Como desabilitar ativação do "first run" e pedido de navegador padrão? Já tentei pelas opções sem sucesso.
Sempre que inicio o Firefox abre a página de First Run junto com a página inicial, e também abre a janela de ativação de navegador padrão.
Quanto à pergunta de navegador padrão, já tentei tanto respondendo na janela, como dentro de opções sem sucesso. Toda vez pergunta.
Já para o First run, não encontrei como desabilitar. A única tentativa foi de deixar em branco a opção de página inicial, mas sem resultado.
Olá,
Geralmente este erro ocorre quando você tem duas instâncias do Firefox ou dois perfis.
Tente entrar no gerenciador de perfis e verifique se existe mais de um perfil, caso haja delete um deles.
*[https://support.mozilla.org/pt-BR/kb/Gerenciando+perfis Gerenciando perfis]
Caso isso não resolva verifique se há duas versões do Mozilla instalado em sua maquina.
Procure por um ou nos dois seguintes diretórios:
*C:\Arquivos de Programas\Mozilla Firefox
*C:\Arquivos de Programas (x86)\Mozilla Firefox
Verifique quantas instalações existem caso tenha mais de uma desinstale as duas e reinstale o Firefox.
*[https://support.mozilla.org/pt-BR/kb/Desinstalando%20o%20Firefox Desinstalando o Firefox]
*[https://support.mozilla.org/pt-BR/kb/Instalando%20o%20Firefox%20no%20Windows Instalando o Firefox no Windows]
Similar Messages
-
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Office 2013 Home and Business OEM First Run screen
Hi There
We are starting to roll out office 2013 oem Home and Business our users are reporting that the first run screen get coming up every time there open an office application.
In Group Policy I've disable the First Run Movie and Office First run on application boot however the users are still getting to first run screen this is every annoying.
Any help with would be great?
Cheers,
BrettThe policy setting should work: it correctly adds bootedrtm=1 value to HKCU\Software\Policies\Microsoft\office\15.0\firstrun. But for some reason Office apps ignore it. I tried disabling the entire policy, then go through the welcome screen. After finishing
with it, office created the same value, but in another place (HKCU\Software\Microsoft\Office\15.0\FirstRun), and the screen never appeared anymore.
So to make the setting work, you have to manually create registry setting (via GPO preference) with the following data:.
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\FirstRun]
"BootedRTM"=dword:00000001
P.S. this was pretty easy, but did anyone look at disabling the EULA prompt? The acceptance is marked by creating a registry key for each user, but the path contains computer name :)) Therefore if all users of the PC have accepted the agreement, and you
renamed the computer, the popup comes back again. And of course group policy is impossible with such path. -
Office 2013 H&B Click to Run - First Run Wizard Keeps Popping up
I repeatedly get this popup happening. I run though all the steps in the wizard and close program. Next time I open it the wizard pops up again. I have tried uninstalling and reinstalling twice.
I tried to run the command: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
This was mentioned in another article and nothing seems to have helped.
The computer with this issue is running Windows 7 - 64 bit with all current updates installed.
My version of office is 15.0.4535.1511
Does anyone have any other ideas?Hi,
It would be great if you can provide the screenshot here, so that we can understand you clearly.
If you mean the First Run movie that appears when Microsoft Office 2013 applications are first launched, please take a look at this blog:
http://blogs.technet.com/b/odsupport/archive/2012/11/14/how-to-manage-the-first-run-screens-that-appear-when-microsoft-office-2013-applications-are-first-launched.aspx
Download and install the Office 2013 Administrative Template files, then enable the option of Disable First Run Movie in Local Group Policy Editor.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.
Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone -
Slow reports giving "An error has occurred: Request timed out" on first run
I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed.
Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re-run them then they come up almost straight away.
This tells me that the report runs and it gets stored in the cache server, which is fine, but I want to be able to eliminate the timeout for the users.
