Creating a DLL Driver for Use in VB

Hi,
I am trying to export a dll file for use in VB.  I used the build > dll option within my project to create a dll, but when I try to add the reference to Visual Studio, it says that it is not a valid assembly or COM component and I cannot add it.  Is there a setting I should set in the build settings to ensure this works?
Thanks,
Billy Maier

You aren't creating a .NET assembly or COM component so you are calling it incorrectly.

Similar Messages

  • How to create a dll file for lab view?

    Hello
       I want to create a DLL file for LabView. Can anyone help me in this issue?
    Regards
    Vivek 

    Please explain.
    Do you want to create a dll in another language (which one?) for use in LabVIEW or do you want to create a dll out of your LabVIEW code?
    LabVIEW Champion . Do more with less code and in less time .

  • Creating a recovery drive for a K430 computer

    Hello-I have a K430 desktop computer with a1TB HDD,12 GB Memory and Win8 64 bits. I used a !TB Seagate USB Drive for C drive backup and a 2GB Flash drive for Personal Document backup. I created a HDD image backup and a backup of my personal documents using the Lenovo procedure.. I understand that I need either a WIN8 disk or Recovery drive to boot and re-install my image file.
    I am having problems creating a Recovery Drive. I formatted the drive to NTFS and verified that the Flash Drive was recognized by my computer. I searched for Recovery Drive.exe and it appeared. However, my flash drive did not appear on the Recovery window and the Next button remained greyed out. I will check and see if I have a recovery partition.Have you developed a fix for this problem? If so, please let me know. Thanks.
    Carl W Lesesne

    Updating Creating a recovery drive for a K430 Computer
    Hello-I obtained a copy of Microsoft's Windows  Create a USB recovery drive and discovered that I do not have a recovery partition. After entering recimg/showcurrent  in a command prompt, I received a message stating that there is no active custom recovery image.
    I attempted to create a recovery partition by entering mkdir C:\RefreshImage and recimg-Create C:\RefreshImage after the Command Prompt. This resulted in the following error message: recimg-createIMage is not recognized as an internal or external command. I have reported this problem to Microsoft also. If you are aware of a fix for this problem, please let me know. Thanks.
    Carl W Lesesne

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • Internal hard drive for use as scratch disk

    Am running OS 10.4.11 on a dual core 2.3 Ghz PowerPC G5. Want to install a 2nd internal hard drive for use as a scratch disk w/ FCP and for my media files, etc. Given that I can only accomodate an SATA I drive w/ 150 Gbps transfer rate what might some decent choices be for a 500 Gb to 1 TB drive suited for video (and a PowerPC G5)? I'll also be adding an external drive for backup if anyone has any suggestions.

    Thanks for the recommendations. I had been looking at the Hitachi CinemaStar series but you have to reset the drive to SATA 1 for use w/ a G5 PowerMac. Resetting the drive, according to Hitachi, can only be done on a PC which I don't have access to. And I think that holds true for all their drives that are not strictly SATA 1.

  • Partitioning an External 320gb drive for use with Time Machine and...

    I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
    Is this possible?
    I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
    Has anyone done this before?
    Cheers-

    Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
    See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

  • Artwork doesn't transfer to my Kingston flash drive for use in my car.

    I am transferring songs to my Kingston flash drive for use in my car.  When I copy them from my folder and drop them in the flash drive the album artwork doesn't transfer.  I deleted the artwork from the songs of 1 CD, saved a jpg to my desktop and added to each individual song which works but would be crazy to do for all of the songs.  I am running ITunes 11.05. 
    I've looked in the communities but couldn't find anything about this.  Is there a way to revert back to ITunes 10?

    Placing your iPhone in the toilet was the correct thing to do but you should have purchased an android phone instead. That would have solved these issues. :-)

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • If I already created additional Apple IDs for use on my kids devices, how can I convert them to "kids" Apple IDs?

    If I already created additional Apple IDs for use on my kids devices, how can I convert them to "kids" Apple IDs?

    You can't
    Family Sharing and Apple IDs for kids
    http://support.apple.com/en-us/HT201084
    The Apple ID has it's right already set and can not be changed

  • DPC3941T USB ports -- connecting USB drive for use by home network ?

