ADAPT00181667-INVALID SEEK ADDRESS

Post Author: [email protected]
CA Forum: General
Can anyone tell me if this has been resolved and what the work-around is? It has to do with the 2gb limit on the temporary work file when the report is being generated. I'm in dire need of a resolution today. Could this be a server issue now or still a Crystal issue?
Thanks!
ps - i'm on Crystal 10.0 - service packs 5 and 6 installed / Windows / SQL

Hello Mark Bentley1. Welcome to the Apple Discussions!
Please double-check your network connections: You should have an Ethernet cable connected between the modem and the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). In turn, your iMac would be connected to one of the available LAN (opposing arrows) ports on the AEBS.
If these connections are already correct, then you should try a complete power-recycle of your network components to allow the modem to "recognize" the new device (AEBS) connected to it for proper communication.
Please try the following:
o Power-off the modem, AEBS and iMac; order is not critical. Leave powered-off for at least 10-15 minutes.
o Power-on the modem; wait at least 10 minutes.
o Plug-in the AEBS; wait at least 5 minutes.
o Power-on the iMac.

Similar Messages

Invalid recipient address - while sending mails

Hi Experts,
I am trying to send a PDF form as a mail attachment from my SAP R/3 server (version ECC 6.0)
Using the following code:
PARAMETER : p_addr TYPE adr6-smtp_addr DEFAULT 'ashish.shah xyz.com'.
*"Look up the generated function for the Book Flight Form
DATA : l_name TYPE funcname.
TRY.
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
      EXPORTING
        i_name     = 'Z_CUST_BOOK_FLIGHT_FORM'
      IMPORTING
        e_funcname = l_name
      EXCEPTIONS
        OTHERS     = 0.
CATCH cx_fp_api_repository.                           "#EC NO_HANDLER
CATCH cx_fp_api_usage.                                "#EC NO_HANDLER
CATCH cx_fp_api_internal.                             "#EC NO_HANDLER
ENDTRY.
DATA : l_outputparams TYPE sfpoutputparams.
*"Start form processing
l_outputparams-getpdf = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
    ie_outputparams = l_outputparams
EXCEPTIONS
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    OTHERS          = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*" Call the generated function for the Book Flight Form
DATA : fp_docparams TYPE sfpdocparams,
       reservedonly TYPE bapisbodat-reserved,
       booking_data TYPE bapisbonew,
       fp_result    TYPE fpformoutput.
fp_docparams-fillable = 'X'.
fp_docparams-langu = sy-langu.
CALL FUNCTION l_name
EXPORTING
    /1bcdwb/docparams = fp_docparams
    reserved           = reservedonly
    booking_data       = booking_data
IMPORTING
    /1bcdwb/formoutput = fp_result
EXCEPTIONS
    usage_error        = 1
    system_error       = 2
    internal_error     = 3
    OTHERS             = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA : pdf TYPE fpformoutput-pdf.
pdf = fp_result-pdf.
*"End the form Processing session
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
    usage_error    = 1
    system_error   = 2
    internal_error = 3
    OTHERS         = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*"Create and send the email
DATA : bcs_exception TYPE REF TO cx_bcs.
TRY.
*"Add text to the email body
    DATA : l_subject      TYPE so_obj_des,
           l_mailtext     TYPE bcsy_text,
           l_mailtext_row TYPE soli.
    l_subject = 'Trip Creation Form'.
    CONCATENATE 'Please fill out the form and return it to:'
                'ashish.shah xyz.com'
                INTO l_mailtext_row.
    APPEND l_mailtext_row TO l_mailtext.
*"Create the email document
    DATA : document   TYPE REF TO cl_document_bcs,
           num_rows   TYPE i,
           textlength TYPE so_obj_len.
    DESCRIBE TABLE l_mailtext LINES num_rows.
    num_rows = num_rows * 255.
    MOVE num_rows TO textlength.
    document = cl_document_bcs=>create_document(
                 i_type    = 'RAW'
                 i_text    = l_mailtext
                 i_length = textlength
                 i_subject = l_subject ).
*"Add ataachment
    DATA : attdoctype TYPE soodk-objtp,
           atttitle   TYPE sood-objdes,
           attsize    TYPE sood-objlen,
           pdftab     TYPE solix_tab.
    attdoctype = 'pdf'.
    atttitle = 'CreateFlight'.
    attsize = XSTRLEN( pdf ).
    pdftab = cl_document_bcs=>xstring_to_solix(
                ip_xstring = pdf ).
    document->add_attachment( EXPORTING i_attachment_type = attdoctype
                                        i_attachment_subject = atttitle
                                        i_attachment_size = attsize
                                        i_attachment_language = sy-langu
                                        i_att_content_hex = pdftab ).
*"Create persistent send request
    DATA : send_request TYPE REF TO cl_bcs.
    send_request = cl_bcs=>create_persistent( ).
*"Add document to send request
    send_request->set_document( document ).
*"Get sender object
    DATA : sender TYPE REF TO cl_sapuser_bcs.
    sender = cl_sapuser_bcs=>create( 'A146861' ) .
*"Add sender
    CALL METHOD send_request->set_sender
      EXPORTING
        i_sender = sender.
*"Create recipient
    DATA : recipient TYPE REF TO if_recipient_bcs.
    recipient = cl_cam_address_bcs=>create_internet_address(
                                              p_addr ).
*"Add recipient with its respective attributes to send request
    send_request->add_recipient( EXPORTING i_recipient = recipient ).
*"Set send immediately
    send_request->set_send_immediately( 'X' ).
*"Send document
    send_request->send( ).
    COMMIT WORK.
    WRITE: 'Email coantaining the Interactive form was sent'.
CATCH cx_bcs INTO bcs_exception.
    DATA : ex_msg TYPE string.
    ex_msg = bcs_exception->get_text( ).
    WRITE: 'Caught exception.', ex_msg.
ENDTRY.
I get a Mail sending failure notification in my SAP Businesss work place, with the title "Cannot be sent: Trip Creation Form " With status as :
Status for Recipient ashish.shah xyz.com:
     No delivery to ashish.shah xyz.com, invalid recipient address
I have entered the correct Email IDs, but still getting this error.
Can you guys help?
Regards,
Ashish Shah