I found a solution if .Net 2.0 is installed (HOW TO: Resolve 'An error has occurred: Request timed out' issue) but my server only has .Net 1.1.
Is there a change to a timeout I can made to the server as it is, or should I install .Net 2.0 and change IIS to use that version of .Net then make the solution change already suggested?
TIA
I should add that the timeout is after around 5 minutes, so the normal changes recommended at note 1198539 doesn't seem to apply, as the timeout happens after the normal 90 seconds expires for some time.
Edited by: Geoff Croxson on Sep 3, 2009 2:02 PMWill something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please -
ORA-3113 while running export (first run ok, second run fails)
Hi,
I'm running 10g (10.1.0.2.0) on gentoo Linux.
After a restart of the database I can do an EXP for any user without errors. But when I repeat the same command after the export I get the following error:
. . exporting table WEB_SESSION_DATA 0 rows exported
. exporting synonyms
EXP-00008: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
EXP-00000: Export terminated unsuccessfully
It's always the same error on the same task (exporting synonyms) but always just for the second and any later export, while the first one is ok.
I read through some forums and found, that ORA-3113 is a standard error which just hides the real error. So I look into the trace files and found:
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [jox_lookup_known_object()+413] [SIGSEGV] [Address not mapped to object] [0x1AD14034] [] []
Current SQL statement for this session:
SELECT SYNNAM, DBMS_JAVA.LONGNAME(SYNNAM), DBMS_JAVA.LONGNAME(SYNTAB), TABOWN, TABNODE, PUBLIC$, SYNOWN, SYNOWNID, TABOWNID, SYNOBJNO FROM SYS.EXU9SYN WHERE SYNOWNID = :1 ORDER BY SYNTIME
If I call this SQL from sqlplus I get the same ORA-3113, so this seems to be the cause for the export failure.
When I remove the DBMS_JAVA.LONGNAME calls from the statement, it runs fine. It also runs fine, when I add a "and 1=0" to the EXU9SYN view. But this will not really solve the problem, because then all synonyms don't get exported.
I also checked all the synonyms and they are valid, the referenced tables exist and can be queried.
Because we use JavaStoredProcedures I cannot remove the Java Features in Oracle. But I reinstalled it (rmjvm.sql and initjvm.sql) but this did not help.
Does anyone have an idea what's happening here?
Especially the "first run ok, second run fails" seems to be very strange, because DB objects including DBMS_JAVA should be ok, if the first export can be done. So what changes in the database during or after the first run?Maybe description for bug 3953108 (ORA-7445 AND ORA-3113 DURING DIRECT FULL DATABASE EXPORT OF PUBLIC SYNONYMS) is helpful.
Werner -
Video not working on the first run of Android app
I couldn't find any results regarding this problem. Maybe I'm just using wrong keywords as it is difficult to explain.
Has anyone else encountered that video is not working on the first run of Android app? By first run I mean directly after installing. I'm using NetConnection, NetStream, Video objects and GPU renderMode. By working I mean it's not showing and can't hear the audio. I haven't yet debugged deeper so I don't know if the problem is actually related to the code loading the video.
I've encountered the following issues, which may or may not be related, regarding the the first run and Video object:
- The first run takes about 20 seconds to start. After that, the start is pretty much instant. If you clear app's cache, it again takes the 20 seconds to launch. The video works after clearing app's cache.
- When creating the first Video object, the app flashes screen to black for a few frames. This is why I create a dummy Video object in the beginning.
I use AIR 13, going to upgrade to 14, but I'm quite sure this problem and the issues have been for a while.I should add that we're using flv, not mp4. And they're progressively downloaded, not local.
-
Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English
Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]] -
The first run page keeps opening every time I open my home page, how do I turn it off?
When I first downloaded FF 4 on my netbook I got the first run, welcome to FF 4 screen. As usual. But it keeps coming back. Every time I open FF it opens the welcome screen in the first tab and in the second tab is my home screen.
