How to find out which server is running on which port
hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanth
The best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation).
Similar Messages
-
How to find out sql server administrator account in sql server 2008 R2
how to find out sql server administrator account in sql server 2008 R2
adilthere is any way to find out actual administrator
because i forget that user i used to logon to server and installed sqlserver
adil
Hi adilahmed,
According to your description, you forgot the account which was used to install SQL Server. SQL Server service account information is stored in Windows Registry database. You can get this information from Services Console or SQL Server Configuration.
For example, to get account information from Services Console.
1. Go to Start > Run > Services.msc
2. Right Click on SQL Server Service, i.e. “SQL Server (InstanceName)” and go to properties
3. The account information is available under Log On tab.
Or you can get the information by using DMV and so on.
SELECT servicename, service_account FROM sys.dm_server_servicesGO
If you now log in SQL Server by using sysadmin account, you can check all login names in security and find the original account to login.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
How to find the SQL Server Instances running across the given activer directory domain?
How to find the SQL Server Instances running across the given activer directory domain?
I have though of OSQL -L , Microsoft Assessment and Planning ( MAP ) tool and SQLPing3 (SQLSecurity) might help me.
I would appreciate if there any other way of finding the SQL Servers / Instances running across the given active directory domain.
Sivaprasad S
http://sivasql.blogspot.com
Please click the Mark as Answer button if a post solves your problem!Dear ,
Very simple u find all instances through the customized sp which is get all details about inventory. Like i put the sp bellow. This is without any tool.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[DBStatus] Script Date: 08-01-2015 19:46:11 By Damodar Patle Sr. DBA Mumbai India ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[DBStatus]
AS
SELECT
SERVERPROPERTY('servername') AS ServerName,
ConnectionProperty('local_net_address') AS 'local_net_address',
ConnectionProperty('local_tcp_port') AS 'local_tcp_port',
CONVERT(VARCHAR(25), @@VERSION) as VERSIONSQL,
SERVERPROPERTY('ErrorLogFileName') AS ErrorLogFilePath,
database_id,
CONVERT(VARCHAR(25), DB.name) AS DBName,
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'status')) AS [Status],
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'Recovery')) AS [Recovery_Model],
create_date as DBCreate_Date, --physical_device_name,
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS DataFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS [Data MB],
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LogFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS [Log MB],
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS MDF_File_Location,
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LDF_File_Location,
user_access_desc
FROM sys.databases DB
ORDER BY dbName, [Log MB] DESC, NAME -
How to find out the last date & time on which a program has been run
Hi Experts,
Can anybody tell how to find out the last date on which a purticular program has been run.
Valuable answers will be rewarded.
Thanks & Regards,
Satish.Hi!
Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
I planned once to download it weekly, but it was not so important...
Regards
Tamá -
How to find out when dcpromo was run on a server?
Is there an event ID or something that gets logged that shows when dcpromo was run on a server? I am trying to figure out when a server was promoted to a domain controller.
Thanksmultiple ways to find out when DCPROMO was executed......
* Check the DCPROMO.LOG in C:\Windows\Debug
* Check the creation dates of the folder for the NTDS.DIT file and the SYSVOL
* Check the creation of the computer account, the NTDS Settings object (all in AD)
this should give you an idea of when DCPROMO was executed
Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)
Jorge de Almeida Pinto | MVP Identity & Access - Directory Services
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always evaluate/test yourself before using/implementing this!
* DISCLAIMER: http://jorgequestforknowledge.wordpress.com/disclaimer/
################# Jorge's Quest For Knowledge ###############
###### BLOG URL: http://JorgeQuestForKnowledge.wordpress.com/ #####
#### RSS Feed URL: http://jorgequestforknowledge.wordpress.com/feed/ ####
-------------------------------------------------------------------------------------------------------<>
"K_evin Zhu" wrote in message news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Jorge de Almeida Pinto [MVP-DS] | Principal Consultant | BLOG: http://jorgequestforknowledge.wordpress.com/ -
How to find out what server the outlook client is connected to/change it automatically
Hi,
I am performing a server migration from Exchange 2010 to Exchange 2010 (the previous installation was installed by an outsourced provider and is rubbish so I'm configuring it properly). On the of things the existing server lacks is a CAS array configured,
so I have built the new Exchange 2010 server, configured a new DB and CASArray. I have created a brand new mailbox for a new user and the user's outlook shows it is connected to casarray.domain.local, I have migrated my own mailbox but internally my outlook
shows it is connected to oldserver.domain.local (under the account settings when you go to change the settings for the account), this is on a domain joined internal desktop. But at home on my personal laptop non-domain joined, it has appeared to reflect the
new casarray.domain.local. The outlook client is 2007 in both situations.
