Discoverer 4i Plus returns no data when using views with db link references

I am using Discoverer 41 Plus to view reports online.
When I create a worksheet based on a view, that only references local tables, everything is OK and Disco plus shows the output OK.
When I create a worksheet based on a view, that references a Database link, Disco plus gives me an "Query caused no data to be returned" error.
Is this to be expected from Discoverer Plus?
Thanks - Sue.

I'm wondering if this has anything to do with the default position (and default aggregate) for the EUL folder item? I can see that some of the folders have number type items with default position 'Data Point' and others have these with default position of 'Top or Side'. I'm totally stabbing around in the dark here; looking at EUL folders which exhibit the problem and those which don't.
I've tried changing one field to 'Data Point' and it hasn't helped. Will try changing the join items now I think.
If anyone has any comments, would be v. grateful as I'm looking at dropping folders which have quite a bit of code around them and trying to re-create them exactly, which is a risky and horrible solution.

Similar Messages

Return key disabled when using safari with Mavericks OS X

Hi,
Has anyone got a way to use return key when using safari??

niall1111 wrote:
It is,and always was, the return key that did this in snow leopard and other operating systems!
??? I have two Macs that can run Snow Leopard & in neither of them does the return key take me back a page. Also, nowhere in the lists of keyboard shortcuts for OS X or any of the browsers I use (Safari, Firefox, & Chrome) is the return key mentioned as providing this shortcut.
Some web pages may have been programmed to respond to the return key that way, but not many I have ever encountered are. I guess it is possible some extension or other third party add-on might provide that function, but itis definitely not something that has ever been built into OS X or any of the common browsers used with it.
In Safari (on Snow Leopard, Lion, Mountain Lion, & Mavericks) two keyboard shortcuts are provided by default to go back a page: one is the CMD-[ combination Barney already mentioned. The other is CMD + the left cursor key. Likewise, CMD+] or CMD + the right cursor key will take you forward a page (if you have previously gone back to a previous page).

