Grand Total not coming correctly in Tabular report

Hi,
When I extract in Answers the following information:
Dimension 1
Dimension 2
Dimension 3
Metric 1 (sum)(sum i defined in RPD)
Metric 2 (count distinct)(count is defined in RPD)
When doing this, I get the right result for every value of the dimension, but the total of the summation metric is not correct in tabular report
Can someone help me, please?

Hi,
Try this........
Add this <ReportAggregateEnabled>true</ReportAggregateEnabled> somewhere inside your <ServerInstance> and </ServerInstance>
on instance config and restart the presentation services.
Cheers,
Aravind

Similar Messages

Grand Total not displaying correctly on Column level security.

Hi All,
I have implemented the Column level security for three columns. But in dashboard report. The grand total is not displaying correctly. The grand total values are still displayed for the hidden columns.
Is there any work around for this.
The sample how my report looks like after column level security is.
ColumnA Metric1 Metric2 Metrics3(to be hidden)
A 100 200
B 150 100
GrandTotal 250 300 400( this includes the value of A = 300, B = 100).
Regards,
Bhavik

Any pointers please.

Witholding tax amount is not coming correct in FBL1N report.

The WHT amount in vendor line item report in column withholding tax is being displayed without a minus(-) sign indicating a debit amount, but this amount is in fact not a debit amount, when this column is sum up it gives incorrect total.
Regards
Abhisekh Mandal

Dear Abhisekh,
SAP note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
I'm sorry not to help You further.
Mauri

OBIEE11g Grand total not summing up correctly

hi all,
I have to display the grand total from the foll calculation : (total po numbers - total Recd on time PO numbers) / total PO numbers.
To get the total PO numbers - in the Edit formula - COUNT(PO numbers) and aggregation rule is set to SUM - this gives total correctly. eg : count of Total PO numbers - 15
To get the total Recd on time PO numbers-- In the edit formula fields - COUNT(Recd on time PO numbers) and aggregation rule is set to SUM . This also shows hte total correctly. Eg : Count of total Recd on time PO numbers 12
Now I do the division (Recd on time PO numbers/ total PO numbers ) Again in the Edit formula field SUM( COUNT(PO numbers))/ SUM(COUNT(Recd on time PO numbers)) - This gives incorrect results. output is 12.
12/15 should be .8 but it shows 12.
I am not sure why its not doing the calculation correctly.
Is there any way I can achieve this ?
Thanks
OBI_user

* 1.00 => http://gerardnico.com/wiki/dat/obiee/int

BP Balance not showing correctly in Aging report

Good Day all B1 experts,
We are converting to SAP B1 for fiscal year 2010 and earlier today I have found a problem with BP balance on the AR side. Below is a summary of the problem:
Problem:
- For some BP, after I entered opening balances, their total outstanding AR balance was not reflected in the Aging report, nor can be found in the Opening Balance window (under System Initialization).
- However, A/R control General Ledger account is correct and ties to my Year End 2009 Financial Statements
Attempted Solution:
- I reentered the "missing" opening balance for those BP accounts. After entering the numbers, however, the Aging report shows a DOUBLED amount of the correct balance. And when I go check the Opening Balance window, the system is showing the correct BP balance (NOT Doubled).
- Now my A/R control General Ledger and Opening Balance General Ledger Account is out of balance as well. The difference equals to the amount I reentered.
Has anyone encountered similar problem before? I cannot think of anything I did to cause such mess. In any case, I am wondering if I need to use the Restore BP function.
Please provide me some guidance on this. Thanks!!!
BR,
Sunny

Good Morning Kerstin,
Thank you for the article. The version that we are using is 2007A (8.00.180) SP:00 PL:45
In the article, it mentioned about the Single Reconciliation Engine. Do you know if that tool comes along with previous upgrades, or we will have to download and install it?
Actually it seems for one of those problem BP accounts, the correct balance is reflecting on the Aging Report after an invoice was issued yesterday. However, its BP balance is still not correctly reflecting elsewhere (such as Incoming Payment under banking module.)
Regards,
Sunny

Grand Total Not working on Materialized view based table ??

