Doc Splitting in case of Asset Acquisition
Hi Gurus,
Since I've activated document splitting, Now When I try to save Asset Acquisition document system shows me following error:
"Balancing field "Profit Center" in line item 001 not filled"
The field Profit Center marked as balancing is not filled with any value, even after doc splitting'
Pls help.
Regards,
Vikas Malhotra
Hi,
setup your configuration that way that a profit center can be derived from the posting logic. Note 684659 should help here.
Regards,
Markus
Similar Messages
-
Document Splitting problem while posting asset acquisition using F-90
Hi,
We are using ECC 6.0 with document splitting functionality and are facing problem while posting asset acquisition using F-90.
The transaction entry details are as below:
Document Type - KR
Vendor Line Item PKey - 31
Amount - 10000
Asset Line Item with PKey - 70, Transaction Type - 100
Amount - 10000
The Document Splitting Rule - 0000000012 is used and the Field Status Group for the Vendor Reconciliation Account and Asset Reconciliation account have Cost Center, Profit Center and Segment as "Optional" field.
The Balance Sheet Item - Asset Reconciliation Account has been created as
Secondary Cost Element - 90.
The Profit Center and Segment field have been made mandatory and zero balancing is also set in the settings for Document Splitting.
While posting asset acquisition using F-90, we are getting the error message - "Balancing Field "Profit Center" in line item 001 not filled"
The first line refers to the Vendor Line item.
Please let me know how to overcome this error.
Regards,
RamanandPlease follow the below path and do config :-
IMG>FA>Asset Accounting>Integration with the General Ledger>Additional Account Assignment Objects>Specify Account Assignment Types for Account Assignment Objects
here you have to put KOSTL (Cost center) for both against APC and Dep run for each Dep area.
Thanks
Pyare -
Doc splitting and new Gl a/c
Hi All,
can any one tell me the difference between doc splitting and new gl concept. and explain me how will it useful in preparing profit center wise balance sheet.
and pls explain me the configuration steps.
Thanks In advance
SarayuHi
Document splitting enables a complex display of documents. Line items are split here for selected dimensions. This ensures that you can draw up complete financial statements for the selected dimensions at any time. Below example would further clear :-
Suppose a vendor invoice containing the following items is entered:
Posting Key Account Segment Amount
31 Payable 100.00-
40 Expense 0001 40.00
40 Expense 0002 60.00
Document splitting then creates the following document in the general ledger view:
Posting Key Account Segment Amount
31 Payable 0001 40.00-
31 Payable 0002 60.00-
40 Expense 0001 40.00
40 Expense 0002 60.00
Settings for Splitting are as follows :-
In the IMG, choose Financial Accounting (New)->General Ledger Accounting (New)-> Business Transactions-> Document Splitting.
1. Classify G/L Accounts for Document Splitting - You need to classify the individual document items so that the system knows how to handle them. You do this by assigning them to an item category. The item category is determined by the account number. In this IMG activity, you need to assign the appropriate accounts.
2. Classify Document Types for Document Splitting - Every business transaction that is entered is analyzed during the document splitting process. In this process, the system determines which splitting rule is applied to the document. To enable the system to determine the splitting rule, you need to assign a business transaction variant to each document type.
3. Define Zero-Balance Clearing Account - Here you define a clearing account for account assignment objects for which you want to have a zero balance setting when the balance is not zero.
4. Define Document Splitting Characteristics for General Ledger Accounting - Here you specify to which document splitting characteristics document splitting applies, for example, profit center or segment. The characteristics that you specify should be maintained in at least one of your ledgers. You determine which characteristics are maintained in your ledger by assigning scenarios or customer fields to your ledgers.
You also define how this characteristic is to be handled by specifying, for example, whether you want to apply a zero balance setting, whether the field is a required entry field, and the appropriate partner field.
5. Define Document Splitting Characteristics for Controlling - Here you specify which additional characteristics you want to apply in document splitting. The additional characteristics are not relevant for General Ledger Accounting. Instead, they are relevant for components in Controlling that use documents transferred from General Ledger Accounting.
6. Define Post-Capitalization of Cash Discount to Assets - Here you define whether the cash discount that is applied in the payment of an asset-relevant invoice should be capitalized to the asset. When you select this setting, the cash discount amount is not posted to the cash discount account in the payment document, but instead directly to the asset.
7. Edit Constants for Nonassigned Processes - Here you define default account assignments (for example, a default segment) for specific line items in processes for which it is not possible to derive the correct account assignments at the time when the document is posted. This is the case if the required information is not yet available when the posting occurs.
8. Activate Document Splitting - In this IMG activity, you activate document splitting. The splitting method used is that delivered by SAP as standard, which contains the splitting rules for the different business transactions. If this splitting method does not meet your requirements, you can first define and then select your own method in Customizing for document splitting (see the next step).