Inconsistent SQL results when using View with UNION-ALL and table function

Can any of you please execute the below scripts and check the output. In the table type variable, I am adding 4 distinct object ids, where as in the result, I get only the row pertaining to last id in the table type variable. Same row is returned 4 times (4= number of values in the table type).
This scenario is occurring in our product with a SQL with exactly same pattern. I could simulate the same issue with the sample script I have provided.
Database version: 11.2.0.3 Enterprise Edition, Single node
Thank you.
CREATE TABLE TEMP_T1 AS SELECT * FROM ALL_OBJECTS;
CREATE TABLE TEMP_T2 AS SELECT * FROM ALL_OBJECTS;
UPDATE TEMP_T2 SET OBJECT_ID = OBJECT_ID * 37;
CREATE UNIQUE INDEX TEMP_T1_U1 ON TEMP_T1(OBJECT_ID);
CREATE UNIQUE INDEX TEMP_T2_U1 ON TEMP_T2(OBJECT_ID);
CREATE OR REPLACE VIEW TEMP_T1T2_V AS
SELECT * FROM TEMP_T1 UNION ALL SELECT * FROM TEMP_T2;
CREATE OR REPLACE TYPE TEMP_OBJ_TYPE AS OBJECT (OBJ_ID NUMBER);
CREATE OR REPLACE TYPE TEMP_OBJ_TAB_TYPE IS TABLE OF TEMP_OBJ_TYPE;
SET SERVEROUTPUT ON;
DECLARE
TYPE TEMP_T1T2_V_ROW_TAB_TYPE IS TABLE OF TEMP_T1T2_V%ROWTYPE;
TEMP_T1T2_V_ROW_TAB TEMP_T1T2_V_ROW_TAB_TYPE;
TEMP_OBJ_TAB TEMP_OBJ_TAB_TYPE := TEMP_OBJ_TAB_TYPE();
PROCEDURE ADD_TO_TEMP_OBJ_TAB(OBJ_ID IN NUMBER) IS
BEGIN
TEMP_OBJ_TAB.EXTEND;
TEMP_OBJ_TAB(TEMP_OBJ_TAB.LAST) := TEMP_OBJ_TYPE(OBJ_ID);
END;
BEGIN
ADD_TO_TEMP_OBJ_TAB(100);
ADD_TO_TEMP_OBJ_TAB(116);
ADD_TO_TEMP_OBJ_TAB(279);
ADD_TO_TEMP_OBJ_TAB(364);
DBMS_OUTPUT.PUT_LINE('=====================');
FOR I IN TEMP_OBJ_TAB.FIRST..TEMP_OBJ_TAB.LAST
LOOP
DBMS_OUTPUT.PUT_LINE('OBJ_ID = '||TEMP_OBJ_TAB(I).OBJ_ID);
END LOOP;
DBMS_OUTPUT.PUT_LINE('---------------------');
SELECT * BULK COLLECT INTO TEMP_T1T2_V_ROW_TAB
FROM TEMP_T1T2_V VW
WHERE ((VW.OBJECT_ID) IN (SELECT OBJ_ID
FROM TABLE(CAST(TEMP_OBJ_TAB AS TEMP_OBJ_TAB_TYPE))));
FOR I IN TEMP_OBJ_TAB.FIRST..TEMP_OBJ_TAB.LAST
LOOP
DBMS_OUTPUT.PUT_LINE('OBJ_ID = '||TEMP_OBJ_TAB(I).OBJ_ID);
END LOOP;
DBMS_OUTPUT.PUT_LINE('---------------------');
IF TEMP_T1T2_V_ROW_TAB.COUNT > 0 THEN
FOR I IN TEMP_T1T2_V_ROW_TAB.FIRST..TEMP_T1T2_V_ROW_TAB.LAST
LOOP
DBMS_OUTPUT.PUT_LINE(TEMP_T1T2_V_ROW_TAB(I).OBJECT_ID||' : '||TEMP_T1T2_V_ROW_TAB(I).OBJECT_NAME);
END LOOP;
ELSE
DBMS_OUTPUT.PUT_LINE('NO ROWS RETURNED!');
END IF;
DBMS_OUTPUT.PUT_LINE('---------------------');
END;
/