When I run the following command, it shows my mailbox is indeed connected to the new exchange server, but this is not true in outlook
Get-LogonStatistics -Server "new-exch2010" | where {$_.clientname -eq "new-exch2010"}| ft username,servername,clientname
If I run the above command against the old server my name shows on that list as well. When I look at the connection status of my outlook it shows that it is connected to casarray for directory, but the old server for mail.
A couple of other things:
Mailflow is now going to the new exchange server from the gateway over port 25, the autodiscover record in the internal DNS is now also pointing to the new exchange server, outlook clients and users computers have been completely restarted but still don’t
seem to pick up the new settings, both the old server and new server functions as a multi-role exchange having the Hub, CAS and MBX roles.
Now that you have all that background info my question is two parts:
What is the correct powershell command I can run on the exchange server to ensure that all my outlook clients are connected to the new exchange server for all connection types (or identify those which are connected against the old server)?
How do I get the outlook clients to automatically pick up the casarray servername once their mailboxes have been migrated?
I am considering removing the CAS from the old server which may force outlook to find it’s new server but am unsure whether this will work or not, and I think I should migrate all the mailboxes into the new DB before I do this.
Other than that, I am out of ideas.
Appreciate, any help. Thanks
SteveI had already run the command Get-MailboxDatabase | FL Identity,RpcClientAccessServer
and it only identified the old database as being tied to the server name, the new database has the correct casarray and all mailboxes are in this new database. should I also set the old database to point to my casarray as the second command indicates? can't
do any harm right?
also, I have outlook 2007 and 2013 at home and both of them had automatically reconfigured
themselves to point to casarray, my problem is with the internal clients.
today I have also noticed in DNS there is a Zone which points to autodiscover.domain.co.uk
and in there it points to my old server.
a few things to note about the above:
1. the zone is pointing to the .co.uk domain not the .local - is this correct?
2. should that zone even be in our internal DNS, i hadn't noticed on previous implementation
of Exchange I have done
3. if i change the record within that zone to point to my new server, will this likely show
up the popup message shown in this link http://www.rackspace.com/apps/support/portal/1218 I havent yet got a certificate for the new exchange server (few more days) and i dont want users seeing any kind of untrusted unsecure connection box or it
will only lead to panic and flooding the helpdesk
many thanks
Steve -
How to find out the server listen port
Is it possible to programmatically find out what port numbers in the web server listening on for http as well as https requests? I know this information needs to be configured in the server's config. file. But is there a way to be able to get to it from a servlet (some java class running on the server for that matter) in a vendor independent manner?
Any input/help greatly appreciated.Thanks for the reply. Sorry I should have been clearer on this. I wanted to know if I can get that information from somewhere else (ServletCotext, ServletConfig, etc) other than the request. I have a need where I have to change the port number in case the scheme changes (http to https or vice versa) and I need to know what port number to change to. Hope this makes my question clear.
-
How to find out the service that consumes a given port?
If we want to check if a given port is open on a given host, we do
telnet hostname port-number
If this given port is open, that means a service is consuming this port. How to identify which
service is consuming this open port?
Thanks!Hi,
Please check the file /etc/services.
In this file you will find that which port is occupied by which services. This file contains all services details (OS+ SAP also).
Please refer to below doc for the details about the standard ports used by SAP applications.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4e515a43-0e01-0010-2da1-9bcc452c280b
With Regards,
Saurabh -
How to find out Forms Server version in pl/sql procedure
How can I get the version number and/or patchset of the Forms Server through which my pl/sql procedure has been called?
Thanks,
AttilaYou can't do this through PL/SQL. PL/SQL runs on the database server whereas Forms Server runs on the web server which are two different environments (even when they are installed on the same physical machine).
I don't know about Web Forms, but there may be a Forms built-in that can give you the information you require. You could then pass it as a parameter to the PL/SQL procedure.
