanks & Regards
Rocky -
Sending text Attachment using UTL_SMTP
Hi,
I am using UTL_SMTP package for sending a text file thru' a mail.
Our database is in a unix machine. My file is created in a folder oracle/DEV/CCare/Data which is in the root directory.
In the URL argument of the procedure,which is a varchar2 type, i am passing the path as 'oracle/DEV/CCare/Data'. Also i have tried passing '/oracle/DEV/CCare/Data' like this. But none of them is working could anybody suggest way of passing the URL.
The package arguments look like below.
oks_mail.send_attachment(sender => l_fromemailid,
recipient_tbl => to_mail_tbl,
subject => 'Progress report for CCC Feed',
mail_text => l_mailtext1,
url => '//10.10.81.3/oracle/DEV/CCare/Data',
file_name => filename);Use
FILE_ARRAY(1) := file_name;
RETURN_DESC1 := '10 - E: THERE WAS AN ERROR IN OPENING CONNECTION. ';
CONN:= UTL_SMTP.OPEN_CONNECTION( L_SMTP_SERVER, L_SMTP_SERVER_PORT ); /** OPEN CONNECTION ON THE SERVER **/
UTL_SMTP.HELO( CONN, L_SMTP_SERVER ); /** DO THE INITIAL HAND SHAKE **/
UTL_SMTP.MAIL( CONN, L_SENDER_NAME );
RETURN_DESC1 := '20 - E: THERE WAS AN ERROR IN CREATING RECEIPIENTS. ';
UTL_SMTP.RCPT( CONN, '[email protected]');
UTL_SMTP.OPEN_DATA ( CONN );
--Send_header('Subject', 'File - ');
/*** GENERATE THE MIME HEADER ***/
RETURN_DESC1 := '30 - E: THERE WAS AN ERROR IN GENERATING MIME HEADER. ';
L_MESG:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' )|| CRLF ||
'From: ' || L_SENDER_NAME || CRLF ||
'Subject: ' || file_name || CRLF ||
'To: ' || L_MSG_TO || CRLF ||
'Mime-Version: 1.0' || CRLF ||
'Content-Type: multipart/mixed; boundary="DMW.Boundary.605592468"'|| CRLF ||
'' || CRLF ||
'This is a Mime message, which your current mail reader may not' || CRLF ||
'understand. Parts of the message will appear as text. If the remainder' || CRLF ||
'appears as random characters in the message body, instead of as' || CRLF ||
'attachments, then you''ll have to extract these parts and decode them' || CRLF ||
'manually.' || CRLF ||'' ;/*|| CRLF ||
'--DMW.Boundary.605592468' || CRLF ||
'Content-Type: text/plain; name="message.txt"; charset=US-ASCII' || CRLF ||
'Content-Disposition: inline; filename="message.txt"' || CRLF ||
'Content-Transfer-Encoding: 7bit' || CRLF ||
'' || CRLF || CRLF || CRLF || CRLF ;*/
L_MESG_LEN := LENGTH(L_MESG);
IF L_MESG_LEN > MAX_SIZE THEN
MESG_LENGTH_EXCEEDED := TRUE;
END IF;
RETURN_DESC1 := '40 - E: THERE WAS AN ERROR IN WRITING MESSAGE TO CONNECTION. ';
UTL_SMTP.WRITE_DATA ( CONN, L_MESG );
/*** START ATTACHING THE FILES ***/
FOR I IN 1..1 LOOP
EXIT WHEN MESG_LENGTH_EXCEEDED;
IF FILE_ARRAY(I) IS NOT NULL THEN
BEGIN
L_SLASH_POS := INSTR(FILE_ARRAY(I), '/', -1 );
IF L_SLASH_POS = 0 THEN
L_SLASH_POS := INSTR(FILE_ARRAY(I), '\', -1 );
END IF;
L_DIRECTORY_NAME := SUBSTR(FILE_ARRAY(I), 1, L_SLASH_POS - 1 );
L_FILE_NAME := SUBSTR(FILE_ARRAY(I), L_SLASH_POS + 1 );
RETURN_DESC1 := '50 - E: THERE WAS AN ERROR IN OPENING FILE. ';
L_FILE_HANDLE := UTL_FILE.FOPEN(L_DIRECTORY_NAME, L_FILE_NAME, 'R' );
L_MESG := CRLF || '--DMW.Boundary.605592468' || CRLF ||
