Could not see the data in the cube
Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.
Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.
Similar Messages
-
Could not see loaded data in the Cube
Hi Gurus,
Pl. help me in this: I am not able to get teh data loaded into the cube. In PSA it is loaded right. after that I created Transformation on InfoCube and I got Proposal Generated. Then I created DTP and executed, and monitor shows green. but when I right click on the cube and look for data(also maintain master data on InfoObject), I see only the headers of the table but no data is displayed.
I hope you have similar situations. Thanking you in advance.Check if the request is reportable, sometimes the load could be fine, but the request may not be reportable. Make sure in your start routine you don't have a routine which will filter or delete the data out from the cube before it gets update.
thanks.
Wond -
Starting yesterday (I believe) we are suddenly receiving a "User not found" error when trying to view a user's profile page when clicking on their name (in search or elsewhere) via the url
https://www.contoso.org/Person.aspx?accountname=contoso%255Cmyuserlogin
This is happening for all users. (but profiles exist and seem ok, and sync with AD is running fine) When looking in the logs I see the error (full ULS log is later below)
Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database.
The only clue of what MAY be going on is just before that I see the following two lines which came up after I changed the Database logging to Verbose:
ConnectionString: 'Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][UPAPROFILEDB]' Partition:
NULL ConnectionState: Closed ConnectionTimeout: 15
SQL connection time: 0.0456 for Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]
If I am reading that correctly, does it mean the connection to the database is timing out instantly? I am able to use powershell to pull up profiles and print them to the screen while on the webservers. And it's only the one specific page that is not
working.
What sort of tests or further debugging can I do for the error above?
We are on premise, SharePoint 2013 sp1, sql2012, server 2012, claims using the full SharePoint Profiile Sychronization against AD. Farm has been running since last august. Last week the admin team did run windows update on all servers, I can't be sure
if it was broken for 5 days and no one noticed or if it broke yesterday.
I already did the following:
Verified the profiles do exist in central admin.
I can still access their personal sites directly via
https://www.contoso.org/personal/myuserlogin
I checked the ProfileDB database and made sure the service accounts for the UPA has dbowner, so does the farm account, and the web application pool has SPDataAccess.
Verified the AD sync account has proper rights in AD.
I reran a full synchronization which ran with no errors.
File systems on the webservers and appserver have plenty of free space.
Rebooted every server in farm
I even checked the bin directory of the mysite webapplication, (since once I had a weird problem where access to bin was removed.) WSS_ADMIN_WPG, WSS_RESTRICTED_WPG_W4 have full control and WSS_WPG,IIS_IUSRS all have read and execute.
I opened powershell on the webserver I can indeed load profiles and print their values.
Timestamp Area Category EventID Level Message Correlation
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.43 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=1.3859 be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.47 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.47 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.49 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|fa\cbuchholz, ClaimsCount=167 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 4224 byte file stream be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=11.7341 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2az Verbose GetPartitionPropertiesCache :: Getting Cached object be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ay Verbose GetPartitionPropertiesCache :: Found existing cache in httpcontext be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0583 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://lnkd.in/bb6rsHj. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0456 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Portal Server User Profiles ajw8l High Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database. at Microsoft.Office.Server.UserProfiles.UserProfile.Load(SqlDataReader myReader, Boolean bFirstRead, Boolean firstReaderIsViewerRights, Boolean includeColleagueRecords, Boolean includeLanguageAndRegionalSettings, Boolean shouldCloseReader) at Microsoft.Office.Server.UserProfiles.UserProfile.RetrieveUser(String strAcct, Guid gAcct, Byte[] bSid, Nullable`1 recordId, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAcct, Boolean doNotResolveToMasterAccount, Boole... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55* SharePoint Portal Server User Profiles ajw8l High ...an forceUserIsSelf, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfileManager.GetUserProfile(String strAccountName, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds) at Microsoft.SharePoint.Portal.WebControls.ProfilePropertyLoader.LoadRequestedUserProfile(String& redirectionUrl)) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General aat87 Monitorable be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,20 ajji6,3 agb9s,10 ak8dj,1 b4ly,25 adyrv,1 adyrv,4 adyrv,3 ajw8l,1 aat87,3 ajji6 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=78.9958 be11a89c-ebeb-a08d-57d2-a513d117e184Have Windows Updates been applied? See my note about this
https://twitter.com/imorrish/status/491020435039854592
Look at the URL in the search results. It may have invalid character in which case you can use this fix
http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
Regards,
Ian
http://sps.cloudapp.net
Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites -
I could not see Responsive Scaling on the properties panel ?
