Audit Log
Hi
We are doing a file-to-file scenario without content conversion. That means we did not set up any interfaces in the repository but created a so called u201CgenericInterfaceu201D in the Configuration. This leads to a scenario where the file will just be taken and dropped from and to a file server without any conversion.
We are facing know a problem in the Audit Log in the RWB. The file sender adapter shows the audit log until the file has been successfully taken. On the receiver adapter we will find exactly the same message number but no further audit log. It is not possible to navigate into the audit log on the receiver adapter. In the message monitor of the RWB the message will not be displayed.
We already checked the settings messaging.system.statusLog in the SAP XI AF Messaging service in the visual admin.
Does anybody know this problem?
Regards Oliver
Hi,
please refer this SAP Note 751915.
this may be help you.
regards,
bobby
Similar Messages
-
SharePoint 2013 audit log unexpected error
In one of my SharePoint 2013 site collection, when i try to save a audit log, i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below.
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xC33B005
2jtj Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Unified Logging Service c91s
Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtk High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtq High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jx8 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s03 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s02 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jw0 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General 8nca
Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Runtime tkau
Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在
System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)
在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)
在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server.
Logging Correlation Data
Medium
Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
Authentication Authorization
Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
Logging Correlation Data
Medium
Site=/
Information Rights Management
Medium
Information Rights Management (IRM): Requesting user is System account.
Files
High
UserAgent not available, file operations may not be optimized. 在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
disposeIlb) 在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) 在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound) 在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) 在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
在 System.Web.UI.Page.ApplyMasterPage() 在 System.Web.UI.Page.PerformPreInit() 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) 在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) 在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
Files
Medium
Spent 0 ms to bind 29783 byte file stream
Monitoring
High
Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
Monitoring
High
Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
OpenXml
Medium
OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
General
Medium
Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean
disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Runtime
Unexpected
System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
General
High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close()
在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest()
在 System.Web.UI.Page.ProcessRequest(HttpContext context) 在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) -
Audit Log Report not display and error is "Report Contents No data"
Dear All,
i have reuired the audit log report but when i am click the Site Action->Site Setting->Audit log reports->Run a custom report-> select the day and option and click ok the i have received the error
Please help me please check below screen shotCan you please confirm that you have configured events to audit?
Configure
audit settings for a site collection
Here is step by step how to configure audit setting.
http://anthony-verschraegen.blogspot.ca/2013/04/sharepoint-2013-configuring-audit.html
Amit -
Issue with Audit Log report in SharePoint 2010
I have enabled REPORTING feature at site collection level and configured the site collection audit settings. I tried to generated Audit log reports, most of the time it keeps on processing as shown in fig.It
keeps on processing, never comes to report generated successful message. how to overcome this issue?i'm facing same issue, even when i tried to generate report for limited limited period(5 days) for a particular event(ex: delete or restore items (or) edit items).
I think, the below reference may guide you solve your issue
http://sharepoint.stackexchange.com/questions/17151/how-often-should-the-auditing-log-be-cleared-to-not-affect-performance
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Not able to generate "Audit Log Tampering report"
Hi,
I am not able to generate the Audit Log tampering report in version 8.0 of Sun Identity Manager. I am encountering the following message when I am trying to generate the report.
"Tamper-resistant logging is disabled. Unable to verify the integrity of the audit logs." I did not find any option to set the tamper-resistant logging feature in version 8.0 of Sun Idm.
In version 6 there is an option to set the tamper resistant audit log box by "Enabling tamper-resistant audit logs box" ( Please refer: http://docs.sun.com/source/819-4483/auditing.html)
The generated report (in version 6) did not show any data inspite of me deleting a row in the audit log.
I hope you can help me with this problem. Thanks in advance
Regards,
Sharon1) It shouldnt matter, but try
destype=file (FILE small case)
2) In builder, in property pallette see if you have given any "initial value" for these parameters (especially desname, destype etc) ?