'Content-Type: application/octet-stream; name="' || L_FILE_NAME || '"' || CRLF ||
'Content-Disposition: attachment; filename="' || L_FILE_NAME || '"' || CRLF ||
'Content-Transfer-Encoding: 7bit' || CRLF || CRLF ;
L_MESG_LEN := L_MESG_LEN + LENGTH(L_MESG);
UTL_SMTP.WRITE_DATA ( CONN, L_MESG );
LOOP
RETURN_DESC1 := '60 - E: THERE WAS AN ERROR IN READING FILE. ';
UTL_FILE.GET_LINE(L_FILE_HANDLE, L_LINE);
IF L_MESG_LEN + LENGTH(L_LINE) > MAX_SIZE THEN
L_MESG := '*** truncated ***' || CRLF;
UTL_SMTP.WRITE_DATA ( CONN, L_MESG );
MESG_LENGTH_EXCEEDED := TRUE;
EXIT;
END IF;
L_MESG := L_LINE || CRLF;
UTL_SMTP.WRITE_DATA ( CONN, L_MESG );
L_MESG_LEN := L_MESG_LEN + LENGTH(L_MESG);
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
out_errcode:=-500;
WHEN UTL_FILE.INVALID_PATH THEN
RAISE ABORT_PROGRAM;
WHEN OTHERS THEN
RAISE ABORT_PROGRAM;
END;
L_MESG := CRLF;
UTL_SMTP.WRITE_DATA ( CONN, L_MESG );
UTL_FILE.FCLOSE(L_FILE_HANDLE);
END IF;
END LOOP;
RETURN_DESC1 := '70 - E: THERE WAS AN ERROR IN CLOSING MIME BOUNDARY. ';
L_MESG := CRLF || '--DMW.Boundary.605592468--' || CRLF;
UTL_SMTP.WRITE_DATA ( CONN, L_MESG );
UTL_SMTP.CLOSE_DATA( CONN );
UTL_SMTP.QUIT( CONN ); -
How to send a file as an attachment using mailx
Hi
Can any one tel me how to send a file as an attachment using mailx command in shell script.
Thanks,
Suman.Wrong forum where to ask such questions.
Check this one link:
http://www.unix.com/shell-programming-scripting/18370-sending-email-text-attachment-using-mailx.html?t=18370#post70254 -
Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1
hello guys, i'm a newbie here.
I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
REPORT ZHR_TESTEMAIL .
TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
DATA: FOLD_YR(2) TYPE C,
FOLD_TYPE(3) TYPE C,
G_HEADER LIKE SOOD2,
G_FOLMAM LIKE SOFM2,
METHOD1 LIKE SY-UCOMM,
G_DOCUMENT LIKE SOOD4,
G_USER LIKE SOUDNAMEI1,
FOLD_NUMBER(12) TYPE C,
G_NEW_PARENT LIKE SOODK,
G_OWNER LIKE SOUD-USRNAM,
G_REF_DOCUMENT LIKE SOOD4,
G_USER_DATA LIKE SOUDATAI1,
G_AUTHORITY LIKE SOFA-USRACC,
G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF G_FILES OCCURS 10 ,
TEXT(4096) TYPE C,
END OF G_FILES.
DATA: BEGIN OF IT_WS_FILE OCCURS 0,
WS_FILE LIKE RLGRAP-FILENAME,
END OF IT_WS_FILE.
DATA: BEGIN OF IT_SAPID OCCURS 0,
SAPID LIKE USR02-BNAME,
END OF IT_SAPID.
DATA: BEGIN OF IT_EMAIL OCCURS 0,
EMAILADD LIKE PA0105-USRID_LONG,
END OF IT_EMAIL.
DATA: BEGIN OF IT_TSP01 OCCURS 0.
INCLUDE STRUCTURE TSP01.
DATA: END OF IT_TSP01.
DATA: BEGIN OF TAB2 OCCURS 50,
TEXT(200) TYPE C,
END OF TAB2.
DATA: V_DOCDATA TYPE SODOCCHGI1,
V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
V_OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJHEX LIKE SOLIX OCCURS 0 WITH HEADER LINE,
IT_RECVRS TYPE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
IT_CONTNT TYPE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_BODY LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
V_TLIN TYPE I,
V_LINE TYPE I.
DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
TEXTLINE(5000),
END OF IT_TEXTLINE.
