Deviation bars in legend

How can I remove the deviation bars for my measurement data out of the legend. If I add x and y deviations to my data I also get a deviation cross in the legend above the signs (Square, circle etc.).

Hello Les,
The legend is designed to show the curve the way it's displayed in the diagram. If it has error bars, it will have error bars in the legend. That's a design feature of DIAdem and neither a bug nor a failure in the program. I have included an example that shows how this makes perfect sense below:
Now, I realize that doesn't solve your issue, so here is a work around for your specific situation. Here are the steps:
1. For each curve you wish to put into the legend, create a copy in the "Curve and Axis Definition" dialog using the "Copy Entry" button as shown in the red bubble in the picture below. Repeat for each curve that needs to be in the legend.
2. Click on the "Type" icon in the curve list for each curve you wish to add to the legend and turn OFF the error bars.
3. When you have done that for each copy of each curve you want to add to the legend, click on the "Settings ..." dialog next to the Legend entry and follow the steps shown in the screenshot of the
Legend settings:
1. Switch to the "Labels" tab.
2.Turn off the channels that contain the error bars and only leave the ones that have no error bars checked.
Result:
I hope this helps answer your question ..
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

Scroll bar on legend for xy graph

Is there a way to create a scroll bar for the legend of an XY graph? The number of entries in the legend will be changing programmatically so the legend needs to be able to grow dynamically (which I have figured out how to do using property nodes). Any ideas?
Cheers
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Ultimately I will have 6 xy graphs in my vi, I would like to have a seperate scroll bar for the legend of each graph. Each graphs legend will both grow and shrink as the program runs and I would like to use the scroll bar to keep the legend from growing off of the screen. I would like to be able to dislpay the data from the point (6 m/s for example) along with its symbol on the xy graph (red dot for example) in the legend. If I am umderstanding you correctly I need to bundle the type and color of the plot into a cluster with the data and then link that cluster to the scroll bar, I assume I can read the property node for each data point (setting it to active plot first) for both plot style and color? Let me know if I am thinking about this correctly or if I have misinterpreted what you are saying. Thank you very much for your help!
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Bar graph legend problem

Hi I am using JDeveloper Studio Edition Version 11.1.1.3.0.
My problem is that I have made a bar graph inside an af:showDetailItem but the legends isn´t shown correct. I can´t see the legends at all when I place the legends in the bottom and if I place them in the right I can see half of the text. The source code is below. If someone can see something wrong in this code don´t hesitate to point it out or if someone know how to get this to work please let me know. To me it looks like a bug but I could be wrong.
<af:showDetailItem text="Søgulig gongd" id="sdi8"
stretchChildren="first">
<dvt:barGraph id="barGraph1"
value="#{bindings.TrxBrw360JLHistoryGraphRO1.graphModel}"
subType="BAR_VERT_STACK"
partialTriggers="::pc1:t1"
dynamicResize="DYNAMIC_SIZE">
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis/>
<dvt:legendArea automaticPlacement="AP_NEVER"
position="LAP_BOTTOM"/>
<dvt:o1Title id="o1Title1" text="Tíðarskeið"/>
<dvt:y1Title id="y1Title1" text="Upphædd"/>
</dvt:barGraph>
</af:showDetailItem>

Hi,
I stumpled accross this thread and fear I will hit the same problem with a new customer request.
Has a bug been filled for this?
Could not find anything relevant in metalink.
regards
Peter

