Billing block for customer for sales document type OR

Hi
I want to block a customer for a particular sales document type OR
How to do it?
Regards

Hi Nikhil
There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
SAP Documentation:
Check partner authorizations
This check determines whether a partner is authorized to release against a contract.
Procedure
Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
Partners in the contract
If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
Partners in the hierarchy
If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
Note
If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
Regards.
Mikel

Similar Messages

Billing block "Calculation missing" in sales order

When I save sales order today, i find that billing block - 01 Calculation missing is trigger. I have not found this block before. What is the root cause of this?

Hi,
Someone has change the configuration to have the billing block automatically in your sales document type. You can check it in the transaction VOV8.
Go in to your sales document type and see the field "Billing Block" under section "Billing". The value should be now "01". That's the reason why you get this billing block automatically in the sales order. If you don't want it to appear, please remove this entry to Blank and then try with a new sales order.
Best regards,
Anupa

Immediate Transfer Order Creation not occuring for Sales Document Type

Hello gurus,
I have a situation where a transfer order is not being created immediately for a specific sales document type.
Here is an example document flow of a desired scenario where the system is working:
Sales document type: ZOR
> Delivery type: LF
> WMS transfer order
The Item Category in this scenario is TAN.
Here is an example of the document flow in the current scenario where the system is not working:
Sales document type: ZPRD
> Delivery type: LF
The Item Category is also TAN in this scenario. The only identifiable difference in these scenarios is the sales document type. For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created. For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
Is there a configuration setting that is controlling this? Any help would be greatly appreciated.

Thank you very much for the link. When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
The problem I'm running into now is the configuration setting that controls this. I thought I figured it out when going to this IMG path:
SAP Customizing Implementation Guide --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Output Control --> Define Print Parameters Shipping
When selecting the Delivery Note, the shipping point I was using was not configured in this location. I added the shipping point into this transaction, saved, and created a new order & delivery. However, the WMTA output type still was not automatically inserted into the delivery when saving. Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery?

Authority-Check for Sales Document Type

Hi All...
I would like to incorporate Authority-Chack for the field Sales Document Type "TVAK-AURT"...
Can any one give me the sample code or exact code..?
I have written Authority-check for Sales Organization as follows...
authority-check object 'V_VBAK_VKO'
                 id 'VKORG' field i_sales-vkorg
                 id 'VTWEG' field '00'
                 id 'SPART' field '00'
                 id 'ACTVT' field '03'.
        if sy-subrc ne 0.
        delete i_sales.
BUT HOW TO WRITE FOR V_VBAK_AAT..??

Please check object: <b>V_VBAK_AAT</b> for the same.
EG:
authority-check object 'V_VBAK_AAT'
id 'AUART' field L_AUART
id 'ACTVT' field '03'.
Kind Regards
Eswar
Message was edited by: Eswar Rao Boddeti

Delivery block in Sales document type

Hi All,
Can you please explain the usage of the delivery block field available in Sales document type customization under the Scheduling Agreement Tab with an example.
Please let me know on where the "tolerance" described in the F1 help is defined or controlled?
Thanks & Regards
ilango

Hi Ilango,
I could not find the "tolerance" described by you. Please read:
Delivery block (document header)
Indicates if an entire sales document (a sales order, for example) is blocked for delivery.
Procedure
The system can propose the delivery block indicator according to sales document type. You can also enter a block manually in the header. A block in the header applies to the entire document. If you want to block one or more specific items, you can enter the block at item level.
The delivery block at header level is only effective if this block is assigned to the corresponding delivery type in the Customzing table (TVLSP). Regardless of the settings in Customizing, the delivery block is always effective at schedule line level.
Example
You can block delivery automatically for certain sales document types (for example, free of charge deliveries) where it is important that someone checks the details before shipping takes place.
Dependencies
If you use a credit limit check, the system can automatically block delivery. You can change this block. However, as soon as you change any of the values in the sales document, the system automatically reapplies the delivery block.
So, in abstract, the whole document will be blocked, depending of this customization.
Regards
Ruy Castro

Why should we create a new sales document type

I want to know the actual reason behind creating new sales document type when the standard document is available

General procedure when setting up sales document types
You have three options for configuring new sales document types:
1. Change an existing sales document type.
2. Copy an existing sales document type and change it according to your requirements.
3. Create a new sales document type.
Recommendation
For small changes, SAP recommends that you copy similar existing sales document types in the standard SAP R/3 System and make the appropriate changes. Small changes might, for example, be, a changed description, a different number range or a different increment for the numbering of items. The name is to start with the letter Z as SAP keeps this range free in the standard system.
This procedure has the following advantages:
All the specifications of the existing sales document type are copied. In particular, the data concerning, for example, partner determination, pricing or document flow which you would otherwise have to edit manually is copied.
You can test your new sales document types in respect to the settings made without having to edit the other settings.
When copying sales document types, item categories and schedule line categories, the SAP R/3 System automatically creates a log with the copied data. Using the log, you can check whether all of the copied data applies to your sales document type or whether you need to make changes.
Actions
1. If you need to make further changes, you should define new sales document types. To do this, you enter an alphanumeric key with a maximum of four characters for a sales document type and a textual description for the key.
2. Maintain the specifications on the detail screen according to your requirements.