DATA: FYL LIKE RLGRAP-FILENAME,
GV_SUBNO LIKE SOSU-SUBNO,
GV_EMAIL LIKE PA0105-USRID_LONG,
GV_NEXTDAY LIKE SY-DATUM,
YEAR(4) TYPE C,
RECFLAG TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
PARAMETERS: SUBJ(254) TYPE C OBLIGATORY, "Subject
DESC(254) TYPE C. "Message
SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM.
SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM2.
SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT2 RADIOBUTTON GROUP A. "Server
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT3 RADIOBUTTON GROUP A. "Spool
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER. "Spool Number
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PARAM3.
SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PROC.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
CLEAR: WS_FILE_TEMP.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SY-DYNNR
FIELD_NAME = 'WS_FILE'
IMPORTING
FILE_NAME = WS_FILE_TEMP.
WS_FILE-LOW = WS_FILE_TEMP.
AT SELECTION-SCREEN.
SELECT SAPNAM FROM SOUC
INTO TABLE IT_SAPID
WHERE SAPNAM IN SAPID
AND DELETED = ''.
GV_NEXTDAY = SY-DATUM + 1.
LOOP AT EMAILADD.
IT_EMAIL-EMAILADD = EMAILADD-LOW.
APPEND IT_EMAIL.
CLEAR: IT_EMAIL.
ENDLOOP.
IF NOT BPROC IS INITIAL.
CLEAR: RBUT1, RBUT3.
RBUT2 = 'X'.
ELSE.
CLEAR: RBUT2.
ENDIF.
IF NOT RBUT3 IS INITIAL.
REFRESH: WS_FILE.
ENDIF.
IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
MESSAGE E000(ZZ) WITH TEXT-201.
ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
CLEAR IT_SAPID.
READ TABLE IT_SAPID.
SELECT SINGLE SUBNO FROM SOSU
INTO GV_SUBNO
WHERE USRNO IN ( SELECT USRNO FROM SOUC
WHERE SAPNAM = IT_SAPID-SAPID ).
IF SY-SUBRC NE 0.
MESSAGE E000(ZZ) WITH TEXT-202.
ENDIF.
CLEAR: IT_SAPID.
ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
CLEAR: IT_SAPID, IT_EMAIL.
READ TABLE IT_SAPID.
READ TABLE IT_EMAIL.
SELECT SINGLE SUBNO FROM SOSU
INTO GV_SUBNO
WHERE USRNO IN ( SELECT USRNO FROM SOUC
WHERE SAPNAM = IT_SAPID-SAPID ).
IF SY-SUBRC NE 0.
SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
WITH SUB_ESC EQ 'U'
WITH EDAT EQ SY-DATUM
WITH BDAT EQ SY-DATUM
WITH BDAT EQ GV_NEXTDAY
WITH EDAT EQ '99991231'
WITH BTIM EQ SY-UZEIT
WITH ETIM EQ '240000'
WITH FORW_ALL EQ 'X'
WITH PSTHR2 EQ ''
AND RETURN.
ENDIF.
CLEAR: IT_SAPID.
ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
RECFLAG = 'X'.
ENDIF.
START-OF-SELECTION.
PERFORM B_SENDMAIL.
FORM B_SENDMAIL.
YEAR = SY-DATUM+0(4).
LOOP AT WS_FILE.
CLEAR: FYL.
FYL = WS_FILE-LOW.
REFRESH: TAB2.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FYL
FILETYPE = 'BIN'
TABLES
DATA_TAB = TAB2.
IT_TEXTLINE[] = TAB2[].
DOCUMENT_DATA (SUBJECT OF MAIL)
V_DOCDATA-OBJ_NAME = DESC.
V_DOCDATA-OBJ_DESCR = SUBJ.
V_DOCDATA-OBJ_LANGU = SY-LANGU.
V_DOCDATA-SENSITIVTY = 'C'.
V_DOCDATA-OBJ_PRIO = '1'.
BODY OF MAIL
IT_BODY-LINE = 'Collection Report'.
APPEND IT_BODY.
CONTENTS_TXT (Attachments)
IT_CONTNT[] = IT_TEXTLINE[].
DESCRIBE TABLE IT_CONTNT LINES V_LINE.
READ TABLE IT_CONTNT INDEX V_LINE.
PACKING_LIST
V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
V_OBJPACK-TRANSF_BIN = 'X'.
V_OBJPACK-HEAD_START = 1.
V_OBJPACK-HEAD_NUM = 0.
