Help with wrt310n n mode operation
In n mode, i can connect to my laptop from the wireless router. However if I include wep or wpa-personal I cannot connect. the laptop is running vista. beacon int 75, DTIM 1, Frag 2306, RTS 2307
In G or mixed mode all works 54 mbps, but that defeats the purpose of N at 130mbps
I would really appreciate help.
(Mod note: Edited for guideline compliance.)
Message Edited by giantherockstar on 11-18-2008 01:03 PM
Do you use N adapter on the other side.
Similar Messages
-
Help with oracle 11g pivot operator
i need some help with oracle 11g pivot operator. is it possible to use multiple columns in the FOR clause and then compare it against multiple set of values.
here is the sql to create some sample data
create table pivot_data ( country_code number , dept number, job varchar2(20), sal number );
insert into pivot_data values (1,30 , 'SALESMAN', 5000);
insert into pivot_data values (1,301, 'SALESMAN', 5500);
insert into pivot_data values (1,30 , 'MANAGER', 10000);
insert into pivot_data values (1,301, 'MANAGER', 10500);
insert into pivot_data values (1,30 , 'CLERK', 4000);
insert into pivot_data values (1,302, 'CLERK',4500);
insert into pivot_data values (2,30 , 'SALESMAN', 6000);
insert into pivot_data values (2,301, 'SALESMAN', 6500);
insert into pivot_data values (2,30 , 'MANAGER', 11000);
insert into pivot_data values (2,301, 'MANAGER', 11500);
insert into pivot_data values (2,30 , 'CLERK', 3000);
insert into pivot_data values (2,302, 'CLERK',3500);
using case when I can write something like this and get the output i want
select country_code
,avg(case when (( dept = 30 and job = 'SALESMAN' ) or ( dept = 301 and job = 'SALESMAN' ) ) then sal end ) as d30_sls
,avg(case when (( dept = 30 and job = 'MANAGER' ) or ( dept = 301 and job = 'MANAGER' ) ) then sal end ) as d30_mgr
,avg(case when (( dept = 30 and job = 'CLERK' ) or ( dept = 302 and job = 'CLERK' ) ) then sal end ) as d30_clrk
from pivot_data group by country_code;
output
country_code D30_SLS D30_MGR D30_CLRK
1 5250 10250 4250
2 6250 11250 3250
what I tried with pivot is like this I get what I want if I have only one ( dept,job) for one alias name. I want to call (30 , 'SALESMAN') or (301 , 'SALESMAN') AS d30_sls. any help how can I do this
SELECT *
FROM pivot_data
PIVOT (SUM(sal) AS sum
FOR (dept,job) IN ( (30 , 'SALESMAN') AS d30_sls,
(30 , 'MANAGER') AS d30_mgr,
(30 , 'CLERK') AS d30_clk
this is a simple example .... my real life scenario is compliated with more fields and more combinations .... So something like using substr(dept,1,2) won't work in my real case .
any suggestions get the result similar to what i get in the case when example is really appreciated.Hi,
Sorry, I don't think there's any way to get exactly what you requested. The values you give in the PIVOT ... IN clause are exact values, not alternatives.
You could do something like this to map all alternatives to a common value:
WITH got_dept_grp AS
SELECT country_code, job, sal
, CASE
WHEN job IN ('SALESMAN', 'MANAGER') AND dept = 301 THEN 30
WHEN job IN ('CLERK') AND dept = 302 THEN 30
ELSE dept
END AS dept_grp
FROM pivot_data
SELECT *
FROM got_dept_grp
PIVOT ( AVG (sal)
FOR (job, dept_grp)
IN ( ('SALESMAN', 30)
, ('MANAGER' , 30)
, ('CLERK' , 30)
;In your sample data (and perhaps in your real data), it's about as easy to explicitly define the pivoted groups individually, like this:
WITH got_pivot_key AS
SELECT country_code, sal
, CASE
WHEN job = 'SALESMAN' AND dept IN (30, 301) THEN 'd30_sls'
WHEN job = 'MANAGER' AND dept IN (30, 301) THEN 'd30_mgr'
WHEN job = 'CLERK' AND dept IN (30, 302) THEN 'd30_clrk'
END AS pivot_key
FROM pivot_data
SELECT *
FROM got_pivot_key
PIVOT ( AVG (sal)
FOR pivot_key
IN ( 'd30_sls'
, 'd30_mgr'
, 'd30_clrk'
;Thanks for posting the CREATE TABLE and INSERT statements; that really helps! -
Created new subject: HELP with WRT310N
I am not sure how to post so i have been looking for a problem simuliar to mine. I have a WRT310N and when i have 2 xboxs running at the same time it always comes up as 1 with a NAT type of MODERATE connection. Is this router a switch or is it capable of running to 2 xboxs with a open conection? I have default setting with the proper ports triggered. PLEASE HELP, i have been beating my head against the wall trying to figure this out. Once in a great while it comes up as both xboxs are open
(Mod note: Moved post and created new subject line.)