Block Sales Document type for a set of customers

Hi,
I have to block the processing of particular sales document type, say XX or a scheduling agreement for a specific set of customers. Can anyone suggest me some inputs on this.
Thanks in advance
Suresh

Thanks all for quick response.
1. By blocking the sales document type by setting the block in VOV8 will not allow u to process that particular sales document type at all.. ie for all customers..But my problem is to block, say ZCAL for particular set of customers only..say customer 1234 of sales org 0001, customer 2132 of sales org 0001, customer 1315 of sales org 0002 etc..Apart from these setof customers, it should be able to process the document type for other customers.
2. By blocking the customer in VD05, it will block the customer for all sales operations. But i dont want to block the same customer for other sales document types.. Say, it should be blocked for ZCAL but not for all document types.
My requirement:
When we create an scheduling agreement, we give the sales area in the initial screen and enter. Then we give the Sold to party.Here it should check whether the customer entered is in the list of customers blocked for scheduling agreement. If so, it should pop up an error message stating" you cannot process scheduling agreement for customer X" If not, it should allow further processing.
I will try with the suggested User exit.
Please suggest if u have got any more ideas.
Thanks
Suresh

Two different billing document types for 1 sales document type.

Hi Gurus,
I have a requirement , wherein our client is having counter sale.
He is using one sales doc type , and while creating a order , he is manually adding payment terms.
Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
As per my understanding this is not possible.
Want to know if anyone has some different thought on this.
Thanks in advance
Nilesh.

Dear Nilesh,
There two options you can look in to
One option is
1.You can define different sales document types for cash and credit.
2. You can define two different billing documents.
3.Do the copy control settings for each combination
Cash sales order >Delivery>Cash invoice
Credit sales order >Delivery>Credit invoice
Second option is
1. You can maintain single sales document for both the processes.
2.Define two different billing types then do the copy control settings for both billing types.
But in this option user need to select the billing type manually based on the process while creating billing document.
I hope this will help you,
Regards,
Murali.

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Number range for sales document type

Hi,
I am having 1 client under that 5 company codes, ade according to that 5 plants & 5 sales organization.
so for one comapany code including all there are 15 sales document types same for other also
my question is
How can I assign number range for all that?
If i am going to maintain seperate document type it goes to 75
which userexit will help me out for this?
without userexit what is the otherway?
regards,
Rahul

Not only at order level, you will have to use exits at delivery and billing document level also.
For sales documents:
Exit USEREXIT_NUMBER_RANGE in MV45AFZZ
For delivery documents:
Exit USEREXIT_NUMBER_RANGE in MV50AFZ1
For billing documents:
Exit USEREXIT_NUMBER_RANGE in RV60AFZZ
You need to give tables for maintaining numbers for sales, delivery and billing documents. In the exit a select query can be written to fetch the data based on the parameters like sale orgainzation, company code etc.
Regards,
GSL.

Field Exit for Sales Document Type in VA01

hi
i want to do field exit for Sales Document Type in VA01.
but i dont know to find the correct exit.
pls tell the exit name and the steps to find it.
thank u

Hi,
Goto this link u will get the information u required....
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
Check the numerous threads that already exist in SDN :
CMOD and SMOD
http://www.sap-img.com/abap/what-is-user-exits.htm
Regards,
Manish

Link for sales document type and PO/delivery number

Hi guys,
I have a PO number(EKPO-EBELN) and the delivery number for STO(LIKP-VBELN), how am i going to link this 2 to get the SALES document type(AUART)?
thanks a lot!

mark,
So this is really not possible to get the pricing condition using the BAPI_SALESORDER_SIMULATE since this bapi requires the sales document type?
it depends if your delivery wrt to Sales document which is VBAK-VBELN than you can use above FM.here your deliver is created from STO so now you have to use select quesy as i already suggested as vijay also.
you may want to do same.
Amit.

Two different Incompletion log in item level for one sales document type

Hi All,
we are using one sales document type for 5 different sales org, now we are implemented new sales org.
pervious all 5 sales org we have setup incompletion log at item level 5 fileds.now for new sales org we need to setup out 5 fields we need to setup 3 field.
how to maintain same sales document type 2 different incompletion log.
i have checked in forum i found out below link.but is not matching for my requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=1433420
Thanks,
Kumar

Hi ,
Thanks for your responds.
i will check with my ABAP person if any thing is required i will come back to you.
Thanks,
kumar

Checking rule for sales document types

Hi,
Can I change the cheking rule for a sales document type? Where could I change it? or should I build Z table?
Thanks!

7,
Checking rule is hard-coded into standard SAP sales doc maintenance programs. For SOs, it is A or A* (depending on the stock type). For Deliveries, it is B or B*. There is no way to use standard configuration to alter the rule within SD.
Best Regards,
DB49

Sales document type is not defined for(sales org/division/distribution chan

Hi Friends,
I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
Any pointers will be rewarded.
Regards

Hi there,
When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
Only then you will be log a sales order for a sales area.
Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
Regards,
Sivanand

Billing block for customer for sales document type OR

Similar Messages

Maybe you are looking for