Hi Ravi,
I have @ in all the email IDs in my code , but i have removed it from this post.
It seems SDN has implemented some new check - where in it checks for Email IDs in the post and gives error when any email ID is encountered.
Can you now spot anything else , which could be the cause for the status as Invalid receipient?
Regards,
Ashish Shah

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

In this case you won't be able to do that?

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

Exchange 2007 in iCal not working. - Invalid Email address

I did the exchange setup - Email works.
Addess book - Contacts are there but the Global Address book does not produce anything.
iCal - all the setting are correct but it won't connect to the calendar. The error:
Invalid Email address. It is the correct address and works in the other areas.
Any ideas????
Seems like other have issue as well
Thanks
Paul
Our Exchange service is provided by Intermedia.
Are there detailed instructions for the Exchange settings

I'm having the same problem here. Gerr.

Airport Extreme invalid IP address, no DNS server

Hardware: Motorola SURFboard SB6141, Airport Extreme A1408
I recently set up a new internet service with Cox, plugged in the SB6141 and A1408 and everything set up perfectly, solid green light and wireless was flawless. However, electricity to my house had to be reset, and when the power came back on the green light on the Airport Extreme started to flashing amber. I did several hard/factory resets of the Airport Extreme as well as unplugging the modem and leaving everything unplugged for several minutes and then plugging everything back in. No matter what combination of things I try to do, the Airport Utility always tells me the same 2 errors: invalid IP address and no DNS server. Why was the Airport Extreme able to automatically set up the first time, but not now? Any ideas of what I can do? Thanks!

I have also looked through other threads about this same problem, but none of the solutions (e.g. posts by Tesserax, followed to the letter) so far have worked.
Here are other things I have tried:
1. Called Cox to have them reset my modem, internet works through Ethernet directly from the modem
2. Downgraded AEBS firmware to 7.6.1 (oddly enough, now I cannot for the life of me update the firmware back to 7.6.4, always says cannot connect to update server)
I ran through the various solutions from this thread: "No DNS servers" and "Internet connection" problems with Comcast?
Still getting that pesky blinking amber light.

ITunes 6.0 and invalid billing address

I recently upgraded to iTunes 6.0. Now every time I try and purchase music iTunes tells me I have an invalid billing address. This is the same address I have been at for 5 years, and using for iTunes for 3. I tired the email support but just got the generic email back. iPod customer support verifies that my address is fine but they have no involvement with iTunes customer support. Does anyone have a way to contact a live person in iTunes customer support? Anyone else have this issue?

