Add Header Custom Tab to PO and Contract

Dear Gurus,
I need to add custom tab with WYT3 field to PO and Contract Header.
Could you please help me to understand how to do that?
Thank you in advance,
Fuffo

Hi Ganga,
This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
1. fing out the package or program name for the transaction(by gng in the setting)
2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
3.find out the appropriate one by putting in the break point.
4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
5. there you will get the fm exit for PBO and PAI as well.
Hope this might help you in solving the problem.
Pooja

Similar Messages

  • Add a custom tab to include custom fields in Shipment Screen (VT03N)

    Hello every one,
    We have a requirement to add a custom tab to include custom fields in shipment header.
    Can any one of you help me on this?
    Thanks in advance !!!
    Regards,
    Ganga

    Hi Ganga,
    This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
    1. fing out the package or program name for the transaction(by gng in the setting)
    2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
    3.find out the appropriate one by putting in the break point.
    4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
    5. there you will get the fm exit for PBO and PAI as well.
    Hope this might help you in solving the problem.
    Pooja

  • Add two customer tab in ME53N screen

    Hi Experts,
    We have added one customer tab in the (ME53N) Requisition screen using screen exit SAPLMEGUI (SUB0).
    Is it possible to add another customer tab to that screen?
    Regards,
    Anirban

    Hi Anirban,
    We can achieve the target of adding a customer tab using the exit MEREQ001.
    Go to Tcode SMOD , Enter the Enhancement as MEREQ001 , Click on 'Documentation' and SAP has given an excellent step by step procedure on how to add a tab at item level.
    Hope it helps
    Regards
    Byju

  • Add another custom tab to sales crmd_bus2000115

    Hello Gurus,
    I cannot add another custom tab because it overwrites the old one. I've tried the transaction crmv_ssc but i think doesn't serves.
    Any suggestions.
    Thanks a lot.

    Hi Pablo,
    You shoudl be able to do it using Screen sequence control. I hope you are aware of possible issues of using CRMV_SSC.
    Refer to the thread.
    Re: Change of tabs in sales document layout
    Thanks,
    Surendar

  • Add new custom tab to SC item

    Hi all,
    I want to add a new custom tab to SC item.
    I've created an enhancement point within the component /SAPSRM/WDC_UI_SC_DOFC_D1 and I've added the new tab.
    The problem is that when I select this tab in the portal a message is displayed as following:
    "The screen component is unknown. The navigation must be canceled"
    By the moment the tab is empty, but I've tried to add a ViewContainerUI Element and I've added an embed view in the window, but the same message is still displayed...
    Do you know what i need to do in order to add this new tab?
    Thanks in advance.

    now, i am getting the data with the following sentence:
    DATA: lv_guid TYPE bbp_guid.
        DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
        lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
        lv_guid = lo_componentcontroller->mo_bom_sc->/sapsrm/if_cll_item_admin~get_lead_selection( ).
    Then I can use the bapi BBP_PD_SC_ITEM_GETDETAIL in order to get the data.
    Now, i want to SET this data with some modifications...
    Any idea?

  • How to add new custom tab to WZR1/2/3 at line item level

    Hi,
    Please explain how I can add new tab with custom fields at item level in SAP transactions WZR1/2/3. I am trying to use BADI WLF_ENHANCE_SCREEN_EX but somehow its not working. Please explain how this can be done ?
    Thanks
    Ullas

    Hi,
    We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
    *Determine Top WorkItem Instance
      if im_top_wi_id is initial.
       select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
         up to 1 rows
         where wi_rh_task = im_wftask and
               catid      = 'BO'      and
               instid     = l_instid  and
               typeid     = 'FIPP'.
       endselect.
       endif
    As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
    Thank you....