Alternatively you could write a Java stored procedure to somehow pick up the information from the OS.
rgds, APC -
How to find out the PO line items for which no GRN has been done
Dear Friends,
I need a report which will show all the fully open PO items for which no GRN has been done.
In ME2N when I give the selection parameter "open goods receipt" then it shows all the line items with partially & fully open. But my requirement is to get a report of only fully open items.
Regards
Rutabhadra PandaHi Friends,
Thanks a lot for your reply.
But this is a report which projects the expected GRNs & does not depend whether partial or full.
Is there any other way out?
Can I download from the table directly.
Regards
Rutabhadra Panda -
How to find out the GR Numbers for which IR has not been done
Hi Sap Gurus,
Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
Thanks N Regards,
SiddharthaHi Siddarth,
Solution :
1) Go to SE16 - Table Name : EKBE (PO History)
2) Field - BUDAT (Posting Date)
3) Transaction event Type:
- 1 (Only GR's )
- 2 (Both GR and IR)
4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
In addition to MB5S, you can try this also... -
How to find out the RasterItem(embedded) links name?
How to find out the RasterItem(embedded) links name which appeared in Links menu(Window->Links) via scripting for illustrator cs3. Please advise me the possibilities.
Thanks for looking into this.Thanks for your support. From your code i got the filename(embedded) with pathname(if the embedded image in that location). If the embedded image not in that location at that time it throws error message. Is it possible to find out the name of the embedded image, if the corresponding image not in that location. Kindly advise me the possiblitities.
Thanks for looking into this. -
How to find out PR, PO GR's pending for morethan 30days
Hi Guru's,
How to find out the PR,PO,GR's , which are pending for more than 30days. Thanx in advanceThis can be achieved in the purchasing list displays.
For PRs you can use ME5A.
select the field change date (this has the creation date) from dynamic selections, enter the date that is 30 days ago, press F2 and select the icon for smaller than. Further enter Processing status N. Execute.
for open GRs you can check in ME2M (by material) and ME2L (by vendor)
Enter selection parameter WE101, enter delivery date (that is 30 days ago) press F2 and selec the icon for smaller than. Execute. -
Any good way to find out which process is running on which CPU, how long it
Hi All
any good way to find out which process is running on which CPU, how long it took, how many threads it has forked, which thread went to which CPU, etc. .
RPS
Message was edited by:
RajeshPSHi All
any good way to find out which process is running on
which CPU, how long it took, how many threads it has
forked, which thread went to which CPU, etc. .Because the scheduler moves threads from CPU to CPU all the time, that would be a lot of information to store. I don't know any easy way to gather it.
Under Solaris 10, you could write a dtrace script that noted every time one of the processes thread was enqueued or dequeued on a cpu and post-process that.
That's probably the best way.
Darren -
How to find out which query run how many times using ST03?
Hi experts,
I am trying to clean up all the junk queries in BWP. my questions is, How to find out that the particular query ran how my times in a year and by which user using ST03, How to do it step by step?
I don't like to use statistic reports for this. How to do it using ST03?
Please let me know. Thanks in advance.
Sharat.Hi,
Please find the below links which would help you solving you problem,
SAP BW performance tunning : Includes screen shots
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/68fbb490-0201-0010-8eb5-f7e0adaff5bd
SAP BW Query Performance Tuning with Aggregates:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
With Regards,
PCR
Maybe you are looking for
-
Here is my problem, I want to upgrade my macbook pro mid 2007 3.1 AA896ll/a to an Solid State Drive, a Crucial m4 256 gb, I want to know if the macbook will be able to handle it and how do I do the switch. also once I install the drive will I be able
-
Appalled by Verizon's lack of honesty and customer service
I am so frustrated with Verizon right now...I have been with Verizon for over 10 years. My phone stopped working, and was replaced through the insurance. I was past my 45 days in returning the phone, but spoke with SEVERAL representatives who told me
-
Does it take a couple of charches to reach full capacity??? Prof.
-
i am trying to get my icloud storage under 5g to avoid paying for storage.. will deleting my 6g of back up storage be a problem if i have a bck up that is more rescent at 1.7 g
-
Huge Problem When Create New Lightroom Catalog
When I created new Lightroom catalogs, I did not notice that it asks where to save it. So, it saved the catalogs in "Documents". Now it seems I have two copies of the following: - The Lrcat files appear in Documents and on my external drive in a