    Can the DPC3941T USB ports be used to connect / access USB hard drive for use by home network ? 

    Thanks for the prompt reply --- I had hooked it up but could never access it.  COMCAST take notice --- how do I enable these USB ports for home networking use ? 

  • How to convert java class to dll file for using in Microsoft Technology(.n)

    hey hemmj !!!!!!
    nice replying , first of all i d like to say thanks for response me so frequently..... i like such type of guy... i d never forget ur online support.
    hey buddy, i ve a problem with applet application...
    i m working on java chat server build on swing applet. As it is chat server, it is divided into two parts, one is server application and other is client application. I want to run this server app on the client server and the basic thing with this site is that it is running on .net platform(Microsoft). and the other app ll running on the client machine or end user. Now the problem is that this site would run only if the server app ll be run on server. This server app ll open the socket of server, which ll listen the request of the user...... So, the requirement is to convert this java sever class file into dll file and register this dll file with the IIS server.So, It run and stop with the IIS server.
    I ve already search the way to convert the java class file into dll file. This is possible in such way........... below code is for the java class file...
    import java.net.*;
    import java.io.*;
    import java.util.*;
    public class chatServer
    public static void main(String args[]) throws Exception
                        ServerSocket sersoc=new ServerSocket(1234);// Any port number above 1000 should do
    // as most ports below 1000 are used by system
    Vector socvec=new Vector();
    String data="";int i,j=0;
    BufferedReader in;
    //System.out.println("Listening of port " + sersoc.getLocalPort());
    //System.out.println("Waiting for connections...");
    while(true)
    Socket soc=sersoc.accept();
    socvec.addElement(soc);
    chatServerReadThread csrt=new chatServerReadThread(socvec, soc);
    in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
    PrintStream out=new PrintStream(soc.getOutputStream());
    out.println("Connected to chat server");
    out.flush();
    data= in.readLine();
    for(i=0;i<socvec.size();i++)
    soc=(Socket)socvec.elementAt(i);
    out=new PrintStream(soc.getOutputStream());
    out.println(data + " connected");
    out.flush();
    //System.out.println(data + " connected");
    csrt.start(); // error is comming from here..... plz help me.
    class chatServerReadThread extends Thread
    Vector socvec;
    PrintStream out;
    chatServerReadThread(Vector socvec, Socket soc)
    this.socvec=socvec;
    try
    out=new PrintStream(soc.getOutputStream());
    }catch(Exception e){}
    public void run()
    try
    String data;
    Socket soc;
    BufferedReader in;
    while(true)
    for(int i=0;i<socvec.size();i++)
    soc=(Socket)socvec.elementAt(i);
    in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
    if(in.ready())
    try
    data=in.readLine();
    if(data.charAt(0) == ']')
    data = in.readLine() + " exited";
    //System.out.println(data);
    socvec.removeElement(soc);
    for(int e=0;e<socvec.size();e++)
    soc=(Socket)socvec.elementAt(e);
    out=new PrintStream(soc.getOutputStream());
    out.println(data);
    out.flush();
    else
    for(int e=0;e<socvec.size();e++)
    soc=(Socket)socvec.elementAt(e);
    out=new PrintStream(soc.getOutputStream());
    out.println(data);
    out.flush();
    }catch(Exception e){socvec.removeElement(soc);}
    }catch(Exception e){e.printStackTrace();}
    first i ve made the jar file of this class
    jar cvf chatServer.jar chatServer.classafter getting the jar chatServer.jar. I ve opened the .net dos prompt and
    type this command which ll make dll file automatically....
    > jbimp /t:library chatServer.jar
    And you'll see the following output:
    Microsoft (R) Java-language bytecode to MSIL converter version 1.1.4322.0
    for Microsoft (R) .NET Framework version 1.1.4322
    Copyright (C) Microsoft Corp 2000-2002. All rights reserved.
    Created chatServer.dll
    I cant get the problem origin from where it is comming, when i tried to convert it into .dll file it shown an error that, it did not recongnized the method in first class
    public static void chatServerReadThread.start() method
    is not recognized by .net dos prompt commnad. But when i omit this method it gets created the .dll file. This start method is basically the default method of thread class that run the thread from the same class..
    By vewing the code u can visulize the thing,, i ve marked the code from where the error is comming.
    Plz do it as soon as possible, i ll waiting for ur reply......
    I ll be really thanking u for that....
    Thanx and regards
    Niraj Kumar Singh

    I wonder if this will work:
    jbimp /t:exe chatServer.jar
    Your chatServer is an application that can be started from the commandline.
    A dll is a library to be used in com, com+, other executables or ....