OK, Now I'm downloading. I changed the county to that which my city center is in (Yamhill), despite that my HOUSE is in a different county (Washington).
Thank you for the tips.
Dell Latitude Windows XP Pro SP2

OS won't boot--invalid memory address message

10.4.9 running on a G4 867 Dual. System won't boot from internal disk or from Tiger installation CD. I get an error message for an invalid memory address followed by some hex code. The message says I can type "boot-up" but all I get is the little folder icon, then the flashing question mark. If I type "shut-down" this works.
I've detached all external accessories, disks, etc. I reset the memory chips. Unplugged two of my 4 internal disks. Doesn't help.
What I was doing before this--running iDefrag on one of my internal disks (not the startup disk), stopped & quit the app partway. Also running SuperDuper backing up yet a third internal disk to my external firewire storage--also stopped & quit partway.
I inserted my 10.4 installation disk to install a system on an external firewire disk (none of the above, I have a lot of drives) but could not start up from the CD. Started to get the error above. Can't eject CD, either. Bluetooth seems fine as my Apple bluetooth keyboard works.
Another tidbit--my combo drive may be having problems seeing discs. Some will mount on my iBook but not on the G4 Dual.
Any ideas?
G4 Dual 867 Mac OS X (10.4.9) 2 GB RAM

hey if you actually restrt your mac now where will your mac boot up to does it reach the firmware screen if it does just try typing in
reset-nvram
and then
reset-all
the mac should restart

#550 5.1.3 STOREDRV.Submit; invalid recipient address #SMTP# Exchange 2010

We have one user who is getting undeliverable bounces for some emails they send. These bounces look like
Delivery has failed to these recipients or groups:
The format of the e-mail address isn't correct. A correct address looks like this:
[email protected] Please check the recipient's e-mail address and try to resend the message.
With the header:
#550 5.1.3 STOREDRV.Submit; invalid recipient address #SMTP#
Original message headers:
Received: from xxxxxxxx ([2002:80e8:f350::80e8:f350]) by
xxxxxxx ([::1]) with mapi id 14.02.0298.004; Wed, 5 Sep
2012 11:30:27 +0100
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: xxxxxx
To: xxxxx
Subject: FW:
Thread-Topic: Economics
Thread-Index: Ac2GxPSoAC0JPealQhq9mnAnQxf7SQEiPj2gAADJepA=
Date: Wed, 5 Sep 2012 11:30:27 +0100
Message-ID: <7D0ACDCF411B26429DC7355744AEFF9A02D8AC@xxxxxx>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <7D0ACDCF411B26429DC7355744AEFF9A02D8AC@xxxxxxx>
MIME-Version: 1.0
X-Originating-IP: [xxx.xxx.xxx.xx]
So far most of the bounces for this user appear to be to the same domain which takes the format xxx.ac.uk our domain is yyy.xxx.ac.uk
We are currently using Exchange 2010 having migrated in the last month from 2003. We are also using an Edge server.
Thanks for any help

On Wed, 5 Sep 2012 11:52:43 +0000, Rah33 wrote:
>I have noticed that so far the addresses that have bounced back are Mail Contacts that have been created on the Exchange server. If you go into the properties for one of these contacts you get a message saying that some properties are invalid and will
be replaced with defaults. It also prompts to update the contact.
If you update the contact does it eliminate the problem?
What properties are invalid? It isn't uncommon to find "alias"
properties that contain spaces or other characters that earlier
versions (i.e. pre-Exchange 2007) allowed.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Sending mail to invalid mail address but domain valid.im not getting any NDR

Hi,
In my organisation I'm sending mail to invalid email address but domain is valid ...i'm not getting any NDR. I want NDR like this
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk

Hi,
Please check whether other users can receive NDR message when sending mails to invalid email address. If the issue happens to all users and all related configurations are proper, please check whether there are any transport rules directly
deleted the mails that send to an invalid address.
Thanks,
Winnie Liang
TechNet Community Support

How to delete an apple-id that was created with an invalid email address?

After upgrading to IOS.5.0, my apple-id for the IPod was incorrectly change to an invalid email address.
I have verified my apple id on itunes on my desk top. How ever, the apple id on the IPad is still an invalid address which I can't validate or change.
Any ideas will be appreciated.
Thanks
Mitch

If everything works in iTunes on the computer see if this works. Sign out of the invalid account/email address and the sign in with the correct one on the iPad. Settings>Store>Apple ID - sign out.
Restart the iPad before you try signing in with the correct ID.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

What are valid and invalid email address characters

What are valid and invalid email address characters in Exchange 2010, for example can you have Conan.O'[email protected] is there a document that shows the valid and invalid sysmbols?