3) Do not give "batch=yes" in command line and try
Thanks
Ratheesh -
Write to audit log from Axis Handler
Hi guys,
Using PI 7.11 SP 04 I have deployed the com.sap.aii.af.axisproviderlib.sda containing the libraries for Axis.
This is deployed fine and I can write my Handlers without trouble.
There is only 1 issue bugging me and that is the writing to the Adapter Audit Log. In SAP Note 1039369 FAQ XI Axis Adapter it is described how to write to the Audit log.
I can successfully write to the Channel monitor. But when I try to write to the Audit log data is still just written to the Channel monitor and not the audit log.
So what I have done is:
StatusAgent sa = (StatusAgent) getOption(Constants.MONITOR_AGENT_KEY);
Hashtable ht = getOptions();
ht.put("audit", Boolean.TRUE);
ht.put("pivoted", Boolean.TRUE);
sa.reportEvent(Status.OK, "This should be written to audit log but is written to channel monitor", ht);
sa.reportEvent(Status.ERROR, "This should also be written to audit log but is written to channel monitor", ht);
If i print the content of my hashtable in the channel monitor I can see that my entries are put into the table just fine. The 'audit' entry just seems to be completely ignored.
Anyone have and suggestions?
Regards,
DanielHi Guys,
I need to know what JAR file i need to download for the following packages from SAP PI.
import com.sap.aii.axis.monitor.Status;
import com.sap.aii.axis.monitor.StatusAgent;
import com.sap.aii.axis.utils.Constants;
I am doing AXIS custom modules and i need to write to the PI 7.1 Audit Logs.
Thanks in advance.
Raj -
How to schedule a batch job to generate security audit log (SM20)
May be this is a repeat question for this forum. Apologize, if it is. Is there a way to schedule a batch job to generate security audit log (SM20) automatically and possibly send a message to SAP Inbox or generate a spool request? Release is 4.6C.
Regards
Nirmal> May be this is a repeat question for this forum. Apologize, if it is.
You don't need to apologize. You only need to do a very simple search...
> Total Questions: 18 (16 unresolved)
Perhaps 16 of those 18 questions you have not followed up on could have been spared as well?
Please do the needfull.
Cheers,
Julius -
"logon time" between USR41 and security audit log
Dear colleagues,
I got a following question from customer for security audit reason.
> 'Logon date' and 'Logon time' values stored in table USR41 are exactly same as
> logon history of Security Audit Log(Tr-cd:SM20)?
Table:USR41 saves 'logon date' and 'logon time' when user logs on to SAP System from SAP GUI.
And the Security Audit Log(Tr-cd:SM20) can save user's logon history;
at the time when user logged on, the security audit log is recorded .
I tried to check SAP GUI logon program:SAPMSYST several ways, however,
I could not check it because the program is protected even for read access.
I want to know about specification of "logon time" between USR41 and security audit log,
or about how to look into the program:SAPMSYST and debug it.
Thank you.
Best Regards.Hi,
If you configure Security Audit you can achieve your goals...
1-Audit the employees how access the screens, tables, data...etc
Answer : Option 1 & 3
2-Audit all changes by all users to the data
Answer : Option 1 & 3
3-Keep the data up to one month
Answer: No such settings, but you can define maximum log size.
4-Log retention period can be defined.
Answer: No !.. but you can define maximum log size.
SM19/SM20 Options:
1-Dialog logon
You can check how many users logged in and at what time
2-RFC login/call
Same as above you can check RFC logins
3-Transaction/report start
You can see which report or transaction are executed and at what time
(It will help you to analyise unauthorized data change. Transactions/report can give you an idea, what data has been changed. So you can see who changed the data)
4-User master change
(You can see user master changes log with this option)
5-System/Other events
(System error can be logged using this option)
Hope, it clear the things...
Regards.
Rajesh Narkhede -
SOAP error in audit log of message monitor
Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhatgo to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps -
500 Internal Server Error - Channel Monitoring Audit Log
Hi Experts,
We are facing an error in the 'Audit Log' of the communication channel monitoring of a File Sender Adapter.
