APO Cube data is not showing in Planning Book

Hi All,
          Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I don’t see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I don’t see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and don’t know much on APO.Present status i see the data in APO cube and not in Planning Book
Thank you
Arya
Edited by: karan s on Apr 3, 2008 8:58 PM
Edited by: karan s on Apr 3, 2008 8:59 PM

Hi karan
have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

Similar Messages

  • Data selection not showing in Planning book

    Hi everybody,
                We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
    Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
    thanks
    arya

    There might be few things you should probably check
    1) In the planning object structure just activate the POB. through the context menu.
    2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
    3) Create time series to the PA or perform initialization of the PA.
    4) Try creating a CVC manually and see if it allows to create.
    Atleast now you should be able to see the key figures in the Planning Area.
    Let me know if it works.

  • Diffrence in data between the datasource and planning book

    Hi All,
    I have loaded the historical data from an infocube into my planning area then i generated the forecast. In our planning book we have provided some keyfigs like market intelligence etc.,. i have written a macro to add the baseline forecast and market intelligence and saved into a seperate keyfigure, i have defined the macro as a default macro and the macro execution is at "details only". everything is working fine in my planning book.
    After extracting the data from my planning area into a datasource, the data is not matching between planning book and the datasource <b>only for the keyfigures which i have written macros.</b>
    Please let me know where i have gone wrong and what are other settings to be made to replicate the same data into my datasource.

    Hi,
    Please note that system never execute the macro while extracting data from planning area to infocube.If you want that data to be saved it is
    necessary to copy the values to a "non-calculated" liveCache keyfigure.
    Each time, you will reenter in the planning book, the new value
    calculated will be displayed, it won't be the real current value
    from the livecache, it is not inside until you saved.
    If you don't save this result, this  is only visible on the grid but not
    in the planning area and livecache.
    Everytime planning book is opened the values for keyfigures which is calculated from macro are re-calculated. If you save these values and
    immediately afterwards extract the data, those numbers will be the
    same. However, maintaining new values in the planning book without
    saving would result in "differences" ...
    A DEFAULT macro is also launched while starting the Planning book.
    Please read carefully the note #674238.
    Regards,
    Sunitha.

  • Why APO transaction data is not stored in tables

    Hi All,
    Why APO transaction data is not stored in tables.
    can u explain me.
    Babu

    Good question Babu,
    There indeed are tables for master data in APO database whereas the transaction data (qty, amount, dates and document numbers) are stored in a denormalized data base called livecache. But the master data too is identified with GUID's.. a cryptic and unique number given to e.g. a location, prodcuct, t/lane, customer and documents. This is because of speed of access if e.g. an external system is to fetch an information from APO using a unique session ID, instead of making a sequential read in APO tables, it read the live cache by called the GUID's that the calling characterics of the event. If one or more ECC system or an external execution system is connected to APO and one of the system collapses and rebuild again or if a system is assigned to a new business system group etc.. then its likely that systems can be out of sync and its where the live cache syncs up the data with APO tables again. If you still want to see tables in human readable format.. there are views available e..g the tables for locations LOCID and table for products MATLOC would take only GUID as inputs but the view V_MATLOC will show you the materials and locations by the numbers you know.
    Hope I was able to explain. But yes the why part is still something of a mystery to me.. becasue with transparent tables it is easier to create local reports in APO and thats what probably SAP doesnt want. SAP can answer best as to what were the initial user and commercial considerations when developing APO
    Regards,
    Loknath

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • Why the basic finish date is not adjusted in planned orders

    Hi, all.
    Can anybody help me to understand:
    "Why the basic finish date is not adjusted in planned orders during
    forward scheduling, but in production order basic finish date is adjusted?
    It is look like non-coordination between groups of developers.
    And lead to situation, when planner don't see in MD04 when he can really wait material receipt. He must go to planed order and check production data there, it's unusable."
    Am I right, or SAP have it's own logic.

    Hi,
    Production orders are different story. Since production order is a constant element, they are not created in the course of MRP, basic dates can be adjusted. In production order basic finish date is adjusted, but you won't see for the upper level materials', basic dates of the planned orders adjusted according to the prodcution order you create. Production order is consistent within itself in terms of date and is not dependent to other elements of MRP, but planned orders are not like that.
    MRP creates planned orders whose basic finish dates are calculated by subtracting goods receipt time from production start date of the source of requirement. MRP works backwards without changing directions. Meanwhile if any production finish date is calculated different than the basic finish date due to forward scheduling, in order not to violate the alignment between the basic finish date and source of requirement's start date, basic finish date is not adjusted. If it was, dates of all the planned orders calculated so far at the upper levels of the BOMs had to be recalculated, otherwise all the consistency of all the dates is violated. This cannot be done because changes in any level affects all lower levels.