Settings for Extended Document Splitting
Here you define your own rules for document splitting and make the necessary settings so that the system applies the rules you defined and not the SAP standard rules.
9. Define Splitting Method - Here you define your own method for document splitting. A splitting method contains the rules governing how the individual item categories are dealt with.
10. Define Splitting Rule - Here you define the splitting rules for document splitting. You assign one or more business transaction variants, the account key for the zero balance setting, and the leading item categories for cross-company code transactions to a splitting method.
11. Assign Splitting Method - Here you assign the splitting method to be used for document splitting after activation. If you want to activate your own splitting method, replace the standard method with your own method.
12. Define Business Transaction Variants - Here you can define business transaction variants for the business transactions in document splitting.
Regards,
R.Ramakrishnaraj -
Dear
FI/CO PROFESSIONALS
In External Asset Acquisitions, we have Different methods to post purchase order like with FI-AP/FI-MM ,with integration ,with non intigraton
KINDLY EXPLAIN ME whats these methods really? what is integration/non integration in this scenario , in which criteria we use these methods ?
We use Fi with vendor directly to save time but iam confusing with other methods plz
explain me ...
thanks regards
rajuHi NagaRaju,
An external asset acquisition is a business transaction resulting from the acquisition of an asset from a business partner (in contrast to an acquisition from in-house production). You can post the acquisition of a purchased asset in several different ways, using different components of the R/3 System:
In Asset Accounting (FI-AA) in integration with Accounts Payable (FI-AP), but without reference to a purchase order:
(ii)In Asset Accounting, without reference to a purchase order, without integration with Accounts Payable (posting to a clearing account - with or without clearing).
(iii) In Materials Management (MM) at goods receipt or invoice receipt (refer to Processing Asset Acquisitions in Purchasing (FI-AA/MM) and Goods Receipt and Invoice Receipt with Reference to Asset).
Process Flow:Integrated Asset Acquisition Posting
If you are also using SAP R/3 Accounts Payable (FI-AP), it is recommended that you take advantage of this integration and post the asset acquisition (without reference to a purchase order) With vendor. This means that you can post the asset acquisition and the corresponding vendor payable in one transaction. Using this transaction reduces the time and energy required for data entry and the possibility of discrepancies.
Non-Integrated Asset Acquisition Posting:You can post the acquisition of a purchased asset to a clearing account rather than using integrated posting to Accounts Payable. There are two scenarios:
The asset acquisition comes before the receipt of the invoice. The offsetting entry is posted automatically. As the acquisition amount, specify the actual net amount to be capitalized. Regardless of the document type (gross/net) which you use, the system does not deduct a discount here.
The asset acquisition is posted after the receipt of the invoice. You posted the invoice as an open item to a clearing account, and now you need to clear this entry. If the clearing account used is an open item account, when you post the acquisition, you can manually clear the posting to the clearing account (vendor invoice) at the same time (transfer with clearing). The corresponding transaction allows you to select all open items, per clearing account (account type S for General Ledger account) according to varying criteria.
Cash Discount:When posting an asset acquisition integrated with Accounts Payable, your choice of document type determines whether you post gross (without cash discount deducted) or net (with cash discount deducted).
When you use a document type for net posting, the system determines the cash discount deduction automatically by means of the specified terms of payment, and capitalizes the invoice amount on the fixed asset, minus sales tax and cash discount.
During the payment run, differences may arise between the amount paid and the capitalization amount, because too little or too much cash discount was deducted. In this case, make adjustments to the APC using collective processing in the General Ledger (General Ledger->Periodic processing->Closing->Regroup-> Prof.segment adjstmt).
When you post an asset acquisition without integration with Accounts Payable, you have to capitalize the actual APC amount (without cash discount being deducted) to the asset. In this case, the cash discount is treated only on the vendor side.
Acquisition with Value Adjustments:You can post gross acquisitions, if you want to post assets that not only have APC, but also have value adjustments already. In order to use this option, set the gross acquisition indicator in the transaction type you use. The system then permits you to enter APC and accompanying value adjustments when you post the acquisition using the transaction under Postings ->Miscellaneous.
Hope I had been able to help you. Pleaae assign points.
Rgds
Manish -
New GL - Doc Splitting - Profit Center not hitting the Zero Balance GL
Dear SAP New GL Gurus,
I am trying to activate the doc splitting where the system uses a GL Account to ensure that Profit Center wise Trial Balances are tallied.
I have done the following configuration till now, and I feel that these steps should ideally split the doc and post the PCA Adjustment Account Entry - I think its the Zero Balance Clearing account that the system should ideally be using.
