Apps report cannot display 12 month column

I have done report using Matrix with Groups. When i ran it in oracle reports it displays 12 month period. After i put in apps and run it the report will show up to 7th column(7th month). I am using Landscape 13 and 9 in reports. In the concurrent program i chose Landwide.
Pls help to suggest what i did wrong. How can i display all the 12 columns.
Edited by: user10743484 on Aug 31, 2009 9:57 PM

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Similar Messages

How to display 3 month columns and YTD column

Hello,
I need a help. My report layout requires to display the data in 3 dynamic month columns and one Fiscal year Year-to-date column for a period of time. For example, ending month is FEB:
Items : DEC : JAN : FEB : FY YTD
A : $10 : $11 : $12 : $100
B : $1 : $2 : $3 : $10
(Note: FY YTD is the total sum from OCT to FEB (5 months), not 3 months to be displayed)
I tried to create a query and use Matrix with group, but the report always display five (5) month columns
from OCT to FEB instead of displaying three (3) month columns. If the query is limited to display
three months as desired, then the total sum will be 3 displayed months only (instead of 5 months).
How to create a query or how to display three months and FY YTD or do anything else with Oracle Builder9i?
Thanks,

You could use the DECODE function and variables
i.e. have a four column report
in your query use somthing like
, decode(period,:P_PERIOD1,1,0)* amount as period1
, decode(period,:P_PERIOD2,1,0)* amount as period2
, decode(period,:P_PERIOD3,1,0)* amount as period3
, amount as ytd
In your before report trigger poulate the variables with your required values

Cannot display all the columns

Hi
I am having this weird problem , i gave some selected columns in my select query and data displayed with the given conditions perfectly then i added some more columns , around 30 coloumns to my select query(initially i just tested by selecting 6-10 columns names) , and my report does not display data for all the columns , its just displaying the data for columns i previously selected , do i need to do something to get all the columns, is there a limit in Apex that report should display only fixed number of columns ?or do i need to refresh any where in order to adapt the changes i have made in my select query ?
i have logout and logged in , but it did'nt work..
Could any body please let me know what could be the reason for this?
Thank you

Just found out that the other columns were selected as Not Display in report in actions ->select columns...

Interactive report conditional display of link column - apex 4

I create an interactive report
select object_id,
       object_name,
       case
        when mod(rownum, 2) = 0
        then 'block'
        else 'none'
       end display_link
from user_objects
where rownum <= 10in the Link Column for the report I selected one of the edit icons and put the following in the link attributes
style="display:#DISPLAY_LINK#"I also edited the object_id and set the Column Link and selected an edit icon and put the same style in the link attributes.
The link under the column displays correctly but the link for the report does not seem to substitute the #DISPLAY_LINK# from the report. Any Ideas?

Here's how I've done this:
SELECT ORG_ID,
       CLEARER_NAME,
       LEGAL_NAME,
       MARGINING_ACCOUNT,
       RULE_GROUP_DESCR,
       VIOLATION_COLOR,
       VIOLATION_LEVEL,
       CASE MARGIN_IND
        WHEN 'Y' THEN '&nbsp'
        ELSE '<a href="#" title="Ignore This Alert"><img src="/i/ice/images/hide.png" alt="Ignore"></a>'
       END AS IGNORE_LINK,
       ....This takes care of either showing (or not showing) the link.
IN order to process when it is present, not that the address is "#" This will cause your cursor to change to a hand (or whatever your pointer is) when the mouse floats over the link. The actual transfer to the next page, I handle with jQuery/JavaScript.
Create a Dynamic Action.
Event: Click
Selector Type: jQuery Selector
jQuery Selector: 'aalt'
Event Scope: Live
(note that the jQuery Selector is finding the alt attribute that I set on my link in the SELECT above . Tweak as needed.
This "Action" for this DA will be to "execute JavaScript code"
Normally, I would set some values into Page Items and then create a branch to pass this values to the next page. I am doing the same thing in the following code. I am getting the values off of the row wherein the user clicked on the link. I am setting these values from the row into the page item values. Then, I am submitting the page. All the "htmldb_Get" business is just stuff that I have to do to get the page item values into the session (so that I can pass them to the next page).
var clickedRow = this.triggeringElement.parentNode.parentNode.parentNode;
var ruleGroupDescr = $(clickedRow).children('td[headers="RULE_GROUP_DESCR"]').html();
var ajaxRequest = new htmldb_Get(null, $x('pFlowId').value, null, 0);
gReturn = ajaxRequest.get();
$s('P31_RULE_GROUP_DESCR', ruleGroupDescr );
ajaxRequest = null;
var clearerName = $(clickedRow).children('td[headers="CLEARER_NAME"]').html();
var ajaxRequest = new htmldb_Get(null, $x('pFlowId').value, null, 0);
gReturn = ajaxRequest.get();
$s('P31_CLEARER_NAME', clearerName );
ajaxRequest = null;
apex.submit("IGNORE");Finally, just create a branch to the next page and set the items on the next page to the ones on this page that are being set in the above script. Note that in my example, I have set the request to "Ignore" when I submitted; so, I set the condition of my branch to be Request = IGNORE.
Hope this helps,
-Joe