Chart (stacked bars) - corresponding legend

hi everyone,
i've got the following situation: I'm creating an vertical stacked bar chart (type:BAR_VERT_STACK) with the following code:
<DataValues>
<xsl:for-each-group select=".//ROW[COUNTRY!='']" group-by="COUNTRY">
<xsl:sort select="COUNTRY" order="DESCENDING"/>
<xsl:variable name="my_country" select="COUNTRY"/>
<RowData>
<xsl:for-each-group select="../ROW[MONTH!='']" group-by="MONTH">
<xsl:variable name="my_month" select="MONTH"/>
<Cell><xsl:value-of select="../ROW[COUNTRY=$my_country] [MONTH=$my_month]/AMOUNT"/></Cell> </xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
and the legend:
<RowLabels>
<xsl:for-each-group select=".//ROW" group-by="COUNTRY">
<xsl:sort select="COUNTRY"/>
<Label><xsl:value-of select="current-group()/COUNTRY"/></Label>
</xsl:for-each-group>
</RowLabels>
everything works fine, but my problem is, that the created stacks are not in the same order as my legend .... so, if my first stack for example shows US, then the last item of the legend should show US as well.
does anyone know how to create this behaviour?
thanks

Mike,
thanks - I am aware of the stacked barcharts - the question is, if this type is available in a clustered manner as well ?
I so far cud only see either "stacked barcharts" or "clustered barcharts" - but not "clustered , stacked barcharts" which wud be series of stacked barcharts ...
TIA
Bernhard

Adding standard deviation bars to graphs

I have composed a bar graph on numbers, and have already calculated the standard deviation of my data. How do I add the standard deviation lines to each bar on my graph? Thank you.

Details available in *_Numbers User Guide_*, page #148 in the English version.
Yvan KOENIG (VALLAURIS, France) lundi 6 décembre 2010 16:44:20

Standard deviation bars in pages graph

I am trying to input SDs in my graph for my control and experiment. The SDs are in the 10e-5 range. I chose postive/negative but cannot enter a value less than one for the SD. In addition I have two extra SD bars on my graph.

Could you post a screen shot of your Table and your Chart? It's difficult to answer without any context.
Jerry

Chart Legend issues

Is there a way to force a Bar Chart legend in Crystal Report 11.5 to display its objects in a particular order?
For Example, say I am reporting on the consumption of "Bananas" and "Apples" by State. The Bar Chart should display the percentage of people who eat these fruits by county (Percent Bar Chart). The "Apples" percentage always displays on top of the bar chart and the "Bananas" on the bottom. The legend for this graph also displays the "Apple" color first, then the "Banana" color. However, if the "Banana" percentage is 0% the legend displays the "Banana" color first on the legend. This creates a inconsistent report (with plenty of complaints).
I would like the "Banana" color to always display second in the legend. Hope I didn't confuse anyone and any ideas would be helpful.
Thanks in advance!

Can you post an example .rpt (saved with data)?
I can throw it up in the debugger and see what's going on.
-[Dan3D|http://www.threedgraphics.com] (who quite possibly wrote the legend code many years ago).

How to put std dev error bars in a chart

Page 141 of the Keynote User Guide states that error bars can be shown on plotted series data. Can anyone get this to work as expected with standard deviation bars for each plotted mean value? I spoke with an Apple Tech Rep today who supposedly knows Keynote well, but he could not get std dev error bars to display properly on a line chart.
Numbers has the same instructions as Keynote and seems to be designed to work the same way.

"Properly" means placing the error bars around the mean values for each data point in a series. In my case, the x-axis is time in minutes and the y-axis is concentration of a chemical.

Custom Clickable Charts Objects and Legends

Hi,
The Requirement is a little bit weird but urgent as well .
Well all I need is a complete flexible chart where each element on x-axis or each element on y-axis is clickable. Also, considering I am using a bar chart. I would want to click on the bar and get more details on the Data giving deep analysis on how we got such a number.
Even the legend of the graph should be clickable in this case.
For Example
In This case Gold, Silver and Bronze on the legend should be clickable which would generate more data.
Also, 'USA','China','Russia' and the bars depicting the corresponding values should be clickable.
Please let me know if I am not clear.
Many Thanks,
Piyush

You can click on Bars and legend with help of default change & click properties like below:
<mx:ColumnChart id="myChart"
        dataProvider="{YourDataProvider}"
        selectionMode="single" ///or multiple as you wish
        change="Alert.show('hi i am Bar')"
     >
<mx:Legend dataProvider="{YourDataProvider}" click="Alert.show('hi i am legend')"/>   .// in place of alert you can call your Function
While for Axis click I think probably you have to use AxisRenderers but still i am not sure if renderers support click or not.
check this
http://livedocs.adobe.com/flex/3/langref/mx/charts/AxisRenderer.html
it may help.
If this post answers your question or helps, please mark it as such.
Cheers,
Prad.

