How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '99991231'.
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu <= '99991231'.
Thanks,
Vinay
Thanks,
Vinay

Similar Messages

How to select columns from internal table using 'GUI_DOWNLOAD' ?

Hi,
i am running a report & the fields for output is saved in an internal table which has as many as 10 fields. But I want to select only a few fields for output. There is a option COL_SELECT in function 'GUI_DOWNLOAD'. How to use it. If possible with example.

Hai VijayKumar
Try with the following code
tables : mara.
data : begin of it_mara occurs 0,
 matnr like mara-matnr,
 mbrsh like mara-mbrsh,
 mtart like mara-mtart,
 meins like mara-meins,
 end of it_mara.
parameters : P_mtart like mara-mtart default 'ROH'.
start-of-selection.
perform select_data.
perform download_data.
*& Form select_data
 text
--> p1 text
<-- p2 text
FORM select_data .
select
 matnr
 mbrsh
 mtart
 meins
 from mara into table it_mara
 where mtart = p_mtart.
ENDFORM. " select_data
*& Form download_data
 text
--> p1 text
<-- p2 text
FORM download_data .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 FILENAME = 'c:\down.txt'
 FILETYPE = 'ASC'
 COL_SELECT = 'X'
 COL_SELECT_MASK = 'X XX'
TABLES
 DATA_TAB = it_mara.
IF SY-SUBRC = 0.
 SORT IT_MARA BY MATNR.
ENDIF.
ENDFORM. " download_data
Thanks & Regards
Sreenivasulu P

How to read data/fields of the pdf form

Hi,
i want to orchestrate a process where input is interactive forma and output is xml data.
i mean i want to read data/fields of the pdf form.
Which activity do i use on workbench.
Regards
Sunil

Dieter,
I am talking about 3rd senario, where we create one process on workbench, and pass filled pdf as input and then output of process is xml file.
What is the process name here (Like renderPDF process) which extract data from pdf.
regards
Sunil

How to select multiple row of table using check box?

hi,
 i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view...
 my problem is if i select only one row , i can use onlead select property of table..but when i select multiple rows through check box how should i read contents of table....?
Plz solve it.
Thanks,
Saurin Shah

Hello Saurin,
You are right using LeadSelection you can select only 1 row at a time. You will have to make use of Selection for achieving this. First you will have to change the selection mode of the table to multiple & also change the selection property for the related context to 0..n . Please find a code extract which might help you. (However this facility is only available from SP 14.) The main part is using the set_selected method of if_wd_context_node.
data: node_zcourse_details type ref to if_wd_context_node,
 node_course_assign type ref to if_wd_context_node,
 elem_course_assign type ref to if_wd_context_element,
 stru_course_assign type if_v_details=>element_course_assign ,
 item_popin_selected like stru_course_assign-popin_selected.
" navigate from <CONTEXT> to <ZCOURSE_DETAILS> via lead selection
node_zcourse_details = wd_context->get_child_node( name = if_v_details=>wdctx_zcourse_details ).
" navigate from <ZCOURSE_DETAILS> to <COURSE_ASSIGN> via lead selection
node_course_assign = node_zcourse_details->get_child_node( name = if_v_details=>wdctx_course_assign ).
" @TODO handle not set lead selection
if ( node_course_assign is initial ).
exit.
endif.
data elem_set type wdr_context_element_set.
field-symbols <wa_elem> like line of elem_set.
elem_set = node_course_assign->get_elements( ).
loop at elem_set assigning <wa_elem>.
 <wa_elem>->set_selected( TRUE OR FALSE ). " Supply either TRUE/FALSE in here
endloop.

How to generate report from two tables using DAO design pattern?