If FF is already open and I want to open my home screen in another tab, it simultaneously the welcome screen in one tab and my home screen in another.
I will not upgrade the rest of my machines to either FF4 or 5 until this is fixed.A couple of possible causes, you have multiple home pages set, or the preferences file can not be updated. For details on both of those, see [[Firefox has just updated tab shows each time you start Firefox]].
-
How do I remove "first run" window after having opened and used FF many times?
When I open FF, 2 tabs are presented, the first is the "first run" window the other is my homepage. I would like to delete or remove the first run page
See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved -
Distinguishing First Run and Rerun for DVR Recording
If you want to record a series, not just a single show, the only choice you have is to record BOTH First-Run episodes AND Reruns. I note that Direct TV users and TiVo users have a choice when recording a series by selecting First Run Only or First Run and Repeats. Without this discriminate, shows that repeat habitually throughout the day and week are recorded. This is a major inconvenience if your recording are almost exclusively series TV shows. It becomes very inconvenient for series broadcast on HBO, where throught the week multiple series and reruns--for example Boardwalk Empire--are all playing in a single week. The lack of this feature--that other services already have--is a major shortcoming.
Something odd there. Which DVR model?
Should be press DVR button scrool to manage series recordings, press right, scroll to show, press ok, (options including change priority, modify series and cancel series. Modify Series. press ok. Options on that include episodes (first run only/first run and repeats). Scroll to episodes, press enter, change as desired, press ok, push right to save, press ok. close menus, may have to do repeated exits.
You may also want to find the dvr settings to set your default options for creating series recordings. menu/settings/system/dvr/default series options -
SYS_CONTEXT usage taking time for first run
Hi all,
we have a screen(search) with conditions like make, manufacturing date, region, etc upto 20 conditions. User can restrict the result he wants based on the filters specified. As there are more parameters, a static query was takign a lot of time to return the result.
We went with dynamic query(only adding the conditions that user has specified in the screen dynamically) and to avoid hard parsing we introduced sys_context.
we found the result amazing with the subsequent run taking very less time(3-10 secs max) to fetch the results. But the first run (which goes for hard parsing done) is taking a quite a lot of time (close to 10mins).
we are using Oracle 11g.
thought this query is used on a regular basis, sometimes the sqlID gets cleared off from the cache due to LRU algorithm. Also sometimes, I see there are more than one SQL ID getting generated for the same set of parameter.
we cannot use the sql pin option as we would need to pin the sql for every combination of parameter(around 30).
Could anyone suggest a way of reducing the first run time?
Thanks in advance..
Regards,
Ela>
we cannot use the sql pin option as we would need to pin the sql for every combination of parameter(around 30).
>
Then try specifying 'something' for every condition and using '%' for the context values that you don't care about.
If you don't care about 'empno' use '%' for the context value.
select * from emp where empno like '%'If you do care use an actual value
select * from emp where empno like '7369'The 'like' will be treated as '=' for the second case and in the first case it should be optimized out in the actual query.
That way every query has the same 30 placeholders but the '%' will optimize out the ones you don't want to use. -
SSRS 2012 Reports freeze after first run in IE 11
Hello,
We have just recently upgraded/migrated from SSRS 2008R2 to SSRS 2012 sp2 (Windows 2012 R1).
We have found one report so far when using IE 11 that after the first run from the client side Internet Explorer freezes. The report normally takes 4-5 seconds to run. I have waited an hour and the report has not resolved.
The same report runs fine in Firefox or Chrome, even after multiple runs. It also continues to run fine from our SSRS 2008R2 server from IE 11.
I have tried private browsing and it still only runs once and will not run again. I have tried compatability mode and it will not run either. I have also noted that it will crash our ERP system (java based) when it is running at the same time
in IE as when I run this report. Other reports seem to work fine.
The report is simple, it is just a report of subscriptions from ReportServer. There is some XML parsing in there though. It is the only difference that I can see in all the other reports on the system. Oh, the report runs fine from
Visual Studio 2012. I have redeployed, and no luck yet.
