Error when processing asset under construction (AuC) for WBS element message no cj824

Hi,
i am getting error message when i change dates in activities.
Error when processing asset under construction (AuC) for WBS element
Message no. CJ 824
i have checked related post but did not find any solution. also check SAP Note but not related to my issue.
Please guide.
thanks
Sunil

Hi Ken,
Please check below screens:
according to this error message AUC has some missing field or some incorrect value. but when i checked via program RAUNVA00 which will display
Incomplete Assets - Detail List.
but this program does not return any incompleteness.
i found many threads and SAP Not but none of is related to my program. this problem comes when i change dates in activity and save the project.
Please suggest what to do now.
thanks
Sunil

Similar Messages

  • Asset Under Construction(AUC),During month end settlement run(via KO8G)

    Hi Guys ,
    please hlep on this AUC :
    During month end settlement run (via tcode KO8G), if there are -ve (credit) values to be settled to an Asset Under Construction (AUC) asset which does not have sufficient +ve value in the current FY, the settlement run will prompt an error message "Balance for transaction type group 10 negative for the area 01". The TT posted via the settlement run is TT115. To get around, user has to raise a manual journal (via doc type AT) to post the -ve value to the same AUC asset via TT101. TT 115 and 101 are configured differently (see attached).
    Since the Fixed Assets system does accept credit posting to AUC via a journal, is there a solution to make posting go through via the settlement run?
    Regards,
    Narra

    You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
    Give the asset value date as 15.07.2007 in KO88
    Hope this will work
    Radha

  • ASSET UNDER CONSTRUCTION (AUC)

    Hi,
    I've created an asset, booked an entry through F-90 & defines the distribution rule against category FXA & put %age is 100% but finally when I go for settlement I'm getting following error:-
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '       400.000,00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application
    Please help.
    Regards,
    Vikas
    [email protected]

    vikas
    check you settings in FS00 in control data regarding account currency? balance in local currency?
    assign the point if helpful

  • Assets under construction (AUC) revaluation

    hello, I've a question. I need to manually post revaluation to an AuC (as investment meassure), with tx ABAW a ttype 993, this goes to reavaluation area 03 (not principal area 01). I can see the correct values on the AuC but when I do CJ88 as "global settlement" so the values of the AuC goes to the final assets, the revaluation "stays" in the AuC ... the ttype fot that is the standar 336 it's not limited to any area, furthermore I also try explicit posting to all areas, but the problem persists.
    Any Idea ? If I do the automatic calculation of revaluation through J1AI with a reval key in the AuC, when I do the CJ88 to final asset, should it work ? Or I need to make same change in PS or AA so that it takes values from every area ?.
    Thanks !!!

    Thanks for this suggestion; I must have felt your brainwaves coming my wayI had only just posted this thread and logged off and I did do exactly as you suggestI checked on a finished project's AUC that WASN'T appearing on this list with a zero value.  This is because its AUC had a "deactivation date" on the AUC itself.  The outstanding zero-balance AUCs do NOT have a deactivation date.  I am in process of examining two methods of correcting this to determine which one is easier/better and works most efficiently.  I'll post the results when I have figured the correct method out.

  • Asset Under Construction (AuC) Issue .....

    Hi,
    I am facing one problem in AuC Settlement. For Settlement we created one allocation structure under that i have seleted FXA as receiver category , here system is asking External Settlement Account. I know that External Settlement Account means GL Account, my doubt what exact GL account i have to convert here.
    Sateesh

    The gl account should be the fixed asset account, to which it should be going when capitalized or some expense account if expensed out.

  • Settlement of Internal order to Asset under construction (AUC)

    Hi,
    To All
    While settling an internal order to AUC through KO88 it shows already settled whereas the balance of the internal remains the same and while settling AUC the error shows "there is no line item".
    What can be the problem, why internal order is not settling to AUC?
    Has anybody face this issue before? I have spent hell of the time on this issue but haven't resolved this. I would greatly appreciate your response on this.
    Thanks
    Jainendra

    Hi Jainendra,
    Please refer OSS Notes# 310116 (Settlement AuC: Open items not correctly cleared )
    OSS Notes# 412869   (AuC settlement: AW521 or line item not settled )
    Have a look into the below link,
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/71daf9448011d189f00000e81ddfac/frameset.htm
    Also refer the below SDN link:
    Re: Capitalization of Asset
    Hope this helps.
    Please assign points as a way to say thanks
    Message was edited by: Ravi Rana

