SOAP error in audit log of message monitor

Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhat

go to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps

Similar Messages

Error in audit log

Hi Experts,
A message has failed in adapter engine and the audit log shows some error in main,row 2,col 17.
My quesiton is,Is it in the soap header-> main or in Payload-> main document?
and how to find row 2.Is it 2nd line of the xml or something else?
Similarly, how to find the col(column)where the error present?
Please help me with the answer !!

Do one thing, its a work around.
downaload the payload XML file then open the XML payload file using XML -spy software and look for the row row 2,col 17.
In XML-SPy at the bottom right corner u can easily find out the row col details based on that u will check where is the problem.
chirag

Runtime error for Audit Log reports

Hi,
I have activated Reports feature at Site Collection level and then tried to run custom report for Dashboard library under Audit Log Reports but I got Run Time error. I tried on my local machine and on server.
Can any body let me know how to resolve this issue to get custom report?
Any help would be appreciated.
BELOW IS THE ERROR MESSAHE:
Server Error in '/' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed
by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
AEDLA.

The audit log reporting is kind of tricky to work with...until you know what you're doing.
Some things to check: Do you have the Reporting feature enabled? Do you have auditing enabled on sites in this site collection? Have any events been triggered that would have written to the audit logs? Did you specify an output library
for the report? Will the report have any data?
Also, look at the SharePoint logs in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\ and let us know any "Unexpected" errors.
Bob Guidinger
Please remember to click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Audit Log - Cancelled Messages

Hi all,
Can we see in AIF which user id has cancelled a particular message?
Thanks.
Kind Regards,
Brecht Bauwens

Hello Rafael,
We are on PI 7.0 Service Pack 15. We are also having the similar issue in our production system for the asynchronous messages delivered to the legacy database using JDBC Adapter. The status of the message in CC Monitoring is given as message successfully delivered, however the audit log is blank and has no information.
Could you please let me know, if the issue is resolved in your case by applying the above SAP Notes?
Thanks in advance!!
Thanks,
Manohar. Dubbaka

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

Adding entries in Audit Log Tab in Component Monitoring under Runtime Workb

Hello Experts,
I am trying to add my own audit log entries to the Audit Log Tab under Runtime Workbench -> Component Monitoring. I found this sap help link (http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/6fe540b1278631e10000000a1550b0/frameset.htm) I am not sure if i am going in the right direction or not. But, when I tried to use the code in my User Defined Function in Message Mapping it gives me java error on PublicAPIAccess.
Can anyone please let me know what am i doing wrong or if I am going in a totally wrong direction to achieve me goal.
I am using PI 7.1 without EP1 and my example uses File adapter.
Thanks!!

Hi,
if you are trying to add custom audit log for system monitoring in RWB in component monitoring, then i think it is not feasible........moreover for this thing, you can ask your basis guys to configure CCMS in your XI system to recieve alerts for your system.............
if you are trying to add custom audit log msgs for your msg processing, then you should develop a custom J2EE adapter module and add your audit log entries in the process method of your adapter module..............
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on May 6, 2009 7:12 AM

Audit Logs Empty in Communication Channel

Hi,
I am facing an issue in Channel Monitoring.I can see the messages are successful but nothing is displayed in Audit Logs.This is happening for both Receiver and Sender Channel.Earlier i could see the logs but it has started happening suddenly .
I am working on PI 7.1.Kindly provide help .

Hi Bhargav,
Check this note: 1436261
Reason and Prerequisites
Since PI 7.1, the audit log handling was changed, such that only audit logs which describe an error are persisted to the database. Audit Logs of type info are only kept in an in-memory cache per clusternode, and they get evicted according to a LRU strategy (details are explained in note 1314974).
There was an program error in the retrieval of audit logs from the memory caches of all cluster nodes, which led to the unavailability to monitoring of audit logs for messages which were processed on a different cluster node than the one on which the runtime workbench was executed.
Solution
To correct this problem, apply the patch matching your support package version as per the instructions in the NetWeaver Support Package Stack Guide.
PI 7.10
The archives and the Support Package Stack Guide can be found on the SAP Service Marketplace:
http://service.sap.com/netweaver --> SAP NetWeaver Process Integration 7.1 - Release-Specific Inf --> Support Package Stacks Information -->
7.1: SAP NetWeaver Process Integration 7.1
EhP1: SAP enhancement package 1 for SAP NetWeaver Process Integration 7.1
Please select the requested SP Stack.
Thanks,

