Zone with own NIC and IP address

hi all
i just created zones on my SF4800 and no errors.
when i boot that zone i get the following errors.
"could not verify net address=10.xxx.xxx.xxx
physical=qfe1: No such device or address
zoneadm: zone ZWAS502 failed to verify"
how could i solve this ASAP.
thanks
peter

Hi Peter,
i another thread i found this for you:
To access the cdrom in a local zone you woul use zonecfg from the Global Zone
"myzone" being the name of our zone..
zonecfg -z myzone
zonecfg:myzone>add fs
zonecfg:myzone:fs>set dir=/cdrom
zonecfg:myzone:fs>set special=/cdrom
zonecfg:myzone:fs>set type=lofs
zonecfg:myzone:fs>set options=[nodevices]
zonecfg:myzone:fs>end
zonecfg:myzone>verify
zonecfg:myzone>commit
zonecfg:myzone>exit
There is more detail on this in http://developers.sun.com/solaris/articles/application_in_zone.html
Holger

Similar Messages

  • ICal: You must add your own card and email address in Contacts to be able to use mail alerts.

    Problems with Mountain Lion. Have never had these problems previously. Have been a mac user since 1990.
    iTunes no longer sends music to my airport express. NO FIX EXISTS !
    Now iCal every time I want to send an email alert puts up this message: You must add your own card and email address in Contacts to be able to use mail alerts.
    COME ON I HAVE DONE THIS OVER AND OVER TO NO RESULT.
    MACINTOSH WHAT ARE YOU DOING?
    UNHAPPY !

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • You must add your own card and email address in Contacts to be able to use mail alerts. mean

    I am trying to set up notifications in Calendars. I click "custom" and choose email. I get a message"You must add your own card and email address in Contacts to be able to use mail alerts." I have my own email address entered into Contacts, but don't know what this message intends, or how to deal with it. Please advise.
    Thanks

    Thank you Eric. So easy, when you know what you're doing.
    Thanks.

  • Can I sync two iPads with different users and email addresses on the same computer

    Can I sync two IPads with different users and email addresses on the same computer.

    yes, just make sure you turn off auto-sync to keep everything organized before you try syncing
    on a pc
    edit > preferences > devices - 'prevent ipads, iphones, and ipods from syncing automatically' needs to be checked

  • Exclusive IP zone with one dedicated and one shared NIC

    Hi, I have a T series SPARC server belonging to two subnet (2 ethernet connection to 2 different VLAN), one used for mgmt purpose and the other used for application traffic. The server will have a zone which will exclusively use the link for application, therefore making it an exclusive IP zone. but the other mgmt NIC needs to be used for both global and local zone. this mgmt NIC is configured and up in global. But when I create the exclusive IP zone and add the dedicated nic (igb1) and then try add net -> set physical=igb0 -> set address=xxxxx -> end, I get error that I can't use a address in a exclusive IP zone. So my question is, is it possible to share a NIC on a exclusive IP zone? Thanks.

    more info:
    zonecfg:solhost> add net
    zonecfg:solhost:net> set physical=igb3
    zonecfg:solhost:net> set address=192.168.0.12
    zonecfg:solhost:net> end
    zonecfg:solhost> info
    zonename: solhost
    zonepath: /solhost
    brand: native
    autoboot: false
    bootargs:
    pool:
    limitpriv:
    scheduling-class:
    ip-type: exclusive
    hostid:
    fs:
    dir: /u02
    special: con_data
    raw not specified
    type: zfs
    options: []
    net:
    address not specified
    physical: igb2
    defrouter not specified
    net:
    address: 10.246.x.x
    physical: igb3
    defrouter not specified
    zonecfg:solhost> verify
    net: address cannot be specified for an exclusive IP type
    solhost: Invalid argument
    igb2 is not plumb in global zone, exclusively added to this zone. igb3 is plumb and up in global, trying to share it with this zone. is this possible? if not, can I create a vlan tagged NIC out of igb3 and add it to the zone as exclusive? Thanks.

  • Windows server with one NIC and two IP address answers to ping with wrong address.

    Hi,
    I have Windows 2012R2 server, as a web server. It has only one NIC, and I have given it two IP addresses. 10.0.0.11 at the main Window, and under the advanced tab, I have added 10.0.0.12 as additional ip to the nic.  I have even but to
    host file a row, that states 10.0.0.11 server.domain.local.
    Now when I ping "server.domain.local" from the server itself, it gives me 10.0.0.12 as answer.
    With nslookup I can get correct address (10.0.0.11). But when I type server.domain.local to the web browser it tries to connect 10.0.0.12, which is incorrect. It should connect to 10.0.0.11 address. Could you please help me?
    Regards,
    Jouko

    Windows does not work well with two IP addresses on the same subnet.  Results are inconsistent, as you have discovered.  In general, you should never try to put two IP addresses from the same subnet onto a single Windows box.  That means either
    multiple addresses on a single NIC or on multiple NICs.
    Maybe if you tell us what you are trying to accomplish by having two addresses, we could provide better assistance.
    . : | : . : | : . tim

  • Why are emails downloaded with the subject and from address different from what is actually in the email?