I could not see Responsive Scaling on the properties panel ?
Responsive scaling is available only when Stage is selected in Animate 3.0
Select 'Stage' in the 'Elements' panel,you should see Responsive scaling option in the Properties panel -
Could not see Process List in the MMC
Hi Experts,
I have freshley installed ECC 6.0 in 3 servers, when I restart or log off windows and login windows again and try to open MMC I dont see SID in the MMC, with SAPSTARTSRV.EXE I'm able to get the SID when I click the tree i could only see the process tab but when i expand it i cannot see the process list
Same thing happened to all the server, because of this we got stuck in our work,
DEV_MS
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2408] Wed Feb 25 10:42:31 2009
[Thr 2408] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2708) [msxxserv.c 1832]
[Thr 2408] load acl file = C:\usr\sap\E85\SYS\global\ms_acl_info.DAT
[Thr 2408] MsGetOwnIpAddr: my host addresses are :
[Thr 2408] 1 : [172.22.6.85] sapduetsp2.CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM (HOSTNAME)
[Thr 2408] 2 : [127.0.0.1] sapduetsp2.CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM (LOCALHOST)
[Thr 2408] MsHttpInit: full qualified hostname = sapduetsp2.CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM
[Thr 2408] HTTP logging is switch off
[Thr 2408] set HTTP state to LISTEN
[Thr 2408] MsHttpOwnDomain: own domain[1] = CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM
[Thr 2408] ms/icf_info_server : deleted
[Thr 2408] *** I listen to port sapmsE85 (3600) ***
[Thr 2408] *** I listen to internal port 3900 (3900) ***
[Thr 2408] *** HTTP port 8100 state LISTEN ***
[Thr 2408] CUSTOMER KEY: >G1759802310<
[Thr 2408] Wed Feb 25 10:43:45 2009
[Thr 2408] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sapduetsp2_E85_00 [msxxserv.c 4684]
[Thr 2408] Wed Feb 25 10:54:06 2009
[Thr 2408] *** ERROR => MsSCheckConnections: no response from client C0 (172.22.6.85) after 300 secs received [msxxserv.c 3173]
[Thr 2408] *** ERROR => MsSCheckConnections: disconnect now [172.22.6.85] [msxxserv.c 3177]
DEV_W0
trc file: "dev_w0", trc level: 1, release: "700"
Wed Feb 25 14:14:21 2009
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C CheckCodepageType: line 24520. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24520]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 68 bytes, 20000 names (31680000 bytes), 500 dynamic statements (2848000 bytes), total 34528068 bytes
C Using shared procedure name cache SAPDUETSP2_E85E85_E85_MEM initialized by another process.