Hi
The format of email addresses is
local-part@domain where the local-part may be up to 64 characters long and the
domain name may have a
maximum of 253 characters - but the maximum 256 characters length of a forward or reverse path restricts the entire email address to be no more than 254 characters.<sup id="cite_ref-0">[1]</sup>
The formal definitions are in RFC 5322 (sections 3.2.3
and 3.4.1) and RFC 5321 - with a more readable form given in
the informational RFC 3696<sup id="cite_ref-1">[2]</sup>
and the associated errata.
Local part
The local-part of the email address may use any of these
ASCII characters
RFC 5322 Section
3.2.3:
Uppercase and lowercase English letters (a–z, A–Z) (ASCII: 65-90, 97-122)
Digits
0 to
9 (ASCII: 48-57)
Characters
!#$%&'*+-/=?^_`{|}~ (ASCII: 33, 35-39, 42, 43, 45, 47, 61, 63, 94-96, 123-126)
Character
. (dot, period, full stop) (ASCII: 46) provided that it is not the first or last character, and
provided also that it does not appear two or more times consecutively (e.g. [email protected] is not allowed.).
Special characters are allowed with restrictions. They are:
o
Space and
"(),:;<>@[\] (ASCII: 32, 34, 40, 41, 44, 58, 59, 60, 62, 64, 91-93)
The restrictions for special characters are that they must only be used when contained between quotation marks, and that 3 of them (The
space, backslash \ and
quotation mark " (ASCII: 32, 92, 34)) must also be preceded by a backslash
\ (e.g.
A quoted string may exist as a dot separated entity within the local-part, or it may exist when the outermost quotes are the outermost characters of the local-part
(e.g. abc."defghi"[email protected] or
"abcdefghixyz"@example.com are allowed. Conversely,
abc"defghi"[email protected] is not; neither is
abc\"def\"[email protected]). Quoted strings and characters however, are not commonly used.
RFC 5321 also
warns that "a host that expects to receive mail SHOULD avoid defining mailboxes where the Local-part requires (or uses) the Quoted-string form".
The local-part "postmaster" is treated specially - it is case-insensitive, and should be forwarded to the server's administrator. Technically all other local-parts
are case sensitive, therefore [email protected] and [email protected] specify different mailboxes. However most organizations treat uppercase and lowercase letters as equivalent, and also do not allow use of the technically valid characters
(space, ? and ^). Organizations are free to restrict the forms of their own email addresses as desired, e.g.,
Windows Live Hotmail,
for example, only allows creation of email addresses using alphanumerics, dot (.), underscore (_)
and hyphen (-).<sup id="cite_ref-2">[3]</sup>
Systems that send mail must be capable of handling outgoing mail for all valid addresses. Contrary to the relevant standards, some defective systems treat certain
legitimate addresses as invalid and fail to handle mail to these addresses. Hotmail, for example, refuses to send mail to any address containing any of the following standards-permissible characters:
!#$%*/?^`{|}~
Domain part
The domain name part of an email address has to conform to strict guidelines: it must match the requirements for a
hostname,
consisting of letters, digits, hyphens and dots. In addition, the domain part may be an
IP address
literal, surrounded by square braces, such as jsmith@[192.168.2.1], although this is rarely seen except
in email spam.
Examples
Valid email addresses
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>much."more\ unusual"@example.com</tt>
<tt>very.unusual."@"[email protected]</tt>
<tt>very."(),:;<>[]".VERY."very@\\\ \"very"[email protected]</tt>
Invalid email addresses
<tt>Abc.example.com</tt> (an @ character must separate the local and domain parts)
<tt>[email protected]</tt> (character dot(.) is last in local part)
<tt>[email protected]</tt> (character dot(.) is double)
<tt>A@b@[email protected]</tt> (only one @ is allowed outside quotation marks)
<tt>a"b(c)d,e:f;g<h>i[j\k][email protected]</tt> (none of the special characters in this local part
is allowed outside quotation marks)
<tt>just"not"[email protected]</tt> (quoted strings must be dot separated, or the only element making
up the local-part)
<tt>this is"not\[email protected]</tt> (spaces, quotes, and backslashes may only exist when within
quoted strings and preceded by a slash)
<tt>this\ still\"not\\[email protected]</tt> (even if escaped (preceded by a backslash), spaces, quotes,
and backslashes must still be contained by quotes)
Terence Yu
TechNet Community Support

Mailer object error message "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19".