Why my app store cannot display iPhone App?

I am using iOS 6
When I try to search an App, it can show me the result in iPad App Section. But when I go to iPhone App section, it have nothing. It is fine if it really don't have any iPhone App, but it still show i got 751 result.
When I go back to iPad App section, it have nothing too. I need to search again. What is wrong with my App Store?

That is her standard answer to this known problem. And it is not a bug!
You have a pirated app that is from the MAS and the app has been cracked with the MAS receipt from an app acquired with this person's MAS account. Get rid of your pirated apps to get rid of the issue.
Whichever was that last app that you downloaded for free from somewhere, rather than paying for it in the MAS, is likely the culprit.

Cannot display more than 16 significant digit numbers from Oracle

The WebI Report cannot display more than 16 significant digit numbers from an Oracle data type field.
This occurs for both an ODBC and native driver connection to Oracle.
The data is defined by Number Data Type in Oracle, and view correctly in Universe, but display incorrectly in WebI report which created by InfoView.
I know BOE XIR2 has this behavior, but it seems that XI3.0 and XI3.1 also have this problem.
If this behavior in XI3.0 and XI3.1 perform by design? or it's a bug? and Why?
Thanks!

Hi Sarah,
Precision limitation of a Web Intelligence filter constant :
In an Oracle database, a Number field type can store up to 38 digits. When creating a Web Intelligence report in the Java Panel, a condition is specified for this field (that is represented in the universe as a number), and a constant number is entered for its value, only up to 15 digits of precision are retained.
For example, if 1234567890123456789 is entered, the value becomes 1234567890123460000.
Or, if you have a column in database which has a number like 123.123456789012345678 it will display only 123.123456789012.
Cause
The reason for this limitation is that Java Panel represents a number internally as a Double field type with only 15 digits precision. This is by design.
Resolution
The only workaround is to change the field type to a Character field; however, doing so means losing the ability to perform calculations and/or sorting on the field.
This issue has been raised as an Enhancement Request and given Track ID # ADAPT00908702.
Regards,
Deepti Bajpai

Display current month records only

Hi Experts,
I have the following requirement.
Report should display current month records only.
For example If the report is run on 20090324, It should display records from 20090301 to 20090324.
That means, report may run on any date of that month, It should display from 01 (of that month) to current date.
I have a select statement saying
SELECT * FROM likp
WHERE wadat_ist BETWEEN month_start_date AND sy-datum
    AND vkorg IN s_vkorg
    AND vkbur IN s_vkbur
    AND kunnr IN s_kunnr.
How to calculate date for month_start_date, so that it can display only current month records.
Thanks in advance
Rohan