The channel uses a custom written Java Module which uses XSLT parser internally. The audit log displays the following error:
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: "The WebApplicationException log ID is [4698F300D2C40C2000000000000009AA]."
This error occurs both when the file is processed successfully or when in error. In case of a positive test case file, we can even see the message reaching Pipeline (SXMB_MONI). But only the audit log does not show the processed steps in the channel monitoring and displays the above error message.
We have even established that the cause of the error is Java Module (First, we executed by removing our custom Java Module from the module steps and the audit log showed the steps correctly. But by putting the module back in the channel, the error resumed).
Initially, the error was not coming and we were able to test this properly. But over the time the audit log error started. Now, we are not able to get rid of this even by restarting the channel or restarting the Java stack of the server.
To me, it seems like a memory issue in the Java Stack.
Any thoughts?
Can we find out where to find the details of the WebApplicationException log ID displayed above?
Thanks,
SudheerHello,
This could be generic but may helo you:
500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Regards,
Caio Cagnani -
BOE XI 3.1 Removing Audit log files
Hi there experts,
we have an issue with our production BOE install (3.1 SP7) whereby we have over 39,000 audit log files awaiting processing in the BOE_HOME/auditing folder. These audit files were generated a few months back when we had an issue with the system whereby thousands of scheduled events were created, we are not sure how. The removal of these events has had a knock on effect in that we have too many audit files to process, ie the system just cant process them all quickly enough.
So my question is can we just remove these audit files from the auditing directory with no knock on effects as we dont need them loading into the audit database anyways as they are all multiples of the same event.
As an aside when we upgraded from SP3 to SP7 the problem went away, ie no new audit files for these delete events being generated. We are still to establish how/why these audit events were created but for the time being we just want to be able to remove them. Unfortunately as its a production system we don't want to just take a chance and remove them without some advice first.
thanks in advance
ScottIs your auditing running now? Or still pending? Can you check in Audit DB, what is the max(audit_timestamp? This will tell you when was the recent actvitiy happened.
Deleting the audit files, will not harm to your BO system. You will not be able to see auditing details for that period.
Is the new auditing files are processed? or you still see the files created in auditing folder without processing?
If the auditing file size shows 0 okb, than it means they were processed. -
Usage Report and Audit Log report showing different totals
I am trying to understand the differences displayed in two similar reports. The first report is an 'Audit Log' Report and it is displaying the number of Resource Account creations over a time period. The second report is a Usage Report using the exact same criteria (objectType = Resource Account and Action = Create). The totals I get back are VASTLY different. Can anyone explain? Is this a known bug?
Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi -
An error occurred while trying to access the audit log
Hi I have run Set-Mailbox ian.shapton -AuditOwner Update, Move, MoveToDeletedItems, SoftDelete, HardDelete
I then created and deleted an email and ran Search-MailboxAuditLog -Identity "ian shapton" -LogonTypes Owner -StartDate "12/21/2014 12:00" -EndDate "12/21/2014 13:00" -ShowDetails
I see An error occurred while trying to access the audit log. For more details, see the inner exception.
+ CategoryInfo : NotSpecified: (:) [Search-MailboxAuditLog], AuditLogException
+ FullyQualifiedErrorId : [Server=Mailbox01,RequestId=07f17915-f25d-4fd5-b23e-f07a2482f4a4,TimeStamp=21/12/2014 16:45:39] [FailureCategory=Cmdlet-AuditLogException] 255D6156,Microsoft.Exchange.Management.SystemConfigurationTasks.SearchMailboxAuditLog
MSExchange CmdletLogs shows Microsoft.Exchange.Data.ApplicationLogic.AuditLogServiceException: The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired','The search operation could
not be completed within the allotted time limit. Please try to narrow down your scope to reduce the result set.'.
I am a Recipient Admin and Org Admin and can search other mailboxes using -LogonTypes Delegate
Any idea what I am missing here?
shapiHi,
I have the same problem when I run the Search-MailboxAuditLog command. It has been working for 2 weeks but suddenly after moving databases from one datacenter to another and back again it stopped working. The account running the command
is in all necessary roles needed.
