Help with SlideShowPro FullScreen Mode

I have been knocking myself out on this problem for 6 weeks, posted on the SSP Forums, but still no solution.
I now have two test sites posted, they are identical except that one site has all the SSP components programmed to open in FullScreen mode when clicked in the center and the other is programmed to only toggle the display mode (play/pause) without any fullscreen capability. The non-FullScreen capable site works perfectly, but the FullScreen enabled site loses its mind (always in a different way) when returning from FullScreen mode. Even the FullScreen enabled site works perfectly until FullScreen is first activated - after that it is anyones guess what happens next?
Non-FullScreen Enabled Site (always works as expected):
http://www.scottbrackenphotography.com/index.html
FullScreen Enabled Site (never works as expected):
http://www.scottbrackenphotography.com/indexTest.html
Once FullScreen is activated, upon returning to site, sometimes some of the different menu buttons in the site no longer work, or they take you to the wrong section, and pretty much 100% of the time if you click on Subscribe, Prints, Info, or Contact one of the SSP movies will run in the background (and there are NO INSTANCES OF SSP ON ANY OF THOSE MOVIE FRAMES!).
The SSP Tech Support keeps telling me to use the halt(); method. They say my problem is that remnants of the SSP component are being left behind when returning from FullScreen mode in Flash and that the halt(); method flushes those remnants out. I have tried writing the AS3 code 10 different ways to call this halt(); method on an SSP instance, but just get various errors.
Has anyone ever used the halt() method? If so, do you have any code examples?
Thanks!

quzsd,
Thank for the reply, but could you maybe post how you used the halt(); method in an actual function or handler so that I can see how you actually called it in the ActionScript? I am assuming that I have to attach it to a button?

Similar Messages

  • WRT610N Help with the network mode changing to an A.

    Hello All,
    I just purchased a WRT610n Router, the wireless n adapter, and the gaming router, My question to you the customer is have any of you had problems with the gaming router switching to a wireless A network mode , I have my gaming system on 5nhz and I want the transfer rate to be at the highest possible rate and I know switching to an A network will change that transfer rate I am only 25 feet away on one level so any suggestions would be helpful or comments as well.
    Message Edited by ChrisM1981 on 01-19-2009 11:14 AM

     Hello,
    I have WRT610N, WGA600N, and I am on Comcast Broadband Transfer Rate Of 1GBPS on my p.c. and the transfer rate on my notebooks is 130MBPS to 230MBPS also I am running my gaming System on the Dual Band 5NHZ like I said I am on one level with nothng between the Router & Adapter so I am wondering why it is transfering to 802.11a Frequency because I know that lowers Tranfer Rate from a Wireless N Frequency so any help you can give me that would be great.
    Thank you

  • Help with wrt310n n mode operation

    In n mode, i can connect to my laptop from the wireless router. However if I include wep or wpa-personal I cannot connect. the laptop is running vista. beacon int 75, DTIM 1, Frag 2306, RTS 2307
    In G or mixed mode all works 54 mbps, but that defeats the purpose of N at 130mbps
    I would really appreciate help.
    (Mod note: Edited for guideline compliance.)
    Message Edited by giantherockstar on 11-18-2008 01:03 PM

    Do you use N adapter on the other side.

  • Help with Target Disk Mode

    I'm having some problems starting up a Power Mac G4 into target disk mode. I've done it before, a couple weeks ago, but now every time I try it instead starts up into open firmware mode. I can't figure out what's going on, any help would be greatly appreciated.

    Welcome to the forum.
    Firstly, let's check a few things. Have a look at APPLE'S KNOWLEDGE BASE on how to do it. If that's what you're doing then report back.

  • Help with transparency & blend modes?

    Well, I'm making a book cover
    The idea is that I have a background on top of which i put a label which will contain the name of the book but will "cut out" through the label to show the background.
    I've done a sketch in Ideas, here it is
    Now, the question is how would I do this in Illustrator, but with a actual object and a font instead of erasing out of a rectangle on an iPhone
    Many thanks in advance!

    Jonas,
    You may:
    1) Create the Type (no need to outline) on top of the label,
    2) Select both (and nothing more) and in the Tranparency palette flyout tick Make Opacity mask.
    If the Type is black have both Clip and Invert Mask unticked (if it is white, tick Invert Mask, hardly relevant here).

  • My own built fullscreen mode flv player is not working in Mac OS

    I built a flv player, it is just a normal video player with a
    fullscreen mode.
    The video player is work fine in Window IE, FF, and Safari.
    But not not working in Mac OS X, leopard & tiger &
    May I know what might cause this problem?
    I m usng action script 3, flash cs3 & all my browsers
    already upgrade to latest version of Flash Player.
    Help!!!