V_OBJPACK-BODY_START = 1.
V_OBJPACK-BODY_NUM = V_LINE.
V_OBJPACK-DOC_TYPE = 'TXT'.
V_OBJPACK-OBJ_NAME = 'ATTACHMENT'.
V_OBJPACK-OBJ_DESCR = 'Attached Document'.
APPEND V_OBJPACK.
CLEAR V_OBJPACK.
RECEIVERS of mail
IF RECFLAG IS INITIAL.
LOOP AT IT_SAPID.
IT_RECVRS-RECEIVER = IT_SAPID-SAPID.
IT_RECVRS-REC_TYPE = 'B'.
IT_RECVRS-COM_TYPE = ''.
IT_RECVRS-EXPRESS = 'X'.
IT_RECVRS-NO_FORWARD = ''.
IT_RECVRS-NO_PRINT = ''.
APPEND IT_RECVRS.
CLEAR IT_RECVRS.
ENDLOOP.
ELSE.
LOOP AT EMAILADD.
IT_RECVRS-RECEIVER = EMAILADD-LOW.
IT_RECVRS-REC_TYPE = 'U'.
IT_RECVRS-COM_TYPE = 'INT'.
IT_RECVRS-EXPRESS = 'X'.
APPEND IT_RECVRS.
CLEAR IT_RECVRS.
ENDLOOP.
ENDIF.
OBJECT_HEADER (Filename)
CONCATENATE 'Collection Report' '_'
SY-DATUM+4(4) YEAR '.TXT'
INTO V_OBJHEAD-LINE.
V_OBJHEAD-LINE = FYL+16(25).
APPEND V_OBJHEAD.
CLEAR V_OBJHEAD.
Function Module For Sending Mail with Attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = V_DOCDATA
TABLES
PACKING_LIST = V_OBJPACK
OBJECT_HEADER = V_OBJHEAD
CONTENTS_HEX = IT_CONTNT
CONTENTS_TXT = IT_BODY
RECEIVERS = IT_RECVRS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
MESSAGE S000(ZZ) WITH TEXT-005.
ELSE.
MESSAGE S000(ZZ) WITH TEXT-006.
ENDIF.
ENDLOOP.
end of my code *
please help me guys... when i run this program, DOCUMENT_NOT_SENT is what i always get..
waiting for ur reply... thank you vey much and godbless.Hi,
Try this sample code.
FORM SEND_TO_EMAIL USING zFName.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: ctmp(50) TYPE C.
Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'JOURNAL'.
CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
SEPARATED BY SPACE.
DOC_CHNG-OBJ_DESCR = cTmp.
OBJTXT = 'SAP Payroll Journal'.
APPEND OBJTXT.
CONCATENATE 'For Period' pybegda INTO ctmp
SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
CONCATENATE 'Attached File :' zFname INTO ctmp
SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
OBJTXT = 'Please find the attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
<b>LOOP AT xMail.
CONDENSE xMail-aline.
OBJBIN = xMail-aline.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.</b>
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = zFname. APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
OBJPACK-OBJ_NAME = 'DATA'.
OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
LOOP AT PENERIMA.
CONDENSE PENERIMA-PNRM.
RECLIST-RECEIVER = PENERIMA-PNRM.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
ENDLOOP.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = ' '
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT RECLIST.
WRITE: / RECLIST-RECEIVER(48), ':'.
IF RECLIST-RETRN_CODE = 0.
WRITE / 'The document was sent'.
ELSE.
WRITE / 'The document could not be sent'.
ENDIF.
ENDLOOP.
WHEN 1.
WRITE: / 'Too many receiver'.
WHEN 2.
WRITE: / 'Document could not be sent to any recipient'.
WHEN 4.
WRITE: / 'No send authorization'.
WHEN OTHERS.
WRITE: / 'Error occurred while sending'.
ENDCASE.
ENDFORM. -
Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.
Kolyei, sorry for the late reply.
Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages. -
Complete code to send an attachment with a text message using java mailapi
complete code to send an attachment with a text message using java mailapi
code should be free from errorhttp://java.sun.com/products/javamail/FAQ.html#examples
Was this code too hard to find?
Was the FAQ too hard to find? -
Attachment with no extension using SO_DOCUMENT_SEND_API1
Hi,
anyone know if it is possible to create a txt file email attachement with SO_DOCUMENT_SEND_API1 but NOT to have the attachment name with the '.txt' extension?