Here is my query
WITH [EMAIL]([SubscriptionID], [EmailLine]) AS
SELECT I.[SubscriptionID],
I1.rows.value('Value [1]', 'VARCHAR(MAX)') AS [EmailLine]
FROM (
--if the Subscription is an e-mail, get the XML fragment which contains the Email line
SELECT S.[SubscriptionID],
--add a "root" element to create well-formed XML to the "ExtensionSettings"
--(in case it's NULL)
CONVERT(XML, N'<Root>' + CONVERT(NVARCHAR(MAX), S.[ExtensionSettings]) + N'</Root>') AS [ExtensionSettings]
FROM ReportServer.dbo.[Subscriptions] S WITH (NOLOCK)
WHERE --only get e-mail subscriptions
S.[DeliveryExtension] = 'Report Server Email'
) I CROSS APPLY
--pull out elements in the "ParameterValues/ParameterValue" hierarchy
I.ExtensionSettings.nodes('/Root/ParameterValues/ParameterValue') AS I1(rows)
WHERE --only get the Subject field
--I1.rows.value('Name [1]', 'VARCHAR(100)') = 'Subject'
I1.rows.value('Name [1]', 'VARCHAR(100)') IN ('TO', 'BCC','CC')
--get subscription data for all users
SELECT replace([EMAIL].[EmailLine], '@plu.edu','') email_line,
--internally put-together description of subscription
-- S.[Description],
--user-friendly message for what happened the last time the subscription ran
--which may be "New Subscription"
--report path and name
C.[Path], C.[Name],
--start date and end date for schedule
SC.[StartDate], SC.[EndDate],
--when the subscription was modified
S.[ModifiedDate]
FROM --actual subscriptions
ReportServer.dbo.[Subscriptions] S WITH (NOLOCK) LEFT OUTER JOIN
--report details from Catalog
ReportServer.dbo.[Catalog] C WITH (NOLOCK) ON
S.[Report_OID] = C.[ItemID] LEFT OUTER JOIN
--Users (owner)
ReportServer.dbo.[Users] [U1] WITH (NOLOCK) ON
S.[OwnerID] = [U1].[UserID] LEFT OUTER JOIN
--Users (modified by)
ReportServer.dbo.[Users] [U2] WITH (NOLOCK) ON
S.[ModifiedByID] = [U2].[UserID] LEFT OUTER JOIN
--Subscription Schedules
ReportServer.dbo.[ReportSchedule] RS WITH (NOLOCK) ON
S.[SubscriptionID] = RS.[SubscriptionID] LEFT OUTER JOIN
--Schedules
ReportServer.dbo.[Schedule] SC WITH (NOLOCK) ON
RS.[ScheduleID] = SC.[ScheduleID] LEFT OUTER JOIN
--Subjects CTE from e-mail subscriptions
[EMAIL] ON
S.[SubscriptionID] = [EMAIL].[SubscriptionID]
WHERE EmailLine is not null
and EmailLine like '%' + @Email + '%'
and C.[Path] like '%' + @Path + '%'
order by C.[Path]
The other observation that I have is that my CPU utilization goes up from 25% to over 50% when I kick this off. So, it is definitely getting confused about something...
Thank you for your feedback,
ChrisBrad,
I am not sure how to attach the rdl, so here it is inline.
The one thing that is strange is that my test SSRS 2012 SP2 server (Windows 2008R2) the report works. However, their is a difference in the OS. The production server is Windows 2012
The report works in Visual Studio, it works in Firefox, it works in Chrome. Just not in SSRS 2012 SP2 on Windows 2012.