Hi all,
I have a complex report report by using sum and decode function. I precalculated my requirment in database and then create a materialized view based on my sql statement. I import this view in physical and BM model and its results very fine and efficient. But the problem create when I implement Grand Total on my report in table view it did'nt work means (Grand Total is not working on this MV based table) Any idea why ??
any reply would by higly appriciated.
Regards

Hi Zishan,
Check the Aggregation Rule and set it to sum in the table view.
That is go to the "edit formula" tab of the column for which you want grand total and set that to sum.
Hope this will help.
Thanks
Ashok

Difference is not coming correct

Hi guys,
i have two measure a and b
i am doing total by at month level and also a have a calculated column c=a-b
but it is not giving correct result as
a b c
122 123 34 this is total by result.
it should give -1 for c.
so how can i resolve this problem.

Hi,
Create a dummy column [C](drag and drop any column and Rename it into CalumnC) in your report and edit the formula for your columnC
and the do your calculation like IfNull(Tablename.columnA,0) - IfNull(Tablename.ColumnB,0) and
set Aggregation Rule is Server Determined
Thanks,
Balaa...

Subtotal / Grand total not working

I am new to OBIEE & I could not get a simple 'Total By' or 'Grand Total' in Answers, Table view. The default aggregation rule in Administrator is selected as 'Sum'. When I click on the 'E' summation icon, nothing happens. What am I missing?
Thanks,
Dinesh.

OK. I figured out what was wrong. I did not put the logical schema in a star schema approach (dimensions & facts). Once I did that, the sub-totals & grand totals started working.
But I am greatly disappointed by this limitation. I just have a copy of my transactional database & I do not want to do star schema data modelling so that I can quickly start reporting. Is there any work-around for this?
Thanks,
Dinesh.

Kazakh characters not shown correctly in BO reports

Context :
While doing a project in KZ we make use of Business objects (BO XI R3 SP1) to generate reporting.
The language used for the reporting is Russian, but some client identification data of the company, which contains Kazakh characters, should be shown in the reports.
Problem :
KZ characters are not shown correctly in the BO reports (majority of time '?' is shown)
Details :
As I understand BO doesn't support the KZ language. We get the following message (CS : invalid native charset).
NLS_LANG : Russian : .CL8MSWIN1251 --> works
NLS_LANG : Kazakh : .CL8RK1048 --> not supported by BO. (This is though supported by the Oracle client and functions when we use SQL Plus)
Is there a workaround available to show KZ characters correctly in BO ?
Thanks