  • Has anyone created a device driver for the DG101 Programmable Delay Generator?

    I am wondering if anyone has written a LabVIEW driver for the DG101 Programmable Delay Generator third party device?

    I have looked at the instrument driver network and there is nothing listed there.  The board comes with the source code for the device as well as a gui to run under windows but I am working on the PXI-8196 embedded controller running a RTOS so the .dll that comes with the board is not compatible.   I have been on the phone and email with NI over the last 3-4 weeks trying to figure out how to import the .dll, how to wrap the .dll, and how to create a new .dll.  I spoke with someone yesterday and they told me that I would have to write a register level interface driver to work with the board and that it is very difficult for even the most experienced person.  They suggested I outsource it but I was just curious, seeing that this board belongs to a very small community of programmable delay generators, that someone may have written a driver that is available.
    Thanks,
    Tracy L.
    Message Edited by Tracy L. on 09-19-2006 11:48 AM

  • Hard drives for use with Logic

    Anyone have any opinions on the best hard drives for both the project files, as well as extra external drives for keeping samples on? I'm pretty sure that at this point, my hard drives are creating more system locks than my processing speed.
    According to the "activity monitor" my processing and RAM are definitely not working to capacity.
    Is there a threshold where drive capacity gets too big and starts to affect performance, or does it really not matter?
    Thanks,
    -jeff

    I've used a lot of lacies but I don't recommend them anymore and won't buy one the next time I get a drive. too many things have gone wrong with them over time, I have a hard time trusting them. I currently use a lacie 500GB d2 drive (the long one with triple interface) for my sound library and project files using FW800. so far so good, but it will be relegated to backup drive as soon as I get a g-tech drive.
    I'm probably going to go for a G-RAID 500GB. I'm even considering getting an e-SATA one to use with my MBP using an e-SATA card.. I like the idea of having desktop-class data throughput. and also I've been eyeing off the liquid mix for my MBP, so having the firewire bus totally free for that would be not a bad idea at all..
    I've head nothing but good reports about g-tech drives, the only bad thing is that there never seems to be any stock available, you always have to back order. maybe this is a good sign?
    I'd second the opinion already posted that as far as firewire goes, g-tech are the best choice for serious work.

  • How to create a bootable drive for 10.5.8 Leopard?

    I wonder if I can use the DVDs following the machine with the Old system of Leopard in order to create a boot drive when my system now is updated to 10.5.8?
    Not sure where those recovery disks / system disks are.
    Can I createa a boot disc or drive for 10.5.8 without the installation disks?
    Or can I create a boot disc from the existing system files on my mac?

    Simen Myrberget wrote:
    Ok. Just to be sure, my Macintosh Hd now contains 180GB of data and the total size is 240GB. So Superduper will "understand" based on my settings? that Superduper is only suppose to make a boot of the system and utilites not the entire 180 GB of information?
    No, I'm afraid not. It will clone everything.
    I forgot that you don't have the DVDs. This is how you'd get a system only boot drive.
    Simen Myrberget wrote:
    I can make this with a partation size on another drive of about 40GB?
    If you had a way of getting a fresh install I know from experience that a 20GB partition would work, (maybe smaller).
    Best way is get an ext HD of at least 240GB ideally. Clone it, (and boot from it to check it works). Boot back into your regular drive and do the update on that. Is this clone your only backup strategy?

  • I recently purchase macbook air with OS 10.10.2. I want to use my Seagate external backup plus hard drive for time machine back up. How to partition my 1TB Seagate back up plus hard drive for use with mac and windows pc?

    Hi All,
    I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.

    I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
    Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now.  In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want.  TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme.

Maybe you are looking for