Flash CS 5.5 Professional requires 32-bit JVM when publishing for iOS

When trying to publish my file to AIR for iOS I get the following error:
Error: This Java instance does not support a 32-bit JVM.Please install the desired version.
I'm on Mac OS (Mavericks) and have both java 6 (which supports 32-bit) and 7 (which does not) installed. I've verified I can launch a 32-bit jvm from the terminal with "java -d32".
Interestingly, it publishes to AIR with no problems when it's not to iOS.
How can I get Flash to use the correct version of Java? I've tried setting JAVA_HOME to point to version 6 in /etc/profile with still no luck.
Thanks for reading, I will really appreciate the help!!

Ok, found the answer thanks to Christopher Caleb. Needed to upgraded CS5.5's bundled AIR from 2.6 to the current one, and it compiled with no errors. Directions are here for anyone that winds up having the same issue:
http://www.yeahbutisitflash.com/?p=2949

Similar Messages

One Flash CC project gets stuck when publishing in IOS. It will quickly publish as Android, and other projects will publish as IOS. Not sure what to change.

One Flash CC project gets stuck when publishing in IOS. It will quickly publish as Android, and other projects will publish as IOS. Not sure what to change.

Thanks for the info.
I've recently stumbled on an article on how to view the packaged file (apk) published using AIR 3.2 for Android setting (Adobe Flash CS6). All you need to do is change the extension of the file from (.apk) to (.rar) or (.zip) and extract the file as you would with any other zip or rar file. I was able to confirm that the packaged file (apk) indeed contain all the videos for the presentation. I have more than 80 videos in the presentation. All videos included in the package are of the same video format and resolution (FLV 320x240) but of different duration. I intentionally included the all the videos inside the package so I can use the presentation anywhere and anytime without the need to connect to the internet. The packaged apk file size is (1.23GB) the file includes the project's swf and xml file, the component swf and videos.
When installed to android I noticed that the package remained as an apk file. Not really sure if android temporarily unpacks it when you run the app.
Testing phase:
I see no problem when I'm testing the project on my desktop computer. But when packaged and installed on my device the problem arise.
Problem:
I'm able to install and run the app on my device but wont play some of the videos included in the package.
Was this due to the limited RAM or processor of my android device?
I wanted to distribute the presentation to friends so i was trying to package it for easy access and installation on their device.
Alternative Solution:
I installed a third party app called SWF player by BIT LABS. Copied all the files to my device (the project's swf and component swf with the videos). The project worked like a charm the player (SWF player) and was able to run the presentation as if it was running of my desktop. All buttons and videos working properly. Although the alternative solution worked for me I still wanted to package the presentation for easy access and distribution to friends.
Please help...Thanks in advance.

Flash Professional CS5.5 crashes while publishing for iOS

Greetings,
I'm having the same problem as is detailed in the forum post below from March 8th:
http://forums.adobe.com/thread/972499
The problem is that Flash Professional CS5.5 crashes every time I try to publish my 'Hello World' project for iOS. The crash happens anytime I press the OK or Publish buttons while configuring the iOS Settings. This is the tutorial I am attempting to complete:
http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b2-240138de1243a7725e7-7ffc.html
I sent a crash report to adobe, which I could duplicate if that helps.
Any help with this would be greatly appreciated
Thanks,
Jeremy

Hi,
There could be an issue with your latest Java Runtime Environment. Could you please uninstall your current JRE and try install a version prior to that?.
You can find a list of JRE updates here at http://www.filehippo.com/download_jre_32/history/
Thanks!
Mohan

Lag When Programming For iOS Device With Adobe Flash Professional.

Hi, I'm trying to make an Application for iOS device, Everything is find, but when i installed it on my iphone 4 and my iPhone 4S my game start lagging, i don't what to do, i tried to simplifed the code but nothing is working i dont know if it's in the rendering or when i'm trying to export, but on my iPhone it's lagging.
Any Help Please, Solution ?
Thanks
Francis

Target gpu on the device you're testing .. you'll get much better results.
You can do it on the xml configuration file on <renderMode> or if you're publishing in flash on the settings of renderMode select GPU.
Also get rid as much as you can from vector graphics and use bitmaps instead.
You can use Adobe's method of converting a vector in bitmap like this : myMC.cacheAsBitmap = true;
And also if you're moving an object, scaling or changing it's transparency use myMC.cacheAsBitmapMatrix = new Matrix();
These are some basic optimization tips.