I am not sure what I am missing here - This is what is done till now:
1. Activated Document Splitting - Used Standard Method 0000000012.
2. Classified GL Accounts for Doc Splitting as per standard SAP categories.
3. Classify Doc Types with assignments of Transaction and Variant. Done as per standard, no changes made.
4. Defined Zero Balance Clearing Account.
5. Define Document Splitting Characteristics for General Ledger Accounting - Made Profit Center field as Mandatory
6. Define Document Splitting Characteristics for Controlling - Left it BLANK as Point No. 5 is done for GL Accounting.
7. Define Post-Capitalization of Cash Discount to Assets - Ignored
8. Edit Constants for Nonassigned Processes - Ignored
Under Real-Time Integration of Controlling with Financial Accounting:
1. Standard variant 0001 used.
2. Assigned 0001 variant on the Co Code.
3. Define Rules for Selecting CO Line Items - Ignored
4. Define Account Determination for Real-Time Integration - Ignored
Accouting Entry posted by me - Both lines are Balance Sheet items:
DR Bank GL Profit Center X
CR Bank GL Profit Center Y
Please help me out here.
I will assign full points.
Many Thanks
BobHi,
Yes. Very much. you need to assign scenarios even if you are using leading ledger.
In any enty there will be minimum two views, Entry view and Ledger View
Ex.
Entry view
Account Amt A/c Assig objects - Profit Center
Customer 400
Sale A/c -400 2000
Gl View
Account Amt A/c Assig objects - Profit Center
Customer Recon A/c 400
Sale A/c -400 2000
If you dont assign Profit center in the scenario to the leading ledger, in gl view you will not be able to see profit center against the sales line item
Assign points if useful
Regards
Raghu Ram -
DOC Splitting in New GL and Profit center accounting activation
Dear All,
I am in a dilemma regarding the following -
We are activating doc splitting with profit center and segment as characteristics.
1) While maintaining Controlling area settings(OKKP) - do we need to activate "Profit Center Accounting" component?
2) Similarly, in IMG-Controlling - Profit Center Accounting- Basic Settings-Controlling Area Settings-Maintain Controlling Area Settings (0ke5), do we need to maintain any settings?
I am of the opinion that ,based on the SAP Note - 826357, that we need not activate PC accounting as it is built into New GL Accounting.
I am also of the opinion, again based on the note, that we can use classic PC accounting, but the note recommends and I quote
we do not recommend you do this on a long-term basis due to the increased data volume and the increased time and effort required, and in the case of active document splitting, the update response changes.
But I am not able to come to a conclusion.
In earlier implementations, I activated PC accounting in OKK5 in New GL doc split scenario. So keeping that in mind, pl guide me.
Thanks & regards,
GovHi
Please set the Profit Center Accounting with Controlling Area.
SPRO->CONTROLLING-->PROFIT CENTER ACCOUNTING -->CONTROLLING AREA SETTING -->MAINTAIN CONTROLLING AREA -
Basic idoc type for asset creatioon and asset acquisition
Hi
Please can anybody tell me the basic IDOC type provided by SAP for
- Asset creation
- Asset acquisition.
Thanx in advance....Hi,
Go through this link
http://www.sap-basis-abap.com/fico/configuration-in-asset-accounting.htm
help.sap.com/bestpractices/BBLibrary/documentation/B44_BB_ConfigGuide_EN_Nordics.doc
Reward points if found helpful...
Cheers,
Chandra Sekhar. -
Profit Center Derivation for Asset Acquisition
Hello all,
I am trying to post asset acquisition via F-90.
We are using ECC6.0 and document split is activated.
I assumed that system will derive the profit center from the assigned cost center in the asset master record.
However, system returned error " Balancing field "Profit Center" in line item 001 not filled ".\
Is there something missing? Am I supposed to create some new transaction variant in document split OR define some rule to derive the profit center of the asset master record from the cost center?
Hope you are able to provide you insights.
Thank you,
RichardHello Richard,
I I think The problem is caused by missing customizing in trx. ACSET. the profit center can not be directly assigned to assets in asset master data. Therefore it has to be derived from cost center that is linked to asset.
To derive the cost center on FI document and then onto NewGL, it is necessary to:
1) set cost center field 'optional' in field status (trx. OB14 & OB41)
2) set cost center as account assignment at trx. ACSET
Best Regards,
Gladys xing -
Fixed asset acquisition report by month?
Hi,
We're using the fixed asset acquisition report thru tcode 'S_ALR_87012050 '.
but there is only the report date input with the last day of the fiscal year concerned.
Is there any standard report to see acquisition amount with month-end or specific date?