I can reproduce it:
SQL*Plus: Release 11.2.0.3.0 Production on Tue Oct 30 14:05:39 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select *
2    from v$version
3 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> CREATE TABLE TEMP_T1 AS SELECT * FROM ALL_OBJECTS;
Table created.
SQL>
SQL> CREATE TABLE TEMP_T2 AS SELECT * FROM ALL_OBJECTS;
Table created.
SQL>
SQL> UPDATE TEMP_T2 SET OBJECT_ID = OBJECT_ID * 37;
72883 rows updated.
SQL>
SQL> CREATE UNIQUE INDEX TEMP_T1_U1 ON TEMP_T1(OBJECT_ID);
Index created.
SQL>
SQL> CREATE UNIQUE INDEX TEMP_T2_U1 ON TEMP_T2(OBJECT_ID);
Index created.
SQL>
SQL> CREATE OR REPLACE VIEW TEMP_T1T2_V AS
2 SELECT * FROM TEMP_T1 UNION ALL SELECT * FROM TEMP_T2;
View created.
SQL>
SQL> CREATE OR REPLACE TYPE TEMP_OBJ_TYPE AS OBJECT (OBJ_ID NUMBER)
2 /
Type created.
SQL> CREATE OR REPLACE TYPE TEMP_OBJ_TAB_TYPE IS TABLE OF TEMP_OBJ_TYPE
2 /
Type created.
SQL> SET SERVEROUTPUT ON;
SQL>
SQL> DECLARE
2 TYPE TEMP_T1T2_V_ROW_TAB_TYPE IS TABLE OF TEMP_T1T2_V%ROWTYPE;
3 TEMP_T1T2_V_ROW_TAB TEMP_T1T2_V_ROW_TAB_TYPE;
4 TEMP_OBJ_TAB TEMP_OBJ_TAB_TYPE := TEMP_OBJ_TAB_TYPE();
5 PROCEDURE ADD_TO_TEMP_OBJ_TAB(OBJ_ID IN NUMBER) IS
6 BEGIN
7 TEMP_OBJ_TAB.EXTEND;
8 TEMP_OBJ_TAB(TEMP_OBJ_TAB.LAST) := TEMP_OBJ_TYPE(OBJ_ID);
9 END;
10 BEGIN
11 ADD_TO_TEMP_OBJ_TAB(100);
12 ADD_TO_TEMP_OBJ_TAB(116);
13 ADD_TO_TEMP_OBJ_TAB(279);
14 ADD_TO_TEMP_OBJ_TAB(364);
15 DBMS_OUTPUT.PUT_LINE('=====================');
16 FOR I IN TEMP_OBJ_TAB.FIRST..TEMP_OBJ_TAB.LAST
17 LOOP
18 DBMS_OUTPUT.PUT_LINE('OBJ_ID = '||TEMP_OBJ_TAB(I).OBJ_ID);
19 END LOOP;
20 DBMS_OUTPUT.PUT_LINE('---------------------');
21 SELECT * BULK COLLECT INTO TEMP_T1T2_V_ROW_TAB
22 FROM TEMP_T1T2_V VW
23 WHERE ((VW.OBJECT_ID) IN (SELECT OBJ_ID
24 FROM TABLE(CAST(TEMP_OBJ_TAB AS TEMP_OBJ_TAB_TYPE))));
25 FOR I IN TEMP_OBJ_TAB.FIRST..TEMP_OBJ_TAB.LAST
26 LOOP
27 DBMS_OUTPUT.PUT_LINE('OBJ_ID = '||TEMP_OBJ_TAB(I).OBJ_ID);
28 END LOOP;
29 DBMS_OUTPUT.PUT_LINE('---------------------');
30 IF TEMP_T1T2_V_ROW_TAB.COUNT > 0 THEN
31 FOR I IN TEMP_T1T2_V_ROW_TAB.FIRST..TEMP_T1T2_V_ROW_TAB.LAST
32 LOOP
33 DBMS_OUTPUT.PUT_LINE(TEMP_T1T2_V_ROW_TAB(I).OBJECT_ID||' : '||TEMP_T1T2_V_ROW_TAB(I).OBJECT_NAME);
34 END LOOP;
35 ELSE
36 DBMS_OUTPUT.PUT_LINE('NO ROWS RETURNED!');
37 END IF;
38 DBMS_OUTPUT.PUT_LINE('---------------------');
39 END;
40 /
=====================
OBJ_ID = 100
OBJ_ID = 116
OBJ_ID = 279
OBJ_ID = 364
OBJ_ID = 100
OBJ_ID = 116
OBJ_ID = 279
OBJ_ID = 364
364 : I_AUDIT
364 : I_AUDIT
364 : I_AUDIT
364 : I_AUDIT
PL/SQL procedure successfully completed.
SQL> column object_name format a30
SQL> select object_id,
2          object_name
3    from dba_objects
4    where object_id in (100,116,279,364)
5 /
OBJECT_ID OBJECT_NAME
       100 ORA$BASE
       116 DUAL
       279 MAP_OBJECT
       364 I_AUDIT
SQL> Works fine in:
=====================
OBJ_ID = 100
OBJ_ID = 116
OBJ_ID = 279
OBJ_ID = 364
OBJ_ID = 100
OBJ_ID = 116
OBJ_ID = 279
OBJ_ID = 364
100 : ORA$BASE
116 : DUAL
364 : SYSTEM_PRIVILEGE_MAP
279 : MAP_OBJECT
PL/SQL procedure successfully completed.
SQL> select object_id,
2          object_name
3    from dba_objects
4    where object_id in (100,116,279,364)
5 /
OBJECT_ID OBJECT_NAME
      100 ORA$BASE
      116 DUAL
      364 SYSTEM_PRIVILEGE_MAP
      279 MAP_OBJECT
SQL> select *
2    from v$version
3 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0      Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>SY.
Edited by: Solomon Yakobson on Oct 30, 2012 2:14 PM

