3.3 MB of 3.3 MB .... 3.5 MB of 3.5 MB .... etc.
Hi folks. Last night I noticed my regular Time Machine scheduled backup (to a 500 GB Time Capsule, connected via Ethernet) was taking longer than usual. When I peeked in the Time Machine menu, I noticed that the number for 'total amount to be backed up' kept increasing, along with the 'amount backed up so far' number. Like this:
3.3 MB of 3.3 MB ...
3.5 MB of 3.5 MB ...
3.6 MB of 3.6 MB ...
And so on.
At first I left it alone, but this kept happening right up to 10 or so GB, at which point I stopped the backup and turned off Time Machine. Seemed like that was going to go on forever. Seemed weird and I didn't want to see what was going to happen at the end of that process.
I've never seen this behaviour before -- normally that second number stays the same. (0.0 MB of 9.0 MB ... 3.3 MB of 9.0 MB ... 9.0 MB of 9.0 MB ... done.) Isn't that what is ALWAYS supposed to happen?
Should I just let the backup keep going?
Nothing out of the ordinary had happened since the previous scheduled backup; no great amount of files created or anything. I don't run Entourage, Fusion, CS3, Aperture, or any of the known problematic apps.
On my 500 GB Time Capsule disk, the Finder says I have 82.1 GB free. When I enter the Time Machine interface, it says I have 82.07 GB free.
In my attempts to fix the issue so far, I have:
• verified the .sparsebundle backup image using Disk Utility;
• deleted the '.inProgress' file on the Time Capsule disk;
• deleted the folder for the previous full backup (took a while);
• repaired permissions on my startup drive;
• deleted Time Machine preferences file and rebooted;
The weird behaviour keeps happening. I haven't gotten an error message or anything; I always stop the backup before it gets to the end.
Thanks in advance for any help!
Message was edited by: Gord Locke
Gord Locke wrote:
Alright I just let the backup keep going ... took a little longer than usual, but in the end all was well.
I'm paranoid I guess!
Thanks for your help.
You're welcome, and thank you for the !
Similar Messages
-
We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Using SQVI to generate report of open and released delivery schedule lines
All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi. -
Open project cancelled or unable to load database...
I have been running version 9 sucessfully and moving projects around with no errors. Today, I cannot load any of my projects.
I have been through the threads and deleted the .cpj, moved the project to the root of my hard drive, etc.
Something else is going on.
I did see some information on files being blocked by the virus scanner. I'll pursue that with my help desk.
Any other ideas would be appreciated.
Thanks!The only file that is MS Access based is the CPD file and it does not matter which version of Access you have on your machine, indeed you don't have to have Access installed.
If you have the same problems with the supplied sample projects, then maybe something has gone wrong with your installation of RoboHelp. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Open Sales Orders Backlog Report
Hi All: I have been asked to create Backlog reports for Open Sales Orders and the revenue amounts for the next 15days, one month, 2 months, 3 months 6 months etc etc. Does anyone know of a standard report that covers that and the business content and cues that go with it?
Thanks in advance
BobbyI haven't seen any standard content for it, with my client, we actually developed the open order report from Item extractor and status extractor. And compare the created on date to the system data to see how long it has been opened for and put it in different buckets.
Hopes that help.
thanks.
Wond. -
Hi all
We are currently busy finalising our FI-CA BW Data Modeling exercise - and in process to complete Dataflow documentation.
We will make use of the standard open and cleared item extractors with enhancements on different levels. Some background on the requirements:
- We will have to extract document types, divisions, dates, clearing reasons, contract account, Business Partner etc.. information to meet the requirements.
- We will have to keep history for at least 26 months to produce the required management reports (very high number of data), and 'partition' the cubes on date level for both Cleared and Open Items.
- Most of the reports display 13 months worth of billing/ payment figures. I.e. the report for the end of October show billings vs. payments for October 2006, September, August, July, ... to October 2005.
- The requirement is that the report figures will not change from one month to the next (i.e. if I run the report for end of October - all figures from October 2006 to Oct 2005 will remain the same when I run the report for end of November). I.e. if reversals, transfers, returns etc. occur - these will be picked up in later months.
- For the above requirement, we are looking at extracting open (end of month) and cleared items (for the specific monthly interval) on a monthly basis, and appending the data in the cubes. We will then always base the June figure in the report on the June month extraction (LAUFD/ LAUFI fields) and we will pick up any movement in the next month/s - i.e. July.
Has anyone had these types of requirements before - to report on billings vs. payments, and report on history as described above. We would appreciate it if you could share your report requirements, and also design documents, especially the DataFlow documentation that we can look at as input to our design.We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw -
Custom purchase requsitionto vendor open and cleared payment report
dear all i develop report but i cant ableto show in that open amount and cleared amount of vender in that report so please see this report and feedback me for logic to show open and clear amount of vendor purchase orderwise or vendorwise
report zpo_purchase_history no standard page heading message-id 00.
