Zoom into a specific point on a clip

How do I zoom to a specific point on a clip or picture?
Whenever I try to use this feature it just goes to the centre of the clip.
Thank-you.

Make sure Image + Wireframe is selected in the Canvas:
Select the clip you want to zoom in on and reposition on the timeline by clicking on it. Once it is selected on the timeline, the turquoise box and cross hairs should appear in the canvas.
If you click and drag on one of the boxes on the corner, you can resize your image:
And if you click and drag on the image itself, you can change the clips position:
You may need to change the canvas display scale to see the handles after you zoom in:
MtD

Similar Messages

Jumping to a specific point in a clip

How can I jump to a specific point/frame in a clip? Example: I know a clip is exactly 3:40 long. How could I go to 3:37?
Thanks.

If you have the clip loaded in the Viewer window and the Viewer window highlighted, it will take you to that point in the clip, if you have the Timeline highlighted, it will take you to that point in the Timeline. You can also save a few keystrokes by just hitting "3.37." to skip to 3 minutes and 37 seconds, for example.
-Zap

How to have 2DGraphics zoom into a specific part of an image?

I am trying to mess around with2DGraphics and affinetramsform to zoom into a section of an image but i have no luck doing it. Can someone help me out? Lets say I want to zoom into the coordinates (200,300) and (400,600) . I know DrawImage has a method that does this but does 2DGraphics have it too or affinetransform? I havent see anything like it yet. thanks

import java.awt.*;
import java.awt.event.*;
import java.awt.geom.AffineTransform;
import java.awt.image.BufferedImage;
import java.io.*;
import javax.imageio.ImageIO;
import javax.swing.*;
import javax.swing.event.*;
public class ZoomIt extends JPanel {
    BufferedImage image;
    Dimension size;
    Rectangle clip;
    AffineTransform at = new AffineTransform();
    public ZoomIt(BufferedImage image) {
        this.image = image;
        size = new Dimension(image.getWidth(), image.getHeight());
        clip = new Rectangle(100,100,200,200);
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        g2.drawRenderedImage(image, at);
        g2.setColor(Color.red);
        g2.draw(clip);
        //g2.setPaint(Color.blue);
        //g2.draw(at.createTransformedShape(clip));
    public Dimension getPreferredSize() {
        return size;
    private void zoomToClip() {
        // Viewport size.
        Dimension viewSize = ((JViewport)getParent()).getExtentSize();
        // Component dimensions.
        int w = getWidth();
        int h = getHeight();
        // Scale the clip to fit the viewport.
        double xScale = (double)viewSize.width/clip.width;
        double yScale = (double)viewSize.height/clip.height;
        double scale = Math.min(xScale, yScale);
        at.setToScale(scale, scale);
        size.width = (int)(scale*size.width);
        size.height = (int)(scale*size.height);
        revalidate();
    private void reset() {
        at.setToIdentity();
        size.setSize(image.getWidth(), image.getHeight());
        revalidate();
    private JPanel getControlPanel() {
        JPanel panel = new JPanel(new GridBagLayout());
        GridBagConstraints gbc = new GridBagConstraints();
        gbc.weightx = 1.0;
        gbc.fill = GridBagConstraints.HORIZONTAL;
        gbc.gridwidth = GridBagConstraints.REMAINDER;
        panel.add(getZoomControls(), gbc);
        panel.add(getClipControls(), gbc);
        return panel;
    private JPanel getZoomControls() {
        final JButton zoom = new JButton("zoom");
        final JButton reset = new JButton("reset");
        ActionListener al = new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                JButton button = (JButton)e.getSource();
                if(button == zoom)
                    zoomToClip();
                if(button == reset)
                    reset();
                repaint();
        zoom.addActionListener(al);
        reset.addActionListener(al);
        JPanel panel = new JPanel();
        panel.add(zoom);
        panel.add(reset);
        return panel;
    private JPanel getClipControls() {
        int w = size.width;
        int h = size.height;
        SpinnerNumberModel xModel = new SpinnerNumberModel(100, 0, w/2, 1);
        final JSpinner xSpinner = new JSpinner(xModel);
        SpinnerNumberModel yModel = new SpinnerNumberModel(100, 0, h/2, 1);
        final JSpinner ySpinner = new JSpinner(yModel);
        SpinnerNumberModel wModel = new SpinnerNumberModel(200, 0, w, 1);
        final JSpinner wSpinner = new JSpinner(wModel);
        SpinnerNumberModel hModel = new SpinnerNumberModel(200, 0, h, 1);
        final JSpinner hSpinner = new JSpinner(hModel);
        ChangeListener cl = new ChangeListener() {
            public void stateChanged(ChangeEvent e) {
                JSpinner spinner = (JSpinner)e.getSource();
                int value = ((Integer)spinner.getValue()).intValue();
                if(spinner == xSpinner)
                    clip.x = value;
                if(spinner == ySpinner)
                    clip.y = value;
                if(spinner == wSpinner)
                    clip.width = value;
                if(spinner == hSpinner)
                    clip.height = value;
                repaint();
        JPanel panel = new JPanel(new GridBagLayout());
        GridBagConstraints gbc = new GridBagConstraints();
        gbc.insets = new Insets(2,2,2,2);
        gbc.weightx = 1.0;
        addComponents(new JLabel("x"),      xSpinner, panel, gbc, cl);
        addComponents(new JLabel("y"),      ySpinner, panel, gbc, cl);
        addComponents(new JLabel("width"), wSpinner, panel, gbc, cl);
        addComponents(new JLabel("height"), hSpinner, panel, gbc, cl);
        return panel;
    private void addComponents(Component c1, JSpinner s, Container c,
                               GridBagConstraints gbc, ChangeListener cl) {
        gbc.anchor = GridBagConstraints.EAST;
        c.add(c1, gbc);
        gbc.anchor = GridBagConstraints.WEST;
        c.add(s, gbc);
        s.addChangeListener(cl);
    public static void main(String[] args) throws IOException {
        String path = "images/owls.jpg";
        BufferedImage image = ImageIO.read(new File(path));
        ZoomIt test = new ZoomIt(image);
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JScrollPane(test));
        f.getContentPane().add(test.getControlPanel(), "Last");
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}