Hi Kunta, Suhas, Nandi,
Thank you for your quick reply, I really appreciate it.
for this current month records, I need to display a check box saying
Open orders and shipments with the current month.
But where as Selection text is accepting 32 characters only. Is there any possibility to overcome this?
Thanks in advance
Rohan

Explorer Cannot Display Web Page Desk Top 3000J1157387-A11

Originally worked fine displayed web page withOUT a problem FOR OVER A YEAR. Starting in Jan 2008 (just after warranty EXPIRED) it just reports "cannot display web page" Using my Xp computer I can get all of the web pages to respond.
Using internal checks on the Lenovo 3000J it reports everything is OK.
I can receive updates on this computer and just today I installed all updates through 4/20/2008. Windows Upgrade works fine on the Lenovo. However I cannot access the web otherwise. I am typing this message on my Xp. Computer because I have not been able to get a webpage to display on the Lenovo
I want to stay with Vista Home Premium however HOW CAN I GET THE WEB PAGE TO DISPLAY ?
VIC
Message Edited by vicflack on 04-20-2008 10:51 AM

Thanks for the helf. I disabled the firewall which is norton. and then rebooted still not able to display the web-page. However I may have gotten closer to the problem.
When I select "Properties" from the file menu on the "Cannot display page" I get the following address:
res://ieframe.dll/dnserror.htm#http://www.yahoo.com
Of course it cannot display this page because it does not exist. The page I tried to load was http://www.yahoo.com when I select this page on my Xp computer it loads correctly and under file- properties -address http://www.yahoo.com and all is well with the world.
For some reason on my Lenovo Vista Home Premium Computer Internet EXployer is inserting
"res://ieframe.dll/dnserror#http://www.yahoo.com
Thanks for any help
Vic

Application designer issue - Cannot display image preview

Hi guys,
When I attempt to use an image icon as the label for a pushbutton,
I receive this message in App Designer:
"Cannot display image preview.
The ImgDisplay ActiveX control may not be properly registered. Use the
Install Workstation functionality of Configuration Manager to register this control"
Anyone has the same experience on it ?
Thanks in advance.

What OS is your workstation running on?
Which PeopleTools version are you running?
Are your an administrator on the workstation?
Did you try Install Workstation from Configuration Manager as stated in the error?

RESOLVED : Windows Phone – Download/In-app reporting fix begins tonight

Update 4/2/15: The processing is complete. The below issue is resolved.
We have identified some download and in-app purchase transactions that were not appearing in the Windows Phone Dev Center dashboard for the November to present timeframe.
We will start the process to add these transactions back tonight. The process will be completed in approximately a week.
Please note the following:
We will add data one month at a time. The most current data will be processed first (March 2015) and then work backwards to November 2014.
As each month is processed, you may see increases in your download/in-app reporting numbers for that month.
You will not lose visibility into any data.
Transactions will continue to be shown in the Windows Phone Dev Center portal, while in parallel, we will add back the historical data.
Only some developers were missing transactions, so you may not see any changes in your download/in-app numbers.
This issue only impacts
Windows Phone download/in-app numbers. Windows Phone payout data, and Windows data is unaffected.
We will update this post when the process is complete.
Thank you,
Patrick

Hello,
Skype for Windows Phone 7 has been discontinued and stopped working. Please read this:
https://support.skype.com/en/faq/FA34489/is-skype-for-windows-phone-7-being-discontinued
Skype für Windows Desktop: v7.4.x.102
Skype für Mac OSX: v7.7.335
↓ Did my reply answer your question? Accept it as a solution to help others. Thanks! ↓
↓ Hat mein Post deine Frage beantwortet? Akzeptiere ihn als Lösung, um anderen zu helfen. Vielen Dank! ↓ .