See my comments in this post:
client_get_file_name do not go to specified folder

Output not coming correct

Hi,
I had developed this code and after all modifications and alterations in it ,i am pasting here bcoz it is still giving the problem that the values of ITAB does not contain the correct data as it keep on repeating the same value for the data in ITFINAL.
Plzz go through this code and help me out as i tried whole day and still it is not coming right.
My job is online bcoz if it start displaying correct data then i have to make addition in other code also. plzz helpme out as help will be definately rewarded.
here's the code:-
TABLES: BKPF,MKPF,BSIK.
DATA: BEGIN OF ITBKPF OCCURS 0,
      BUKRS LIKE BKPF-BUKRS,
      BELNR LIKE BKPF-BELNR,
      GJAHR LIKE BKPF-GJAHR,
      AWTYP LIKE BKPF-AWTYP,
      AWKEY LIKE BKPF-AWKEY,
      BUDAT LIKE BKPF-BUDAT,
      END OF ITBKPF.
DATA: BEGIN OF ITMKPF OCCURS 0,
      MBLNR LIKE MKPF-MBLNR,
      MJAHR LIKE MKPF-MJAHR,
      END OF ITMKPF.
DATA: BEGIN OF ITAB OCCURS 0,
      BELNR LIKE BSIK-BELNR,
      WRBTR LIKE BSIK-WRBTR,
      LIFNR LIKE BSIK-LIFNR,
      BUKRS LIKE BSIK-BUKRS,
      GJAHR LIKE BSIK-GJAHR,
      BUDAT LIKE BKPF-BUDAT,
      END OF ITAB.
DATA: BEGIN OF ITFINAL OCCURS 0,
      BUKRS LIKE BKPF-BUKRS,
      BELNR LIKE BKPF-BELNR,
      GJAHR LIKE BKPF-GJAHR,
      AWTYP LIKE BKPF-AWTYP,
      AWKEY LIKE BKPF-AWKEY,
      MBLNR LIKE MKPF-MBLNR,
      MJAHR LIKE MKPF-MJAHR,
      WRBTR LIKE BSIK-WRBTR,
      LIFNR LIKE BSIK-LIFNR,
      END OF ITFINAL.
*PARAMETERS: P_BUKRS LIKE BKPF-BUKRS,
           P_GJAHR LIKE BKPF-GJAHR,
           S_LIFNR LIKE BSIK-LIFNR.
SELECT-OPTIONS: P_BUKRS FOR BKPF-BUKRS,
                P_GJAHR FOR BKPF-GJAHR,
                S_LIFNR FOR BSIK-LIFNR.
      SELECT ABUKRS ABELNR AGJAHR AAWTYP AAWKEY ABUDAT INTO TABLE ITBKPF FROM BKPF AS A
      WHERE AAWTYP = 'MKPF' AND ABUKRS IN P_BUKRS AND A~GJAHR IN P_GJAHR.
      IF NOT ITBKPF[] IS INITIAL.
      SELECT AMBLNR AMJAHR INTO TABLE ITMKPF FROM MKPF AS A FOR ALL ENTRIES IN ITBKPF WHERE A~MBLNR = ITBKPF-AWKEY(10).
      SELECT ABELNR AWRBTR ALIFNR ABUKRS AGJAHR BBUDAT FROM BSIK AS A
      INNER JOIN BKPF AS B ON BBELNR = ABELNR
      INTO TABLE ITAB
      WHERE
      A~LIFNR IN S_LIFNR.
      ENDIF.
SORT ITAB BY BELNR.
LOOP AT ITBKPF.
CLEAR ITMKPF.
READ TABLE ITMKPF
WITH KEY MBLNR = ITBKPF-AWKEY+(10)
          MJAHR = ITBKPF-AWKEY+10(4).
CHECK sy-subrc EQ 0.
ITFINAL-BELNR = ITBKPF-BELNR.
ITFINAL-GJAHR = ITBKPF-GJAHR.
ITFINAL-AWKEY = ITBKPF-AWKEY.
READ TABLE ITAB
WITH KEY BUKRS = ITBKPF-BUKRS.
CHECK sy-subrc EQ 0.
ITFINAL-WRBTR = ITAB-WRBTR.
ITFINAL-LIFNR = ITAB-LIFNR.
APPEND ITFINAL.
CLEAR ITFINAL.
ENDLOOP.
LOOP AT ITFINAL.
WRITE: / ITFINAL-BELNR , ITFINAL-GJAHR, ITFINAL-AWKEY+(10),ITFINAL-WRBTR ,ITFINAL-LIFNR .
ENDLOOP.