TABLES : bsik, bsak, lfa1, lfb1, skb1, t001, bapifvdexp_vzzbepp.
type-pools:slis,ICON.
types :begin of ty_po,
banfn type eban-banfn,
"Purchase Requisition Number
bnfpo type eban-bnfpo,
"Item Number of Purchase Requisition
ekgrp type eban-ekgrp, "Purchasing Group
badat type eban-badat,
"Requisition (Request) Date
menge type eban-menge,
KNTTP TYPE EBAN-KNTTP,
PSTYP type eban-PSTYP,
"Purchase Requisition Quantity
meins type eban-meins,
"Purchase Requisition Unit of Measure
lifnr type ekko-lifnr, "Vendor Account Number
bedat type ekko-bedat, "Purchasing Document Date
ebeln type ekpo-ebeln,
"Purchasing Document Number
ebelp type ekpo-ebelp,
"Item Number of Purchasing Document
matkl type ekpo-matkl, "Material Group
mtart type ekpo-mtart, "Material Type
matnr type ekpo-matnr, "Material Number
txz01 type ekpo-txz01, "Short Text
menge1 type ekpo-menge, "Purchase Order Quantity
meins1 type ekpo-meins,
"Purchase Order Unit of Measure
balqty type ekpo-menge, "Balance Quantity
netpr type ekpo-netpr,
"Net Price in Purchasing Document
peinh type ekpo-peinh, "Price Unit
mblnr type mseg-mblnr,
"Number of Material Document
zeile type mseg-zeile, "Item in Material Document
menge2 type mseg-menge, "GR Quantity
meins2 type mseg-meins, "GR Unit of Measure
werks type mseg-werks, "Plant
charg type mseg-charg, "Batch
belnr type rbkp-belnr,
"Document Number of an Invoice Document
bldat type ekbe-bldat, "Document Date in Document
belnr_b type rbkp-belnr,
SHKZG type ekbe-SHKZG , "Debit/Credit Indicator
DMBTR type bsik-dmbtr, "Amount in Local Currency
DMBTR_C type bsAk-dmbtr, "Amount in Local Currency
thick(10) type c, "Thickness
width(10) type c, "Width
length(10) type c, "Length
grade(10) type c, "Grade
BELNR_d type bseg-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_po.
types :begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-lifnr,
bedat type ekko-bedat,
end of ty_ekko.
types:begin of ty_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
matnr type ekpo-matnr,
txz01 type ekpo-txz01,
menge type ekpo-menge,
meins type ekpo-meins,
netpr type ekpo-netpr,
peinh type ekpo-peinh,
banfn type ekpo-banfn,
bnfpo type ekpo-bnfpo,
mtart type ekpo-mtart,
end of ty_ekpo.
types :begin of ty_eban,
banfn type eban-banfn,
bnfpo type eban-bnfpo,
matnr type eban-matnr,
menge type eban-menge,
meins type eban-meins,
end of ty_eban.
types : begin of ty_ekbe,
ebeln type ekbe-ebeln,
ebelp type ekbe-ebelp,
belnr type ekbe-belnr,
bldat type ekbe-bldat,
gjahr type ekbe-gjahr,
buzei type ekbe-buzei,
matnr type ekbe-matnr,
DMBTR type ekbe-dmbtr,
shkzg type ekbe-shkzg,
end of ty_ekbe.
types : begin of ty_mseg,
mblnr type mseg-mblnr,
mjahr type mseg-mjahr,
zeile type mseg-zeile,
menge type mseg-menge,
meins type mseg-meins,
ebeln type mseg-ebeln,
ebelp type mseg-ebelp,
matnr type mseg-matnr,
werks type mseg-werks,
charg type mseg-charg,
end of ty_mseg.
types : begin of ty_rbkp,
belnr type rbkp-belnr,
gjahr type rbkp-gjahr,
bldat type rbkp-bldat,
lifnr type rbkp-lifnr,
ZUONR type rbkp-ZUONR,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_rbkp.
types : begin of ty_bseg,
bukrs type bseg-bukrs,
belnr type bseg-belnr,
gjahr type bseg-gjahr,
buzei type bseg-buzei,
valut type bseg-valut,
wrbtr type bseg-wrbtr ,
augbl type bseg-augbl,
matnr type bseg-matnr,
lifnr type bseg-lifnr,
ebeln type bseg-ebeln,
end of ty_bseg.