ORA13226 when using view with geometry created using sdo_util.simplify

I have a polygon table (and spatial index) using Ora11.1 that i can query such as:
Select ID From MyTable A where (MDSYS.SDO_RELATE(A.GEOMETRY, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARRAY(73.091805, 18.312310, 72.250051, 19.076872)), 'mask=INSIDE+COVEREDBY+EQUAL querytype=window') = 'TRUE');
This query returns 2 rows. I have created a view:
create or replace view v_MyTable as
select id, sdo_util.simplify(geometry,20,2) as s_geometry
from MyTable;
The subsequent query returns ORA13226
Select ID From v_MyTable A where (MDSYS.SDO_RELATE(A.S_GEOMETRY, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARRAY(73.091805, 18.312310, 72.250051, 19.076872)), 'mask=INSIDE+COVEREDBY+EQUAL querytype=window') = 'TRUE');
If I create a view which does not use the simplify function the query works.

tcbalent,
This is correct behaviour if you are trying the query the view:
Select ID
From V_MyTable A
where (MDSYS.SDO_RELATE(A.GEOMETRY, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARRAY(73.091805, 18.312310, 72.250051, 19.076872)), 'mask=INSIDE+COVEREDBY+EQUAL querytype=window') = 'TRUE');This is because the A.GEOMETRY is not the geometry in the original table (MyTable) but a programmatically
constructed geometry on the fly which is not indexed.
You can fix this with a function based index as follows (NOTE: This uses my own test data that is projected and not geodetic):
DROP table myTable;
create table myTable
as
select rownum as Id, geom as geometry
from projpoly2d
where polytype NOT IN ('COMPOUNDOUTERSHELL','VERTEXWITHARCNOHOLE');
delete from user_sdo_geom_metadata where table_name = 'MYTABLE' and column_name = 'GEOMETRY'; commit;
insert into user_sdo_geom_metadata(table_name, column_name,diminfo,srid)
select 'MYTABLE','GEOMETRY',diminfo,srid
from user_sdo_geom_metadata
where table_name = 'PROJPOLY2D'
   and column_name = 'GEOM';
commit;
create or replace view v_MyTable
as
select id, sdo_util.simplify(geometry,20,2) as S_geometry
from MyTable;
-- Create index metadata
delete from user_sdo_geom_metadata where table_name = 'MYTABLE' and column_name = 'MDSYS.SDO_UTIL.SIMPLIFY(GEOMETRY,20,2)'; commit;
insert into user_sdo_geom_metadata(table_name, column_name,diminfo,srid)
select 'MYTABLE','MDSYS.SDO_UTIL.SIMPLIFY(GEOMETRY,20,2)',diminfo,srid
from user_sdo_geom_metadata
where table_name = 'MYTABLE' and column_name = 'GEOMETRY';
commit;
select * from user_sdo_geom_metadata;
-- Now create index
drop   index MyTable_sgeometry_spdx;
create index MyTable_sgeometry_spdx on MyTable(MDSYS.SDO_UTIL.SIMPLIFY(GEOMETRY,20,2))
     indextype is mdsys.spatial_index parameters('sdo_indx_dims=2, layer_gtype=polygon');
Select ID
From v_MyTable A
where (MDSYS.SDO_RELATE(A.S_GEOMETRY,
                         MDSYS.SDO_GEOMETRY(2003, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3), MDSYS.SDO_ORDINATE_ARRAY(190000.0, 5120000.0, 640000.0, 5630000.0)),
                        'mask=INSIDE+COVEREDBY+EQUAL querytype=window') = 'TRUE');
-- Result
ID
5
1
4
2
6If this fixes your problem please mark this thread as answered.
regards
Simon

Discoverer 10g, it returns no data

Hi all,
I have a doubt can any one clarifies.
Currently I work migration projects from 4i to 10g discoverer reports (Upgraded 11i to R12). Previously in 4i discoverer reports many views used and data also populated. Same query in discoverer 10g, it returns no data. I can view the data after setting client org id in the toad but can’t view the data in the discoverer reports. Even I tried to register as a function for setting client org id and use in the discoverer reports but result is no rows return. Can any one suggest?
Regards,
Prasanna
no data

Hi,
Check Metalink Note 732826.1. There are some extra steps need to configure R12 with Discoverer.
Rod West

Report returns wrong data when run on server

Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
Kim

Hi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair

How can forbid changing data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~

you have to find out what the user did before your program goes ahead and starts the BAPI.

