Distinguishing First Run and Rerun for DVR Recording

If you want to record a series, not just a single show, the only choice you have is to record BOTH First-Run episodes AND Reruns. I note that Direct TV users and TiVo users have a choice when recording a series by selecting First Run Only or First Run and Repeats. Without this discriminate, shows that repeat habitually throughout the day and week are recorded. This is a major inconvenience if your recording are almost exclusively series TV shows. It becomes very inconvenient for series broadcast on HBO, where throught the week multiple series and reruns--for example Boardwalk Empire--are all playing in a single week. The lack of this feature--that other services already have--is a major shortcoming.

Something odd there. Which DVR model?
Should be press DVR button scrool to manage series recordings, press right, scroll to show, press ok, (options including change priority, modify series and cancel series. Modify Series. press ok. Options on that include episodes (first run only/first run and repeats). Scroll to episodes, press enter, change as desired, press ok, push right to save, press ok. close menus, may have to do repeated exits.
You may also want to find the dvr settings to set your default options for creating series recordings. menu/settings/system/dvr/default series options

Similar Messages

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]

Show not flagged as "first run" in listings, causing dvr headaches

As of 21 April 2014, "The Boondocks" episode that airs on Cartoon HD at 10:30pm EDT each Monday is a first run. However, the listings on my FiOS guide don't show it as such, so if I have my dvr set to record first run only, it doesn't record ANYTHING. If I eliminate the first run requirement, it schedules EVERY airing of the show to record. Please fix this. Thank you.

One area I saw a major improvement (about 2.5x faster) was in the processing of Magic Bullet effects, specifically Colorista and Looks.
If you use those effects at all (or any others that may be processed on the GPU), the extra CUDA cores really do make a significant difference.

How can I disable the 'First Run' and 'Whats New' pages from showing after updating Firefox for all users that log onto a system.

I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone

Programmatically distinguish between running and reserved vi's

I want to programatically check whether a VI is running. I tried to use the "ExecutionState" property, but this did not work for me. My problem is that my definition of running does not match the execution state property’s definition of running:
My Definitions
·         Running = Some element of this VI is currently executing (run arrow looks like this: )
·         Reserved = This VI is a sub VI of a running VI, but this VI is not actually running (run arrow looks like this: )
·         Idle = This VI is in memory but is not running or reserved (run arrow looks like this: )
Execution State property definitions
·         Running = Some element of this VI is currently executing OR   this VI is a sub VI of a running VI (run arrow looks like this  or like this )
·         Idle = This VI is in memory but is not running (run arrow looks like this: )
Since each VI's front panel displays a running arrow when that VI is running and a reserved arrow when that VI is reserved, there must be some way to programatically distinguish between these two states. I hope that this distinction is exposed to programmers.

You should also go vote for this idea - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Need-a-way-to-visualize-VI-call-chain-hierarchy/idi-p/...
Just to expand on P@Anand's suggestion, because it is a good one - you can obtain references to all the VIs and check their state, and then open the BDs of those which are Run Top Level and manuallly inspect where the code is actually stuck.
Note that if your top level VIs are the ones which are reentrant, you will need to open a reference to the clone, and that's not listed in the All VIs In Memory property, although there are some ways around that. You can try to open N references in a loop using MyVI.vi:# as the VI name and ignore those which return an error, but you should note that the numbers don't necessarily start from 1 and that NI might close up the option to get the clone references like that.
You could also try closing the main VI to unload it and then opening a new one and looking at the Unopened SubVIs hierarchy, which should list all of the clones. I'm assuming that if the main VI is unloaded, only the clones which are still running will still be in memory, but that might change if you have classes (which don't unload) and I haven't actually tried this myself.
Try to take over the world!

Keep dll running and waiting for parameters

Hello!
I am for the first time in this forum, sorry if something wrong.
My problem:
I have a labview aplication, which needs to pass several parameters during the run to a .dll(c++). The .dll has to remember all the values sent in different time moments,execute some calculations and answer to the VI every time parameters arrive. All the values passed are integers.
I know how to run the .dll from vi, pass parameters and receive answer, but every time i pass the parameters, the .dll starts again and does not remember parameters sent before.
I use next line to get parameters from vi to .dll:
extern "C" __declspec(dllexport)int Myfunction( int a, int b, int c );
The other way I thought of would be to save the values to a .txt file, but this isn't certainly optimal solution.
It would be best, if the .dll would run simultaneously with the vi and listen for parameters and answer, when needed.
Please help, thanks.
Message Edited by redblue on 10-19-2009 01:50 PM

