10.5.2 - cannot print with Samsung CLP-510 connected via Airport

After 10.5.2 Leopard upgrade, the printer Samsung CLP-510 prints only if it's connected directly to my MacBook (or my PowerBook), not if it's connected via Airport (Extreme): the printers become soon busy and give the message "Device busy, please retry...", and after some time the printer print an error page with "timeout" error.
No luck resetting the Airport.
Any workaround, please?
Thanks in advance
Salvo

These steps may help:
1. Open System Preferences and click on the "Print & Fax" icon
2. Click on the "+" button to add a printer
3. Click on the "IP" button in the toolbar
4. Choose "HP Jetdirect - Socket" from the "Protocol" option menu
5. Enter the hostname or IP of the Airport base station in the "Address" field - typically 10.0.0.1 or your base station name with ".local" on the end
6. Leave the "Queue" field blank
7. Replace the auto-generated name with something meaningful to you in the "Name" field
8. Choose "Select a driver to use" from the "Print Using" option menu, and then type in the model number for your printer to locate the corresponding printer driver
9. Click "Add" to add the printer, then try printing
If you report back with your results, it would be appreciated.

Similar Messages

Cannot print with a windows 7 connected printer

Mac Book Pro 13'' Mac OS 10.6.4, windows 7 hosting a Deskjet F370 (F300 series) and there is NO WAY i can print from the mac to the windws connected printer.
1- Printing sharing enabled,
2- LPD & LPR protocols enabled,
3- homegroup disabled,
4- file sharing works via SMB like a charm,
5- password protected sharing disabled.
I think i'm not forgetting anything. When I try to add the printer in my mac -
Sys pref > Print&fax > add > advanced > method 1: LPD/LPR > lpd://IP/ShareName
method 2: Windows > smb:// > I always select the driver F300 from the list (no gutenprint available). Finally the printer is added to the list after a long wait, but it doesn't work in any way. Please......help, thanks!
Marcos

Hi
I install the three packages in the website you provided and tried again with the new driver, i still cannot print.
Somehow i found two print jobs in the Window's queue, couldn't print them, i thought they belonged to the new driver session, but since i coulnd't get to add new jobs in the queue again i don't know anymore, In the mac i've tried it as a registered user and guest, no difference, it asks for password, i provided it and it keeps waiting for authentication (On hold, authentication required), i even removed the password from my administrator account in windows and nothing.
if i go to job info in the mac it tells me among other things:
Status: On Hold (Authentication required)
Job message: Session setup failed: NTSTATUS_INVALIDPARAMETER
Don't know what to do.
M.

Cannot Print with Acrobat Standard X

One of my clients is running ACROBAT X Standard on Windowes 7 64-bit.. She cannot print any PDF using Acrobat to any printer. Print jobs never reach the queue. As a work around she muct convert to Word.
Printing as image does not help.
Saving a copy does not help.
I have applied al updates, repaired and completely removed and re-installed the product but nothing helps.
Also, the Printer Properties button and Page Setup buttons do not work. They are not disabled (greyed out), they just don't launch these functions.
I appreciate any help!
Charlie O
Plexus IT

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Cannot print with Reader XI

I cannot print with Reader XI. It keeps telling me I have not marked any pages to print even though I have. I finally had to uninstall Reader XI and open the pdf file through Google Chrome. What's the point to having Adobe Reader at all?

Hi Robert,
Please try the solutions mentioned below -
Solution 1 :-
Repair Adobe Reader, Help (Menu) -> Repair Installation.
Solution 2 :-
Try to print as Image, Quick fix | Print PDF as image | Acrobat, Reader
Solution 3 :-
Update the printer driver, please refer to this KB doc. for the troubleshooting steps Troubleshoot PDF printing | Acrobat, Reader
Let me know if the issue persist.
Regards,
Aadesh

I have Mavericks installed. Cannot print with IPhoto because there are no themes

I cannot print with IPhoto because it says that I do not have themes. How do I install themes? JL

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Cannot print with Cannon LBP5000 and Timecapsule

So I've read that the Cannon LBP5000 is not compatible after all with Time Capsule. Due to the CAPT Driver being bi-directional. I do not accept this as a resolution and feel that Apple cannot simply push this aside. My reason for that is this.
I was printing fine, with both my MBP and Air via a USB cable to my Cannon LBP5000 - great.
I then decided to go wireless printing. And bought a HP 2101nw print server for £30. I could then print wirelessly - fab!
I then decided to upgrade my MBP to Lion. I then could no longer print on that machine. Air still fine - pants.
I then had to (for other support reasons) upgrade my Air to Lion, to fix something else. I could no longer print from their either - bugger.
After much passing of bucks and research, I found out the HP 2101nw driver is not Lion compatible, nor do Apple or HP have any intention of fixing that. I was told to discard that wireless print server for something compatible with Lion - cheers.
I then bought a 2TB TimeCapsule. And found I couldnt print from that either for the lame reason I quoted at the start.
If this print worked wirelessley with a £30 print server on Snow Lepoard, why is it acceptable for it to not work on a £249 device. The printer hasnt changed, but it seemed a £30 solution is able to handle this 'Bi-Directional' impediment where the mighty TimeCapsule gives up.
What a load of tosh - really, really unimpressed Apple. Take ownership and responsiblity for something for once and fix the exceptionally painful transistion you pushed us through with Lion.