Help with a VERY DIFFICULT Query. Anyone up for the task?

Hi, I have been struggling with this query for a week now and have made a little progress but not much: I apoligize for the long post but it needs explanation. Let me set up the question first.
I have a query that needs to run for a crystal report graph per supplier. This report is run ONCE per supplier(per record) and will return the current supplier's name, commodity(manufacturing part type) and index points(parts that have failures). It will also return all of the other suppliers with the same commodity, their index points, and a BLANK entry for their supplier name. The purpose of this is so that the supplier can see our companies ranking of suppliers by commodity, but should only know where they are ranked, not other suppliers. So in the bar graph legend, on the x-axis all you will see is a single label(the report's current record...supplier). Now for the table setup.
The query pulls from three tables:
1. VEN_LOC , master supplier table, includes all of our supplier's ID's(PK) and names
2. C_VENCOM , detached table, includes all of our supplier's ID's and commodity PK is (SupplierID,commodity)
3. QA_OCC , detached table, entries in this table are only inserted when there is a failure occurrence(index points). If a supplier does not have any failures during a specific date range (column OCCDATE) then there will be no records for that supplier in this table...this is where my problem comes from. Please read to end to understand problem.
Now for the query. Notice the union...the first part returns the current supplier's ID, name, commodity, and indexpoints. The second half of the query is what returns every other supplier with the same commodity, but returns '' for the supplier's name:
select supname,commodity,ip from(
select supname,commodity,ip from
(select v.name as supname, c.commodity, sum(q.indexpoints+q.lateindexpoints) as ip
from qa_occ q, c_vencom c, ven_loc v
where q.occdate between to_date('4/1/2006','mm/dd/yyyy')
and to_date('3/31/2007','mm/dd/yyyy')
and v.vendor='10063'
and v.vendor=c.vendor
and c.vendor=q.supplier
and v.ven_loc=c.pur_loc
and c.pur_loc=q.SUPPLIERLOC
group by v.name, c.commodity)
union
select '' as supname,commodity,ip from
(select v.name as supname, c.commodity, sum(q.indexpoints+q.lateindexpoints) as ip
from qa_occ q, c_vencom c, ven_loc v
where q.occdate between to_date('4/1/2006','mm/dd/yyyy')
and to_date('3/31/2007','mm/dd/yyyy')
and v.vendor<>'10063'
and v.vendor=c.vendor
and c.vendor=q.supplier
group by v.name, c.commodity)
order by commodity, ip desc) qa
where qa.commodity in (
select commodity from c_vencom
where vendor='10063')
group by commodity,supname,ip
order by commodity,supname,ip
This will return the following recordset:
SUPNAME      COMMODITY     IP
KF Corp.      FASTENER     63
     FASTENER     12
     FASTENER     33
     FASTENER     126
     FASTENER     153
KF Corp.      RUBBER      63
     RUBBER     12
     RUBBER      226
     RUBBER      259
This works like it should....
But... Here is where it gets really really tricky for me and the problem. Even if a supplier has no index points for a given date range, I still have to return a recordset with the supplier's name, commodity, and indexpoints of zero along with all other suppliers but names as ''.
So.. for example, one of our suppliers with ID# 10143 has no index points during the date range 4/1/2006-3/31/2007 so there are zero entries for this supplier in QA_OCC. Therefore the query returns only the other suppliers with this commodity but without 10143's suppliername, commodity, or index points of zero. so:
SUPNAME     COMMODITY     IP
     PLASTIC      12
     PLASTIC      45
     PLASTIC      51
     PLASTIC      78
When it should return no matter what:
SUPNAME     COMMODITY     IP
Emhart PLASTIC 0
     PLASTIC      12
     PLASTIC      45
     PLASTIC      51
     PLASTIC      78
Understand? If you need further info don't hesitate to e-mail me at [email protected]. Thank you.
Eric