I would like the attachment to be 'filename.001' but when it is emailed it being sent as 'filename.001.txt'
thanks.Hi,
Have you tried like:
t_packing_list-doc_type = 'RAW'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_data
* PUT_IN_OUTBOX = ' '
commit_work = 'X'
IMPORTING
sent_to_all = lv_flag
* NEW_OBJECT_ID =
TABLES
packing_list = t_packing_list -
Hi,
I want to send E-Mail as a .txt attachment.
I tried using FM SO_DOCUMENT_SEND_API1, but its giving the sy-subrc = 2 (I.E document_not_sent) .
Is 4.5B supports the text attachment ?
is any configration requried?
we have development and Quality clients this below code execuated in develpment sucessfully but when iam trying to test in quality client its throwing the error ( document_not_sent)
Below is my code
*--Data declearation
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: L_MSG(100) TYPE C.
* Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'Z2318S1B01'.
DOC_CHNG-OBJ_DESCR = EMSUBJ .
OBJTXT = 'your report from apple vacations is enclosed as
ATTACHMENT'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
* Creation of the document attachment
LOOP AT IT_ATTACHMENT.
OBJBIN = IT_ATTACHMENT-EMAIL.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'Airport Mainfest.txt'.
APPEND OBJHEAD.
* Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'BMP'.
OBJPACK-OBJ_NAME = 'ANLAGE'.
OBJPACK-OBJ_DESCR = 'Representation of object 138'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
* Completing the recipient list
TRANSLATE EMAILID-LOW TO LOWER CASE.
RECLIST-RECEIVER = EMAILID-LOW.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
LOOP AT RECLIST.
IF RECLIST-RETRN_CODE = 0.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE E656 WITH L_MSG.
ENDIF.
ENDLOOP.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'error occurred in sending mail' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ENDIF.
Thanks
Vikranth KhimavathHi,
I want to send E-Mail as a .txt attachment.
I tried using FM SO_DOCUMENT_SEND_API1, but its giving the sy-subrc = 2 (I.E document_not_sent) .
Is 4.5B supports the text attachment ?
is any configration requried?
we have development and Quality clients this below code execuated in develpment sucessfully but when iam trying to test in quality client its throwing the error ( document_not_sent)
Below is my code
*--Data declearation
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: L_MSG(100) TYPE C.
* Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'Z2318S1B01'.
DOC_CHNG-OBJ_DESCR = EMSUBJ .
OBJTXT = 'your report from apple vacations is enclosed as
ATTACHMENT'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
* Creation of the document attachment
LOOP AT IT_ATTACHMENT.
OBJBIN = IT_ATTACHMENT-EMAIL.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'Airport Mainfest.txt'.
APPEND OBJHEAD.
* Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'BMP'.
OBJPACK-OBJ_NAME = 'ANLAGE'.
OBJPACK-OBJ_DESCR = 'Representation of object 138'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
* Completing the recipient list
TRANSLATE EMAILID-LOW TO LOWER CASE.
RECLIST-RECEIVER = EMAILID-LOW.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
LOOP AT RECLIST.
IF RECLIST-RETRN_CODE = 0.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE E656 WITH L_MSG.
ENDIF.
ENDLOOP.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'error occurred in sending mail' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ENDIF.
Thanks
Vikranth Khimavath -
Excel attachment with SO_DOCUMENT_SEND_API1
Hello Everyone,
I am using SO_DOCUMENT_SEND_API1 for sending mail.
It works well with text attachment.
Whereas with excel attachment:
The fn module for sending mail SO_DOCUMENT_SEND_API1 gives return code zero.
The excel attachment mail can be seen in transaction SOST. But its process fails stating that it cannot be converted.
(Message : Message cannot be processed as it cannot be converted)
Can anyone suggest me what might be wrong ??Hi
Please refer these sample progs to send an xcel attachment via mail...
http://www.sapdevelopment.co.uk/reporting/email/attach_xlsmod.htm
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
http://www.sapgenie.com/abap/code/abap31.htm
Regards,
Anjali -
How to download / read text attachment in Sender Mail Adapter IN XI
Hi
I would like to know how to download / read text attachment in sender mail Adapter & sent same attachment to target system using file adapter.
Please help how to design / resolve this concept.
Regards
DSRI would like to know how to download / read text attachment in sender mail Adapter & sent same
attachment to target system using file adapter.