  • Add a custom field in IH01 and IH03 standard report selection screen

    Hi All,
    I tried to find any implicit enhancement to achieve but am unable to find any. My requirement is to add a check box at Explosion block in the standard selection screen of IH01 and IH03 report. Please help me with enhancement options available to achieve this requirement.
    Thanks in Advance.
    Thanks,
    Manesh.R

    Hi Manesh,
    I see the below implicit enhancment point provided at the end of report program.
    I think we can mention our custom code here, but I doubt whether we can edit or add fields to the standard selction screen block created.
    Please try this and share the results with us so that you also would be adding knowledge to others.
    I have attached the screen shot at which I am talking about the implicit enhancement.
    please let us know in case of any concerns.
    Thanks,
    Bhaskar

  • PR Header customer tab

    Hi
    I used user exit MEREQ001, it helps in enhancing a tab screen at item level.....but I want to enhance at header level.....
    the BADI me_proces_req_cust how is it helpful in this? as if i try to add a screen in the subscreens tab there it says it will generate the changes in cl_ex_me_process_req_cust, which is a std class...
    what should be done?
    Thanks

    I can use that BADI for adding a tab strip to header?
    How?

  • Custom Tabs in Risk Analysis and Remediation

    In the configuration Tab of the RAR, one has the ability to add 3 custom tabs. These custom tabs appear to the right of the Configuration Tab. The name which brings up the tab is appended at the end of the url as mentioned in the configuration guide. For example if you append "CCdebugger" the Debugger tab is appended.
    Does anyone know what other tabs can be added and how does go about finding the names of the tabs that can be appended like the one example shown above? The configuration guide does not provide any list of tabs that can be attached in this way. (Granted the maximum at a time is 3).
    Would appreciate your help and input on this.
    Thanks

    Hello Arun,
    You can add in custom tabs any webservice (webservices urls can be found in UME Web Services Navigator) or any other link even external (as a webmail or a google search bar!).
    You are free to configure your custom tabs according to your needs, but do keep in mind that custom tabs are common to all users!
    For information here are 3 tabs we have chosen to configure:
    debug mode : .../webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?debug=1
    CC Background deamon : .../sap/CCBgStatus.jsp
    Thread follow up : .../sap/CCADStatus.jsp
    Hope this helps,
    Kind regards,
    Sophie Planchais
    Edited by: Sophie Planchais on Sep 3, 2008 1:52 PM

  • The Custom Tab Width add-on doesn't work in Firefox 25

    I use the add-on 'Custom Tab Width' (https://addons.mozilla.org/en-US/firefox/addon/custom-tab-width) so that my tabs can shrink infinitely, but after updating to Firefox 25, it no longer seems to work. Is this add-on incompatible with Firefox 25? In that case, is there any other way to make the tabs shrink infinitely?

    Hi GAPa,
    Thanks for visiting Mozilla Support!
    This addon is indeed compatible with Fx25 as I have tested it. Try this. Press '''CTRL + SHIFT +A''' and click on '''Extensions''', then go into Options on '''Custom Tab Width''' then input '''1''' as MIN. Does that help?
    If not, feel free to reply and we will try other things to get this resolved.

  • Add custom tab in Asset Master

    Dear Experts,
    I would like to add a custom tab in asset master (AS01, AS02, AS03).
    I have read through the documentation for enhancement AIST0002, but still don't know how to do it.
    Can anyone please advise? Thanks a lot.

    Hi,
      If you have create a proj in CMOD and activated the screen the new tab should be avaliable if it is not it might need some customizing try like below:
    Transaction AOLK>>Select your Asset class click on General Assignment of Layout
    Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, ZSAP.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
    You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
    Then, save and come out.
    Now, go to tcode AOLK and assign tab layout ZSAP. for asset class 1000.
    check now.
    Regards,
    Himanshu

  • Add Header, footer and Margin programmatically in Adobe Acrobat 7.0

    I am using adobe acrobat 7.0 profesinal, We receive multiple PDF files then we have
    to add header and footers and also change the Megins in these files.
    Is this possible we can made these changes using Code written in VBA, VB6 etc.
    So my point is add header & footer programmatically using VBA and VB6.
    Is there need to access any APIs.?
    What I have to to for this purpose??
    Thanks in advance
    Aftab.

    Do they print if you chose to shrink to printable area in the printing options? I'm wondering if it's possible that your printer has a default border and the header/footer is getting cut off.

