Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr
Hello,
I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
Lots of points awarded for answer/answers.
Any clue will help
Thank you/Afshad
Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
Edited by: Afshad Irani on Jan 15, 2009 6:19 AM
Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
Ans:
Dear Afshad,
Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
Hope it works for you.
Regards
Jibran
Similar Messages
-
VPRS Costs From Purchase Order Account Assignment To Sales Order
Hi,
If i assign a purchase order costs to a sales order using the account assignment category C or E, can the purchase order costs be passed on to VPRS condition type of the sales order?
This is different from third party order processing. I know for third party order processing the VPRS costs can be passed from the purchase order, but my above scenario is different from third party order function whereby i create a purchase order and a sales order separately and then link them using the account assignment category of the purchase order and need to know if the VPRS cost can be updated from the purchase order.
Has anyone tried this?Has anyone tried this?
I never tried this, but looks like similar to third party scenario only. You can just test the scenario to understand the system behavior. For details on how the VPRS is calculated by the system, you can refer OSS Note 372772 - How is the cost determined?
Regards, -
Purchase order with reference to Sales Order
Dear SAP Gurus,
I want to create a Purchase Order with reference to sales order.
I want to take the material in my stocks also. If i create a Purchase order with account assignment, i am able to take the inventory of that material as it is consumed at the time of GR (MIGO).
hope you understand my requirement.
AshishHi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri -
Purchase orders manily against the sales orders
My client do purchase orders manily against the sales orders... but to meet the minimumn purchase order quantity or value they club many sales orders in a single purchase order... now is there any way to track for what sales-order-item what purchase-order-item made?? (in SAP B1 2007 B PL7)
Hi
By Design ,SAP creates link between SO to PO when you create PO based on SO .
Then you can use TargetDoc which is PO Number and can be seen in row level
If it is disabled , you can enable it through form setting .
I usually ask my user to start with SO . When they are ready to make purchase , they can click on purchase check box on SO and create PO based on SO . This way the link stay as B1design .
The reason of this you can see the PO and (orrange arrow link) which can let you navigate your PO from AR module .
An other workaround ,user defined field can be used at row level and manually link
Hope this helps
Bishal -
Activating conditions for Purchase Order workflows in EBP
Dear SRMer's,
I am facing the following problem:
System Info :SRM Server 5.5, ECC 6.0
Scenario 1:
All start conditions for Purchase Order in SAP Business Workflow are activated.
I created a direct procurement shopping cart (DP) in SRM browser and ordered it, then I logged in as proffessional purchaser, changed the Price and processed the DP PO.
When Ordering, the follow on Documents are created, but says the PO is waiting for approval. When I check for this PO in the Backend R/3 system in the Me22n (Display PO changes), I don't see the PO.
Scenario 2:
All Start conditions for Purchase Order in SAP Business Workflow are de-activated
I created another direct procurement shopping cart (DP2) in SRM browser and ordered it, then I logged in as proffessional purchaser, changed the Price and processed the DP2 PO (Status is held).
When Ordering, I get the Warning message, no workflow found, contact system administrator.
Please advice what needs to be configured for the PO to be ordered successfully.
Thanks in advance
RajHi,
In your scenario 1, if system is saying that there the PO has to be approved, it means that you have managed the user that will receive the workitem..
Activating all PO WF is not a solution as in standard there are two many cases activated (amount, role, limit...)
I propose you to first activate only the 0 step WF and to overwrite the code inside
Just code that every PO modification should trigger O step WF thus it will be more simple to test it.
Later on, if you want to implement more complex starting conditions, you just have to modify the WF content...
Kind regards,
Yann -
Create purchase order with reference to Sales order Line item
Hi All,
i had a requirement that i need to create the Purchase order with reference to sales order line item...
In T.code me27 client requied a input field for sales order no and with that order reference he want the data of line item to PO creation line item screen.....
please sujjust......how to proceed......
regards,
Ravi NemaniHi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri -
Workflow issue when create Purchase Order automaticlly based on Sales Order
dear experts,
I got a problem when create purchase order automatically once the Sales Order created, the field ERNAE of the Purchase Order creatd is WF-BATCH, but we want this field to be the user log in the system, like John. Smith
it seems this is a configuration issue, but i am not familar with workflow, do you experts have any solutions?
thank you in advance.
Hongtaothank you for you reply my friend.
yes, i mean the PO creator.
I just create a SO in VA01, then change the Schedule line category from CN to CP, then SAVE, then Confirm the Delivery Proposal. after all this, the PO will be created automatically by Workflow. Because when I display the PO via ME23N, it displays [Standard PO XXXXX created by Workflow-System] on the top of the screen.
But i do not know which workflow is trigered to create the PO. and i tried SWEL like you said, there is no record listed.
do you have any other suggestions? thank you so much, friend. -
Purchase Order ME23n - communication tab - where these values stored
Dear all
Can someone tell me where the
Purchase Order ME23n - communication tab - where these values stored
I am not able to find it.