Take help from this blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
From the blog:
However in most cases
our message will not be a part of the e-mail's payload but will be sent as a file attachment.
Can XI's mail adapter handle such scenarios? Sure it can but with a little help
from the PayloadSwapBean adapter module
Once your message (attachment) is read by the sender CC, you can perform the basic mapping requirement (if any) to convert the mail message fromat to the file format.....configure a receiver FILE CC and send the message...this should be the design...
Regards,
Abhishek. -
HOW TO SEND A HEBREW EMAIL WITH ATTACHMENT USING DEMO_MAIL
Hello All,
This is Not a question , just attaching something I've implemented and might be interesting for few of us,
This package I'm attaching allows to send Hebrew Language email + attaching files to it.
This package is based on demo_mail package (combined here but you can search at google for more example information if needed).
My Package is supplied as is , for any specific information regarding it , please contact me directly at : [email protected] or POST here.
* Please also note , that this package allow file to be attach via URL (meaning you will have to define a link to this file, if you would like to implement a link to a local file , e.g : c:\temp\myfile , you will have to customize the package your self with database directories option etc ...)
First I will attach an example of how to use it :
==================================
begin
demo_mail_heb.send_html_mail_attach(p_sender => '[email protected]',
p_recipients => '[email protected]',
p_subject => 'שלום וברכה עולם',
p_data => '<hr><b>בוקר טוב</b><hr>',
p_file_name => 'but_choose_file.gif',
p_file_mime_type => 'application/pdf',
p_file_URL => 'http://10.172.246.160:7777/i/but_choose_file.gif');
end;
Second Here is the Package (please note you will have to modify few settings in order to enable it , such as mail server address ..etc)
======================================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'mail.oracle.com';
smtp_port PLS_INTEGER := 25;
smtp_domain VARCHAR2(256) := 'oracle.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
Utl_Http.set_proxy('www-proxy.us.oracle.com', 'oracle.com');
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Subject" MIME header
write_mime_header(conn, 'Subject', subject);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;Hello All,
Small modification - use this package and not the above
HERE IS A WORKING CODE FOR SENDING HEBREW MESSAGES (INCLUDING SUBJECT IN UTF-8 APPEAR IN ALL EMAIL CLIENTS I HAVE CHECKED) + ATTACHMENTS
Code attached below is supplied as is with no support. anyhow if help is needed , please contact me via [email protected]
============================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_HOST');
smtp_port PLS_INTEGER := pst_ajax.getParameter('EMAIL_SMTP_PORT');
smtp_domain VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_DOMAIN');
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => 'text/html; charset=UTF-8');--p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
v_mime_type varchar2(32767):=demo_mail.MULTIPART_MIME_TYPE;
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => v_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
-- utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2 is
l_str varchar2(2000);
begin
l_str:=utl_raw.cast_to_varchar2(utl_encode.quoted_printable_encode(utl_raw.cast_to_raw(p_str)));
l_str:=replace(l_str,'='||chr(13)||chr(10),''); --unfold the data
l_str:=replace(l_str,'?','=3f'); --quote question marks
l_str:=replace(l_str,' ','=20'); --quote spaces
l_str:='=?'||p_charset||'?Q?'||l_str||'?='; -- add prefix and suffix
return l_str;
end;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- write_mime_header(conn, 'Content-Type', 'text/html; charset=UTF-8');
-- Set "Subject" MIME header
-- write_mime_header(conn, 'Subject', subject);
-- write_mime_header(conn, 'Subject', CONVERT(subject,'IW8ISO8859P8'));
write_mime_header(conn, 'Subject',mimeheader_encode(p_str => subject,p_charset => 'UTF-8'));
-- write_mime_header(conn, 'Subject',CONVERT(subject,'IW8MSWIN1255'));
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END; -
Email with text attachment with line width 1250
Dear all,
I want to send the email with text attachment whose line width in text file is 1250. Kindly let me know how to send email attachment with more than 255 line width.
Regards,
Manoj
Moderator Message: Frequently Asked Question. Please search for available information before posting.
Edited by: kishan P on Apr 29, 2011 2:48 PMHi,
What ever text you are sending in the email, create a standard text for it using tcode SO10. In the program use the FM READ_TEXT to get the data into internal table which will be of length 132 char. If you want line widht of 255 chars convert using FM SX_TABLE_LINE_WIDTH_CHANGE as below,
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_dst = '255'
TABLES
content_in = it_data
content_out = it_mess_att
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
Use FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send email.