    The subject and from address listed in the message pane are totally different from what is in the actual email, viewed either in the preview pane or when the email is opened. The emails are correct when viewed online. For example:
    Email subject A from Sender A - email A
    Email subject B from Sender B - email B
    Email subject C from Sender C - email C
    After downloading to Thunderbird:
    Email subject A from Sender A - email A
    Email subject B from Sender B - email B
    Email subject C from Sender C - email A *** Subject and Sender for C but is actually email A
    This started happening within the past month and appears to be random. Sometimes everything is correct. But more often there are a few that exhibit the above behavior. I have multiple email address downloading from the same domain but this problem seems to occur ostly with my main email account.

    Try to rebuild the index file of the troubled folder.
    Right-click the folder - Properties - Repair Folder

  • Problems with own kernel and nvidia

    Hi.
    I've got a little problem with nvidia driver. I removed stock kernel and compiled my own. Then I installed nvidia drivers (from nvidia.com) and everythings gone fine. But after reboot Xserver doesn't seem to start. The only way to run X is to reinstall nvidia drivers (after every reboot)... anyone knows any solution for that?

    Log:
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "on"
    (**) NVIDIA(0): Option "TripleBuffer" "on"
    (**) NVIDIA(0): Option "AddARGBGLXVisuals"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
    (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
    (EE) NVIDIA(0): that the NVIDIA device files have been created properly.
    (EE) NVIDIA(0): Please consult the NVIDIA README for details.
    (EE) NVIDIA(0): *** Aborting ***
    (II) UnloadModule: "nvidia"
    (II) UnloadModule: "wfb"
    (II) UnloadModule: "fb"
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found

  • Fighting with Submit Button and Return Address / distributing Forms

    I go crazy, too ! We designed some smart forms for a new evaluation process, too, and had a successfully test within our IT collegues. Now we handed the process over to the users, and the problems are on!
    We made sure that everyone uses the same version of Adobe 9.1.2 Pro - but not 2 users do have the same results.
    We found following 2 major issues:
    1) When opening the _distributed.pdf - users either completly missing the pink bar with  Highlight fields / Submit Form
    or, very odd, just the Submit Form button
    2) For those who fortunatly have the Submit Button, another odd thing happens:
    The Send form correctly shows the to: address .....
    Our Desktop Email Application is Notes...
    Guess what .... Now the Email adress changes to [email protected]   ( this worked fine in our testings before...)
    Do you have any clue from where this address is pulled ???? We checked the identitity Info in the Adobe installation at the users computers, the email and name entries are correct there.....
    Please help !!!

    I am pretty sure the answer is in the script. I have put together pieces of script from other suggestions and I am pretty sure I have ascrewed something up  along teh way. I have looked at the attached link and that is where I got some of the script you see below. I am sure you will refer to me as the hatchet person who chopped the script up. sorry. (It is in the Mouse Up) This does work, sort of...It will give the user the message that the required fields are not filed in if they are blank, but it will send the email, but without the custom message in the subject line.
    if (employeename.rawValue != null || employeename.rawValue != "") {
    vSubject  = "Form completed by " + employeename.rawValue;
    vBody = "The form has been sent by " + employeename.rawValue;
    if  (completedate.rawValue != null || completedate.rawValue != "") {
    vBody   = vBody + " on " + completedate.rawValue;
    if  (EmployeeID.rawValue != null || EmployeeID.rawValue != "") {
    vBody = vBody + " Your ID is: " + EmployeeName.rawValue;
    var oDoc = event.target;
    oDoc.mailDoc({
         bUI: false, 
         cTo: "[email protected]",     cSubject: "Statement from " + EmployeeName.rawValue + "

  • Extending EP6 with own Servlet and URL /irj/MyServlet

    Hello,
    I am working on a migration of a Servlet from IBM WebSphere Portal 5.0 to SAP EP6.0. The Servlet is an extension to the Portal and is manually deployd and not with an ear or war file.
    Is it possible to extend the portal with my own servlet accessible with "/irj/MyServlet"?
    I tried to copy the jars to one of the directories
    server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\lib
    server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\lib
    server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\system\lib
    and added my Servlet to the web deployment descripter
    server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\web.xml
         <servlet>
              <servlet-name>MyServlet</servlet-name>
              <display-name>MyServlet</display-name>
              <servlet-class>com.mycompany.MyServlet</servlet-class>
              <init-param>
                   <param-name>ServletMode</param-name>
                   <param-value>normal</param-value>
              </init-param>
            <load-on-startup>1</load-on-startup>
         </servlet>
          <servlet-mapping>
             <servlet-name>MyServlet</servlet-name>
             <url-pattern>/MyServlet/*</url-pattern>
          </servlet-mapping>
    I also tried to modify the jar file in the same manner
    server0\apps\sap.com\irj\servlet_jsp\irj\epbc.war
    All this does not work.
    Does somebody has experience with extending the SAP EP6 portal?
    Greetings, Bernd.

