Error message while transporting SapScript to productive system

Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
R3TRFORMZMEDRUCKN was repaired in this system
Message no. TW 104
Diagnosis
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
System Response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
Cheers

Hi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod

Similar Messages

Error message while transporting the HR role

All
I was trying to move my HR role from Dev to QA.
I got the error message from transport and not sure about it.
Please let me know if you have any suggestions.
Invalid organizational level $ORGEH deleted from role Z_ALL_MODULES_EXCEPT_BASIS_HR
Invalid organizational level $ORGUNIT deleted from role Z_ALL_MODULES_EXCEPT_BASIS_HR
Errors occurred during post-handling
PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Post-import method PRGN_AFTER_IMP_ACTGROUP_ACGR completed for ACGR L, date and time: 20071011162942

Pranav,
You can see a list of all org levels in table USORG
There are standard SAP programs for adding or deleting org levels
PFCG_ORGFIELD_CREATE
PFCG_ORGFIELD_DELETE
If you want these fields to be maintained as org levels then you need to make sure that you have created them in all system.
If you don't want these fields as org levels then you can delete them using the program I listed above.

Error while transporting ADDRESS to production system

Hi all,
We are in the process of a new rollout and we have created new plants and company codes. the same have been transported to quality and pre-production systems without any issues. however when we transport the same to Production, we face an error
The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
The object
R3TR TDAT ADDRESS_4.6*
has not yet been imported into client 100 without error.
the objects are getting transported with same address number as in development which in production points to a different address.
as far as i know the system should generate a new address number and assign it to the object during transport.
Any suggestion wud be great

the log is
 Post-import methods for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Post-import method AFTER_IMP_CUST_ADDRESS started for ADDRESS_4.6 T, date and time: 20090714144548
 Post-processing taking place in client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 Post-import method AFTER_IMP_CUST_ADDRESS completed for ADDRESS_4.6 T, date and time: 20090714144548
 Post-import methods of change/transport request MEDK909182 completed
 Start of subsequent processing ... 20090714144547
 End of subsequent processing... 20090714144548
 Execute reports for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Reports for change/transport request MEDK909182 have been executed
 Start of................ 20090714144548
 End of.................. 20090714144548
 Execution of programs after import (XPRA)
 End date and time : 20090714144548
 Ended with return code: ===> 8 <===
regards,
Tarun
Edited by: Tarun Bahal on Jul 16, 2009 9:41 PM

System error message while using maps check in

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

Price error message while creating production order- Urgent

In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
Thanks

Please confirm where i should check for Activity price?
But then why we are able to get error message.
Reexplain:
Creating a production order which do not have standard cost in material master.
While saving, getting a error message'No price could be determined.......'
Now changing the message to Warning through configuration using TC: OPR4_PPCO
Now again creating the production order and saving
Expectation to have same message as warning but not getting anything.
Thanks
Edited by: vineet garg on May 1, 2008 12:14 AM

PROJECT SYSTEM :No error message while doing TECO(TECHNICALLY COMPLETED)

When we do technically completed for an activity in PROJECT SYSTEM ,system should give an error message if there are any production order for which materials are yet to be received. Can any one tell me how to do it.

Hi,
I don't think standard SAP supports what you want to achieve.
Regards,
Paul

How we can monitor while import request in production system?

dear friends,
will you please explain me
how we can monitor while import request in production system?
and
what are the things we have to monitor during the transport?
thanks
regards
zaheer

Hello Zaheer ,
I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
Check with
tp -v
R3trans -v
if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
During the import, it is important to check the contents of the directories
usr/sap/trans/tmp
and
usr/sap/trans/log
that they are being continously updated which shows import is progressing.
Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
Best regards,
Paul

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

Error message while activating ODS ZFI_ORD( FI Order Details)

hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
Pooja

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Error message while starting database

Hi all,
I am getting the following error message while starting the database . I just modified the DB_CACHE_SIZE parameter from 781MB to 781(+500MB) .We are using Oracle 9.2.0.1 in Windows server 2003 . The database starts fine with old parameter value.I searched in Metalink and in Google but no exact solution for this error . Can any body of you help me in this regard.. It is urgent....
C:\Documents and Settings\mishelpdesk.MISSERVER>d:
D:\>set oracle_sid=MISAPP1
D:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Thu Jun 15 06:32:31 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> startup pfile='D:\oracle\admin\MISAPP1\pfile\init.ora';
ORA-27102: out of memory
OSD-00022: Message 22 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 8) Not enough storage is available to process this command.
Thanks in Advance...
Govind.

Your problem is an OS, not Oracle problem, so it wouldn't help to play around with different init.ora parameters, as long as the basic problem persists. The note addresses W2K, you are on W2003, that may the reason for the different OSD error numbers.
For more information about AWE see on metalink
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Note:225349.1
Werner

Error message while while upgrading FIM RTM to FIM Service pack 1

Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban Singha

HI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine

ERROR Message while creating Rebate condition record T code VBO1

Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
siva

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Error message while transporting SapScript to productive system

Similar Messages

Maybe you are looking for