    I am running Mac OS X 10.10.1 Yosemite and iPhoto Version 9.6 (910.29). Automatic updates in the Mac App Store is turned on for my iMac and it shows no updates available. I was told directly by Apple Support on the date that I wrote this article (Nov 8, 2014) that there were no Canon drivers and photo transfer software that worked with Yosemite. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution. At that time I was running Mac OS X 10.10 (because the 10.10.1 update was not yet available) and the most up-to-date version of iPhoto for Mac OS X 10.10 that was available at that time, at least per the Mac App Store. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution.
    With the Mac OS X 10.10.1 update if the camera is in PTP communications mode the thumbnails now appear in the Import screen in iPhoto almost immediately. If the camera is returned to Normal communications mode; however, it takes forever for the thumbnails to appear. I have been waiting 10 minutes and iPhoto has generated only 14 thumbnails. So it appears that there is still something not working properly between the original Canon EOS Digital Rebel and Mac OS X Yosemite 10.10.1 when the communications mode on the camera is set to Normal.

  • App switching in fullscreen mode: Losing Focus

    I have my mac running Mountain Lion (Ver 10.8.2) and have noticed that when switching between applications when fullscreen mode is involved that the application I am switching to loses focus.
    Scenarios:
    Switching from fullscreen app -> fullscreen app
    Switching from fullscreen app -> not fullscreen app
    Switching from not fullscreen app -> fullscreen app
    For all of the above scenarios when the switch is completed, the app I am switching to loses focus, but the application bar still shows the correct application name (so it doesn't just switch to Finder). This happens regardless of if I use a multitouch gesture or CMD+TAB to do the switch. Also, when this happens "CMD + ~" doesn't switch between windows of the application switched to.
    I would expect these scenarios to work the same as switching between regular applications where the one you switch to is in focus after the switch. Is this a bug with the fullscreen mode? or is there a setting I missed that can fix it? or is it a "feature"?
    I thank you for any help you can provide - this irritating bug makes it impossible for me to use fullscreen mode for my purposes.

    That was the problem! I had Live Wallpaper installed and running, so I guess I won't use that until there is an update to fix te problem.
    Thanks!

  • Problem with Adobe Flash Player in fullscreen mode

    Hi everybody, I have noticed a problem with flash player while I'm watching streaming programs in fullscreen mode.
    The problem is that when I'm watching something in fullscreen mode and the quality is set to "high" I have a stammer in both sound and image.
    When I 'm watching in "medium" quality everything is fine in fullscreen mode.
    The default selection is "high", how can I change this to "medium" ?
    It's very annoying to change this all the time manually.
    thxx in advance
    p.s. I use windows 7 64bit ultimate and the latest version of both firefox and adobe flash player

    So, you didn't need help with anything, you just wanted to rant?

  • Need a bit of help with css and fullscreen

    I am currently doing a javaFX application for my university project, I have it everything nearly finished, but need to finish the css component to make the application "prettier" (I am not very good on graphic design to be honest). So if i could get a bit of help on this little issue I'd be very grateful.
    is there any way to make fullscreen (and if possible resizing window) to instead rearranging everything to actually do a fullscreen (like the games) and everything "grows accordingly (even though in games what it usually does is to change the screen resolution, is that possible to reproduce with javaFX?) also how to remove the message and the effect on click the "esc" key to exit the fullscreen mode?
    i know that removing the focus effect on an element is with the following (if a button)
    .button:focused{
         -fx-background-insets: 0;
    }but,is there any way to remove the effect on anything focused (TextField, Combo Box, ...)? (tried with a .textfield:focused but it did not work)
    also i wanted to produce the focused effect by this way but it didn't work, how should i do it? (in fact even if i try to put this line on the button:focused, the focused effect gets removed from there, because of the insets line)
    #highlight{
         -fx-background-insets: 2;
         -fx-background-color: yellow;
    public class controller extends StackPane implements Initializable{
         public void highlight(){
              this.getStyleClass().add("highlight");
    and last thing (for the moment) the .button seems to work for all the buttons, but trying another thing like .gridpane or .textfield or .scrollpane does not seem to work, is there any way to make it work or i should add "id" to all the elements and use the # instead?

    i wrote all them in the same thread becsause there were a total of 4 (and could had been more) separated by ----
    should i leave it how it is or open now 4 threads for each question?

  • How to switch fullscreen mode with normal mode in OSMF with mediacontainer and mediaplayer?

    i use OSMF to make a video player ,use the mediacontainer and mediaplayer ,all works right but to switch from normal to fullscreen mode ,i don't know how ?
    because my videoplayer can be resized with some ratio ect 50%.
    anyone do something similar to this? any help?
    thanks very much!