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Cannot print with hp 2600n through network

I installed Leopard on my two month old Imac(latest model) with no real glitches and thought all was fine until I tried printing with my HP color laserjet 2600n through my network.
I get my network showing up as guest sharing(not logging me in under my name) and even though I could print fine with Tiger, I cannot print with Leopard. The request shows up in the print queue but does not print.
Any advice would be appreciated. I was never prompted before for a password everytime I printed and was always logged in to my network and not a guest sharing before. I know I'm missing something here but everything else transferred over fine from Tiger but the printer is a mystery.
Thank you for any help,
Nathan
Message was edited by: nlsdds

Try resetting the base station that your printer USB is plugged into.
Worked for me with an Airport express
http://docs.info.apple.com/article.html?artnum=107418

Cannot print with the new OSX with my canon mp550 printer

I cannot print with the new OSX with my canon mp550 printer , it sais there is no available driver ..!! what to do ..?? does anyone have a solution ..??

OS X Mavericks: Reset the printing system

Cannot print with all-in-one

I cannot print with my all-in-one because I have a print-job in th queue, and when I attempt to cancel it , it simply will not cancel, but remains in the queue. I think this happened when I was printing from the internet and a nearby lightning stike disrupted the printing.

Have you tried to shut down the computer and printer and then turning them on again??

Samsung CLP 510 and OS Tiger Classic

My Samsung CLP 510 usb printer just prints fine in OS Tiger with the driver provided by Samsung. However when i try a printout in classic, it does not work. The printer is connected via usb. The chooser option with the laserwriter 8 does not work. If i try to print there is the message, that the printer is not available. The desktop printer utility in classic does not find the CLP as an usb device.
So i tried the LPD option with the TCP adress from my mac and the printer queue name provided by OS Tiger. If i try to print there is the following error message: error -8873 printer is busy or switched off.
Powermac G5 dual 2.0 Mac OS X (10.4.9)

Thanks Greg,
finally I found out what is going wrong. The firewall in os x tiger should be configured with active printer sharing. The print monitor for classic should be deactivated.
The desktop printer utlility is not able to recognize some usb printers. So I decided to configure it as LPD Printer with the adress of my G5. The printer queue should be the exact name as in OS Tiger. So I created two desktop printers, one for the Samsung CLP, the other one for my HP Laserjet 3015. All print jobs are now transfered to the Cups OS X drivers. Works like a charm.

HT3669 driver for Samsung CLP-510 for osx 10.8 ??

Iam looking for a driver for Samsung CLP-510 for osx 10.8 ?? Samsung dosnt offer one and it dosnt appear at this list? Has anybody some ideas?? Thanks!

Go to Samsung, download driver version 10.6 and then open file in Finder. Before clicking file hold control key this will override the warning and then it will install the drivers. After this go to preferences then printers install printer and the drivers are loaded in. I used this for OS 10.8 and now 10.9
Good luck

Samsung CLP-510 driver for the Classic enviroment?"

Is ther a way to print from the classic enviroment to a Samsung CLP-510. The current driver does not appear to support the classic enviroment.

Hello 3rd,
First of all, welcome to the Apple discussions.
As you can see in my computer specimens that I'm using a CLP 510 myself.
By my knowledge this is not supported, the only thing you can try is a driver from Gimp Gimp driver
But I'm not sure if this is working.
Let me know if so ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~))

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

On a certain website, it says to click here to download plugin (Java). When executing the download, it says 'the installer cannot proceed with the current Internet Connection settings. I'm running 4.01. It was fine before the upgrade.

On a certain website, it says to click here to download plugin Java Runtime Environment. I receive the message installer cannot proceed with the current Internet Connection settings. It was fine before the upgrade to 4.01. I have another PC that has IE on it and it works fine and again it worked fine until the upgrade to 4.01. I've done the off-line download but in Firefox it still says I need the plugin and still results in the installer cannot proceed with the current Internet Connection settings.

You can install Java from here: http://www.java.com/en/ 
You also need to update your Flash installation since the one you have at the moment exposes your system to attack. It's a similar story for Adobe Reader.
See: 
* http://www.adobe.com/support/security/bulletins/apsb11-12.html 
* http://www.adobe.com/support/security/bulletins/apsb11-08.html 
Download from here: 
* Adobe Flash: http://get.adobe.com/flashplayer/ 
* Adobe Shockwave For Director: http://get.adobe.com/shockwave/ 
* Adobe Reader: http://get.adobe.com/reader/?promoid=BUIGO

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

10.5.2 - cannot print with Samsung CLP-510 connected via Airport

Similar Messages

Maybe you are looking for