types : begin of ty_rseg,
belnr type rseg-belnr,
gjahr type rseg-gjahr,
ebeln type rseg-ebeln,
ebelp type rseg-ebelp,
matnr type rseg-matnr,
bukrs type rseg-bukrs,
end of ty_rseg.
types : begin of ty_bsik,
belnr type bsik-belnr,
buzei type bsik-buzei,
DMBTR type bsik-DMBTR,
budat type bsik-budat,
shkzg type bsik-shkzg,
ebeln type bsik-ebeln,
lifnr type bsik-lifnr,
end of ty_bsik.
types : begin of ty_bsak,
belnr type bsak-belnr,
lifnr type bsak-lifnr,
ebeln type bsak-ebeln,
DMBTR_C type bsak-DMBTR,
ZUONR type bsak-ZUONR,
end of ty_bsak.
types: begin of ty_bkpf,
BELNR type bkpf-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
end of ty_bkpf.
data: it_po type standard table of ty_po,
it_ekko type standard table of ty_ekko,
it_ekpo type standard table of ty_ekpo,
it_eban type standard table of ty_eban,
it_ekbe type standard table of ty_ekbe,
it_mseg type standard table of ty_mseg,
it_rbkp type standard table of ty_rbkp,
it_rseg type standard table of ty_rseg,
it_bseg type standard table of ty_bseg,
it_bsik type STANDARD TABLE OF ty_bsik with header line,
it_bsak type STANDARD TABLE OF ty_bsak,
it_bkpf type standard table of ty_bkpf,
wa_po type ty_po,
wa_ekko type ty_ekko,
wa_ekpo type ty_ekpo,
wa_eban type ty_eban,
wa_mseg type ty_mseg,
wa_rbkp type ty_rbkp,
wa_rseg type ty_rseg,
wa_bseg type ty_bseg,
wa_ekbe type ty_ekbe,
wa_bsik type ty_bsik,
wa_bsak type ty_bsak,
wa_bkpf type ty_bkpf.
data: it_fcat type slis_t_fieldcat_alv,
it_lshead type slis_t_listheader,
it_sort type slis_t_sortinfo_alv,
wa_fcat type slis_fieldcat_alv,
wa_lshead type slis_listheader,
wa_layout type slis_layout_alv,
wa_sort type slis_sortinfo_alv.
data :it_cl_data like table of clobjdat,
wa_cl_data like clobjdat.
data: values(10) type n.
data: value1(4) type N.
data: c_matkl type ekpo-matkl,
c_matnr type ekpo-matnr,
c_ekgrp type eban-ekgrp,
c_badat type eban-badat,
c_index type sy-tabix,
c_grmenge type mseg-erfmg,
c_low(10) type c,
c_high(10) type c,
c_date type string,
c_bukrs type ekko-bukrs,
c_WERKS type eban-WERKS.
data: gd_date(10).
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
*********Selection screen variables*********
selection-screen:begin of block b1 with frame title text-001.
select-options: s_bukrs for c_bukrs DEFAULT 'bmp1',
s_WERKS for c_WERKS,
s_matnr for c_matnr DEFAULT 'rm-01',
s_matkl for c_matkl ,
s_badat for c_badat ,"obligatory,
s_ekgrp for c_ekgrp.
parameters: ch_bal as checkbox.
selection-screen:end of block b1.
*initialization.
* PERFORM EVENT_CALL.
* PERFORM POPULATE_EVENT.
start-of-selection.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
perform getdata.
perform setdata.
perform fieldcat.
perform display.
*& Form GETDATA
form getdata .
select a~BANFN
a~bnfpo
a~ekgrp
a~badat
a~KNTTP
a~PSTYP
b~ebeln
b~ebelp
b~matkl
b~matnr
b~bukrs
into corresponding fields of table it_po
from eban as a inner join ekpo as b
on a~banfn = b~banfn and
a~bnfpo = b~bnfpo AND
A~KNTTP = B~KNTTP and
a~PSTYP = b~PSTYP
where a~badat in s_badat and
a~ekgrp in s_ekgrp and
a~WERKS in s_WERKS and
b~matnr in s_matnr and
b~matkl in s_matkl and
b~bukrs in s_bukrs and
b~loekz <> 'L' and
a~loekz <> 'X'.
if it_po[] is not initial.
select ebeln
ebelp
matnr
txz01
menge
meins
netpr
peinh
banfn
bnfpo
mtart
from ekpo into table it_ekpo
for all entries in it_po
where ebeln = it_po-ebeln and
ebelp = it_po-ebelp and
loekz <> 'L'.
select banfn
bnfpo
matnr
menge
meins
from eban into table it_eban
for all entries in it_po
where banfn = it_po-banfn and
bnfpo = it_po-bnfpo and
loekz <> 'X'.
if it_ekpo[] is not initial.
select ebeln
lifnr
bedat
from ekko into table it_ekko
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln.
select ebeln
ebelp
belnr
bldat
gjahr
buzei
matnr
DMBTR
shkzg
from ekbe into table it_ekbe
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp .
*if it_ekbe-shkzg = 'H'.
**ekbe-dmbtr = ekbe-dmbtr * -1.
**ekbe-menge = ekbe-menge * -1.
*endif.
* select belnr
* gjahr
* ebeln
* ebelp
* from bseg into table it_bseg
* for all entries in it_ekpo
* where ebeln = it_ekpo-ebeln and
* ebelp = it_ekpo-ebelp.
select belnr
gjahr
ebeln
ebelp
matnr
bukrs
from rseg into table it_rseg
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp.
endif.
if it_ekbe[] is not initial.
select mblnr
mjahr
zeile
menge
meins
ebeln
ebelp
matnr
werks
charg
from mseg into table it_mseg
for all entries in it_ekbe
where mblnr = it_ekbe-belnr and
mjahr = it_ekbe-gjahr and
zeile = it_ekbe-buzei and
bwart = '101'.
endif.
if it_rseg[] is not initial.
select belnr
gjahr
bldat
lifnr
ZUONR
RMWWR
WMWST1
from rbkp into table it_rbkp
for all entries in it_rseg
where belnr = it_rseg-belnr.
endif.
*if it_rseg[] is not initial.
* SELECT bukrs
* belnr
* gjahr
* buzei
* valut
* wrbtr
* augbl
* matnr
* lifnr
* ebeln
* INTO TABLE it_bseg
* FROM bseg
* FOR ALL ENTRIES IN it_rseg
* WHERE bukrs = it_rseg-bukrs and ebeln = it_rseg-ebeln and mwskz = ''.
*endif.
*loop at it_BKPF into wa_BKPF.
* values = wa_rbkp-belnr.
* value1 = wa_rbkp-gjahr.
data: aekey_1 type string .
*CONCATENATE values value1 into aekey_1.
* if it_BSEG[] is not initial.
*MESSAGE aekey_1 type 'I'.
SELECT single belnr xblnr awkey into wa_bkpf
from bkpf
where awkey = aekey_1.
SELECT SINGLe belnr
buzei
dmbtr
budat
shkzg
ebeln
lifnr
FROM bsik
INTO CORRESPONDING FIELDS OF wa_bsik
*FOR ALL ENTRIES IN it_bseg
WHERE
bukrs in s_bukrs and
lifnr = wa_rbkp-lifnr
and
*AND gjahr = it_bseg-gjahr
* AND
belnr = wa_bkpf-belnr.
insert wa_bsik into table it_bsik.
CLEAR wa_bsik.
CLEAR it_bsik.
*endloop.
* and ebeln = it_bseg-ebeln .
* select BELNR
** SHKZG
** DMBTR
* from bkpf into table it_bkpf
* for ALL ENTRIES IN it_rbkp
* where belnr = it_rbkp-belnr.
* ENDif.
IF IT_bseg[] IS NOT INITIAL.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsik into table it_bsik
for all entries in it_bseg
where belnr = it_bseg-belnr.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsak into table it_bsak
for all entries in it_bseg
where belnr = it_bseg-belnr.
ENDIF.
else.
message s002.
leave list-processing.
endif.
endform. " GETDATA
*& Form SETDATA
form setdata .
clear wa_po.
loop at it_po into wa_po.
c_index = sy-tabix.
********Calculate PR Quantity**********
clear wa_eban.
read table it_eban into wa_eban
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo.
if sy-subrc eq 0.
move:wa_eban-menge to wa_po-menge,
wa_eban-meins to wa_po-meins.
endif.
********Calculate PO Quantity**********
clear wa_ekpo.
read table it_ekpo into wa_ekpo
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo .
if sy-subrc eq 0.
move:wa_ekpo-txz01 to wa_po-txz01,
wa_ekpo-netpr to wa_po-netpr,
wa_ekpo-peinh to wa_po-peinh,
wa_ekpo-mtart to wa_po-mtart,
wa_ekpo-menge to wa_po-menge1,
wa_ekpo-meins to wa_po-meins1.
endif.