Hi there,
Ironically, I just posted a very similar query here - today as well! (didn't find this one during my initial search...):
http://forums.ni.com/ni/board/message?board.id=170&message.id=449082#M449082
If you just want single strings/values, then the event posting definitely works okay (I don't know how many events per second it can handle though, if you need high data rates).
Anyhow, I suggest you have a look at:
http://zone.ni.com/devzone/cda/epd/p/id/1480
and
http://forums.ni.com/ni/board/message?board.id=170&thread.id=332674
(I don't know why I failed with passing 1D arrays, given that strings work... )
Regards, MT

Run a code for all records

Dear all, please tell me how can I perform a code save for all records in ms dynamics crm 2011. (I've changed part of a code and need it work for all old records)

Andrii thanks for your reply, but it will not work. In this case I work with a N:N connected records. I found this:
https://rajeevpentyala.wordpress.com/2012/02/05/update-record-using-odata-and-jquery-in-crm-2011/

Timed Subvi run and stop for set time

I have a program cod controlling temperature, i need subvi run for 5 minutes and stop for 5 minuts continously to controll current source supplying heater around my sample by continous pulses of mA.

Hello MaTaRaWeY
Could you be more specific, maybe use a VI with comments to help explain your problem better,
You may also like to look into the "Wait (ms)" node under the Timing Palette.
Derick Mathew

Smart Search for DVR Recording

Is there a way that I can search on a key word(s) and have something auto record when it picks up the saved keyword(s)? When I had DirecTV I used to be able to type in a keyword such as James Dean. Whenever a James Dean movie came on, or anything with his name in it was going to play, it would 'automatically' record based on the key word. I don't see where/how I can do this with FioS cable. Anyone able to help? Thanks!!

I'd like an answer to this too. I just switch from DirecTV to FiOS. Are you able to auto record a key word search? DirecTV did this by recording all hits in a Smart Search. You could also filter it as just movies or just sports.
JackinFL wrote:
Is there a way that I can search on a key word(s) and have something auto record when it picks up the saved keyword(s)? When I had DirecTV I used to be able to type in a keyword such as James Dean. Whenever a James Dean movie came on, or anything with his name in it was going to play, it would 'automatically' record based on the key word. I don't see where/how I can do this with FioS cable. Anyone able to help? Thanks!!

How can I run a check for a record across other records in the same dataset based on unique key constraint?

Dear community,
I have a flat data set which I run through a lookup and return. I want to check if at least one of the records matching a unique key constraint had a successful return without merging all the records. Can some one point me in the right direction?
Thanks!
Marc

Hi,
Sounds like a job for the Lookup Check processor!
As with all check processors, it adds a flag attribute (with a Y/N value) that denotes if the lookup was successful or not, as well as filtering records based on this at output.
Lookup Check does the same as Lookup and Return but does not return the record(s) looked up.
Also note that Lookup and Return does not actually merge records, but it does pull back the return data (which you can then split if you want a record for each).
Regards,
Mike

All Downloads named "download", iTunes keeps "resettiing-first run" and more...

     I have just copied the original text sent to Apple Support, hoping someone has had the same problems so I can compare results. Currently their is not a fix for any of my problems. I will have to manually rename, move, and add into my library each file. I will have to change preferences to what I prefer whenever they reset to defaults. All of this is very time-consuming and annoying... Please add some comments, even if you have the same problems without any "fixes" either.
Thank you,
GentleMon Todd.
...original message...
I have THREE(3) issues that are a serious problem.
Problem #1:
     The iTunes program itself keeps "resetting" itself, as if I just installed it for the first time. All my preferences reset to the defaults and the "take a tour" separate window-or-program pops up as well. I do not use a the default directory for my library and several other issues as well. I have had files disappear and reappear in a random fashion. Not mention that having to change all the preferences, and reset my AppleID account and password goes beyond annoying. Good thing this software is free...
    This can happen as much as 3 times in a day, but in the last 4 months alone, I have had to change everything at least 13 (thirteen) times. Oh yeah, just happen today, Friday, after it happen on Wednesday.
     This problems started back around "9.x" versions and has continued throughout current versions "10.x" as well. You got e-mails then, and now again.... this problem alone is enough to cause complete chaos.
Problem #2: all files are named "download"
     All podcast episodes are called "download", music and music videos are called "download". For example; download.mp4, download.m4v, download.mp3, etc. As well as not in the proper directory, see problem # 3.
Problem #3:
     All of the podcasts downloads, regardless of the podcast, is being dumped in the "library-downloads" directory. Within that particular directory I will have another directory for each single episode of each podcast downloaded. The episodes should be put in the particular PODCAST DIRECTORY not as a new directory for each episode. Not mention music goes to the music directory.
     The music downloads are doing the same thing, except for the directory has "_tmp" added to after the name of the song. within that directory is the file finally.
For example, the free video of the week download looks like this:
...iTunes Library...
     Downloads
          Don't Sit Down 'Cause I've Moved You.tmp
               download.m4v                (finally, the actually file, not under "music")
please help resolve some of these issues at hand.
GentleMon Todd

Hello, djhood17.
Thank you for the question. Try the steps in the article below regarding the reset loop you are experiencing. Start with the section labeled Constantly restarting.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Regards,
Jason H.