I am trying to send an email from Lookout V6.6 using the Mailer object. I have an email address setup through GMAIL and have verified it works. Also, Lookout Mailer object is able to verify GMAIL server. I get the following error message when trying to send the email: "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19". Anyone know what is causing this?

Another method is to use a SMTP relayer, we have deployed them in the past.
http://www.hmailserver.com/index.php?page=welcome
Mike
Forshock - Consult.Develop.Solve.

Invalid soap address, unknown protocol jms

Hi, All,
I try to create a web service project based on a WSDL which soap based on JMS as following:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="AsyncBusiness"
     targetNamespace="http://www.alsb.com/AsyncBusiness/"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
     xmlns:tns="http://www.alsb.com/AsyncBusiness/"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <types>
          <xsd:schema targetNamespace="http://www.alsb.com/AsyncBusiness/"
               xmlns:order="http://www.alsb.com/order/">
               <xsd:import namespace="http://www.alsb.com/order/"
                    schemaLocation="order.xsd" />
               <xsd:element name="submitOrder" type="order:Order" />
          </xsd:schema>
     </types>
     <message name="submitOrder">
          <part element="tns:submitOrder" name="submitOrder" />
     </message>
     <portType name="AsyncBusiness">
          <operation name="submitAsyncOrder">
               <input message="tns:submitOrder" />
          </operation>
     </portType>
     <binding name="AsyncBusinessSOAP" type="tns:AsyncBusiness">
          <soap:binding style="document"
               transport="http://www.openuri.org/2002/04/soap/jms" />
          <operation name="submitAsyncOrder">
               <soap:operation
                    soapAction="http://www.alsb.com/AsyncBusiness/submitOrder" />
               <input>
                    <soap:body parts="submitOrder" use="literal" />
               </input>
          </operation>
     </binding>
     <service name="AsyncBusiness">
          <port binding="tns:AsyncBusinessSOAP" name="AsyncBusiness">
               <soap:address
                    location="jms://192.168.48.1:7001/AsyncOrderSelf_WS/AsyncBusiness?URI=jms.WebServiceQueue" />
          </port>
     </service>
</definitions>
the problem is when I generate web service based on that, error found: invalid soap address, unknown protocol jms. How can I make it work?
I'm using workshop 10.3 for weblogic. Thanks in advance.
Best Regards,
Bill
Edited by: Bill Cao on May 20, 2009 11:13 AM

Bill,
Soap Address should always should be standard.
But you can change the action type under the wls binding part
for example I will provide one sample and it work perfectly at my end.



<wsdl:binding name="SampleJMSSoapBinding" type="invws:SamplePort">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/jms" />
<wsdl:operation name="DeleteParty">
<soap:operation soapAction="http://xmlns.oracle.com/communications/webservice/DeleteParty" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
<wsdl:fault name="InventoryFault">
<soap:fault name="InventoryFault" use="literal" />
</wsdl:fault>
<wsdl:fault name="ValidationFault">
<soap:fault name="ValidationFault" use="literal" />
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>



<wsdl:service name="Sample">
<wsdl:port name="SampleHTTPPort" binding="invws:SampleHTTPSoapBinding">
<soap:address location="http://localhost:7001/Sample/SampleHTTP" />
</wsdl:port>
<wsdl:port name="SampleJMSPort" binding="invws:SampleJMSSoapBinding">
<soap:address location="jms://localhost:7001/Sample/SampleJMS?URI=inventoryWSQueue" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
let me know whether this will help any where.
Regards,
Kal.

"Invalid Destination Address" for MMS messages

I got an HTC One M8 about a month ago, and everything has been working great. However, the last 2 or 3 days, I haven't been able to send MMS messages. I know that the numbers are correct, because I have been grabbing them straight from my contacts, and I have triple checked them. I've tried about 5 different pictures with 5 different contacts, and every time I do, a red triangle with an explanation point in the middle comes up saying "invalid destination address". I have no idea what happened, as it's been working up until the last few days. I have tried with and without WiFi, force stopped my messages and cleared the cache. Nothing works. Can anyone help, please?

RDSHARP39, thanks for trying all of those steps for us. I want to make sure that we get the device back up and running like it is suppose to. Are you able to receive picture messages from your contacts? Have you been able to power off the device and pull the sim card out for a good 10-15 seconds: http://vz.to/1B3J1vX After that time frame please place the sim card back into the device and re-try sending a picture message. Keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

ADAPT00181667-INVALID SEEK ADDRESS

Similar Messages

Maybe you are looking for