CANNOT DISPLAY A WORD/EXCEL DOC IN BLOB FIELD INTO A PDF REPORT

We created a report that should display several kinds of documents at one time.
These documents are stored in BLOB columns in database. We had no problem to
display txt, gif or jpeg, but we could not display doc, xls, pdf or html
documents.
In this report we set three different fields in which display different kinds
of documents depending on mimetype. The first field has FileFormat property set
to 'Text' in order to display 'text/plain' and 'text/html' mimetype documents.
The second field has it set to 'Image', which allow to display 'image/bmp',
'image/gif', 'image/x-png', 'image/pjpeg' mimetypes. The third field has this
property set to 'OLE2', and here is where we would like to display other
mimetype documents as 'application/msword', 'application/vnd.ms-excel',
'application/pdf'.
We run the report on the web using:
http://<server>:<port>/dev60cgi/rwcgi60
?server=<report_server>
&report=<rdf_name>
&destype=localfile
&desname=<report_name.pdf>
&userid=<user>/<password>@orcl9i
&desformat=pdf
<6meters>
I have already read a lot of notes in Metalink but I could not find any
solution. Is there any way to display a Word/Excel document from database in a
report?
We tried to convert Word/Excel docs to html format, but when we tried to
display an HTML document in the report, we found that Oracle Reports displays
the source code instead of the HTML format document. So, this did not work.
What can we do?
We also read somewhere that a possible solution would be to convert Word/Excel
documents to a common format like GIF, JEPD or PDF. If processed as gif or jped
the file could be displayed in the report. If processed as pdf the document
could be linked in the report.
I tried to display a PDF in the report but a blank box is displayed. How can I
do this too?
Any solutions?

Hi,
I have the same problem. I need to show up a BLOB, word file(.doc), in a custom report. I made a simple query, extracting file_date( the column having the blog (.doc) file) from the database, in the report and placed it on a layout by assigning it to a field "F_1". I addressed the file format as OLE2.
But when I run the Report in APPS, it shows up an error "REP-1814: Report cannot be formatted. Object 'horizontally and vertically' can never fit within 'F_1'.". I also played with the layout by changing its size but the response had no change.
I am using Reports6i and the output format of the report is PDF. Is there a way to resolve the issue? Please share the solution if you have any for this.

Interactive report column filters to display differently than column values

Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.

Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt

How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

Hi,
i have a dimension table with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20) and a fact table with columns (month_key ,measure_types, Amount)
My requirement is to create a power pivot report in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
, month name should be populated with months till june 2013 only .
i tried creating calculated column"END DATE " in the fact table with dax expression to calculate the 18th monh from the current month as below
month_key END DATE
201201       201306
201202       201307
and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using excel 2010
..hence could not do any calculation on the report side also. please suggest .
Thanks in advance

Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
The first is trivial as driezl has suggested.
The second will require a second calendar table.
I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
18 Month Measure:=
CALCULATE( [Measure]
, FILTER( DimDate
, DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
&& DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
Please review this example along with the workbook I have linked above.

Need to display "Calendar Month/Year" at report level from Calendar Day

Hello Experts,
I have a scenario in which I have 0CALDAY (e.g. 01.01.2009) along with other fields available in my report. My requirement is to display "Calendar Month/Year" (01.2009) in my report. Is it possible to have "Calendar Month/Year" in my report from 0CALDAY, by making changes to the query, as I cannot remodel the underlying InfoCube.
Many Thanks,
VA

What you mean with huge - 100 Mio dataset?
The import of the new infocube will be also take a long time - the database must be insert a new field for every dataset.
=> is this a big infocube, then don't use virtual infoobjects.
=> on a big infocube is important to have a good datamodel - please insert always all 11 infoobjects for the time dimension.
Sven

To Display "Calendar Month/Year" at report level from Calendar Day

Hello Friends,
I have a scenario in which I have 0CALDAY (e.g. 01.01.2009) along with other fields available in my report. My requirement is to display "Calendar Month/Year" (e.g. 01.2009) in my report.
Is it possible to have "Calendar Month/Year" in my report from 0CALDAY, by making changes to the query, as I cannot remodel the underlying InfoCube?
Many Thanks,
VishwA

HI Vishwa,
Hope it will helps.
How to get month from CREATE DATE field??
Regards,
SVS

Apps report cannot display 12 month column

Similar Messages

Maybe you are looking for