Sequence and procedure for updating records

I USED THE FOLLOWING CODE TO UPDATE THE COLUMNS
CURRT_USER_ID,
uPDATED_BY,
UPDATED_DATE
cURRT_USER_IS = SELECT USER FROM DUAL;
UPDATED_BY = CTUT_ID ;
UPDATED_DATE = SYSDATE
pROCEDURE COMPILED FINE AND TRIGGER CREATED FINE
bUT WHEN I UPDATE IT IS NOT UPDATING THE COLUMNS
CREATE OR REPLACE PROCEDURE UPD_CONSTITUENT(
CURRT_USER_ID out varchar2,UPDATED_DATE out DATE,UPDATED_BY out varchar2,CTUT_ID OUT NUMBER)
IS
puser varchar2(20);
pdate date;
pby varchar2(20);
pid number;
x_seq exception;
pragma exception_init(x_seq, -8004);
BEGIN
SELECT USER,SYSDATE INTO puser,pdate from dual;
CURRT_USER_ID := puser;
UPDATED_DATE := Pdate;
UPDATED_BY := ctut_id;
EXCEPTION WHEN x_seq THEN
RAISE_APPLICATION_ERROR(-8004, 'MY_SEQ has run out of numbers!');
END UPD_CONSTITUENT;
CREATE TRIGGER TU_CONSTITUENT
BEFORE INSERT ON K_CONSTITUENT FOR EACH ROW
BEGIN
UPD_CONSTITUENT(:NEW.CURRT_USER_ID,:NEW.UPDATED_DATE,:NEW.UPDATED_BY,:NEW.CTUT_ID);
END TU_CONSTITUENT;

IT WORKED FOR ME
i GAVE INSERT INSTEAD OF UPDATE

Install Elements 12, attempt to run and asks for "sign in" gives correct email, I give password, and system crashes. What should I do Return program,? Lightroom works great,

System seems unable to get registered. I am asked to "sign in" i give the correct password,system dies. I looked at my Adobe acct. and it has my lightroom correctly done, nothing for elements, can I enter this manually as the system doesn't seem to accept any other input.

Did anyone helped here? I have a similar problem but nobody seems to know how to help. Do not accept calls for Element 12 programs and the chat group cannot help either. What should we do? Why is this so hard if we are purchasing a product. I was charged on August 21st and still cannot run the program. Can some one help???????

Earphones with Remote and Mic (for Voice Recorder??)

Hello, today I find this Earphones with Remote and Mic on Apple store:
http://store.apple.com/us/product/MB770
It will work on iPod touch (2nd generation), so does it mean the voice recorder app (bought from App Store) is going to work on the iPod touch (2nd generation) as well?? Or the Mic is just working for the phone function??
Anybody know?
Thanks.
Raymond

We were talking about the $29 ones...they seem to be out of stock online (?)..the $79 haven't been released yet....
here's some real cheap ones on amazon....varying reviews....other options listed as well...
http://www.amazon.com/Stereo-Headset-Built-Microphone-Button/dp/B000VVERJI/ref=s r1_1_s9rk?ie=UTF8&s=electronics&s9r=8a10809b1c651770011c93b305dd04c4&itemPosition=1&qid =1224523249&sr=1-1

Follow Up and task for Interaction Record

we have IC Web and need to create Follow up and Task as follow up task from the interaction record.
Can you please help me find steps to configure the same,

Suki,
I was maybe a little bit too fast:-)
Goto spro->CRM->interaction center webclient->business transaction profiles.
There you find some entries, select the business transaction profile that is attachted to your ICweb main profile.
Here you have an entry trans. type where you can select your interaction record transaction type, this is considered your 'leading' transaction type. A leading transaction type is the transaction that always will be created when an interaction occurs in the webclient. If you created some entries in the copy-control customizing action for your interaction record (let's say trans type= ZINT) like I explained in earlier post, you should check that the same transaction type is used here, the ZINT.
When you select your business transaction profile you see some options on the left ('Dependent bus trans', 'assign price type and price type list' and 'content management templates').
Select 'Dependent business transactions'. Here you can enter your transaction types that are applicable for your scenarios, you see four radiobutton options 'Sales', 'Service', 'Lead' and 'complaint'. Here you can choose which transaction type to be used in what scenario. If you enter here your sales order transaction and flag 'Sales' as scenario it should appear in the follow-up dropdownlistbox in the interaction record view. (And is also used as trans type when you select 'sales order' in the navigation bar in the webclient) The same counts for complaints.
Hope it's a little bit clear now!
Regards,
Joost

Distinguishing First Run and Rerun for DVR Recording

Similar Messages

Maybe you are looking for