Hope this will help you.
regards,
Tulasi. -
Sending an email with text Content using SMTP Adapter.
I am trying to send an email Message with the .txt attachment using SMTP adapter. I am getting an XML input and I am mapping the input Schema to Flat File Schema. I am trying to Send this Flat File(.txt attachment) in the Email. But I am receiving it as
HTML format only.
The Expression in the Message Transform is,
SMTPUtils.Part.SetContentType(OutgoingFlatFile_Msg.BodyFlatFile,"text");
OutgoingFlatFile_Msg(SMTP.EmailBodyTextCharset)="UTF-8";
DynamicEmailPort(Microsoft.XLANGs.BaseTypes.Address) = "mailto:[email protected]";
OutgoingFlatFile_Msg(SMTP.CC) = "[email protected]";
OutgoingFlatFile_Msg(SMTP.Subject) = "TESTMAIL";
OutgoingFlatFile_Msg(SMTP.From) = "[email protected]";
OutgoingFlatFile_Msg(SMTP.SMTPHost) = "smtp.org";
OutgoingFlatFile_Msg(SMTP.SMTPAuthenticate) = 0;
The Email attachment is HTML format,
<?xml version="1.0" encoding="utf-8"?><ns0:Root xmlns:ns0="http://SampleSMTPEmail.OutgoingFlatFile"><Record><CustomerID>Cus001</CustomerID><OrderID>Ord001</OrderID></Record></ns0:Root>
How to attach the .txt file to the email.Have you tried the following steps:
Create the message (“msgEnvelope”) as a Multi-Part message, with the required message in the Message Body Part (“Attachment”)
Set the following properties of the Envelope Message:
msgEnvelope(SMTP.Subject) = <Email Subject>;
msgEnvelope(SMTP.From) = <Sender Email>;
msgEnvelope(SMTP.SMTPHost) = <Email Host name>";
// This is the default value
msgEnvelope(SMTP.SMTPAuthenticate) = 0;
// Set the message text included in the email
msgEnvelope(SMTP.EmailBodyText) = <Text in body of email>;
// Important - This is required if the EmailBodyText is set
msgEnvelope(SMTP.EmailBodyTextCharset) = "utf-8";
// A value of '1' means include Message Body Part as email attachment
msgEnvelope(SMTP.MessagePartsAttachments) = 1;
Set the following properties of the Message Body Part (“Attachment”):
// Important - Change this MIME type if not sending a Text file
msgEnvelope.Attachment(Microsoft.XLANGs.BaseTypes.ContentType) = "text/plain";
// Set the Filename of the attachment
msgEnvelope.Attachment(MIME.FileName) = <Physical name of the attachment>;
Set the following property on the Dynamic Send Port:
// We set the Email Address on the Port itself
Dynamic_Send_Port(Microsoft.XLANGs.BaseTypes.Address) = <recipient email address>;
http://biztalktalk.wordpress.com/2008/08/28/sending-attachments-through-a-dynamic-send-port/
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Receiver mail adapter - Payload as a Text attachment
Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
PrabaharanHi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM
Maybe you are looking for
-
Log to Track External Drive Connections?
HI, we're just getting a Lion Server setup and running (Mac Mini). We mainly use it for file sharing off of one main external Thunderbolt RAID enclosure (Promise Pegasus R4 running RAID 5). But we've noticed a couple intermittent issues with reading
-
Problem with Playbook Webbrowser
Does anyone have a problem with the integrated webbrowser in the blackberry playbook? Since i update my tablet to os 2.0 the browser crash very often thing that never happen to me before i upgrade the os. The window of the browser close when it crash
-
Query on a table with indexed date field
I have a table with a date column which is indexed. If I run a query like "select column1 where date_field='20-JAN-04' for example it is fast and uses index. If I run select column1 where date < '20-JAN-04' it is slow and doesnt use the index. I logg
-
Submit PDF via email custom button
I followed the instructions in LiveCycle guide but it is not working completely. I set up a custom button and followed the instructions for Submitting a pdf via email. When I click on the submit button, it pulls the pdf into an email but has left
-
How to run two vi's simultaneously?
I am relatively new to labview, so I am not expert enough to figure this out,... yet. I am running a test setup using several pieces of test equipment. Therefore, the screen is pretty busy as it is. At certain points in the test, I want to click on a