Regards,
VenkatTable EKKO. All fields in communication tab are available here
EKKO-IHREZ Your Reference
EKKO-VERKF Responsible Salesperson at Vendor's Office
EKKO-TELF1 Vendor's Telephone Number
EKKO-UNSEZ Our Reference -
How to copy Customer Sales Order number to Purchase Order for 3rd party sal
Hi experts,
We are doing third party sales. So once we create Customer Sales Orders manually via VA01, users also manually create Purchase Req for it.
We do not automatically create PR from Sales Order, as this is not my clients requirement. So we don't use item category group BANS in the material master.
In the item level in the PR under the Contact Person tab, the creation indicator shows "V Sales & distribution document". Once PR is created this updates the PR number under the item level Schedule lines in the Sales Order.
After PR creation, we run a job to create PO's.
But the new requirement from the client is to automate this PO creation thru EDI.
Our SAP is 4.6C & the Idoc type we use is ORDERS05 & Message Type is ORDERS. We are using EDIFACT std.
Once I get the idoc xml file for this PO, I find that my Customer PO number (from the Sales Order) & also the Customer Sales Order number is not copying to the xml output.
Please advise what needs to be done inorder to have it.
This will be great help & I will reward for the answers !
Rgds,
PriTables are related.
MATNR
WERKS
MBDAT
LGORT
CHARG
etc fields are common in both VBBS and VBBE.
May be you can generate a condition a fetch data using this.
I hope it helps.
thanks -
Price change condition in purchase order
Hello,
In a purchase order automatically generated from a sales order, I want a base price calculated from two conditions of the sale order
example:
In the sale order
Sale price (condition ....) = u20AC 100
Percentage (condition Z. ..) = 95%
In the purchase order, I want get:
Base price (condition Z. ..) = 95 u20AC (100 * 95%)
Do you have a solution for this (available, user-exit?)
Thank for your response .
JLCHi,
You have to use "alt base value" in procedure....based on your requirement ask your ABAPer...he will create one custom routine in V0FM...you have to use the same in procedure
Hope it may helps you.
Kuber -
How to block post price conditions in purchase order
I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your helpThe system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.
-
"In FBL5N unable to view purchase order number and the sales order number"
Hi,
Below mentioned is the problem we are facing,
In the Customer Line Item Display (FBL5N) it is vital for us to be able to view the customer's purchase order number as well as the sales order number for each billing document listed by customer.
We need to be able to extract this information for each customer and import to an excel spread sheet for analysis, specifically for our larger customers that have over 500 plus lines.
Kindly advise how to go about the same.
Regards
HarishDear,
Please also check note 152335. There, you will find a more detailed
explanation of the issue.
The only way to see some information regarding related PO-es in a Vendor
line items is a workaround. For example, it is possible to create
a substitution in order to fill in one of not currently used fields
like Reference, Text, etc.
I hope this helps You.
mauri -
Condition in purchase order not distributed in line items
Hi All,
I have a condition ZD21 (delivery charges) in purchase order. When i enter the condition at header level, it supposed to distribute the charges among line items. However sap put the entire amount in one of the line items. The condition has condition class A (surchage), Calc typ B(Fixed Amt) and B as cond cat. Header condition is selected (not item).
Sometimes system populate an amount at the header level for this delivery charge.
How can i get the amount to distribute to all line items ? Also, where is the populated amount coming from ? Anyone with any suggestions ?
thanks
joyceHi Tej,
Group condition and Header condition were selected. I noticed that for other plants, the delivery distribution works but not for this plant. This wouldn't have anything to do with plants, right ?
What is the group based on for Group Condition ? Thanks.
Edited by: Joyce Chan on Jan 10, 2012 2:54 PM -
How to block post price conditions in purchase order after doing MIGO
I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your helpThe system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.
-
Link between vendor number in purchase order and supplying plant (Sales O.)
Hi All
Please could you advise, what settings control the following:
1. Purchase order created for vendor A. (vendor- is internal supplier within same company in SAP, but different company code).
2. Sales order automatically created on vendors side, plant B.
Question is where is the link between vendor number (A) and supplying plant name (B):
How SAP identifies, what plant sales order (for created purchase order) should be generated at?
Thanks!
Regards, AndreyHi,
Click the below link for more infromation about SD & MM integration.
http://sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
regards,
Venkatesan Anandan
Maybe you are looking for
-
New applications available today for PS CC 2014, AI CC 2014 etc. but no new Bridge application to install? I installed the PS 2014 version but I just checked the Bridge version that is installed and it is 6.0.1.6. The CC menu "Apps" tab say that Bri
-
Hello. I've just bought a macbook. And rest of my family are using PC. So, is it possible to combine Airport/Airtunes and a Wireless D-link router (802.11g, 802.11b Compatible? Web: http://www.dlink.com/products/?pid=6 . I was planning to play my med
-
I've also tried opening Explorer directly and the same problem exists.
-
How to trace Allocation amoung entities ?
Dear Experts, I am using 7.0NW version. I am doing Allocation, I have 200 entities which allocation amounts to each other. I mean one entity will allocate to another entity and visa versa. Now, I would like to trace (track) the entities like which en
-
Convert mts files for editing in Final Cut?
Is there a way to convert mts files for editing in Final Cut Express or Pro?