How can forbid changging data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~
Edited by: lorryhappy on Dec 22, 2009 11:35 AM

Hi
You can achieve it in another way..
Before Passing Data to BAPI , Check whether the material is existing or not..
If material is existing (Present in Material Master Tables e.g. MARA ) using
data: l_matnr like mara-matnr.
Select single matnr from mara into l_matnr.
IF sy-subrc EQ 0.
" Material is existing ==> Do Not Pass to BAPI
else.
" Material is NOT existing ==> Pass to BAPI for creation.
endif.
Repeat above logic for every material in batch..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Does verizon selects collect data when using wifi ?

When signing up for verizon selects is states it collects data when using wireless service but does it collect data when using home wifi which is not verizon?

I'm not sure why one would want to participate in this program but if one is weary about it I for sure wouldn't use it.

Best practice when using Tangosol with an app server

Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/Per

Hi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per

Display "blank-out" when using Maya with a GF 7800?

I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?

OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce.

Only 274 mails are coming when using pop3 with java mail

Only 274 mails are coming from GMAIL when using pop3 with java mail. but there are more than 3000 mails.
I'm not getting the reason, code is given below:
public static void main(String[] args) {
        // SUBSTITUTE YOUR ISP's POP3 SERVER HERE!!!
//        String host = "pop.bizmail.yahoo.com";
//        final String user = "[email protected]";
//        final String password = "xxx";
        String host = "pop.gmail.com";
        final String user = "gauravjlj";
        final String password = "xxx";
        String subjectSubstringToSearch = "Test E-Mail through Java";
        try {
             Properties prop = new Properties();
            prop.setProperty("mail.pop3.socketFactory.class",
                                        "javax.net.ssl.SSLSocketFactory");
            prop.setProperty("mail.pop3.socketFactory.fallback", "false");
            prop.setProperty("mail.pop3.port", "995");
            prop.setProperty("mail.pop3.socketFactory.port", "995");
            prop.put("mail.pop3.host", host);
            prop.put("mail.store.protocol", "pop3");
            Session session = Session.getDefaultInstance(prop);
            Store store = session.getStore();
            System.out.println("your ID is : "+ user);
            System.out.println("Connecting...");
            store.connect(host, user, password);
            System.out.println("Connected...");
            // Get "INBOX"
            Folder fldr = store.getFolder("INBOX");
            fldr.open(Folder.READ_ONLY);
            int count = fldr.getMessageCount();
            System.out.println(count + " total messages");
            // Message numebers start at 1
            for(int i = 1; i <= count; i++) {
                                        // Get a message by its sequence number
                Message m = fldr.getMessage(i);
                // Get some headers
                Date date = m.getSentDate();
                Address [] from = m.getFrom();
                String subj = m.getSubject();
                String mimeType = m.getContentType();
                System.out.println(date + "\t" + from[0] + "\t" +
                                    subj + "\t" + mimeType);
            // Search for e-mails by some subject substring
            String pattern = subjectSubstringToSearch;
            SubjectTerm st = new SubjectTerm(pattern);
            // Get some message references
            Message [] found = fldr.search(st);
            System.out.println(found.length +
                                " messages matched Subject pattern \"" +
                                pattern + "\"");
            for (int i = 0; i < found.length; i++) {
                Message m = found;
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
Object o = m.getContent();
if (o instanceof String) {
System.out.println("**This is a String Message**");
System.out.println((String)o);
else if (o instanceof Multipart) {
System.out.print("**This is a Multipart Message. ");
Multipart mp = (Multipart)o;
int count3 = mp.getCount();
System.out.println("It has " + count3 +
" BodyParts in it**");
for (int j = 0; j < count3; j++) {
// Part are numbered starting at 0
BodyPart b = mp.getBodyPart(j);
String mimeType2 = b.getContentType();
System.out.println( "BodyPart " + (j + 1) +
" is of MimeType " + mimeType);
Object o2 = b.getContent();
if (o2 instanceof String) {
System.out.println("**This is a String BodyPart**");
System.out.println((String)o2);
else if (o2 instanceof Multipart) {
System.out.print(
"**This BodyPart is a nested Multipart. ");
Multipart mp2 = (Multipart)o2;
int count2 = mp2.getCount();
System.out.println("It has " + count2 +
"further BodyParts in it**");
else if (o2 instanceof InputStream) {
System.out.println(
"**This is an InputStream BodyPart**");
} //End of for
else if (o instanceof InputStream) {
System.out.println("**This is an InputStream message**");
InputStream is = (InputStream)o;
// Assumes character content (not binary images)
int c;
while ((c = is.read()) != -1) {
System.out.write(c);
// Uncomment to set "delete" flag on the message
//m.setFlag(Flags.Flag.DELETED,true);
} //End of for
// "true" actually deletes flagged messages from folder
fldr.close(true);
store.close();
catch (MessagingException mex) {
// Prints all nested (chained) exceptions as well
mex.printStackTrace();
catch (IOException ioex) {
ioex.printStackTrace();
Please tell me.
Thanks