Thanks
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="table1">
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>4.125in</Width>
</TablixColumn>
<TablixColumn>
<Width>2.75in</Width>
</TablixColumn>
<TablixColumn>
<Width>2.625in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.18in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Email Addresses</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<ZIndex>11</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Path</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>10</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Name</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<ZIndex>9</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox4">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Start Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox4</rd:DefaultName>
<ZIndex>8</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox10">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>End Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox10</rd:DefaultName>
<ZIndex>7</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox13">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Modified Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox13</rd:DefaultName>
<ZIndex>6</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
<TablixRow>
<Height>0.18in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="email_line">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!email_line.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>email_line</rd:DefaultName>
<ZIndex>5</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Path">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Path.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Path</rd:DefaultName>
<ZIndex>4</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Name">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Name.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Name</rd:DefaultName>
<ZIndex>3</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="StartDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!StartDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>StartDate</rd:DefaultName>
<ZIndex>2</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="EndDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!EndDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>EndDate</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="ModifiedDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!ModifiedDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>ModifiedDate</rd:DefaultName>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<FixedData>true</FixedData>
<KeepWithGroup>After</KeepWithGroup>
<RepeatOnNewPage>true</RepeatOnNewPage>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Group Name="table1_Details_Group">
<DataElementName>Detail</DataElementName>
</Group>
<TablixMembers>
<TablixMember />
</TablixMembers>
<DataElementName>Detail_Collection</DataElementName>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>email</DataSetName>
<Height>0.36in</Height>
<Width>11.99999in</Width>
<Style />
</Tablix>
</ReportItems>
<Height>0.36in</Height>
<Style />
</Body>
<Width>12in</Width>
<Page>
<PageFooter>
<Height>0.25in</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<ReportItems>
<Textbox Name="textbox8">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Globals!ReportFolder & "/" & Globals!ReportName & "/" & User!UserID</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<Left>8in</Left>
<Height>0.25in</Height>
<Width>4in</Width>
<Style>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Style />
</PageFooter>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="SQL_ReportServer">
<DataSourceReference>SQL_ReportServer</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>77e94914-07c8-421a-b785-a126cad0d6ac</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="email">
<Query>
<DataSourceName>SQL_ReportServer</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Email">
<Value>=Parameters!Email.Value</Value>
</QueryParameter>
<QueryParameter Name="@Path">
<Value>=Parameters!Path.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>WITH [EMAIL]([SubscriptionID], [EmailLine]) AS
SELECT I.[SubscriptionID],
I1.rows.value('Value [1]', 'VARCHAR(MAX)') AS [EmailLine]
FROM (
--if the Subscription is an e-mail, get the XML fragment which contains the Email line
SELECT S.[SubscriptionID],
--add a "root" element to create well-formed XML to the "ExtensionSettings"
--(in case it's NULL)
CONVERT(XML, N'<Root>' + CONVERT(NVARCHAR(MAX), S.[ExtensionSettings]) + N'</Root>') AS [ExtensionSettings]
FROM ReportServer.dbo.[Subscriptions] S WITH (NOLOCK)
WHERE --only get e-mail subscriptions
S.[DeliveryExtension] = 'Report Server Email'
) I CROSS APPLY
--pull out elements in the "ParameterValues/ParameterValue" hierarchy
