Zoom button in toolbar

Hi
Zoom does not work. Report shrinks but the text size does not change.
Please give me solution.
Thank you

Hello again Swetha,
I created a simple web application that previews a report using VS 2008 and CR Basic for VS 2008, the bundled edition that ships with VS 2008. I changed the Zoom in the Crystal Reports Viewer control to 25% after running the application. The report, and all it's contents shrunk as expected - the size of the page shrunk, and all the text and objects shrunk as well.
I also previewed the report in the embedded Crystal Reports designer in the VS 2008 IDE - by clicking on the Main Report Preview tab for the Crystal Report. The Zoom button worked as expected here as well. The size of the page shrunk, as did the objects on the report.
In both cases the Group Tree was uneffected. The Group Tree remained at full size. This is expected behavior since it is designed to be a navigation aid and is not part of the report presentation.
You did not clarify where you're seeing this issue - at runtime, or in the VS IDE when previewing the report.
Have you applied any Microsoft or Crystal Reports service packs or patches to your VS 2008/CR 2008 Basic system for Visual Studios or CR 2008 Basic?
Sincerely,
Dan Kelleher

Similar Messages

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

Cannot keep print button on toolbar

Since upgrading firefox I cannot keep the print button the toolbar. I can open customize and pull the print icon button onto the toolbar but it is not there when I open a new session. Ii have to drag it again. How can I keep it in place. This just happens on one desktop. I run another desktop and a laptop without this problem
Thanks

Print the report where? On what printer? The server's printer?
Java code runs on the server. You can't affect the client's computer from JSP.
You can write javascript code which can call window.print() but that is working through the browser to display the print dialog box (as if the user selected file:print)

Button on toolbar after executing the report i.e. after result display

Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
I tried in following manner:
SELECTION-SCREEN: FUNCTION KEY 1.
*INITIALIZATION.
TABLES: SSCRFIELDS.
*MOVE icon_mail TO sscrfields-functxt_01.
*form SEND_EMAIL .
IF sy-ucomm = 'FC01'.
     PERFORM SEND_MAIL_ASSET_STATUS.
ENDIF.
But it's not ok.The above way is not working.
Please note: I want button on toolbar only after executing the report i.e. after result display.
How can I do this?
Kindly guide.
Best regards.

hi
if you are using alv than just pass 3 values to function call
     I_CALLBACK_PROGRAM                = SY-REPID   " program name
     I_CALLBACK_PF_STATUS_SET          = 'STATUS' "PF-STATUS
     I_CALLBACK_USER_COMMAND           = 'UCOMMAND' " subroutine name
and check the value of UCOMM in subroutine

Why is the zoom button grayed out when I scan

Operating system: Windows 7
Software: Adobe Elements CS2
Scanner Cannon 9000f
When I scan a single image the zoom button is grayed out, but when I scan multiple images it is activated. How do I activate it for a single scan. I have selected the item to complete the scan and it is still grayed out.
Thanks for your help. Jim

The person has to have an apple device and also has to be registered with iMessage, otherwise of you try to message them their name will turn red with a ! Next to the name saying they are not a registered use of iMessage.
If your clicking on the name and typing in the box that pops up, you may be typing in the "subject" area. The iMessage has two sections to type in, the subject and content are. The bottom portion is the content area so if you have a message already started then use this area.
The "subject" portion can be turned off also in Settings, messages
It gives the option to turn off the subject portion here

Xr2 v3-p remote where is the zoom button tv picture is to large for the screen

I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.

themamalama wrote:
I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.
For your Cisco/Scientific-Atlanta brannded DVR, it sounds like the user settings may need to be adjusted.
To access the user settings, turn OFF your set-top box; it will remain in standby mode.
Press (Guide) on your remote while the set-top box is in standby mode. OR press Channel Up + Channel Down simultaneously on the front panel of the set-top box.
Scroll to TV TYPE and choose the appropriate setting for the TV: 4:3 Letterbox, 4:3 PAN/SCAN or 16:9 widescreen
Scroll to HDMI/YPbPr OUTPUT and change it to either 480p std, 480i std, Pass Thru or 1080i
Scroll to 4:3 OVERRIDE and select 480p

Safari windows don't fill up screen when zoom button is clicked

Hello, when I use the MacMini I have at work and click the zoom button on a Safari window if fills up the screen, except for the dock, but when I do that on my iMac at home it shrinks and moves the window to the lower left corner below the display edge. If there were a way to attach grab shots I could post it on here. Any idea what would be causing this? Thanks!!