Error reading job logs of Apps server from Central Instance

Dear Gurus,
We have newly installed system with one CI ( cluster environment) and 2 application Instances.
Systems are recently installed by other team. I am looking into support part after handover.
We have noticed below error while reading failed background job logs from our CI. If suppose any job is failing, we can read respective job log from that application instance but it throws error while reading job log from CI to either of application instance.
I checked /sapmnt/SID/global is shared among all 3 servers and i am successfully able to "Touch a" from applications instances.
Even though i have given "777" permissions to all folders like /sapmnt/SID , /sapmnt/SID/global , /sapmnt/SID/global/400JOB*
I am not able to read job log from CI , for same failed job I can read job log from respective application instance.
Error log :
Error reading job log JOBLGX00080700X39290
Message no. BT167
Diagnosis
The background processing system was unable to read the job log named in the message.
This message suggests that there is a problem with the TEMSE storage system of the SAP system. The TEMSE storage system is a repository for temporary objects, such as job logs and spool requests. Job logs are always stored in the TEMSE as operating system files.
This error occurs if the TEMSE system is not able to find or access the file that contains the text of the job log that you requested. Possible causes for the loss or unavailability of the job log include the following:
Someone deleted the required TEMSE file (from the operating system, not from within the SAP system).
A CRON (or equivalent scheduler) job has deleted the TEMSE file.
The file system in which the TEMSE stores its files is not mounted or is not accessible (NFS problem, disk failure, or similar problem).
The TEMSE reorganize or consistency check functions were used within the SAP system and deleted the job log.
SM21 logs :
Error 2 for write/read access to a file. File = /usr/sap/SID/SYS/global
BP_JOBLOG_SHOW: Failed to display jobs. Reason:
> Error reading job log JOBLGX00080700X39290
Strange this is I can check failed job log on one application instance frfom other application instance but not from CI.
Kindly throw some lights where to check.
Regards,

Hi Shravan,
I guess it is related to permission to /sapmnt/SID/global folder. Please ensure owner is sidadm:sapsys in all the systems viz CI, App servers etc.
Check the mounting options are correctly set with read/write mode.
Hope this helps.
Regards,
Deepak Kori

500 Internal Server Error - Channel Monitoring Audit Log

Hi Experts,
We are facing an error in the 'Audit Log' of the communication channel monitoring of a File Sender Adapter.
The channel uses a custom written Java Module which uses XSLT parser internally. The audit log displays the following error:
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: "The WebApplicationException log ID is [4698F300D2C40C2000000000000009AA]."
This error occurs both when the file is processed successfully or when in error. In case of a positive test case file, we can even see the message reaching Pipeline (SXMB_MONI). But only the audit log does not show the processed steps in the channel monitoring and displays the above error message.
We have even established that the cause of the error is Java Module (First, we executed by removing our custom Java Module from the module steps and the audit log showed the steps correctly. But by putting the module back in the channel, the error resumed).
Initially, the error was not coming and we were able to test this properly. But over the time the audit log error started. Now, we are not able to get rid of this even by restarting the channel or restarting the Java stack of the server.
To me, it seems like a memory issue in the Java Stack.
Any thoughts?
Can we find out where to find the details of the WebApplicationException log ID displayed above?
Thanks,
Sudheer

Hello,
This could be generic but may helo you:
500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Regards,
Caio Cagnani

Audit log missing in message in Message Monitor

Hi,
I am facing a weird problem.
I found this in one of my scenario where we are using AS2 adapter and its an IDoc to file scenario.
When I go to details of messages in message monitor in RWB,sometimes the Audit log is empty.
It is happening randomly and not specific to any scenario as later on I found the same problem in some messages from other scenarios too.
I have never faced this problem till now and it was working fine before.
Can anyone please let me know what could be the reason for this as this is difficult for me in case I need to analyse a message and there is no audit log.
Thanks in advance.
Regards,
Shweta

Hi Rajesh,
Doesnt work for me :(((
404 Not Found
The requested resource /messagingsystem/monitor/monitor.jsp is not available
Details: File [messagingsystem/monitor/monitor.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Thanks.
Regards,
Shweta

Missing Audit Log of Adapter Engine in Message Monitoring

Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
Daniel

Hi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel

Audit Log Report generating an "Out of Memory" error message.

Greetings. We are a new IDM customer. We are running IDM 6.0 with an Oracle database. We are now getting the following error message when we run the IDM Audit Log Report for Today's Activities:
"java.lang.OutOfMemoryError".
How do we increase the memory setting for reporting? Thanks.

Hi,
I am also getting the same error. I have netbeans with tomcat andi modified the setting the netbeans.conf to
netbeans_default_options="-J-Xms32m -J-Xmx750m -J-XX:PermSize=32m -J-XX:MaxPermSize=750m -J-Xverify:none -J-Dapple.laf.useScreenMenuBar=true"
i have 896MB of RAM. However, the error is still showing up? Any ideas on how to resolve this?
Thanks,

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

SOAP error in audit log of message monitor

Similar Messages

Maybe you are looking for