How to zoom into a specific part of an image?

I am trying to mess around with2DGraphics and affinetramsform to zoom into a section of an image but i have no luck doing it. Can someone help me out? Lets say I want to zoom into the coordinates (200,300) and (400,600) . I know DrawImage has a method that does this but does 2DGraphics have it too or affinetransform? I havent see anything like it yet. thanks

you could check this
http://www.javareference.com/jrexamples/viewexample.jsp?id=84
it may help you

How do I zoom to a specific point on a page

My first question ever to support:
WIndows 7 - Firefox 32.0.2 - Laptop without touch screen or touch pad (mouse and keyboard only)
I have found lots of ways to Zoom on a page. However, zoom always anchors to the top left. I would really love to zoom to the position of the mouse pointer. Usually I am focused on a specific piece of the content and not the whole page.
Is this possible? Thanks everyone.

hello, i don't think that this is possible currently (or that there are any addons that would provide this functionality).
however, it sounds like a nifty feature though when you use the gestures involving the mouse to zoom - you might want to file an enhancement bug at bugzilla.mozilla.org about that...

How do I move video clips to specific points on a music track in iMovie?

I am trying to make a lip synch video and need to move my video clips to specific points on a musci track so that the words are in time with people singing - does anyone know how to do this? At the moment, I only seem able to put the clips in one after the other...

Hi
IMovie is Video clip oriented - meaning that Audio can not be put in first and video/photos added later.
So to do this I use black photos that I fill up the Video with first
Then Add audio
Then add Video/photos by Cutaway function or exact replacement (in time).
This is so much easier in any version of FINALCUT where one can build Audio first then create the video ontop of this.
Yours Bengt W

New problem/bug when I set in and out points on a clip. Unwanted automatic zoom in on clip timeline.

Playing clips to log and set in and out points for scenes I will use later. Something changed with the new update and I think it is a bug. When I hit the I and O keys to set in and out points on a clip before dragging to the sequence, it zooms in on the clip timeline. I cannot see the full clip time line unless I zoom out which is a pain to do time and time again. How do I get it back to the way it was before? It did not used to zoom in and out, it just marked your in and out point as it played leaving the clip timeline unchanged.
I am using windows 7 with Premiere Pro CC

Hi,
Thanks for your post. I think you are using Premiere pro CS6 as the Project option is included in the file menu and in the video there is an option of project available and visible. Please update your CS6 with the latest 6.0.5 update and the issue will be fixed. The link is provided below. Please update once issue is fixed.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5631
Regards,
Vinay

Is it possible to hyperlink to a specific point in a video?

I'm trying to create a DVD-style menu page within keynote.
Ideally what I'd like to do is have a video on 1 slide and then create a series of hyperlinks on a menu slide that would hyperlink to specific points within that video.
Anyone know if this is possible?

You could use iMovie to split the video clip into each section as well. Do you need the option to play the entire video clip from start to finish? If not, you can have each video clip be its own Keynote file and have Hyperlinks to each individual Keynote and then there will not be one large file, but multiple smaller files. This of course will not work if you want to play the movie straight though.

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

How to find all those list of SAP standard and custom objects that are changed from a specific point of time

Hi all,
Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
Is there any function module or any table where this change log is maintained.?
I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
Thanks in advance

Hi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar

How do you set the in point of a clip?

I'm using the timeline template that has a number of clips flying by and I need to adjust the in point of the clips. To be clear, I'm NOT trying to adjust the point that the clip appears in the timeline but instead the portion of the clip that will be displayed as it fly's by within the Motion timeline.