********Calculate Balance Quantity******
clear wa_mseg.
loop at it_mseg into wa_mseg
where ebeln = wa_po-ebeln and
ebelp = wa_po-ebelp.
c_grmenge = c_grmenge + wa_mseg-menge.
endloop.
move:wa_mseg-mblnr to wa_po-mblnr,
c_grmenge to wa_po-menge2,
wa_mseg-meins to wa_po-meins2,
wa_mseg-werks to wa_po-werks,
wa_mseg-charg to wa_po-charg.
wa_po-balqty = wa_eban-menge - c_grmenge.
clear : wa_rseg,wa_rbkp.
read table it_rseg into wa_rseg with key
ebeln = wa_mseg-ebeln
ebelp = wa_mseg-ebelp.
read table it_rbkp into wa_rbkp
with key belnr = wa_rseg-belnr
gjahr = wa_rseg-gjahr.
if sy-subrc eq 0.
move : wa_rbkp-belnr to wa_po-belnr,
wa_rbkp-bldat to wa_po-bldat,
wa_rbkp-RMWWR to wa_po-RMWWR,
WA_RBKP-WMWST1 TO WA_PO-WMWST1.
endif.
read table it_bseg into wa_bseg with key
ebeln = wa_rseg-ebeln
bukrs = wa_rseg-bukrs.
if sy-subrc eq 0.
move wa_bseg-belnr to wa_po-belnr_d.
endif.
* read table it_bkpf into wa_bkpf
* with key belnr = wa_ekbe-belnr.
* read table it_bseg into wa_bseg
* with key belnr = wa_bkpf-belnr.
CLEAR wa_bsik.
clear it_bsik.
read table it_bsik into wa_bsik
with key belnr = wa_bkpf-belnr.
* if wa_bsik-shkzg = 'H'.
* wa_bsik-DMBTR = wa_bsik-DMBTR * 1.
* endif.
if sy-subrc eq 0.
move : wa_bsik-belnr to wa_po-belnr,
wa_bsik-DMBTR to wa_po-DMBTR.
endif.
* clear wa_bsik.
* read table it_bsik into wa_bsik
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*clear wa_bsak.
* read table it_bsak into wa_bsak
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsak-DMBTR_C to wa_po-DMBTR_C.
* endif.
*clear : wa_rbkp.
*loop at it_bsik into wa_bsik.
*read table it_bsik into wa_bsik with key belnr = wa_rbkp-belnr.
*if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*endloop.
*********Assign Vendor,PO Date*********
clear wa_ekko.
read table it_ekko into wa_ekko
with key ebeln = wa_po-ebeln.
if sy-subrc eq 0.
move:wa_ekko-lifnr to wa_po-lifnr,
wa_ekko-bedat to wa_po-bedat.
endif.
*clear wa_ekko.
*read table it_ekko into wa_ekko
*with key lifnr = wa_po-lifnr.
*if sy-subrc eq 0.
* move: wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
* call function 'ZSD_BATCH_CLASSIFICATION_DATA'
* exporting
** ch_charg = wa_po-charg
* ch_matnr = wa_po-matnr
* ch_werks = wa_po-werks
* tables
* cl_data = it_cl_data
** I_SEL_CHARACTERISTIC =
loop at it_cl_data into wa_cl_data.
if wa_cl_data-ausp1 ne '?'.
if wa_cl_data-atnam eq 'THICKNESS'.
move wa_cl_data-ausp1 to wa_po-thick.
elseif wa_cl_data-atnam eq 'LENGTH'.
move wa_cl_data-ausp1 to wa_po-length.
elseif wa_cl_data-atnam eq 'WIDTH'.
move wa_cl_data-ausp1 to wa_po-width.
elseif wa_cl_data-atnam eq 'GRADE'.
move wa_cl_data-ausp1 to wa_po-grade.
endif.
endif.
endloop.
modify it_po from wa_po index c_index.
clear :c_grmenge,wa_po,wa_ekpo,wa_mseg,c_index.
endloop.
endform. " SETDATA
*& Form FIELDCAT
* text
* --> p1 text
* <-- p2 text
form fieldcat .
perform buildfields using '1' 'BANFN' 'IT_PO' 'PR Number' '' ''.
* perform buildfields using '2' 'BNFPO' 'IT_PO' 'PR Item Number' '' ''.
perform buildfields using '2' 'KNTTP' 'IT_PO' 'A/c Assignment Cat' '' ''.
perform buildfields using '2' 'PSTYP' 'IT_PO' 'Item Cat' '' ''.
perform buildfields using '3' 'EKGRP' 'IT_PO' 'Purchase Group' '' ''.
perform buildfields using '4' 'BADAT' 'IT_PO' 'Request Date' '' ''.
perform buildfields using '5' 'MENGE' 'IT_PO' 'PR Quantity' 'X' ''.
perform buildfields using '6' 'MEINS' 'IT_PO' 'PR Unit' '' ''.
perform buildfields using '7' 'LIFNR' 'IT_PO' 'Vendor Number' '' ''.
perform buildfields using '8' 'EBELN' 'IT_PO' 'Purchasing Doc No' '' '' .