C Connected to db server : [SAPDUETSP2] server_used : [np:(local)], dbname: E85, dbuser: e85
C pn_id:SAPDUETSP2_E85E85_E85
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090225 141420 SAPDUETSP2
C Warning: Env(MSSQL_SERVER) [SAPDUETSP2] <> Prof(dbs/mss/server) [sapduetsp2]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 13172]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##Y4SAPDUETSe8500000032600000000001141421]
C sloledb.cpp [ParamStmtExec,line 13172]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##Y4SAPDUETSe8500000032600000000001141421]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 1112300
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##Y4SAPDUETSe8500000032600000000001141421>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##Y4SAPDUETSe8500000032600000000001141421>
C TestConnection(1): [e85] != [dbo]
C TestConnection(1) failed with dbcode 208
C redAlert activated
B ***LOG BZA=> table SVERS does not exist on database [dblink#5 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapduetsp2_E85_00 on host sapduetsp2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Feb 25 14:14:21 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 548) [dpnttool.c 327]
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid E85
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, optimized
pid 2876
Wed Feb 25 10:42:31 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2876) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Feb 25 10:42:33 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0155.qqq.nxst) took 2 seconds
Wed Feb 25 10:42:38 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapduetsp2_E85_00 <
DpShMCreate: sizeof(wp_adm) 24416 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05DA0040, size: 4936648)
DpShMCreate: allocated sys_adm at 05DA0040
DpShMCreate: allocated wp_adm at 05DA2090
DpShMCreate: allocated tm_adm_list at 05DA7FF0
DpShMCreate: allocated tm_adm at 05DA8020
DpShMCreate: allocated wp_ca_adm at 061BAB20
DpShMCreate: allocated appc_ca_adm at 061C08E0
DpShMCreate: allocated comm_adm at 061C2820
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 062436E0
DpShMCreate: allocated gw_adm at 06243720
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06243750
DpShMCreate: allocated wall_adm at 06243758
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1499 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( sapduetsp2) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >sapduetsp2_E85_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Wed Feb 25 10:42:39 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Wed Feb 25 10:43:18 2009
ERROR => DpHdlDeadWp: W0 (pid 2696) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 2012) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 3252) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 2584) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 2280) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 2676) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 2920) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 2852) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W8 (pid 972) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W9 (pid 3312) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 3464) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 2948) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 1336) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 3636) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 836) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 3660) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W16 (pid 424) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1605
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Feb 25 10:43:28 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Please let me know if you need any further information
Thanks In Advance
MurtuzaHi,
I have checked the Database it is up and running and i have logged into sidadm user and tried but same error
Please could anyone help me as im not able to sort out this issue and everything got stuck
Thanks
Murtuza -
Some windows-user could not see all images on the print result
We have a Problem when printing images (blobObject).
We are printing all displayed images immediately on the report. The images are represented on the report by Blob objects. At runtime we create a Bitmap object in memory, which is stored in a memory stream, the byte array of MemoryStream is placed in the field of the DataSet, which has deposited on the report as BlobObjekt.
The error that occurs is that some Windows-User didnu2019t see all pictures. But without any Errormessage, the picture is still white.
All users use the same Windows-PC with the Crystal Report Version 10.2.3600.0 .
The difference between the pictures is simple:
Picture 1)
- Note: This picture appears properly
- This one exists as JPG-File on the harddisk
- We read the image, convert it into a memory stream and place the byte array in de DataSet-Field
- This images are positioned in the header and footer section
Picture 2)
- Note: this picture does not display properly
- This one is created by the application
- It is created in memory by an graphics-object
- This graphics-Object is converted into an memory stream and so on
- This images are positioned in the details section
Here are the piece of code, which is the dataset supplied with pictures. (abbreviated version)
Using stream As IO.MemoryStream = New IO.MemoryStream
Using dest As Bitmap = New Bitmap(field.Width, field.Height)
Using gd As Graphics = Graphics.FromImage(dest)
gd.Clear(Color.White)
gd.DrawImage(Source, destrect, sourcerect, GraphicsUnit.Pixel)
dest.Save(stream, System.Drawing.Imaging.ImageFormat.Bmp)
End Using
End Using
ds.Tables(datasourceTableName).Rows(j)(datasourceName) = stream.ToArray
stream.Close()
End Using
Has anyone an ideo whats going wrong?
The logic to print the images is always the same only the windows user is different.Is this a web or windows based application?
Is this happening on the same computer but with a different user? It could be a user rights issue. Try using the Process Monitor tool to see if it is highlighting any permissions issues.
Regards,
Jonathan -
Could not see the data in the report
Hi,
BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
when I am logging in another machine i am able to see the data.Please help me in solving this issue.
Thanks in Advance.
Regards,
Spandana.Spandana,
As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
Hope it should solves the issue.