  • Error in dep run - Asset under construction

    Hi!
    Could someone please help me with the following:
    My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
    1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
    2) Executed depreciation in background.
    3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
    4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
    5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
    6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
    Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
    Please help!
    I am very thankful for any help!
    Many many thanks in advance!
    with regards,
    Prabhakar

    Hi,
    I had the similar situation couple of months back.  I followed below mentioned process and it worked out well.
    1) Maintain GL account for depreciation in AO90
    2) restart depreciation run for the relevant period
    3) change the depreciation key to 0000
    4) repeat depreciation run for the same period (It will post a reverse entry in the same month itself.  So the net impact of depreciation in the same month is zero).
    By the way I have a suggestion to prevent this issue in future.
    You may not be able to detect this issue on test run if you execute on foreground mode because the test run execution is restricted to 1000 assets.  If the error is on 1001th asset, you will not know. 
    Hence, always execute depreciation test run on background mode, check for any errors and execute production run only if there are no errors.
    Hope this helps....
    Best Regards,
    Madhu

  • Error in depreciation run - assets under construction

    Hi!
    Could someone please help me with the following:
    My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
    1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
    2) Executed depreciation in background.
    3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
    4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
    5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
    6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
    Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
    Please help!
    I am very thankful for any help!
    Many many thanks in advance!

    Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
    with regards,
    Prabhakar

  • Steps for completing Asset under Construction

    hi,
    i have created the AUC  asset class  with line settlement checked.
    will somebody be kind enough to show me the futher steps involved in customization along with postings and settlement procedure....
    regards
    sayeed

    Hi,
    You can manage the asset under construction in the system in two different ways, depending on the types of functions that you need. The asset under construction can be either a normal asset record, or a master record with line item management. As a result, the transfer from the asset under construction to completed fixed assets can be handled in one of two ways:
    ·        Summary transfer from a normal asset master record to the receiver assets (transaction type 348/349)
    ·        Line item settlement of an asset under construction that has line item management
    The Investment Management (IM) component is recommended for handling large-scale capital investments. Using the IM component, you can manage a capital investment in parallel: for financial accounting purposes as an asset under construction, and for controlling purposes as an internal order or project. For more information, see the documentation for the Investment Management component.
    Assets under Construction Without Line Item Management
    The procedure corresponds to the procedure for the transfer between two assets within the same company code (see Posting the Splitting or Moving of an Asset). Before carrying out a full transfer of an asset under construction, you have to reverse any down payments that were posted in the current fiscal year. Down payments are ignored for a partial transfer.
    Special transaction types for the transfer of assets under construction allow for transfers to be displayed in the asset history sheet as acquisitions to fixed assets.
    Assets under Construction with Line Item Management
    In the FI-AA component, you can accumulate costs under purely technical aspects in an asset under construction. You do not need to consider the later creation of fixed assets at this point. During the construction phase, you can accumulate all acquisitions for an investment in a single asset. These acquisitions include
    ·        External activity (acquisition from vendor)
    ·        Internal activity (internal order)
    ·        Stock material (withdrawal from warehouse)
    in a single asset. When using this 'collective management' of assets under construction, it is possible to manage the individual acquisitions as open items over the course of several fiscal years. At completion, the line items must be cleared and then distributed to the various receivers. The system activates open item management when an asset under construction is created, if you set the corresponding indicator in the asset class. In addition, you have to assign a settlement profile to the company codes involved, in Customizing for Asset Accounting, in order for the line item settlement to work (see Define Settlement Profile in the Implementation Guide). The main function of the settlement profile is to specify the allowed receivers (such as, assets or cost centers).
    Hope this helps you. Let me know if you need any other information.
    Rgds
    Manish

  • Asset under construction-IM module

    Hi,
    I am planning to manage the asset under construction (AUC) by the PS module. This means to create the AUC through the WBS element, and finally settle to the final asset. For doing that I understand that the asset under construction class should be created as an investment measure.
    I am asking if it is necessary to implement the IM module to manage the AUC by PS module.
    If it is not necessary which is the difference of having IM implemented?
    Regards,
    Cecilia