perform buildfields using '9' 'BEDAT' 'IT_PO' 'PO Date' '' ''.
perform buildfields using '10' 'MTART' 'IT_PO' 'Material Type' '' ''.
perform buildfields using '11' 'MATKL' 'IT_PO' 'Material Group' '' ''.
perform buildfields using '12' 'MATNR' 'IT_PO' 'Material Number' '' ''.
perform buildfields using '13' 'TXZ01' 'IT_PO' 'Material Desc' '' ''.
perform buildfields using '18' 'MENGE1' 'IT_PO' 'PO Quantity' 'X' ''.
perform buildfields using '19' 'MEINS' 'IT_PO' 'PO Unit' '' ''.
perform buildfields using '20' 'NETPR' 'IT_PO' 'Net Price' '' ''.
perform buildfields using '21' 'PEINH' 'IT_PO' 'Price Unit' '' ''.
perform buildfields using '22' 'MBLNR' 'IT_PO' 'GR Number' '' ''.
perform buildfields using '23' 'MENGE2' 'IT_PO' 'GR Quantity' 'X' ''.
perform buildfields using '24' 'MEINS2' 'IT_PO' 'GR Unit' '' ''.
perform buildfields using '25' 'BELNR' 'IT_PO' 'Invoice doc. number' '' ''.
perform buildfields using '26' 'BLDAT' 'IT_PO' 'Invoice Date' '' ''.
* perform buildfields using '26' 'BELNR_D' 'IT_POP' 'A/C Doc. No.' '' ''.
* perform buildfields using '26' 'AUGBL' 'IT_PO' 'Clearing Doc No.' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'OPEN AMOUNT' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'clear AMOUNT' '' ''.
* perform buildfields using '26' 'DMBTR_C' 'IT_PO' 'Clear balance' '' ''.
if ch_bal = 'X'.
perform buildfields using '27' 'BALQTY' 'IT_PO' 'Balance Quantity'
'X' ''.
endif.
perform buildfields using '26' 'WMWST1' 'IT_PO' 'TOTAL TAX ADDED' 'X' ''.
perform buildfields using '26' 'RMWWR' 'IT_PO' 'TOTAL AMOUNT IN INVOICE' 'X' ''.
endform. " FIELDCAT
*& Form BUILDFIELDS
* text
* -->P_0449 text
* -->P_0450 text
* -->P_0451 text
* -->P_0452 text
form buildfields using value(p_col_pos) like sy-cucol
value(p_fldname) type slis_fieldname
value(p_tabname) type slis_tabname
value(p_reptext) like dd03p-reptext
value(p_do_sum) type char1
value(hotspot) type char1.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fldname.
wa_fcat-tabname = p_tabname.
wa_fcat-reptext_ddic = p_reptext.
wa_fcat-do_sum = p_do_sum.
wa_fcat-hotspot = hotspot.
append wa_fcat to it_fcat.
clear wa_fcat.
endform. " BUILDFIELDS
*& Form DISPLAY
form display .
clear wa_layout.
wa_layout-zebra = 'X'.
wa_layout-colwidth_optimize = 'X'.
* wa_layout-box_fieldname = 'SEL'.
* wa_layout-edit = 'X'.
perform build_sort using 'BANFN' '1' 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-cprog
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
i_callback_top_of_page = 'TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
i_background_id = 'ALV_BACKGROUND'
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
I_SAVE = 'A'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_po[]
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " DISPLAY
*& Form top_of_page
* text
form top_of_page. "#EC *
**********Create report header*********
refresh it_lshead.
clear wa_lshead.
**********To display date in header*********
* write: s_badat-low to c_low dd/mm/yyyy,s_badat-high to c_high
* dd/mm/yyyy.
* if s_badat-high is initial.
* concatenate 'Dated on' c_low into c_date separated by space.
* else.
* concatenate 'Dated between' c_low 'and' c_high into c_date separated
* by space.
* endif.
wa_lshead-typ = 'H'.
wa_lshead-info = 'PR To Payment History'.
* 'Pending Indents History -We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw -
Apple Mini-DVI to Video Adapter - Can't get it to work!
Bought the Apple Mini-DVI to Video Adapter to hook up my Macbook to my TV. I tried it when it first arrived and it worked within minutes of setting up. Great! I go to set it up and use it again a week later, and it wouldn't work at all. I went through every possible setting I could to try and get it to work, nothing. Do these things have a tendency to go out or short out or something? I'm getting nothing but scrambled screens, grey screens, etc. Nothing seems to work.
http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY
Any other solutions for playing my laptop on my TV?Hey Rob,
Is your profile information accurate? The MacBook 2,1 was introduced in November of 2006 and discontinued in May of 2007, so the mini-DVI to video adapter ought to work.