If you want to see the data:(now with yellow & blue)
Select Column == properties == Read cell content as, change it to HTML.
Thank You!!
Sent from iPhone -
Not able to see the data in the report
Hi All
In my cube i am having data.But when i am running the report ,i am not able to see the data.
The error its throwing is -No Applicable data found.
what could be the problem,please provide me the idea to solve the problem.
Thanks®ards
syam prasad dasariHI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks -
I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
<mx:Form ....>
<mx:Script><![CDATA[
private function aMethod(evt:Event):void {
// code...
]]></mx:Script>
<mx:Canvas label="Tile View" width="100%" height="100%" >
<mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%" >
<mx:itemRenderer >
<mx:Component>
<mx:Image horizontalAlign="center" source="{data.url.text()}"
toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/> <!-- It causes the error -->
</mx:Component>
</mx:itemRenderer>
</mx:TileList>
<mx:Image .... complete="aMethod(event)"/> <!-- It is OK here -->
</mx:Canvas>
</mx:Form>
I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
Any suggestions?You need outerDocument, and the method cannot be private, it should be public:
complete="outerDocument.aMethod(event)"
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services -
'The data from the Infoprovider could not be checked' message
Hi,
Recently we upgraded our BI system from 3.5 to BI7. Now I am displaying the Infoset data using LISTCUBE and received the following message,
' The Data from the Infoprovider ZIS_PRMS3 involved could not be checked' where ZIS_PRMS3 is a Infoset.
However If I ignore that message I am able to see the data and query also displays proper data. But my doubt is why this message appears? and what could be the reason for this?. (Before upgrade we didnt get this type of message)
I searched in SDN and found some threads talk about this. But not able to identify the reason for the message and how to suppress it.
Infoset contains 2 ODS and 2 Infoobjects, all the join conditions are perfect. Can anybody through some light onthis.
Thanks.
V.SenthilHi Krishna,
Thanks for the reply. As mentioend I have reactivated my Infoset, but still I am receiving that message.
I dont know what could be reason still. Waiting for the replies.
Thanks,
V.Senthil -
i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....
Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.
-
The data from the InfoProvider XYZ involved could not be checked
Hi team,
i am making one infoprovider, in which i am joining one DSO with one infocube,
the dso and infocube both have data , however when i join them and create an infoset and when i do display data i receive the following message
"The data from the InfoProvider XYZ involved could not be checked", and i cant see any records
plz assist if any one has face such issues
Regards
BluskyHi,
yes i do have data, i have one issue, when join occours does it occurs on SID or actual column
Means
Table1
C1 SID
CHN 2
Table 2
C1 SID
CHN 4
Now when i join them at C1 then CHN = CHN but SID <> SID of T2 , just confused here what exactly happens in back end.. -
Why I face the error could note activate cellular date network
I have IPhone since three months, I bought it from Egypt and each time I lose the network signal then I catch it back I can't browse or use Internet at all ad I see error " could not activate cellular data network" even I didn't go abroad how can I fix that
Go to Settings > General > Network > Cellular Data should be "ON"
-
Can not see the data in the grid
Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
RegardsHi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.
Maybe you are looking for
-
We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the
-
I am trying HDMI for the first time. I have a DVI splitter connected to the Mini and a VGA cable going to one display, which works fine. Today, I got a DVI to HDMI cable and connected it to my projector. I turned off the LCD display and turned on the
-
I have a 4s I want to add and they keep making me try to buy a phone and not add my own phone--how do I get around this
-
Pointing existing RAC nodes to a fresh Shared Storage discarding old one
Hi, I have a RAC Setup with the Primary Database on Oracle 10gR2. For this setup, there is a Physical Standby Database Setup (using DataGuard configuration) also with 30min delay. Assume that the "Shared Storage" of the Primary DB fails completely. I
-
Hello All, Am not the first one to have this error, but inspite of going through the forum and installing all the packages mentioned below am getting the Make Error of INS_CTX.MK. Below is the list of packages installed and last few lines of code. Pl