Message Edited by OnnagokorO on 01-23-2010 09:41 PMI really think you should start a new thread on this.
it doesn't really have anything to do with this subject.
You get more response by posting a new topic as well. -
WRT610N Help with the network mode changing to an A.
Hello All,
I just purchased a WRT610n Router, the wireless n adapter, and the gaming router, My question to you the customer is have any of you had problems with the gaming router switching to a wireless A network mode , I have my gaming system on 5nhz and I want the transfer rate to be at the highest possible rate and I know switching to an A network will change that transfer rate I am only 25 feet away on one level so any suggestions would be helpful or comments as well.
Message Edited by ChrisM1981 on 01-19-2009 11:14 AMHello,
I have WRT610N, WGA600N, and I am on Comcast Broadband Transfer Rate Of 1GBPS on my p.c. and the transfer rate on my notebooks is 130MBPS to 230MBPS also I am running my gaming System on the Dual Band 5NHZ like I said I am on one level with nothng between the Router & Adapter so I am wondering why it is transfering to 802.11a Frequency because I know that lowers Tranfer Rate from a Wireless N Frequency so any help you can give me that would be great.
Thank you -
Help with Nokia e5's Operating bands
Hello I want to buy a Nokia E5-00 and I have a doubt about the operating bands. Are there versions of the phone that work only within WCDMA Band I 2100 and WCDMA Band VIII 900 but not with WCDMA Band V 850 and WCDMA Band II 1900? Or there is only one version of the phone and it works with all wcdma bands? Regards
@poquitaonda
It is either WCDMA Band I + II + VIII (900+1900+2100) or WCDMA Band I + II + V (850+1900+2100) dependent upon region of supply.
Happy to have helped forum with a Support Ratio = 42.5 -
Need some help with the Table Function Operator
I'm on OWB 10gR2 for Sun/Solaris 10 going against some 10gR2 DB's...
I've been searching up and down trying to figure out how to make OWB use a Table Function (TF) which will JOIN with another table; allowing a column of the joined table to be a parameter in to the TF. I can't seem to get it to work. I'm able to get this to work in regular SQL, though. Here's the setup:
-- Source Table:
DROP TABLE "ZZZ_ROOM_MASTER_EX";
CREATE TABLE "ZZZ_ROOM_MASTER_EX"
( "ID" NUMBER(8,0),
"ROOM_NUMBER" VARCHAR2(200),
"FEATURES" VARCHAR2(4000)
-- Example Data:
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (1,'Room 1',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (2,'Room 2',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (3,'Room 3','1,1;2,3;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (4,'Room 4','5,2;5,4;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (5,'Room 5',' ');
-- Destination Table:
DROP TABLE "ZZZ_ROOM_FEATURES_EX";
CREATE TABLE "ZZZ_ROOM_FEATURES_EX"
( "ROOM_NUMBER" VARCHAR2(200),
"FEATUREID" NUMBER(8,0),
"QUANTITY" NUMBER(8,0)
-- Types for output table:
CREATE OR REPLACE TYPE FK_Row_EX AS OBJECT
ID NUMBER(8,0),
QUANTITY NUMBER(8,0)
CREATE OR REPLACE TYPE FK_Table_EX AS TABLE OF FK_Row_EX;
-- Package Dec:
CREATE OR REPLACE
PACKAGE ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX;
END ZZZ_SANDBOX_EX;
-- Package Body:
CREATE OR REPLACE
PACKAGE BODY ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX
AS
RETURN_VALUE FK_Table_EX := FK_Table_EX();
i NUMBER(8,0) := 0;
BEGIN
-- TODO: Put some real code in here that will actually read the
-- input string, parse it out, and put data in to RETURN_VALUE
WHILE(i < 3) LOOP
RETURN_VALUE.EXTEND;
RETURN_VALUE(RETURN_VALUE.LAST) := FK_Row_EX(4, 5);
i := i + 1;
END LOOP;
RETURN RETURN_VALUE;
END UNFK;
END ZZZ_SANDBOX_EX;
I've got a source system built by lazy DBA's and app developers who decided to store foreign keys for many-to-many relationships as delimited structures in driving tables. I need to build a generic table function to parse this data and return it as an actual table. In my example code, I don't actually have the parsing part written yet (I need to see how many different formats the source system uses first) so I just threw in some stub code to generate a few rows of 4's and 5's to return.