    Hi Cecillia,
    To answer your questions:
    You need to define specific asset class for AuC (status of AuC "investment measure" in OAOA)
    You do not need to "implement" IM by creating investment programs but what technically make a internal order or WBS element an investment measure is the presence of an "investment profile" in their master record that will pilot the creation of the AuC. Investment profiles are defined in transaction code OITA that can be found of the IM part of the IMG
    I second Ajay comment regarding the use of WBS elements (PS) vs. internal orders (CO) as investment measures: PS offers a lot more possibilities and options than CO but the set up, maintenance and daily use is much more complex. Take the time to consider both options.
    Good luck and best regards
    Thomas

  • Asset Under Construction Settlement - transaction types 340 & 345

    Hi all,
    My understanding is that
    a) If an Asset Under Construction (AUC) item is settled completely through transaction AIBU, then transaction type 345 is used to credit the AUC GL Account in asset accounting document
    b) If an AUC item pertaining to previous fiscal year is settled completely through transaction AIBU in current fiscal year, then transaction type 340 is used to credit the AUC GL Account in asset accounting document
    Please confirm if my understanding is correct.
    Also, please clarify, which is the program or configuration which proposes transaction type 340 or 345 for AUC settlement accounting document. I understand that transaction type 340 or 345 can't be entered manually & they are automatically determined by the system at the time of settlement
    of AUC through transaction AIBU.

    Hello
    The transaction types posted with AIBU are defined in the IMG:
    Financial Accounting > Asset Accounting > Transactions > Intercompany Asset Transfers > Automatic Intercompany Asset Transfers > Define Transfer Variants
    Transfer variant used in this case is number 6.
    They are also used for settlement purposes. And it is really important their definition regarding dependant areas. As the revaluation area.                                                                               
    It is recommended that transfer variants 4, 5 and 6 do have as transfer method 4. You can check this information in the following SAP notes 300273 and 327088.  
    Regards
    Javier Reviriego

  • FI  posting not allowed for WBS Element

    Hi All,
    While doing down payment billing I'm getting error that FI posting is not allowed for WBS element. But FI periods are open for all months in 2008.
    Please suggest how to resolve this issue.
    Regards,
    Harish

    Hello
    Account assignment
    If you want to post actual costs and commitments to a WBS element, you have to indicate that the WBS element is an account assignment element in the WBS. All objects that can be assigned costs and commitments within a project (for example, orders, networks, or purchase orders) can only be assigned to a WBS element if you have set the account assignment indicator for the element.
    In Customizing for the Project System, you can set an indicator to specify that costs are planned for all WBS elements or only for specific WBS elements.
    Billing
    If you want to post revenues to a WBS element, you have to indicate that the WBS element is a billing element in the WBS.
    Reg
    assign points if useful

  • User Status Change Log for WBS Element

    Hi All,
    I have a requirement to capture the user and time when the user status has changed for WBS Element in TCODE CJ20N.
    How do I enhance the standard table to add these 2 fields and also which enhancement is used to populate these fields?
    Thanks
    David

    hi david,
    if your looking for status changes in WBS for CJ20N tcode then
    have changes documents tick marked in OPSA tcode for a particular project profile and then create project in CJ20N with that project profile and go to that respective WBS and click the blue icon and goto
    Extras->changedocuments->All---> here click on all changes or history ... here this should give you required data your looking for ...
    regards
    pushpa

  • New Depreciation Area in Asset Master Data, for assets under construction.

    Hi,
      The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS.  We had followed three steps
    1. Create Depreciation area via OADB.
    2. Activate Depreciation area via OAYZ.
    3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
    3.1 u2013 Indicator: Leave values initial = ticked.  Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
    In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
    Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
    In Assets Class of AUC we had used  Investmnet Measure as Status of AUC.  
    Kindly provide solution for the same.
    Nikhil

    Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
    5     Investment measure settlement
    Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
    4     Gross method with transfer of values to dependent areas
    This should help.

  • Down payments request for Asset Under Construction

    Hello Expert
    while Down Payment request  to vendors - for Asset Under Construction, system showing error.
    Contact your system administrator (table error)
    Message no. AA866
    Diagnosis
    No account has been entered for posting down payments in area 01 under the account assignment key IN95 (chart of accounts YAIN).
    Procedure
    Enter the account using the Customizing menu.
    Pls Reply frinds.
    regards,
    Riten patel

    Dear:
                   First check in OAYB that have AUC class been specified for down payments and then go to transaction AO90 and maintain the GL account for depreciation are 01 under the Balance Sheet account in the field Acquisition: Down Payment. It will resolve your issue.
    Regards

Maybe you are looking for