  • Rfx Custom Tab(Table) Value not mapping in Change Doc BADI

    Hi,
    I am currently adding Custom Tab with Table in SRM Rfx Webdynpro Screen SRM PPS 7.01 Extended classic . I did the configuration steps to add the custom table, visibility setups, created a new Webdynpro, enhanced in Component controller and could get current active instance Rfx values.
    In local memory using a class method i am exporting custom tab values to Change Doc BADI and updating the et_hcf with the custom values.
    The values are getting saved in the data base and i am able to get it via function module and show in the screen again.
    My Problem is when i am modifying a saved Rfx it saves the entry another time. When i debug the change doc badi i could see all the time the et_hcf and it_hcf is coming empty in the first place and each time the entries from screen are consider as new entries and getting saved in DB.
    I have created Custom tab with table in Contract screen, PO Header and shopping cart line item. Rfx screen is little different and not getting the et_hcf value again in Change Doc BADI. Do anyone have similar issue in handling Rfx.? Please help me. I can Change my code logic and fix this problem still it looks like a standard bug to me that et_hcf or it_hcf is not getting values to the change doc BADI as it does in PO or Contract. Also let me know if i need to check any of my configuration.

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

  • Custom TAB in txn WCOCO using Screen Enhancement(BADI Implementation)

    Hi,
    My requirement is to add a custom  tab with some fields in the Header in transaction WCOCO. I implemented the enhancement spot WCB_CC_VIEW_SPOT and the BAdi WCB_HEADER_DATA_TAB_I_BADI and am able to create the custom tab. All the details for the implementation are given in the BAdi's documentation.
    Now, I need to make this custom tab enable/disbale i.e., make it visible/invisible based on the Condition Contract type. I tried to handle this in the PBO of the subscreen (my custom tab is a subscreen, defined as per the BAdi documentation)... but commands SET/LEAVE Screen cannot be used in a subscreen, so unable to handle it.
    Any help on this is greatly appreciated.
    Thanks,
    Veeru.

    Hi Prosengit,
    I am not aure about u r BADI,
    BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
    IN thi senhancement u have thrre screen exits.In this enhancement
    SAPMM06E        0111 CUSTSCR1 SAPLXM06        0111 Subscreen: PO item
    u can add subscreen and u can add u r own fields here .
    and u can write u r code in 'EXIT_SAPMM06E_006'.
    if u want to change the title of the program.
    Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
    I hope this solves u r problem.

  • Adding a custom tab in Purchase Order with two fields - ME21N

    Hello Experts,
    My requirement is to add a custom tab with two fields in purchase order at header level.
    The BADI ME_PROCESS_PO_CUST is alreday implemented previously as there was one custom tab added previously in header.
    The structure  CI_EKKODB already have the custom fields for the enhancement done earlier.
    Now to add my additional tab how should i proceed ....should i put my additional fields in the same structure and write my code in same BADI.....will there be any impact on already done enhanecement.
    Please suggest in achieving this functionality.
    Thanks,
    Naveen

    Hi,
    Check this [wiki|http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29], it tells you how to do with an example for item data.
    Regards,
    Eduardo

Maybe you are looking for

  • View options in Mail (incl. Exchange!)

    For those with an Exchange account: When browsing emails in preview mode before double clicking to create a new window, the words are not wrapping and I cannot read the full context without first opening up the email in a separate window.  It doesn't

  • MAC OSX 10.9 and Java Web start

    Hello All , We are facing a warning when we tried to launch the JNLP on MAC using Java 1.7_45 . Warning message - "This Java Application will be blocked in a future Java Security update because the jar file manifest does not contain the Permissions a

  • ESS Change of Address REQUESTED process

    Hi all, I had ESS Change of Address working since 2003. Now, I am having issues. Don't know when something changed, but in last year. Any answers to any questions would be appreciated and if I need to clarify, by all means, let me know and I will bre

  • My iBook is out of order

    my iBook is out of order, the technician says: the logic does not function. he says you have to buy a new logic or to throw the computer. what I can do?

  • HT201364 I have a macbook air bought in 2008 and am unsure if it can be upgraded to maverick.  Is there a serial number beyond which it is OK?

    I have a macbook air bought in 2008 and am unsure if it can be upgraded to maverick.  Is there a serial number beyond which it is possible to upgrade?  I know that first I need to upgrade to mountain lion or some other fierce cat. The model identifie