    I did this:
    public function toggleFullScreen( event:Event=null ):void
    if( this.stage.displayState == StageDisplayState.NORMAL )
    // set full screen display
    this.stage.scaleMode = StageScaleMode.NO_SCALE;
    $playerInstance.width = $stage.fullScreenWidth;
    $playerInstance.height = $stage.fullScreenHeight;
    bg.height = $stage.fullScreenHeight;
    $playerInstance.addChild(controlBar2);
    LayoutMetadata($playerInstance.media.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE)).scaleMo de= ScaleMode.ZOOM;
    var resultRect:Rectangle = new Rectangle(0, 0, $stage.fullScreenWidth, $stage.fullScreenHeight);
    stage.fullScreenSourceRect = resultRect;
    this.stage.displayState = StageDisplayState.FULL_SCREEN;
    else
    $playerInstance.width = 600;
    $playerInstance.height = 400;
    $playerInstance.mediaContainer.width = 600;
    $playerInstance.mediaContainer.height = 400;
    LayoutMetadata($playerInstance.media.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE)).scaleMo de= ScaleMode.LETTERBOX;
    bg.height = 400;
    // set normal display
    stage.fullScreenSourceRect = null;
    this.stage.scaleMode = StageScaleMode.NO_SCALE;
    this.stage.displayState = StageDisplayState.NORMAL;

  • Problem with Fullscreen mode

    Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

    Hi There
    By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
    1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
    2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
    3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
    I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
    You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
    Hope this helps
    J.C

  • BugReport : System Dead when change display rotation with fullscreen mode app

    There is a big bug in fullscreen mode with display rotation.
    I find that if you try dispaly rotation after make some app(safari) fullscreen mode then the system crash.
    1. I have mac book pro 13Inch Mid 2010,
    2. Add one more display (display2)
    3. open safari, make fullscreemode at display 2
    4. open system preferences > displays > change display 2 rotations setting.
    then CRASH and System Dead.

    Amazing, it seems to work ! Thank you for your help stqn.
    I just have a little question if I choosed compiz it s for there plugin they have, called "scale" that whenever yout put your mouse on a corner its shows all the windows that you have on the current screen. A bit like Mac OS X. I am not a fanatic of Alt TAB to switch windows, and I really find convenient this plugin.
    Do you know if it would be possibile such a thing on LXDE openbox with compton ?

  • Visualizer with update not working in fullscreen mode

    I just did the most recent itunes download and now the visualizer won't go into fullscreen mode! Even if I press command  + F. Please help!

    hello niunaiwehua, you will probably get more helpful answers, when you post your question in a forum specialised on flash development like [http://forums.adobe.com/community/flash]. thank you

  • Help about importing files and fullscreen mode

    Hi,
    sorry but i'm kinda new about this. I'm creating a kiosk for my company which uses a touchscreen PC like what you see in the malls right now i.e directory. Im using flash cs5 and AS3. My problem is when I imported video / swf file in my stage (which is in full screen when loaded in projector), the video / swf file automatically change to full screen also. What I like to do is even if my window is in full screen mode, the video will still be the same what I set it to be. For you to imagine what im doing is in my homepage, my buttons would be video/swf files placed side by side. Once I click on one video it will go to another scene just like a website. I tried to google about this but no luck, all i find is how to import. These are the codes i used to load my project in fullscreen mode automatically.
    var main:Stage = this.stage;
    main.scaleMode = StageScaleMode.NO_SCALE;
    main.scaleMode = StageScaleMode.EXACT_FIT;
    main.align = StageAlign.TOP;
    main.displayState = StageDisplayState.FULL_SCREEN;
    Hope you can help me on this. Thanks in advance for those who will help.
    Thank you
    -Arjae

    thanks andrei. but it still doesn't solve my problem.
    var main:Stage = this.stage;
    main.scaleMode = StageScaleMode.NO_SCALE;
    //main.scaleMode = StageScaleMode.EXACT_FIT;
    main.align = StageAlign.TOP;
    main.displayState = StageDisplayState.FULL_SCREEN;
    as u have said, i remove scale_fit line but still in full screen. when I run s swf file the video automatically converted to full screen. what i only want to make full screen is the stage where the video is located. is there some command i need to do on this? I tried to use this using AS2 and its ok, the video didn't go full screen even the stage itself is in fullscreen. but i really want to use AS3 because of some features. If you can help, it will be great. Thanks lot!

  • Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

    Hi 
    Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
    How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
    For Example: if i have 4 users, A, B, C and D. what i want is:
    User A can see everything and act as a project manager or Admin.
    User B can view all projects in project centre but can change the schedule or resource assignment etc.
    User C can only act as approver of projects and can view all projects in project centre.
    User D can only view specific projects for which permissions are given.
    can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
    Thanks in Advance
    Cheers
    AJ
    Ajay Kumar

    Hi Ajay,
    Please refer to this link for detailed explanations about PS2013 security model. 
    http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
    Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
    define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
    level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
    I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
    Concerning your 4 users:
    user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
    user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
    user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
    concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
    and approves resource timesheet.
    user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
    timesheets and/or tasks updates which must be approved.
    Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

Maybe you are looking for