Dynamic text not displaying when publishing for flash 8

This dynamic text works fine when the movie is published for
flash 7, but when i export for the flash 8 player it seems to be
invisible. Is there any obvious reason for this happenning?
thanks
jon

Ok, thanks, looks like you've pointed me in the right
direction. I havent fixed it yet though. Heres where i am at:
eval(theTarget+".buttonPrime").tex.embedFonts = false;
now i can see my text. of course its using a default font.
var my_fmt:TextFormat = new TextFormat();
my_fmt.font = "arial14b";
eval(theTarget+".buttonPrime").tex.embedFonts = true;
eval(theTarget+".buttonPrime").tex.text = "wasssup?";
eval(theTarget+".buttonPrime").tex.setTextFormat = my_fmt;
this isnt working. I have added a font object to the library
and linked it for actionscript using the monkier "arial14b".
however my text is quite invisible. i have checcked, 'export in
first frame' for the font object i even tried it with this
deselected. i have deselected the embed font option on the text
feild itself. that doesnt work either (unless i dont try to set the
text format, so long as i accept a default font, its fine).
so err, help?
confused
jon
ps further to this is have discovered more about this strange
behaviour. i can set the text to a different string, provided i do
not try to embed the font in any way. if i set the font to embed, i
can have the text display with the correct font, until i change the
text. then it dissappears. also i cannot seem to affect properties
like font size by means of my TextFormat object. the textFormat
object also does not seem to affect the font of the text.
in short, when exporting for flash 8, i cannot seem to
successfully embed fonts for dynamic text. the only thigs i have
gotten to work are: static text (or a dynamic text feild with
unchanged text) with an embedded font, or dynamic text with a
default font.

Installing Flash on Windows 7 Professional with 64 bit?

We have been unable to make this installaation on several of our office desktops. Any advice is appreciated - thanks!

What exactly means "unable"?
Try the offline installer(s) from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (under the heading Progress bar hangs...).

Flash CS6 does not publish for iOS with ANE included

Hi,
I'm creating a game to run on iOS devices and one of the game requirement is for the device to vibrate on some action.
I added the Vibration.ane file (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html) into the library path in Flash CS6 and also added the extension ID to the XML file. However when I publish the Flash file to check on device, I only keep seeing the "Publishing" loader bar. I've even waited for over 15 mins for it to complete. I get no error, nor does the PC hang, but I can't seem to publish my .app file for device testing.
Also I assume we can't test Vibration functionality with the Simulator that opens during desktop testing. I get the error "The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.adobe.Vibration is not supported for Windows-x86."
Would appreciate help.
Thanks,
Mariam

IPA is ok at the CS6 flash' standard 3.2 export, just tried the new AIR 3.3 also - no problems. I just included the Gyro ANE file, not the SWC
However, because the adl still does not want to preview this thing, development/testing the Gyro stuff is difficult...
I discovered the accelerometer is something different however. Adobe's little remote control thingy on which you can simulate phone position and multitouch emulates the accelerometer, not the Gyro. The Gyro extension taps in to a piece of hardware which really displays the position of the device, not the movement it's been receiving.
Maybe obvious but I thought I'd post this little find, after a day of testing and exporting, syncing, ... this was a tiresome experience...
After all this I can advise to sync the .ipa's with xcode though, instead of iTunes. This works MUCH faster (if you're on mac). Just run xcode, pull up the 'organizer window', select your device and go to the subbranch ' applications'. There you can add the .ipa by clicking on the '+' button

Flash Pro is ignoring changes to my base class when publishing / debugging

Hi,
I hope this will be in the correct section of the forum.
I've been working with Actionscript 3 since a while now although most of the time I've just done straightforward coding using Flash Develop.
This is the first time I'm building a more or less complex project in Flash Pro.
Here's a quick outline of how the project is structured.
There is a swf file which holds a large set of components. Things like Buttons, Sliders, complex List components, etc.
All of them are written from scratch not using any existing components (reason being project requirements).
As someone with a heavy programming background I've done as little as possible in the timeline / frames, most of my code lives in classes which are attached to the components I've created in Flash Pro.
These classes handle all the functionality. These classes then usually inherit from a base class where some basic functionality lies that I need across all components.
The components outlined above are all marked for export and lateron imported into other swf files where they are used.
So far so good, all that works like a charm.
Now here's the actual problem.
Today I needed to make changes to the base class to change some fundamental behaviour across all components that inherit from said base class.
The change in itself was fairly simple.
However, every time I now try to debug or publish it will completely ignore any change I've made and use the previous version of my base class?
I can go as far as completely emptying my base class and every time I debug or publish it will do so using the base class from before. I can see at runtime that it is the previous version because of the behaviour of the inherited components.
That's what I don't get. Where does it take that version from? I tried clearing the publish cash, to no avail.
I can pace tracers, nothing. If I add code to the base class and make an error it will complain so when I try to debug or publish but once fixed, it won't use any of it. It's still behaving as if it's using a previous version.
What makes all this even weirder is that if I take that new code and place it into another class and inherit my components from this one, then the build will use that new verison with the new code. If I switch back to the old base class with exactly the same code inside it will ignore it again and once more behave as if its an older version of it.
I've been looking around the net but simply can't find what this could be caused by.
Now, sure, I could simply use a new class and inherit all my components from a different base class but that's rather unpractical.
What I would like to know is, why does Flash Pro ignore any changes to this class? Is this an issue with how I inherit my component classes from a base class? I kind of doubt it because it has been working like a charm before.
Could this be a Flash Pro issue?
This is also not the first time I've come across this problem. The previous time however, after much tinkering, it went away. Today, it didn't. I would really like to get to the bottom of this.
FYI: I'm running Flash Pro CC. I design my components in Flash Pro and do all my coding in Flash Develop.
Any help would be greatly appreciated.