Hi,
I had checked the all Interenal Tables and each and every table is having the desiered data except ITFINAL.,it is storing the value of ITAB
i.e. displaying the same record for the data coming from the ITBKPF ,now my problelm is how to display the correct data from ITAB to the ITFINAL which is not able to store this coreect data,plzz help me out in solving this problem .
The code in am using right now is:-
TABLES: BKPF,MKPF,BSIK.
DATA: BEGIN OF ITBKPF OCCURS 0,
      BUKRS LIKE BKPF-BUKRS,
      BELNR LIKE BKPF-BELNR,
      GJAHR LIKE BKPF-GJAHR,
      AWTYP LIKE BKPF-AWTYP,
      AWKEY LIKE BKPF-AWKEY,
      BUDAT LIKE BKPF-BUDAT,
      END OF ITBKPF.
DATA: BEGIN OF ITMKPF OCCURS 0,
      MBLNR LIKE MKPF-MBLNR,
      MJAHR LIKE MKPF-MJAHR,
      END OF ITMKPF.
DATA: BEGIN OF ITAB OCCURS 0,
      BELNR LIKE BSIK-BELNR,
      WRBTR LIKE BSIK-WRBTR,
      LIFNR LIKE BSIK-LIFNR,
      BUKRS LIKE BSIK-BUKRS,
      GJAHR LIKE BSIK-GJAHR,
      BUDAT LIKE BKPF-BUDAT,
      END OF ITAB.
DATA: BEGIN OF ITFINAL OCCURS 0,
      BUKRS LIKE BKPF-BUKRS,
      BELNR LIKE BKPF-BELNR,
      GJAHR LIKE BKPF-GJAHR,
      AWTYP LIKE BKPF-AWTYP,
      AWKEY LIKE BKPF-AWKEY,
      MBLNR LIKE MKPF-MBLNR,
      MJAHR LIKE MKPF-MJAHR,
      WRBTR LIKE BSIK-WRBTR,
      LIFNR LIKE BSIK-LIFNR,
      END OF ITFINAL.
*PARAMETERS: P_BUKRS LIKE BKPF-BUKRS,
           P_GJAHR LIKE BKPF-GJAHR,
           S_LIFNR LIKE BSIK-LIFNR.
SELECT-OPTIONS: P_BUKRS FOR BKPF-BUKRS,
                P_GJAHR FOR BKPF-GJAHR,
                S_LIFNR FOR BSIK-LIFNR.
      SELECT ABUKRS ABELNR AGJAHR AAWTYP AAWKEY ABUDAT INTO TABLE ITBKPF FROM BKPF AS A
      WHERE AAWTYP = 'MKPF' AND ABUKRS IN P_BUKRS AND A~GJAHR IN P_GJAHR.
      IF NOT ITBKPF[] IS INITIAL.
      SELECT AMBLNR AMJAHR INTO TABLE ITMKPF FROM MKPF AS A FOR ALL ENTRIES IN ITBKPF WHERE A~MBLNR = ITBKPF-AWKEY(10).
      SELECT ABELNR AWRBTR ALIFNR ABUKRS AGJAHR BBUDAT FROM BSIK AS A      "
      INNER JOIN BKPF AS B ON BBELNR = ABELNR
      INTO TABLE ITAB
      WHERE
      ALIFNR IN S_LIFNR.    "ABUKRS = B~BUKRS.
      ENDIF.
      SORT ITAB BY BELNR.
     SELECT ABELNR AWRBTR ALIFNR ABUKRS A~GJAHR FROM BSIK AS A INTO TABLE ITAB
     FOR ALL ENTRIES IN ITBKPF
     WHERE
     ABUKRS = ITBKPF-BUKRS AND ALIFNR = S_LIFNR.
     ENDIF.
LOOP AT ITBKPF.
CLEAR ITMKPF.
READ TABLE ITMKPF
WITH KEY MBLNR = ITBKPF-AWKEY+(10)
          MJAHR = ITBKPF-AWKEY+10(4).
CHECK sy-subrc EQ 0.
ITFINAL-BELNR = ITBKPF-BELNR.
ITFINAL-GJAHR = ITBKPF-GJAHR.
ITFINAL-AWKEY = ITBKPF-AWKEY.
SORT ITAB[] BY BELNR GJAHR BUKRS.
READ TABLE ITAB
WITH KEY
BELNR = ITBKPF-BELNR
GJAHR = ITBKPF-GJAHR
BUKRS = ITBKPF-BUKRS
BINARY SEARCH.
CHECK sy-subrc EQ 0.
ITFINAL-WRBTR = ITAB-WRBTR.
ITFINAL-LIFNR = ITAB-LIFNR.
APPEND ITFINAL.
CLEAR ITFINAL.
ENDLOOP.
LOOP AT ITFINAL.
WRITE: / ITFINAL-BELNR , ITFINAL-GJAHR, ITFINAL-AWKEY+(10),ITFINAL-WRBTR ,ITFINAL-LIFNR .
ENDLOOP.
Edited by: abaper2008 on May 29, 2008 6:35 AM
Edited by: abaper2008 on May 29, 2008 9:21 AM