This is what I have tested after it stopped working:
- Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) = Works
- Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) -showdetails = does not work and comes with an error.
"The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired',
'The search operation could not be completed within the allotted time limit.
Please try to narrow down your scope to reduce the result set.'."
This is very bad for us because we use a lot of shared mailboxes with delegates and want to report delegate action on these mailboxes.
Environment:
- 3 datacenters
- Exchange 2013 CU7
Thorir
thorir -
I got warning in audit log but I don't get any alerts...
Hello,
I have File Adapter sender with FCC.
Because I was curious how FCC will behave when invalid file is used as a source file.
I deleted much of the contents in the source file and the File adpater with FCC read it.
In communication channel monitoring in RWB, I got this message in Audit log.
"Empty document found - proceed without sending message".
However, I cannot find this message anywhere else... Either in Message Monitoring (RWB) or SXMB_MONI (SAPGUI).
Also, I don't get any alerts.
How do I get alerts when file is not processed by file adapter?
Also, how do I view alert view for this kind of error?
Thank you.
-WonHi Won,
I suppose that you have checked alredy that your alerts are setup correctly and rules are defined for it.
First, you might set the log level of the file adapter to debug - you should see the issue in the NWA log.
Should PI try to generate an alert but fails, you would also see it here and locate your problem.
But, my opinon is that your chances are not very good to get an alert in such case. SAP decided for which issue they issue an alert and for which not.
When you have an empty file in the file adapter, it seems that SAP thiks that this is not to critical and therefore they don't issue an alert.
The reason why you dont see it anywhere else is, that the adapter generates a message id only when there is something to make a message. Empty file means no message and you can not see it in the monitoring tools.
best regards,
Markus -
SQLException in the audit log for the Message Display Tool
Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
<DT_DatosDeControl>
<MIDDLEWARE_ID/>
<QUICK_ID/>
<INTERFACE_NAME/>
<MESSAGE_ID/>
<LOG_ID/>
<USER_ID/>
<SOURCE_SYSTEM/>
<TARGET_SYSTEM/>
</DT_DatosDeControl>
<DT_PagoDocVentaECC>
<VKORG>TVKO</VKORG>
<VKBUR>TVBUR</VKBUR>
<VKBUR1>TVBUR</VKBUR1>
<ROUTE>TVRO</ROUTE>
<ROUTE1>TVRO</ROUTE1>
<BLART>Q</BLART>
<BELNR>100</BELNR>
<WRBTR>200</WRBTR>
<LFART>100</LFART>
<VBELN>100</VBELN>
</DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong?
Maybe you are looking for
-
How do I install Photoshop Elements 6 on the Mac-mini?
How do I install Photoshop Elements 6 on the Mac-mini? I keep getting the following message: x Installation cannot continue until the following applications are closed: flash_server Please close the application(s) listed above and click "Try Again" t
-
Why won't the browser display this?
It compiles and I can run it from the command line. But when I try to run it from the browser it does nothing. If I remove the jdbc calls it displays "Antonio6" import java.sql.*; import oracle.html.*; public class table2 public static void main (Str
-
Hello. Yesterday we made the upgrade in our system to version 10.5.7. Onlyone 1 of our 6 computers had a problem importing quicktime to the shake. It's only with the shake, I tested in the final cut, in motion application and it's fine. Am I missing
-
Reverse engineer Toplink mapping to a ERM diagram
Hi, We have a Toplink mapping for our application, the problem is that in the database no foreign keys relationship are defined, thus the relations are only in our Toplink model and not in our database. Id like to create a ERM model with for instance
-
Using cFP-AI-110 to measure rpm:capacitance in the card?
I am attempting to measure the rpm of a number of different augers. The augers have a magnet on them that closes a magnetic switch when the magnet passes the switch. I have built a circuit with a very small amount of power traveling through a resisto