All that that seems to do is set the in point of the clip on the Motion timeline. Again, what I am attempting to do is change what is seen on the particular clip that has been dropped into this template. Where the inset clip window appears on the timeline is fine but I want is a later portion of the video within that clip to be shown as it is flying by. As it is now the clip is just beginning to show the footage I want as it is flying out of view.

Logging into a specific server in a terminal server farm

We have several terminal server farms and in each farm we have the need for 1 user to always log into a specific server in the farm. This is due to a little piece of sortware that is required for a device that only this one user has and
the fact the it is licensed to only one server. The user must use that server for it to work. I want to include this server in the farm because it seems silly to have a server for only one user. How can I point one PC/user
to the same server in the farm all the time? We are using the Connection Broker and NLB which seems to work just fine for all other users.
Thanks

Hi Steve,
What operating system version are you running on your servers? Server 2008 R2? Server 2012?
When you configure a RDS farm to be load-balanced by the connection broker, all servers in the unique farm are intended to have the exact same applications installed. The idea is the RDCB can redirect users to different servers as needed to balance
the load, and that you may take any particular server (or servers, if you have enough) offline and your farm will still work.
Now, there are always exceptions and I understand it would be nice if you could assign a user/app to a specific server to handle a case like yours. For example, you would understand this particular user or app would not be load-balanced or highly
available and if the one server was down it would not work, but other users/RemoteApps would be load-balanced as usual. This is
not a feature of the current versions of RDS.
To do what you want the "best way" would require writing a custom plugin for RDCB. In your custom plugin you would specifiy the load-balancing logic. For example, when one of the "special" users logs on, your logic would direct them to the
correct specific server, but when a regular user logs on you would allow the normal RDCB load-balancing logic to apply. Please see here for more information:
Terminal Services Session Broker Plug-in reference
http://msdn.microsoft.com/en-us/library/windows/desktop/cc644962(v=vs.85).aspx
Besides writing a custom plugin I suggest you consider the following workarounds:
1. Instead of running the app under RDSH, run it in a Win7/Win8 VM pool if possible. Either a pool of identical VMs or assign each user that needs to run the app to a dedicated VM. Downside of this is added complexity, licensing for VDI,
and an increase in hardware resources required to run the VMs.
2. Have the user connect to the server using /admin. You can change the permissions so that a specific group may connect using a /admin connection, without them being administrators. Downside of this is that some features
of RDSH are not present when connected as an administrative RDP session, and only two Active admin sessions are permitted.
3. If running Server 2008 R2 you could set the server so that it does not participate in load balancing and have the users that need to run this special app connect directly to the server's ip address instead of to the farm name. Downside of this
is that you will get more uneven load distribution, however, it may not be that bad if you are balancing your initial connections using NLB and you have all of your regular users connecting to the farm name as usual.
4. Have a separate server in each farm (not joined to the farm) just for this one app. If possible they could be VMs with not much resources dedicated to each. I know this is what you did not want to do, but I mention it because an
extra base Windows Server license, one for each farm, is likely less additional cost than licensing the special software on
all servers. If you can run the app in VMs then the additional hardware cost of doing it this way is reduced.
-TP

Zoom into a letter (Motion 3)

Hi there,
I have a white screen with black text on it. I am attempting to transition to a black screen by zooming all the way into a black letter. Is it possible to set a zoom point and let motion take care of the rest? Or will I have to keyframe this manually? When I attempt to keyframe this animation, I reach a point where I just can't zoom into the letter anymore. Does anyone have any advice for me? It would be greatly appreciated.

umm...what do you mean by white borders? you tried what mark said with the camera?
or
change your group to 3d, arrange the anchor point of the group to where you want it to zoom to, then move the group's position on it's z axis.
or if the group is 2d, place the anchor point of the group to where you want it to scale to and scale the group...

Setting an out point on a clip

When setting an in point on a clip and you hit "+" it appears as if you can advance the cursor to a specific time when you type in a value, but I can't seem to make it work. Does anyone know how?

hmmm, in the event bowser it does not work for me either, hitting the minus key moves the out point back, but hitting the plus key appears not to move either the CTI or either the in or out points.
A work around that uses the same idea and number of keystrokes.
Set an in point and then using the ctrl d function set the duration this allows you to create a clip of an exact duration.
HTH
Tony

Can you zoom into a ibook image?

Hi, is it possible to zoom into an image that is already full screen -- so that you can check out details in the photo?
It seems to expand up with my fingers on my iPad, however, as soon as I let go of the image, it returns to full size,
so I am not able to zoom in on parts of the image. Is there a way to create images that appear in my ibook that are zoomable?
Thanks,
jkropp

The OP stated that "if I drop my image into a widget, like gallery, I still can't get the image to zoom up...."
As far as I know, gallery images are allowed to be larger precisely so that zooming in is possible without loss of quality.
....so what is your point about telling the OP that he isn't using a widget, when the OP explicitly stated that he is?
Michi.

Zoom into a specific point on a clip

Similar Messages

Maybe you are looking for