What, exactly, do you see on your screen? Are all of the connections nice and snug? Do you have another RCA cable you can try? You can use a white or red one if you want; they all will work as long as you're connecting the video adapter to the yellow port on the TV.
~Lyssa -
Mini-DVI to Video Adapter No Longer Compatible
This is an infuriating subject for me. I had a 2007 2.0Ghz Intel Core 2 Duo White Macbook. On a daily basis i used it with my widescreen TV. I am not made of money, so it is an old tube screen that requires a composite connection.
When that macbook decided to not work anymore, even after several repairs, they replaced it with a new 2009 2.0Ghz Intel Core 2 Duo white macbook. Of course, the higher spec that came with this seemed like i should have been grateful. No, I've just been P.O'd ever since. I can no longer use my Macbook to watch movies on my big screen as the DVI adaptor which i paid a completely stupid amount of money for no longer works. I'm sure this problem could be fixed with some kind of a patch for the NVIDIA GeForce 9400M it comes with. But i guess they have just forgot about the white macbook now. Great.
Does anyone out there know of any way around this problem? Again, i want to connect a 2.0GHz Intel Core 2 Duo white MacBook introduced after January 2009 to a composite connection as once used in the Mini-DVI to Video Adaptor. Anyone know of a solution?
I ask again for this to not be deleted like all my other negative posts. It DOES contain a question, which i very much wish to be answered.
Regards,
Steve.
Message was edited by: skeletal_wreckI dont think you understand. Yes, it does use the same connections - it all connects up properly. But after 2009 the white macbooks no longer recognize the TV-Out when you connect the mini-DVI to Video adaptor.
On my old 2007 white intel macbook that had the old graphics card, i was able to connect it all up then go into display preferences and it allowed me to set up the screens as i wanted (ie mirrored, side by side etc). Now, under displays settings, that is no where to be seen.
Its a nothing to do with anyhting being wrong, its just known that Apple discontinued support for it. Even on the apple store website here, you will see in small print under the adapter that it is not supported on white macbooks from 2009 January onwards.
I want to know is there any other solutions. -
Mini dvi to video adapter ...how does this work?
I just bought a mini-dvi to video adapter (with the composite /s-video output)
I plugged it into my tv, and I can get the desktop on my tv.
But I see only the desktop, no icons or windows etc. Do I have to setup something? Or change something in my system preferences?
I don't really get it since there came no manual with the cable.Hi,
it is possible that the output is not mirrored, but that you have two different desktops. The one on your TV does not have the menubar etc.
But you should be able to move any open window from your iMacs screen to your TV (either over the left or right side of the screen).
volker -
Any ideas for a status or "at a glance" splash screen / presentation?
This is an idea I've been tossing around and wanted to know if there was something easy out there that would accomplish this...
I'd like to mount a monitor in one of our common areas for the management team and have it display current statuses of some of our IT features/services and maybe quick bits on what we are currently working on, major issues, etc...
I've seen some company lobbies with similar setups that display company-wide information, weather, etc.. so I know the capability is out there but I don't know squat regarding what that would entail. The easier, the better, naturally... as I don't want this to turn into an entire job position updating it, haha. But something that I could hopefully remotely update would be nice.
Any ideas? Thanks!
This topic first appeared in the Spiceworks CommunityPlease see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
In iCal, I have it set up in my preferences to display 7 days a week and to scroll in weeks. But It shows 6 days a week and changes views every time I select a different day of the same week. It's not affecting any of my data, but it's strange and it's making it difficult for me to set up my alendar the way I;m used to it.
It all started when I first installed Snow Leopard. At first when I would change the preferences around, things would change to the way I like the temporarily, and then if I moved two weeks forward, iCal would freeze and shut down. But know it's consistently in the wrong view.
Any ideas on what might fix this?I have an odd one too. Yesterday I allowed an automatic update to OS 10.5.8 (Leopard) and thereafter iCal is acting strange. I open iCal in month view and all looks normal. I click a month ahead and that all looks normal....Thanksgiving is the third Thursday in November, etc. I then click the left (previous) arrow and nothing appears to happen. Still November. If I click "previous again it goes to September but Thankgiving is still showing. The oddest part is that it looks like two or more months are showing at once. I can sort of see through some of the appointments from November to a little more bold appointments that I had in September. Very strange.
Any ideas?
Cheers,
Mac -
IS there a way to get a schedule view of events on a busy day in iCal on the iPad 2 Air and on the Macbook Pro? I can get this view on an iPhone.
I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks) or share some of my personal information (scanned copies of my birth certificate, passport, certificates, photos, etc.) on the web.