Is it possible that GMail only allows access to untagged emails via POP3? Or only to emails from the last x days?
POP3 is the older email retrieval protocol (IMAP4 is the more current one) and only has very limited support for folders (or anything but a single inbox, really). It's quite common that POP3 only allows access to a subset of all emails stored by a provider.

How to store a layout, when using CL_SALV_TREE with a container?

Hello,
I'd like to use an object of type CL_SALV_TREE, that is placed on a custom container (and therefore not displayed in fullscreen).
But how do I get the functionality to store a layout, when using CL_SALV_TREE not in fullscreen mode? If you use it in fullscreen mode, you just have to define the function code in your gui status and everything is ok.
But since I want to place my CL_SALV_TREE on a custom container, that method does not work. If I call <my_salv_tree>->get_functions( ) it returns a table, that holds just six entries. So, the appropiate function for storing a layout does not seem to be in the default set of functions, when using CL_SALV_TREE with a custom container. But how do I activate this function?
I already call the functions get_layout() and set_key() - so that shouldn't be the problem. Or is just not possible to use CL_SALV_TREE on a custom container and have the possibility to store layouts?
Kind regards, Lars

Hello,
I'd like to use an object of type CL_SALV_TREE, that is placed on a custom container (and therefore not displayed in fullscreen).
But how do I get the functionality to store a layout, when using CL_SALV_TREE not in fullscreen mode? If you use it in fullscreen mode, you just have to define the function code in your gui status and everything is ok.
But since I want to place my CL_SALV_TREE on a custom container, that method does not work. If I call <my_salv_tree>->get_functions( ) it returns a table, that holds just six entries. So, the appropiate function for storing a layout does not seem to be in the default set of functions, when using CL_SALV_TREE with a custom container. But how do I activate this function?
I already call the functions get_layout() and set_key() - so that shouldn't be the problem. Or is just not possible to use CL_SALV_TREE on a custom container and have the possibility to store layouts?
Kind regards, Lars

When using iPhone with Ford automobiles' Sync, the connection drops each time the ignition is shut off. In order to restore, the bluetooth must be turned off on the iphone, then restarted. Any suggestions?

When using iPhone with Ford Automobiles' SYNC, the connection drops each time the ignition is shut off. To restore, you must turn off the bluetooth on iPhone, then restart each time. Any suggestions?

There is an update avaialbe for Ford systems to correct bluetooth problems. You need to update your system.

When using Numbers with iCloud, a new version of the spreadsheet is created even when no reisions have been made. Why is this, and how do I make it stop?

When using Numbers with iCloud, a new version is created every time I make a change. I do not want all these revised documents. When I change a document, I commit to that change. How do I shut off this multiple-revision feature of Numbers being pushed to iCloud.
Also....
When using Numbers with iCloud, a new version of the spreadsheet is created even when no revisions have been made. Why is this, and how do I make it stop?
My files are growing.

Your plugins list shows outdated plugin(s) with known security and stability risks.
# Java Plug-in 1.5.0_11 for Netscape Navigator (DLL Helper)
# Adobe Shockwave for Director Netscape plug-in, version 11.0
Update the [[Java]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
See
http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
http://www.adobe.com/shockwave/welcome/

Discoverer 4i Plus returns no data when using views with db link references

Similar Messages

Maybe you are looking for