Thanks but it doesnt change the results. Still not returning the supplier that has no records in QA_OCC..HOWEVER it is returning an extra result, still without name or 0 indexpoints though
SUPNAME     COMMODITY     IP
     PLASTIC     12
     PLASTIC     45
     PLASTIC     51
     PLASTIC     78
     PLASTIC
select supname,commodity,ip from(
select supname,commodity,ip from
select v.name as supname, c.commodity, sum(q.indexpoints+q.lateindexpoints) as ip
from qa_occ q right outer join glovia_prod.c_vencom@gl7test c
on q.occdate between to_date('4/1/2006','mm/dd/yyyy')
and to_date ('3/31/2007','mm/dd/yyyy')
and c.vendor=q.supplier
join glovia_prod.ven_loc v on v.vendor=c.vendor
-- from qa_occ q, glovia_prod.c_vencom@gl7test c, glovia_prod.ven_loc v
--where q.occdate between to_date('4/1/2006','mm/dd/yyyy')
-- and to_date('3/31/2007','mm/dd/yyyy')
and v.vendor='10143'
-- and v.vendor=c.vendor
-- and c.vendor=q.supplier
and v.ven_loc=c.pur_loc
and c.pur_loc=q.SUPPLIERLOC
group by v.name, c.commodity)
union
select '' as supname,commodity,ip from
(select v.name as supname, c.commodity, sum(q.indexpoints+q.lateindexpoints) as ip
from qa_occ q right outer join glovia_prod.c_vencom@gl7test c
on q.occdate between to_date('4/1/2006','mm/dd/yyyy')
and to_date ('3/31/2007','mm/dd/yyyy')
and c.vendor=q.supplier
join glovia_prod.ven_loc v on v.vendor=c.vendor
and v.vendor<>'10143'
group by v.name, c.commodity)
order by commodity, ip desc) qa
where qa.commodity in (
select commodity from glovia_prod.c_vencom@gl7test
where vendor='10143')
group by commodity,supname,ip
order by commodity,supname,ip

Adding a scroll bar to the legend in flex 4

How can i add a scroll bar to the legend in Flex 4?
I am to scroll the bars in the bar chart but i am unable to scroll the legend items.
Can anybody help me out as soon as possible?

Hello,
The feature you are looking for is not there in Adobe Muse.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
You might see this feature in future releases of Adobe Muse.
Hope this helps.
Regards,
Sachin

Chart legend scroll bar

Hi,
i have a chart and legend in a panel..
when there are more than 20+(depends on size of the panel and
in my case it is around 20) legend items, legend items occupies
most of the place and which in turn shrinking chart..(so chart is
not clear in this case).
can i have something like, "add a scroll bar to the legend..,
if it is shrinking the chart more than 50% of the actual size of
panel..??
thanks
siva