Hmm, my classes live in a subfolder of where my fla files live. (This sub folder again is divided into further folders to organise the code)
I haven't actually setup any class paths. (default class path is set to .)
If I set the default class path to the folder where my code lives I get a ton of errors telling my that my package names don't reflect the location of my files.
edit: That was a mistake on my side. I've set the class path to where my code lives and made sure the package names still match up.
Unfortunately it still ignores my base class (which lives in a sub folder of the defined class path)

Level-2 GPU published for IOS and Box2D/WCK Does this fall under the revenue share requirements?

WCK uses the Box2D Alchemy port and therefore uses "Domain Memory". Part 1 of premium features usage.
Does publishing to "Level-2 GPU" constitute use of Stage3D? Is this now part 2?
Does our project now fall under the revenue share requirements?
We aren't using Starling or any framework other than WCK.
I wouldn't think Level-2 GPU constitutes use of Stage3D but have to ask.
We would appreciate some clarification from Adobe on this.

Thanks Kevin. I need to read more carefully. We are targeting IOS/Android with this project.
"Level 2 - GPU" is a choice in the "Hardware Acceleration" drop down box on the main Publish Settings screen when
you have Flash (.swf) highlighted in the left pane on Flash Pro CS5.5
The other settings pages have Auto, CPU or GPU under "Rendering" or "Render Mode"
Like I said I need to read more carefully.
What is NOT considered part of the premium features?
The following uses are NOT considered premium and there is no revenue share required for these uses:
Use of domain memory alone,
Use of hardware accelerated Stage3D features alone,
Use of software rendering of Stage3D, or
Use of these features within Flash content packaged as apps using AIR
Thanks again guys

Flash and publishing for iOS (Help Needed)

I currently own Adobe Create Suite 3 Design Premium. I just recently heard that CS 5.5 can develop iOS Apps. So I downloaded trial 2 days ago and thought I would see if I could develop some apps and if things go well upgrade.
Here is the issue I'm running into. I created the CSR file with openssl since I don't own a mac, only a windows 7 based pc. Apples developers program accepted my CSR and created the provisioning file for it.
However, when I go to publish the for iOS it asks for a .p12 file. I found online that is my CSR file. However, it asks for a password. I have no password for it. It does not allow leaving the password field blank, and anything I put in it is incorrect.
All I need help with is the .p12 file and getting past the password and I will be good to go.
Anyone know a step by step guide or could walk me though this part. Thank you and I greatly appreciate it.
~Chris

the only thing is that i havent got a password set to my computer but i will have a look in to that thanks for the help

Is there a way to publish a high-res .ipa from Flash CS5.5 with AIR for iOS?

Hello,
I've developed an app for iOS in Flash specifically for iPad 3's. My client uses SOTI MobiControl as it's mobile device management solution. If I publish out of Flash using AIR SDK 3.1 or newer the app is created and looks high-res on the iPad3. When they try to add the app to SOTI for in-house distribution it errors with the error claiming that "CFBundleDisplayName" has been left blank.
After having looked into it I've been able to find out that when publishing with versions of the AIR SDK older than 3.0, the info.plist file within the app package includes a CFBundleDisplayName. In versions newer than 3.0 there is no CFBundleDisplayName in the info.plist.
Is there a way to publish for iOS from Flash utilizing an older version of the AIR SDK and having true high-res graphics that will look proper on an iPad3?
Thanks in advance for any help.
Phil

It's not AIR that's lacking the key in the plist, it must be Flash Pro, although it's just running adt itself. I use AIR 3.4 and I compile via adt command line (because Flash Builder 4.6 still has not been updated to handle warnings from ANEs during compile, grr). I have CFBundleDisplayName in my plist file. Have you tried compiling on the command line?
Here's an Adobe page with a bunch of examples compiling with ADT on the command line:
http://help.adobe.com/en_US/air/build/WS901d38e593cd1bac1e63e3d128cdca935b-8000.html
Being unaware of what in-house distribution system that actually is, I have noted that some people had previous issues submitting apps Flash compiles. Their solution was to rename the AppName.ipa to AppName.zip, extract the Payload folder, copy the AppName.app inside there out, then rename that AppName.app to AppName.ipa. Then it was accepted. Not sure if that old issue still exists.