I.ExtensionSettings.nodes('/Root/ParameterValues/ParameterValue') AS I1(rows)
WHERE --only get the Subject field
--I1.rows.value('Name [1]', 'VARCHAR(100)') = 'Subject'
I1.rows.value('Name [1]', 'VARCHAR(100)') IN ('TO', 'BCC','CC')
--get subscription data for all users
SELECT replace([EMAIL].[EmailLine], '@plu.edu','') email_line,
--internally put-together description of subscription
-- S.[Description],
--user-friendly message for what happened the last time the subscription ran
--which may be "New Subscription"
--report path and name
C.[Path], C.[Name],
--start date and end date for schedule
SC.[StartDate], SC.[EndDate],
--when the subscription was modified
S.[ModifiedDate]
FROM --actual subscriptions
ReportServer.dbo.[Subscriptions] S WITH (NOLOCK) LEFT OUTER JOIN
--report details from Catalog
ReportServer.dbo.[Catalog] C WITH (NOLOCK) ON
S.[Report_OID] = C.[ItemID] LEFT OUTER JOIN
--Users (owner)
ReportServer.dbo.[Users] [U1] WITH (NOLOCK) ON
S.[OwnerID] = [U1].[UserID] LEFT OUTER JOIN
--Users (modified by)
ReportServer.dbo.[Users] [U2] WITH (NOLOCK) ON
S.[ModifiedByID] = [U2].[UserID] LEFT OUTER JOIN
--Subscription Schedules
ReportServer.dbo.[ReportSchedule] RS WITH (NOLOCK) ON
S.[SubscriptionID] = RS.[SubscriptionID] LEFT OUTER JOIN
--Schedules
ReportServer.dbo.[Schedule] SC WITH (NOLOCK) ON
RS.[ScheduleID] = SC.[ScheduleID] LEFT OUTER JOIN
--Subjects CTE from e-mail subscriptions
[EMAIL] ON
S.[SubscriptionID] = [EMAIL].[SubscriptionID]
WHERE EmailLine is not null
and EmailLine like '%' + @Email + '%'
and C.[Path] like '%' + @Path + '%'
order by C.[Path]</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="email_line">
<DataField>email_line</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Path">
<DataField>Path</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Name">
<DataField>Name</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="StartDate">
<DataField>StartDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
<Field Name="EndDate">
<DataField>EndDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
<Field Name="ModifiedDate">
<DataField>ModifiedDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="Email">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Email Like (e.g allen):</Prompt>
</ReportParameter>
<ReportParameter Name="Path">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>%</Value>
</Values>
</DefaultValue>
<Prompt>Path like (e.g Advancement):</Prompt>
</ReportParameter>
<ReportParameter Name="Report_Parameter_2">
<DataType>Boolean</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Parameter OK?</Prompt>
</ReportParameter>
</ReportParameters>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>811078db-33dd-4670-9df4-be748e9ec2ef</rd:ReportID>
</Report> -
Install went smooth, "first run" applet didn't seem to run
I upgraded to SL and my mac seems very happy. However I have a concern... After the install, the system rebooted, and the welcome screen came up, all the welcomes, and hellos in the different languages, and then a configuration utility came up. I remember seeing icons for configuring iMail, network, etc. however that app quit, and I can't seem to find it to run again. Is there a way to launch this 'first run startup configuration thingie'?
It's an upgrade/update that used your previous information, so no need for the setup assistant. Just a simpler way to install stuff by Apple. If you really want to run the setup assistant, launch the Terminal.app, type in this command, hit the return key, enter your password, hit the return key, quit Terminal, and restart:
*sudo rm /private/var/db/.AppleSetupDone*
Use at your own risk.
Maybe you are looking for
-
I am a macbook user latest update & cannot get beyond the password - have used Adobe password & administrator password but the "ok" keeps jumping - hint: says "black & white" Very frustrating.
-
Error while configuring weblogic workshop application to cruise control.
Hi, I have a web application which is created through weblogic workshop 9.2 and want to configure it to cruise control. In that process, i had to change the web app to ear application and created build.xml for configuring it to cruise control but I'm
-
Using CISCO CHS 355HDC and wish to use IR extender through cabinetry. The 3 ft cable from Verizon is not long enough to make it to box. Have tried to extend the length with an extender cable - "8 ft headphone/computer speaker extension, 3.5 mm, ster
-
Oooops my neighbours can access my Infinity
Hi, To test my new Inifinity's speed on a better PC I borrowed my friendly neighbours laptop and entered my wireless/password key into their laptop so I could log into my network. However their laptop has now "remembered" my password and they can now
-
Can some one help me to migrate following code form sybase IQ to Oracle10.2 call xp_cmdshell('echo "some thing" > ./temp_file');