    Maybe its  possible, but it is not recommended to do so.
    However it does not make to much sense.
    Just run your servlet as a portal compoent with an entry as native-Servlet in the pc descriptor.
    Thats a 5 minute trip.

  • Problem with Apple Mail and comcast addresses

    Sometimes Apple Mail will not let me send to comcast.net addresses, including my own.  I get the message: "Cannot send message using the server smtp.comcast.net:[my e-mail address] All other e-mails sends and receives fine. I'm using 10.6.7. What to do?

    Thanks, R.  Actually, in the current instance, I realized the message would not send simply because it was addressed to an invalid address - I corrected the address and it went out fine, but I wish the program would have told me that was the problem instead of sending me on a wild goose chase about possible server or account setting problems. 
    I'm still not sure whether this was the case the previous time I had the problem, a day or so, when I was sending a message to multiple addresses (25 or so). There is little way for me to know which of those addresses is or may be invalid.

  • Sync with both Outlook and iCal / Address book

    Hi,
    I had an Exchange account, the contacts and the calendar was syncronized with my iPhone.
    The Exchange account was deleted, so does my outlook client (actually, it was in my old company notebook what I had to give it back ...).
    The conatct and calender entries are still in my iPhone, actually I need those very much.
    But - if i delete the Exchange account from the iPhone, it will delete all the contacts and calendar entries - no option to merge to an other source. If I leave it as is - I can not save/ sync or edit these entries in my mac, because they are not synchronised any more ...
    Do anyone has any idea how to save this entries to my mac directly, preferably to iCal / address book (without the Exchenge server and without the outlook client)?
    thanx a lot
    koko

    Hi,
    after following a couple of threads and hints about this, I decided to research the issue myself. Posts like http://www.entourage.mvps.org/syncservices/ical.html seems to be out-of-date compared to my Entourage 2008/Leopard 10.5.1 configuration, but the hints provided are translatable to newer configs (with some imagination). No warranties, but this worked for me:
    1. Open Entourage, choose preferences and disable all sync services. (By now, you should have all your events within Entourage Calendar, and being prepared to loose all data i iCal and PDA.)
    2. Open iSync, choose preferences, and reset sync history. Close iSync.
    3. Open iCal, delete the Entourage Calendar. Close iCal.
    4. Navigate to ~Library/Application Support and delete
    a) The folder Calendars and all its contents
    b) All contents of the folder iSync
    c) All contents of the folder SyncServices
    5. Navigate to ~Library/Preferences
    a) Delete com.apple.iCal.plist (if you find any other iCal files, those should probably be deleted as well)
    b) Browse this directory for any files containing iSync or SyncServices. Delete'em all.
    c) Repeat this excercise for the ByHost subdirectory.
    6. Restart Entourage, choose preferences and switch the desired sync services on.
    7. Restart iCal, and watch the Entourage calendar reappear (could take a minute or two).
    8. Restart iSync, and synchronize your PDA. If the sync process asks to add another Entourage calendar to iCal, approve this. This happened to me, but no events ever made it to this calendar, and I was able to delete it from iCal directly following the sync. It hasn't reappeared.
    Note: These hints are for calendar sync, and provided you have all events in the Entourage Calendar. I chose to empty iCal and PDA for the first sync, and to overwrite them with the information from Entourage.
    Harald

  • How to create the default empty work book with company logo and address????

    Hi Guru's
    I am working in ECC5.0 (BW 3.5), i wann create the default empty work book with company logo and company address. so when i am executing any query's that should open in the default empty work book.
    greatly appreciated your help. will assign pt's for sure.
    thanks and regards
    Mohan

    Hi Mohan,
      Report designer is used in BI 7.It is a seperate application used for formatting
    the report.
    For BW3.5,go through this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/33/746e393cf65c1ae10000000a114084/frameset.htm
    This would help you
    Regards,
    Senoy

  • Own fonts and links

    I want to make an "open submenu on click" menu with use of
    own fonts. With sifr3 I managed to get normal headlines and also
    links as own fonts, but I it seems tricky with links and especially
    with the submenu.. look at that:
    Menu
    with own fonts and
    Menu
    without own fonts.. Someown has tips how to do ? or tutorial
    tips?

    Thank you Tom, suspected as much.
    I'm thinking of doing my master (MPEG-2 or H264) with Compressor, then moving the project to Adobe Encore CS6.  Is that something that might sound logical to you?  As what might be best out there in software for doing something like this?

  • HT204053 I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and

    I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?

    Heya Katie!!
    So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
    But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
    When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
    Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
    And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!!

Maybe you are looking for