I have noticed that when using Tigers Dosk utility to ERASE a flash drive I have a choice of FAT but not FAT32. It seems that flash drives formatted as FAT do not work properly when trying to copy files from a Windows machine. Why?

I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32. I have found that USB FLASH drives formatted as FAT do not always work on Windows machines. Why? How can I use Tiger to format for FAT32?

I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
Can you format it FAT32 on the PC?
Other options would be NTFS or Mac OS Extended...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Can Garageband for iOS record 24bit? (24-bit)

Can garageband for iOS record 24bit? I see other competitors can so wondering if Garageband? Would be a shame
if it can't as of the whole scaling up opening sessions in Logic for further work..
Thanks!

I can't find a defitive support docuemnt from Apple, but as far as I can tell the camera kit can handle 44.1 or 48 kHz 16-bit audio. No evidence of 24-bit support in GB for iOS, either for import or export. Uncompressed audio input files are expected to be in 44.1kHz/16-bit.
tt2

Flash 10. will not install on my Windows 7 Professional machine (64 bit)

II cannot install Flash 10.* on my Windows 7 Professional machine (64 bit). I have uninstalled whatever remnants of an earlier version might have been on the machine. I have tried using various browsers for the installation (Explorer, Firefox, Chrome). I have tried using “Square” as part of the installation. And I have tried “Manual”.
Any suggestions?

What do you mean by "cannot install"? Does the installer give you any indication that says your computer is not supported?

Help Please? Flash Player not working, windows 7 32 bit IE.

Hi. I cannot get the Flash player to play content in Internet Explorer 32 bit. I am extremely frustrated. My info is:
Windows 7/64 bit
All windows updates are current
Dell studio 1749 Lap top
IE 8 32 bit
IE 8 64 bit
32 bit Flash Player 10.1.85.3
64 bit flash player "square" 10.2.161.22
windows firewall
High speed cable with wireless router
Avast antivirus free 5.0.677
I have spent several days reading this forum as well as other forums on the same subject and have tried many many suggestions that have been posted without results. I have checked my user account settings, mine is set to administrator. I have checked and rechecked Internet explorer internet option settings and tried them all including none ( set to not recommended lowest settings) for all the zones. I have reset internet explorer settings under the advanced tab. I have tried to install the flash player many times using both the auto install from the browser window as well as the manual download and install program from your web site many times. I have uninstalled from windows control panel and also using your manual uninstall program between each reinstall attempt.
I have restarted both my computer and internet explorer after each install and uninstall so many times I can't count. There are many other things I have tried as per some of the things I have read but so far no success. The interesting thing i find is while trying to fix this problem i downloaded the flash player code named "square" 64 bit and it works perfectly using Internet explorer 64 bit.
Internet explorere Adobe add ons are:
In IE 32 bit add ons listed are;
shockwave activeX control - enabled
get_atlcom Class - enabled
In IE 64 bit add ons listed are;
shockwave flash object - enabled
Files installed on my harddrive are;
in windows/sysWOW64/macromed/flash
Flash10k.ocx
Flashinstall.log
Flashutil10k_activeX.dll
Flashutil10k_activeX.exe
in windows/system32/macromed/flash
Flash64_10_2_161.ocx
Flashinstall.log
Flashutil64_10_2_161_activeX.dll
Flashutil64_10_2_161_activeX.exe
I hope you are able to assist me in fixing this problem.
Thanks

Good Morning.
I can not get the batch file to create a log file. Anyway the general message throughout the entire batch file report is that nothing succeded. Each time it tried to create a reg key the resulting message is :
Regsetsecurity error : 5 access is denied
When trying to reset FP security permissions:
Set security privilage : access is denied
Warning :unable to SeSecurityPrivilage privilage. This privilage may be required.
Then when it tries to create file "macromed" error is
Createfile error : 1314 A required privilage is not held by the client
Anyway this gives you a general idea of what has happened running the batch file,
I am starting to think we are spending far to much time on this ,but I enjoy the challange to correct the problem.
If this is due to a corruption or some such thing in the registry I could have reformatted and reinstalled My system complete in less than a day. This is the fourth day on this.
If the User Accounts list me as the administrator and there are no other accounts how can I not have the required permissions?

Flash CS 5.5 Professional requires 32-bit JVM when publishing for iOS

Similar Messages

Maybe you are looking for