Thanks for your help.Chris,
I have just one more suggestion. Even though you have to use a yearend Report date for a closed prior-year, you could define a range in the Posting date selection criteria. In other words, if you would like to see the acquisitions for a given month or range of months in a closed prior-year, then give a 12/31/PY for the Report date and a specified date range in the Posting date selection criteria.
Hope this helps.
Thanks,
Chad
Edited by: Chad Busbee on Feb 8, 2008 2:56 PM -
Billing doc splitting to different cocodes
hi gurus,
my client needs billing doc splitting to different cocodes with different revenue G/L accounts with common customer. He needs from billing doc flow ?how can we solve this? any inputs on invoice splitting highly appreciated.
thanks in advance.
regds,
ramHi,
I am facing a similar issue. Please let me know a s how you proceeded in clearing the "SPLIT DUE TO PARTNER DATA".
Thanks in Advance.
Regards,
Rajesh -
Billing doc Split due to different partner data in VOFM
I have a Billing doc split due to different partner data in a routine in VOFM. How do you clear these. I have tried VBPA without success. We want a billing document by Payer and PO number.
Hi,
I am facing a similar issue. Please let me know a s how you proceeded in clearing the "SPLIT DUE TO PARTNER DATA".
Thanks in Advance.
Regards,
Rajesh -
Error while doing asset acquisition
Hi Friends
I am tryin to post an asset acquisition but gettin the following error-
Contact your system administrator (table error)
Message no. AA824
Diagnosis
No accounts have been entered for depreciation area 01 for account allocation 11000 (chart of accounts CAIN).
Procedure
Maintain the accounts for depreciation area 01.
I have done the Account determination for Dep Area 01.
Am i missing something here? Help would be greatly appreciated.Hello Vishal
Use report RACKONTO to have an extended log of eventual inconsistencies in any of your account determinations. Make sure the log is error free for all the account determinations.
Regards
Javier Reviriego -
Error while posting asset acquisition
hai
while posting asset acquisition in f-90 iam getting error that "asset is incomplete' when analysed using RAUNVA00 , it is asking to update field group-22 i.e scrap value, but this field is not found in asset master, pls help me.
thank u
shivaji.aIn AS02 you go the Depreciation key and double click on the depreciation key. In the following screen "additional Specifications" you give Scrap value.
-
Asset Acquisition Error: Global Company is not supported
Dear All
i am trying to post and asset acquisition through F-90 when i try to save the document i am getting the
following message
Global company XXXXX is not supported
Message no. GI102
Diagnosis
The direct posting function could not find the global company specified. The global company has either been entered in the document or read from table T001 based on the transferred company code. Each global company must be defined in table T880.
System Response
Direct posting to General Ledger cannot take place.
Procedure
Check the document as well as tables T001 and T880.
Please tell me how to rectify this problem
Regards
BilalHi Have a look to SE16 if the values are in both tables are the same.
In SM30 you can fill in the table name and click on the button Customizing to found where you have to change the settings
Paul -
Capital Cenvat iisue in case of asset transfer
Hi SAP GURUS,
I am purchasing asset on which I am claiming the capital cenvat credit. Which is 50% in first year & 50 % in second year. But after 3 months I am transferring this asset to a different excisable plant of my company. How can i transfer the cenvat credit with this.
Thanks
CheersM adding up in above.......
in J1id , select Material and Chapter ID Combination , give material type assets. Based on Material type, system calculates Cenvat and treat like that. U dont need to do much difeerent anyth in the case of assets.
Also cross check that u have ticked Immediate credit on capital goods in Company code settings.
Before posting any excise invoice it is advisable to see the simulation of excise invoice for correct posting of u201CCenvat on holdu201D and u201CCenvat availu201D part.
thanks
Maybe you are looking for
-
Restart Macbook Air Error Message
Each time I try to force a restart of my Macbook Air, I get an error: Application Main cancels restart. I cannot get around this message to force a reboot. Please help...
-
This are my system requirements: Samsung NP550 Windows 8.1 Single Language intel core i7 2.40 ghz 8gb ram 64bit 750 Gb hard disc
-
Hi, Many of the job requirement are asking for Oracle RAC experience on SAP. Does any one have experience on that. If so please share their experience. Few years back I attended course on SAP Basis and as I remember most of the DBA tasks will be done
-
IMG 1.9 set-up screen shows up EVERY time I turn on my television
Hello, I live in NJ and received the IMG 1.9 update a few days ago. Every time I turn on my TV, I get the set-up screen asking me to choose my television type (standard or HDTV). For some reason, the box isn't "holding" my choice. I tried rebooting,
-
Mac book pro update - blank screen - still going or not?
Hi, I (extremely stupidly) set my Mac book pro to go ahead with about 4GB worth of system updates without backing up the machine first. It's about 1.5 hrs in, the screen has been black for the entire time but the fans are still going. I'm not sure wh