If you put your info into the computer and hand it to another, you have to assume they will copy everything.
Why are you putting scanned copies of valuable identity information into a computer than can be hacked, stolen, lost or compromised by a dirty tech?
Have you lost your mind?
Is there a way of finding out what activity has taken place whilst they've had it in their possession?
No. The tech would just deny it if he did, or tell the truth which the answer would be "NO" in either case.
The employer won't ask that sort of questions without solid proof, less they make a enemy of the employee and/or risk being sued for defamation of character.
It's not like they bother to have a team of people watching over his shoulder that he doesn't stick a USB thumb drive of your data into his pocket to take home.
I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks)
If it's iTunes music, it has your personal ID embedded into the song files. Most IT techs know this though.
I appreciate any advice you guys can offer.
Too late now, all you can do is not worry about it.
Take your personal info out of the machine and if you need it, burn cd/dvd copies, a few USB thumb drives, Iron Keys or self encrypting external storage drives with key and/or keypad. -
One apple ID for multiple family members
Hi,
We are new to the Iphone products. We have shared an Apple ID since christmas with my two children to help control what they are downloading etc on thier Iphones. Currently for some unknown reason when one of my children send me text message it comes accross to my phone as an email address which is what is used as our apple ID from when I originally got us set up for the ipods from years ago. since getting the Iphones this all of a sudden seams to be an issue with only one of our phones.
Any suggestions how to fix this? We deleted the icloud accounts, and have done the "soft" reimage per verizon wireless. Do we really have to set our children up with thier own email addresses and Apple ID's too?
Any suggestions would be helpful.
thank you,To fix this go to Settings>Messages>Send & Receive and do one of the following:
1. Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
2. If you want to continue to receive iMessages at this email address on one of your phones, on the other phone tap the Apple ID at the top, sign out, then sign back in using a different Apple ID (so both phones will be using a different Apple ID for iMessage). Note: you can continue to share an Apple ID for purchasing from the iTunes and App stores. It does not need to be the same as the ID you are using for iMessage, FaceTime and other services.
Because you are using the same Apple ID for iMessage. To prevent this, on one of the phones go to Settings>Messages>Send & Receive, tap the Apple ID, sign out, then sign in with a different Apple ID. Note: you can continue to share an Apple ID for purchasing; it does not need to be the same as the ID you use for iMessage, FaceTime, iCloud and other services.
Also, to prevent merging your calendars and contacts if you are syncing these to the same iCloud account, be sure to set up separate iCloud accounts on each phone with separated IDs. -
Multiple Family Members using a MAC
Hello,
Can someone give me an overview of how family members all use 1 MAC and ICloud so that each person gets their own "stuff"? For example, I would like to get my calendar, my songs, my contacts, my apps synced with my devices--iphone and ipad. And my wife would like her own stuff synced. Seems pretty fundamental but I could not find any info from Apple. Is there a way to do this if each person has a separate Apple ID? What are other people doing?
Thanks,
MattIf each person has a separate Apple ID, as you stated, it should be no problem. However, i'm not sure exactly how you have your computer set up, if you have separate User accounts set up, or if you just use one User account.
You should create a separate User account for each family member. Decide if you want those User accounts to be Administrator accounts, or if they are Standard accounts, and set your Parental Controls as desired. You can also find the Parental Controls settings in the System Preferences as well.
So once each User account is established, you can copy over only the information for them (i.e. contacts, iCal events, iTunes music, etc).
Set up to sync their iOS devices with iTunes with their information on their User accounts, with their own separate Apple IDs, and everything should work smoothly.
Maybe you are looking for
-
Hi I'm using Apex 3.1.2, and am fairly new to using Interactive reports. I've found the URL syntax to apply a filter on an IR, and was just wondering if it is possible to apply a sort, or even open a saved report from a URL link? I am well aware that
-
Today when I turned on my iMac G5 mail said Mail can not update your mailboxes because your home directry is full. You must free up space in your home folder before using Mail. Delete unneeded documents or move documents to another volume. Then it on
-
Not able to export in 720p or 1080p
When trying to export videos, I never have the option to export in either 780p HD or 1080p HD. They are always grayed out. Is there a way to change/fix this? I am using imovie '11 and osx Lion
-
CCADStatus.jsp not showing up (Analysis Engine Daemon Manager)
We are in GRC5.3 SPS19 and I have configured our system as per the note 999785. I am able to see the http://<server>:<port>/sap/CCBgStatus.jsp, I am seeing that the job is being run, but when I try "http://<server>:<port>/sap/CCADStatus.jsp" while I
-
Printer capability gone after "update"....how to get it back?
Since Firefox update, my HP printer won't activate to print. How do I get the use of my printer back??