I can get the data from my source table to my destination table using the following SQL statement:
-- from source table joined with table function
INSERT INTO ZZZ_ROOM_FEATURES_EX(
ROOM_NUMBER,
FEATUREID,
QUANTITY)
SELECT
ZZZ_ROOM_MASTER_EX.ROOM_NUMBER,
UNFK.ID,
UNFK.QUANTITY
FROM
ZZZ_ROOM_MASTER_EX,
TABLE(ZZZ_SANDBOX_EX.UNFK(ZZZ_ROOM_MASTER_EX.FEATURES)) UNFK
Now, the big question is--how do I do this from OWB? I've tried several different variations of my function and settings in OWB to see if I can build a single SELECT statement which joins a regular table with a table function--but none of them seem to work, I end up getting SQL generated that won't compile because it doesn't see the source table right:
INSERT
/*+ APPEND PARALLEL("ZZZ_ROOM_FEATURES_EX") */
INTO
"ZZZ_ROOM_FEATURES_EX"
("ROOM_NUMBER",
"FEATUREID",
"QUANTITY")
(SELECT
"ZZZ_ROOM_MASTER_EX"."ROOM_NUMBER" "ROOM_NUMBER",
"INGRP2"."ID" "ID_1",
"INGRP2"."QUANTITY" "QUANTITY"
FROM
(SELECT
"UNFK"."ID" "ID",
"UNFK"."QUANTITY" "QUANTITY"
FROM
TABLE ( "ZZZ_SANDBOX_EX"."UNFK2" ("ZZZ_ROOM_MASTER_EX"."FEATURES")) "UNFK") "INGRP2",
"ZZZ_ROOM_MASTER_EX" "ZZZ_ROOM_MASTER_EX"
As you can see, it's trying to create a sub-query in the FROM clause--causing it to just ask for "ZZZ_ROOM_MASTER_EX"."FEATURES" as an input--which isn't available because it's outside of the sub-query!
Is this some kind of bug with the code generator or am I doing something seriously wrong here? Any help will be greatly appreciated!Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer. -
I'm having some problems starting up a Power Mac G4 into target disk mode. I've done it before, a couple weeks ago, but now every time I try it instead starts up into open firmware mode. I can't figure out what's going on, any help would be greatly appreciated.
Welcome to the forum.
Firstly, let's check a few things. Have a look at APPLE'S KNOWLEDGE BASE on how to do it. If that's what you're doing then report back. -
Windows 8.1: Help with Fully Securing an Operating System
Hello all and thank you for visiting my post. Your read is greatly appreciated.
I am in need of knowing methods of securing Windows 8.1 Pro & Enterprise to allow the utmost secure OS to be the end result.
Security Covers:
Local Security Policies
GPOs
Networking
Filesystem
I am looking from a broad perspective, and to give this a little more specification, imagine I were an IT Department Administrator and had a single Windows 8.1 Professional & Enterprise OS to fully secure.
Obviously automation would be an extremely fantastic addition, so if you believe your security process can be completed via automation, do describe a viable method as to how you would automate the task.
By fully, I mean fully. Not using Smart Cards and what not, but using inexpensive methods to secure the OS using anti-viruses, applications, perhaps even IDS - I want to see how you and one
as a knowledgeable individual would accomplish such things. Even the most microscopic details from disabling something such as Toredo IPv4/6 to enabling UAC.
I apologize for the broadness, but I am not looking for any one-liner posts. I am looking for creative minds the field of cyber security to assist me here. Any information can help.You can use group policies to secure the systems, in addition use bit-locker options for HDD encryptions, use MBSA to anyalyze security bugs : http://www.microsoft.com/en-au/download/details.aspx?id=7558
Here is the overview of Win 8.1 security :
http://technet.microsoft.com/en-au/windows/security-and-control.aspx
You might also like this article :
http://www.infoworld.com/t/security/the-10-windows-group-policy-settings-you-need-get-right-231623
Let me know if you need anything specific.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Help with SlideShowPro FullScreen Mode
I have been knocking myself out on this problem for 6 weeks, posted on the SSP Forums, but still no solution.
I now have two test sites posted, they are identical except that one site has all the SSP components programmed to open in FullScreen mode when clicked in the center and the other is programmed to only toggle the display mode (play/pause) without any fullscreen capability. The non-FullScreen capable site works perfectly, but the FullScreen enabled site loses its mind (always in a different way) when returning from FullScreen mode. Even the FullScreen enabled site works perfectly until FullScreen is first activated - after that it is anyones guess what happens next?