You could wrap the legend in a vBox or hBox as
appropriatte

XY Graph, 2D Error Bar, Legend, Multi Plot Help? Please modify the VI

PLEASE READ THE ENTIRE POST and HELP!
Please help with this VI and make it an instructive example for me and other novices like me who come across this typical example.
A typical problem in plotting data is as follows: On the SAME plot (Y-axis = Amplitude vs. X-axis = Time), plot the curves Amp1, Amp2, Amp3, ... coming from sample1, sample2, sample3, ...
Furthermore, there is Error1, Error2, Error3, ... associated with Amp1, Amp2, Amp3,...., which also needs to be plotted. In order to distinguish between these curves, one may use different
colors and show a legend that reads Amp1 (say black), Amp2 (say red), and Amp3 (say green). The plot then becomes complete and conveys data very conveniently.
The attached VI makes an attempt to plot Amp1 and Amp2 using XY Graph and also 2D Error Bar plot (to show error bars). There is one slight problem. The legend does not show what it is supposed
to show. Can someone fix this? If I plot two curves, the legend should show Amp1 and Amp2, if I plot three curves, the legend should show Amp1, Amp2, Amp3, and so on.
I don't want to see the default Plot 0, Plot 1, or whatever. Also, it would be nice to dynamically control the symbol, color, curve style etc, as we keep adding more and more curves to the plot.
Once this problem is fixed, I know I can easily extend it to make it plot more than just two curves in a dynamic way. I could use for loops with shift registers, etc to plot any number of curves on a single plot.
Believe me, I have searched for other posts and cannot find a simple example like the one I have posted here. Many examples I found have confused me more than helped me.
I believe that if this problem is solved in a simple way, many others will find this example very instructive. So by helping me, you help many other people as well!
Thank you in advance. Please see the attached files (the VI, and an example data file that I just created)
Solved!
Go to Solution.
Attachments:
Multi_Plot_Legend_Error_Bar.vi ‏24 KB
data.txt ‏2 KB

Some members have pointed out that this problem has already been resolved (see the link below).
http://forums.ni.com/t5/LabVIEW/Dinamically-handle-legend-names-using-property-nodes/td-p/1479572
I did verify that this works for XY Graph, but not for 2D Error Plot.
I need both legend and error bars. Shame on LabVIEW for not making such a basic plotting requirement easy and trasparent.
There are many clever people who can find work arounds, but that is a not a correct approach.

Stacked Bar Chart - Hiding legends with 0 values

I'm using Crystal Reports 2008, building a report that will eventaully be called from an ASP.NET page.
I've built a stacked bar chart that is displaying values per month of the number of various vehicle types. The X values are the months, the Y values are the number of each vehicle type and the stacked series are each different vehicle type. However, depending on the months that the user asks for, there may be some vehicle types that do not have any data, thus the number is 0. Is there a way for the report to see that there is 0 data for this vehicle type and thus not include it in the legend of the various vehicle types?
First time poster, so hopefully I explained everything well enough. I searched the forums for anything matching Stacked Bar Chart and did not find anything. I don't know how to find/query SAPNotes.
Thanks.

Thanks for the response, but I'm not familar with Alters? Could you describe a bit more? I didn't see anything in the documentation about it.

Return Links at top of Report? Legend Labels on Bar Chart Rollovers?

Hi,
I have two questions.
1. Is there a way to easily put the 'Return' links at the top of all reports? i.e. is there a template I can edit to do this to all my reports? I have hundreds of reports and changing them all by hand by putting a static text with HTML isn't really an option for me.
2. Is there a way to show the Legend value when you hover over a Bar on a Bar Chart. I'm pretty sure pie charts do this, but in my Bar Chart, hovering over the individual bars only shows the value. I would like for it to also show which legend item it is when a user hovers over.
Thanks,
Kevin

Kevin,
I was looking into the issue. I can confirm that the scid code that's generated is dynamic.
I also looked into the return link - the code is the following (you already know this).
td class="ResultLinksCell"><a href="javascript:void(null)" onclick="return ViewBack('d:dashboard~p:9md8uku78u84kdge~r:kug9avdjlblr24fq','DrillBack','1pnm8a1lmln3ml08v6lil3d8gi');" title="Return to the previous page" name="SectionElements">Return</a</tdI checked several JS files in OracleBI\web\app\res\b_mozilla folder - tableview.js, viewhelper.js- although I found the function responsible for Return link (viewback) - I couldn't find the xml where you'd need to put that link in front of the following code - div id="idResultsTableParent"><table id="saw_146_3" class="ResultsTable" I suggest you search for the place in xml where it's generating table view and put the return link on top of the table.
Edited by: wildmight on Apr 14, 2009 8:04 AM

Deviation bars in legend

Similar Messages

Maybe you are looking for