How to load 4x6 photo paper into a hp office jet # j6480 All-in-one?

how do i load 4x6 photo paper into a hp office jet # j6480 All-in-one?

Hi jdz198,
You will load the photo paper face-down on the right side of the paper tray. Here is a document to follow.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

Show me how to load 4x6 photo paper in my printer and to print a photo on it.

I have a HP Officejet 6500A Plus printer hooked up to a Windows 7 operating system

Hi,
To load photo paper you can follow the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02319525&cc=pl&dlc=en&lc=en&product=4083977&tmp...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to enlarge picture on my hp office jet 6600 all in one printer

how do i enlarge pictures from my hp office jet 6600 all in one printer

Hi,
Are you talking about copy, scan or print ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu. However on the test page for the fax the time and date are showing Jan-00-00 00:00AM. I do not know how to change the date and time. Please help. Thanks.
This question was solved.
View Solution.

Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to load 5x7 photo paper

im trying to figure out how to load photo paper into my printer its an HP. everytime i put the paper in its 5x7 it says that i need paper. it cant find or grab the paper to print on it . Please tell me how to do it correctly. THANKYOU

Hello rcollier,
What is the model or product number of your printer?
Thanks!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to load 5x7" photo paper so printer does not think tray is empty

I am using the HP app to try and print on photo paper 5x7" supplied with inks by HP for this printer. Printer takes photo papers at edge of tray but won't print as it detects no paper in it! Crazy!
I put the paper sideways, and then it did feel paper but printed across it, cutting off bottom as not correct shape. Looks like it is too small to be felt in tray

Hey , Welcome to the HP Support Forum. I see that you're having an issue with printing 5x7" photos with your HP Deskjet 2540 All-in-One Printer. I would like to help. Are you loading the paper as directed here?: (Source) One thing's that's not mentioned above that you might want to try is setting the paper width guides to makes sure the photo paper feeds accordingly. Let me know if this helps. Thank you for posting in the HP Support Forum. Have a great day!

What ate the best Cartridges for printing Photos in a office jet 5610 all in one?

I have a Officejet 5610 all in one and I am having trouble printing photos. I am using the Tricolor Cartridge and the Photo cartridge with new HP paper and the photos look terrible. What am I doing wrong?

Please provide some details of the problem - do you see banding, improper colors or ??? What program are you printing from? What operating system?
I would start by checking the print settings. Select "Best" for the print quality and select the proper photo paper type.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can I connect my Hp office jet J5780 All in one printer to my mini?

I just bought a mini and I cannot get connected to my printer, please help.

printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links, see Texas Mac Man list:
https://discussions.apple.com/message/21291967#21291967
iPad Print Applications supplied by printer manufactures -- usually free:
HP ePrint Home & Biz
    http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Photosmart+5515+ e-All-in-One+Printer+-+B111a&product=5063608&tmp_qt=eprint&cc=us&dlc=en&lc=en&su bmit
Software for your computer's printer:
Mac and Windows
FingerPrint
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
AirPrintHacktivator
    http://osxdaily.com/2010/12/01/make-any-printer-airprint-compatible/
Makes any printer AirPrint® compatible so you can print from an iPad® or iPhone®. Reportedly works for any router.
http://www.netgear.com/landing/genie/default.aspx

Deskjet 6988dt, how to use photo/envelope slot for printing 4x6 photo paper?

Windows 7 Home Premium 64-bit OS. Printer has the extra250 sheet paper tray. Upper and lower tray work fine. I can of course load photo paper in upper tray and print photos from there, but I was trying to load just one sheet of photo paper in the little slot since I don't want to have photo paper loaded all the time. Since I have to use the generic Windows driver for this printer as HP doesn't have a driver update for this printer and Windows 7, the only selections I'm seeing in printer properties is "automatic, upper, lower". I've tried all three of those settings and none take the paper from the little slot where I'm manually feeding the 4x6 photo paper. What am I doing wrong? Could it be that this feature just isn't enabled with the generic Windows driver?
The reference/instruction documentation that came with this printer is very sparse. I can't find any instruction on how to use the photo/evelope slot. In fact I'd say overall the documentation is very poor.
I just checked the HP site, still no Windows 7 64-bit driver available.
Thanks for any help or ideas.

Found a .pdf document on line for the Desjet 6980 series printers. Much more comprehensive than what came with the printer.
http://h10032.www1.hp.com/ctg/Manual/c00591373.pdf
Follow these steps to use the photo/envelope feeder to print a single photo:
1. Insert the photo paper into the photo/envelope feeder with the side to be printed on
facing down.
2. Gently push the photo paper into the photo/envelope feeder as far as it will
comfortably go.
3. Slide the photo/envelope feeder forward as far as it will go.
4. Print the photo.
Problem was, although I was inserting the 4x6 photo paper into the feeder, I wasn't pushing the little plastic slide forward.

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

I have an I pad, hooked to a wireless printer , I need to print my bank statements. I know you have to snapshot it first, but it is printing on 4x6 photo paper is all. I need it to print on regular 8x10 paper so it will print the whole page and

How can I print off my I pad for bank statements on reg paper not 4x6 photo paper?

How nice of you to wait three whole minutes for an answer.
I don't know what you mean by "I have to snapshot it first". Can you explain what you mean? If you're making a screenshot and printing from your photo application, you're going about things in a very odd way. You should be using the Share - Print icon from whatever app (Safari?) your bank statement is in.
Matt

How to load BeginningBalance and movements into HFM via FDM from ERPI

I have a file generated by ERPI with the columns of |AMOUNT|BEGIN_BALANCE_DR|BEGIN_BALANCE_CR|PERIOD_NET_DR|PERIOD_NET_CR|
among many other columns.
How can load them via FDM into the Custom1 dimension in HFM, which contains BeginningBalance, Additions, Disposals, etc.
So basically I will have a trial balance, which I can compare with GL and OBI.

Hello
You can use the IDOC SOPGEN01 for that purpose.
Please check transaction WE60 for IDOC documentation and there are many old threads with information about this IDOC.
BR
Caetano

Have a photosmart 7280 and can't get it to feed and print 4x6 photo paper

Can't get my 7280 printer to move the 4X6 photo paper tray and print

Hi there toneymac55,
This article should get you up and running. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to load the google map into an empty movieclip

how to load the google map into an empty movieclip ? Thank you

if you're using as3, check the google maps api for flash. if you're using as2, check the google maps api for javascript and use the externalinterface class in flash.

How to load data from Quikbooks into PeopleSoft General Ledger module ?

Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?

Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan

How to load 4x6 photo paper into a hp office jet # j6480 All-in-one​?

Similar Messages

Maybe you are looking for

How to load 4x6 photo paper into a hp office jet # j6480 All-in-one?