  • Time of email shows in Date Column, Date is not showing on new emails

    Date is not showing in Date column. Only time is showing.
    I just migrated from OE - Old emails show the time & Date.

    If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

  • Due date is not showing up in UWL

    Hi ,
    Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
    I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
    I really appreciate your help.
    Regards
    Mark

    Hi,
    As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
    Regards,
    Karri

  • Data is not showing up in report on ODS

    Hi All,
    we have requirment like below
    we have an ODS  no update rules and nothing with 5 fields . with bex reporting flag checked..
    we have function module to fill the data for these 5 fileds in  ODS active data table .
    So data is there only in active data table that table was filling  by using  function module.
    so i need report that data .when i created and run the report data its not showing up.
    Please let me know whats the issues is and how to handle.
    I appreciate your help
    Regards,
    Sirisha

    In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
    thanks.
    Wond

  • BizTalk BAM Data is not showing

    In BizTalk 2010,  BAM Data is showing correctly.
    But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
    Event Log shows not any error.
    What I have to check for getting BAM data in 2013 ?
    Which configurations should I check ?
    Any kind of help would be appreciated.
    Prakash

    Prakash,
    There are two parts to it:
    Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
    Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
    If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
    If event log is clean, no data in
    TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step  which is deploying the tracking
    profiles may not have happened properly.
    Check the following article for help:
    Deploying and Undeploying Tracking Profiles
    How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Upload data from Excel to the Planning Book

    We are on APO 5.1. We have APO DP at the moment. I wanted to test upload of data from Excel to the planning book. I have tried several times. I have been unable to see any changed data in the planning. I do not get ANY errors during the upload. But I cannot see any changes that I made in the excel in the planning book. Please let me know what I am doing wrong. These are the step that I follow.
    1. Go to planning book.
    2. Short list only one key figure e.g Customer Forecast.
    3. Go into Details All mode.
    4. Download the file using the "Prepare File for Upload" option.
    5. Open the saved Excel.
    6. Change the values in the excel , save and close.
    7. Upload the excel into the planning book using the upload file option.
    I do not get any errors during all these steps. However, when I check to see if the values have been updated, the changes made in the excel are not updated in the planning book.

    Hello,
    Instead of selecting one key figure in data view, please select all key figures of the planning book and then try all the steps which you have carried out.
    please revert after you carry out this.
    Regards,
    Prafulla

  • Function module to read/write notes in the planning book

    Hi All,
    Can you guyz tell me the FMs to read / write NOTES in the planning book. Notes as in you can right click on a cell of PB and do display notes.
    win full points for the answer.
    Thanks - Chandan

    Check FM /SAPAPO/MSDP_NOTE_WRITE and Use of APO BAPIs page in SCM Wiki.
    Thanks,
    Somnath

  • SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

    Hi All:
    I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books)   I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) .  I could ony see the SAP supplied PB there.  Will SDP94 transaction display only the standard SNP Planning book?  How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
    pl. help
    Thanks
    Ryan

    Hi Narayanan,
    a couple of simple checks..
    can you please check that you have not set a filter critera in the shuffler in planning book/data view?
    you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
    else you may want to check note : , 327371
    Let me if this helps.
    Rgds, Sandeep

  • Data is Not saving in Planning Workbook

    Hi,
    We have created workbook on top of aggregation level and used SAVE pushbotton to save workbook data .
    in Integrated Planning when we are trying to  click save button the data is disappering and showing query exceuted without errors.can anybody suggest the reason.
    Thanks in advance
    Phani

    Hi Phani,
    Are you getting input-enabled cells in the workbook to enter data or not.
    You can find out by Right mouse click and then in the context menu you should see the option
    'transfer values'.
    If this is not coming then your query is not input-ready and so the data is getting disappeared while saving as
    the cells are not in dat entry mode.
    You can even test this directly for the query on which u created  workbook.
    You can test the query in RSRT transaction and should see that cells should be input-ready.
    Regards,
    Amit

Maybe you are looking for