Non-FullScreen Enabled Site (always works as expected):
http://www.scottbrackenphotography.com/index.html
FullScreen Enabled Site (never works as expected):
http://www.scottbrackenphotography.com/indexTest.html
Once FullScreen is activated, upon returning to site, sometimes some of the different menu buttons in the site no longer work, or they take you to the wrong section, and pretty much 100% of the time if you click on Subscribe, Prints, Info, or Contact one of the SSP movies will run in the background (and there are NO INSTANCES OF SSP ON ANY OF THOSE MOVIE FRAMES!).
The SSP Tech Support keeps telling me to use the halt(); method. They say my problem is that remnants of the SSP component are being left behind when returning from FullScreen mode in Flash and that the halt(); method flushes those remnants out. I have tried writing the AS3 code 10 different ways to call this halt(); method on an SSP instance, but just get various errors.
Has anyone ever used the halt() method? If so, do you have any code examples?
Thanks!quzsd,
Thank for the reply, but could you maybe post how you used the halt(); method in an actual function or handler so that I can see how you actually called it in the ActionScript? I am assuming that I have to attach it to a button? -
Help with transparency & blend modes?
Well, I'm making a book cover
The idea is that I have a background on top of which i put a label which will contain the name of the book but will "cut out" through the label to show the background.
I've done a sketch in Ideas, here it is
Now, the question is how would I do this in Illustrator, but with a actual object and a font instead of erasing out of a rectangle on an iPhone
Many thanks in advance!Jonas,
You may:
1) Create the Type (no need to outline) on top of the label,
2) Select both (and nothing more) and in the Tranparency palette flyout tick Make Opacity mask.
If the Type is black have both Clip and Invert Mask unticked (if it is white, tick Invert Mask, hardly relevant here). -
Need help with bitshift operation
please help me divide a number with 24 using bitshift operation
i know to multiply a number with 24
x = (x<<4) + (x<<3)
but how to divide it with 24???
thanks a lotthanxx Abuse, i'll try to understand the code right now :)
it's not for school exercise
only want to use bitshift for my 24x24 tile background
this one i use to get the shift operator
public static int[] getShiftOperation(int num) {
if (num % 2 != 0) throw new RuntimeException("num must be the power of two, 2,4,6,8,...");
int[] base = new int[1];
int i = 1;
while (Math.pow(2,i) < num) i++;
if (Math.pow(2,i) > num) {
int mod = num;
base[0] = --i;
do {
mod = mod-(int)Math.pow(2,base[base.length-1]);
i = shiftOp(mod);
if (i != 0) {
base = (int[]) Utility.expand(base,1);
base[base.length-1] = i;
} while (i != 0);
} else base[0] = i;
return base;
private static int shiftOp(int num) {
if (num == 0) return 0;
int i = 1;
while (Math.pow(2,i) < num) i++;
if (Math.pow(2,i) > num) i--;
return i;
}and to multiply it with num
public static int shiftMultiply(int num, int[] shift) {
int result = 0;
for (int i=0;i < shift.length;i++)
result += num<<shift;
return result;
thanxx -
WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection
Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PMI own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John -
Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays. -
I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay KumarHi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS
Maybe you are looking for
-
4.0 SUCKS! HOW DO I GET 3.8 BACK? No Yahoo toolbar or IE Favorites.
I upgraded to the Firefox 4.0 and now I find that it is not compatible with most of the add-on's and my Yahoo toolbar that I had before. In particular, I cannot access IE Favorites nor can i install the Yahoo tool bar. his application is confusing an
-
How much to cost for replace a hard drive and trackpad for MacBook Pro retina 15
I Am in Japan right now, and some how my laptop was broken. Is the price in Japan similar to United State?
-
Mail attachment in jpg file requires photo paper on eprint
Hello, I am using an HP Photosmart 7510,printer. I have just configured eprint and I tried by sending by eprint a mail with a jpg attachment. The printer requires me to put photo paper into the printer. The problem is that if the attachment is in jpg
-
Exposure vs. Levels: Differences in Practical Use
I would like to better understand the differences between the Exposure control in the Exposure Adjustment section and the White, Gray and Black Levels sliders in the Levels Adjustment section. For example, I am working on a Raw-format image that is s
-
Identity Management System Setup Error
In Global Settings tab when I try to set up identity management system for lotus notes by providing proper host name, user name and password I get following error on oc4j log file 07/03/28 14:22:05 org.omg.CORBA.INITIALIZE: can't instantiate default