HI,
There isn't any full screen mode for Safari alone, you would need to download and install Glims so you can enable the Full Screen Mode and it works like a charm.
Go here: http://www.machangout.com/
"Adds full-screen browsing capability"
Carolyn

Which trigger fires after pressing 'Save' button on toolbar.

hi,
I wanted to know which triggers get fired after pressing 'save' button on toolbar, and in which sequence it get's fired.

When you press 'save' it tries to do a commit_form.
Before commiting the form, it checks for any errors which might occur at form level, block level or item level and does the commit only when it doesn't find one.

Share button on Toolbar when clicked takes time to load ? Do you get that ?

Share button on Toolbar when clicked takes time to load ? Do you get that ?

After activating your iPad, go to the App Store and search for your free apps:
1. Pages
2. Numbers
3. Keynote
4. iPhoto
5. iMovie
6. GarageBand
If apps are still showing the price: sign out>reboot>and sign in again
Settings>iTunes and App Store>Apple ID

IPM EBS integration - zoom button is not opening window

Hi,
We have done the integration between EBS and IPM. It was working fine till the point we changed the IPM schema name.
Initially we did the integration with IPM schema DEV_IPM and done all the changes it was working fine.
For doing the UAT we created the schema UAT_IPM and done the new domain setup with IPM pointing to UAT_IPM. In standalone IPM is working fine. However since this point we are not able open the IPM window from Zoom button.
What are the changes do we need to do in AXF tables after this? i am sure there should be some setting with AXF_properties table only. but not able to figure out WHAT ?????
Please help.
Regards,
Vikrant Korde

This got resolved.

Close, Minimize, and Zoom Buttons

Where are the resources (Graphics) for the Close, Minimize, and Zoom buttons located?

They appear to be in the /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/Resources/AquaUI. bundle/Contents/Resources/ folder, which can be navigated to with the Finder's Go to Folder command in the Go menu. They may also be in the LeopardUI.bundle folder, with the rest of the path identical.
(32859)

Green zoom button behavior

I've been wondering if my green zoom button on a window does what it's supposed to. When I click on it sometimes the window gets smaller and pushed to the lower left corner of the display with half of it not visible below the dock. Should it not get larger with the scroll bars going away or maybe filling up the desktop? Does it do the same thing for everyone out there??? Thanks!

HI,
Try Right Zoom for Mac 1.63 - freeware (language: English)
Carolyn

Green Zoom Button No Longer Works

When I click the green zoom button for a quicktime video, the window no longer zooms. Is there a way to remedy this? I already installed and reinstalled.

the latest version of quicktimw is horrible. i cant believe had bad it is. the green button doesn't work, audio cuts out after playing the movie until i reduce the window into the dock and then reopen it and audio cuts out. if these problems aren't fixed for leopard it will be shameful. thanks God for VLC.

Preview zoom button doesn't respect dock location?

When I open a PDF document (perhaps others, too) in Preview and zoom in, then press the zoom button (aka enlarge, the green button on the top left of the window), the window seems to zoom to a size which leaves room for the dock at the bottom ... but I have my dock set to the right. This means I go through the same 4-clicks-and-a-drag motions every time I open a PDF: not life-threatening, but very much a drag.
I understand I can tweak so that I get the zoom level I want by modifying preferences in the plist, but is there any way to get the application to respect my choice of dock placement? I would be willing to write a script, if necessary, but this seems like it should be default behavior (after all, I am given the choice of dock location, and this should be accessible from any app which is leaving room for the dock).
Thanks in advance for any help!
-- Fritz

All I can suggest is to send bug reports and enhancement requests to Apple via its Bug Reporter system. Go to https://connect.apple.com/MemberSite and join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Then, go to https://bugreport.apple.com/, click on the Login to the Apple BugReporter link (using your Apple ID username and password), and file your bug report/enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Zoom button in toolbar

Similar Messages

Maybe you are looking for