ME2L : still to be delivered is not displayed correctly in ALV report

Dear All,
The still to be delivered and still to be invoiced quantity is not being displayed correctly in ME2L report. In BEST format the report displayes the correct values. In the ALV form the quantity is same as the ordered quantity.
can anyone he

If the selection is the same for BEST layout and ALV layout then the results should equal.
if a field in ALV display has a different value than in the old list display, then it pretty much looks like a bug, and bugs can only be erased by program changes from SAP via OSS notes.
Check SAPNet for notes, open a message yourself to SAP if you dont find any.

Wagetype calculation not coming correctly

Hi
Whenever we run a transfer action in between the payroll period wagetypes which we have maintained in 14 Infotype are not calculating correctly.
Ex: Performance pay wagetype is there Amt is Rs 1000 start date 01.04.2008 and end date 31.12.9999. If we run transfer action on 15.04.2008 at the end of the payroll period i.e., 30.04.2008 Payout in this particular wagetype should be 1000 but it is coming as Rs 500
What we have do suggest please
Thanks
Mahantesh

Hi
Amount whatever it is calculating is taking in to account the Loss of pay days is correct.
Problem is when we transfer the employee in between the payroll period while we getting the payout for the period for the earliest record
Ex Employee 1001 holding Postion X from 01.01.2008, on 15.04.2008 transfered to postion Y.
This employee is getting the payout from 15.04.2008 to 30.04.2008 for tht particular month.
Again in the next month from 01.05.2008 to 31.05.2008 he will get the correct payout
whenever we run action in between the payroll period this problem is coming
Thanks

Need to display grand total text in OOPS ABAP ALV report

Hi
I am using OOPS for alv display and need to display grand "total text" in any column in th eoutput display.
I know the procedure to display in ALV display. but dont have idea in OOPS. Please help.
Thanks
Amminesh.

hi,
follow this link for alv's with oop's oncept.
http://abapreports.blogspot.com/2008/06/alv-grid-display-with-oops.html
for calculating total to the specific field.....
while creating the fieldcatalog pass the value 'X' to field do_sum of lvc_t_fcat( field catalog).
data: fcat type lvc_t_fcat.
fcat-fieldname = <field-name>.
fcat-ref_table = <ref-tablename>.
fcat-ref_field = <ref-fieldname>.
fcat-do_sum = 'X'.
regards,
Ashok

Report output not coming correctly

Hi All,
my query is like
select 'gggohpoopiokoljmkjjg@@@@@' record from dual;
where record string's length is more than 2000 characters.
I am using oracle report for this purpose as i have some other validations associated with it.
i am printing the report output in a flat file.i want ALL THE OUTPUT SHOULD COME IN ONE LINE.
but this is not happenning so...for the string lengths more than 1000 it's coming in diff line.
How can i make sure that my output file WILL BE IN SINGLE LINE.
i tried in unix vi editor i can give 3000 charecters but it doesn't go to the second line.
any help on this issue will be helpful
thanks in advance

If there's no easy way to do it, you may use a "special character", like chr(xx), as your long line delimiter to chop a line into a couple of lines. Then you write a very simple C program to post-process the report output file to remove these "special character".
If all characters are possible in your report file, you may use a string as the delimiter.

Totals not working correctly

I am trying to create a calculation by evaluating a set of records and including only those that meet the criteria in the total. The calculation seems to work correctly on the individual records, but the total does not... it seems to be doubling the result. Here's the calculation:
SUM(CASE WHEN ( Tx Period."Tx Period Year" = '2007' AND Activity Composite fact.Activity Date <= TO_DATE('07-MAR-2007') ) THEN Activity Composite fact.Activity Amount ELSE 0 END)
Any help appreciated

Hi,
Are there any Page Items on the report?
Is the report output displayed for all the records? Also, check if "Hide duplicate rows" is checked.
Thanks.

Grand Total not coming correctly in Tabular report

Similar Messages

Maybe you are looking for