Hi,
Iam using struts with DAO pattern for my application. According to DAO design im creating model class for each table in my database with getter,setter methods. i have no problem when im generating report from one table. but if have i have to join two tables whatis the better way for doing that? is it good practise to create a new model contains properties from both the tables?
Please help me
Thanks in Advance
Rajesh

Dear Rajesh,
As per the pattern you are creating equivalent java objects for every database table under consideration in which each db field will become a private attribute and public getter and setter methods.
If you have to display data from one table the above approach is sufficient enough.
But in case your database is normalised ..lets take an example of Bank having Branch and Accounts tables. We dont need to repeat the whole information of the branch for every account in that branch. so we prefer to have a branch id in that table....this approach lot of insertion/deletion/updatation anomlies that may exists with the database...
now lets come back to our topic....we shall create two java objects 1) Branch 2) Account.....
When ever u just need to display simple report u can do it staright forward,,,,,now if u want to display branch information along with the account information....the two objects just created are not sufficient
So i suggest u the following approaches
1) Create an attribute of type Branch in the Accounts Object......
This shall serve the purpose of displaying the Btranch information
2) Create a collection object of type ( Vector or ArrayList) which can have objects of Account in the Branch Object,,,
Now its upto u how shall u fill up the objects with appropriate sql queries.
The method that i mentioned is followed by Oracle Toplink and Hibernate ....which provide Object to relation mapping layers.
Any queries ...revert back to me...
Mahesh

How to read records from Relationship table using ABAP API's

Hi All,
I need to retrieve the records from Relationship table. In Java API's I came to know there is an option to retrieve this. I could not find anything in ABAP API's. Is there any option in ABAP API's to do this.
Please Suggest.
Thank You,
Gajendra.

Hi Gajendra,
You can mainly read records from MDM (in a DDIC structure) using ABAP API's using the following function modules/methods:
1. RETRIEVE: This is used to generically retrieve records from tables. Attributes and Values can also be retrieved.
2. RETRIEVE SIMPLE: Retrieve records from MDM in a simple way.( simple data types).
3. RETRIEVE CHECKOUT: Retrieves all checked out ID's.
4. RETRIEVE ATTRIBUTES: Retrieves attribute(s) from a Taxanomy table.
You will find all these methods in the following interface
Interface : IF_MDM_CORE_SERVICES
Hope it helps.
*Please reward points if found useful.
Thanks and Regards
Nitin Jain

Find matching records from two tables, useing three key fields, then replace two fields in table1 from table2

I have two tables - table1 and table2 - that have the exact same schema. There are three fields that can be used to compare the data of the two tables, field1, field2, and field3. When there are matching rows in the two tables (table1.field1/2/3 = table2.field1/2/3)
I want to replace table1.field4 with table2.field4 and replace table1.field5 with table2.field5.
I have worked with the query but have come up with goobly goop. I would appreciate any help. Thanks.

If your field1, field2, and field3 combinations in these tables are unique, you
can do a join on them.
Select t1.field4, t2.field4 , t1.field5, t2.field5
from table1 t1 inner join table2 t2 on t1.field1 =t2.field1 and t1.field2=t2.field2 AND t1.field3=t2.field3
--You can update your table1 with following code:
Merge table1 t1
using table2 t2 on
on t1.field1 =t2.field1 and t1.field2=t2.field2 AND t3.field3=t2.field3
When matched then
Update Set
t1.field4= t2.field4
,t1.field5 = t2.field5 ;

How to validate date fields in the flash form

i want to validate the date fields to make sure the values
are not greater than today's date and from-date is less than or
equal to to-date in the flash form. Does the actionscript have a CF
DateDiff function for the validatation?
Thanks

I finally (after much reading up on actionscript) figured out
my problem with date validation...which was similar to yours...
I posted the solution I found for my AS date validation issue
here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=22&threadid=1232361
I hope it helps!!!

How to import order from Interface table using Api Order Import

Hi All
I am using oracle EBus R12.
I was working in Data migration in Order management.
I have manually entered data in Interface table ie (oe_header_iface_all) and (oe_lines_iface_all)
And i have given the order_source_id as 2 and order_source as COPY.
And after that i ran the concurrent program with parameter as COPY but the concurrent program does'nt picks the order in the interface.
Can any one please tell the steps in OM.
Thanks & Regards
Srikkanth.M

Hi;
please check:
http://sureshvaishya.blogspot.com/2009/04/order-import-using-api.html
Also i suggest see:
http://irep.oracle.com/index.html
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
Technical Uses of Customer Interface and TCA-API [ID 269121.1]
http://www.google.com.tr/#hl=tr&source=hp&q=Api+Order+Import+&oq=Api+Order+Import+&aq=f&aqi=&aql=&gs_sm=e&gs_upl=469l469l0l1l1l0l0l0l0l0l0ll0&fp=87c57485fd170fd2&biw=1259&bih=793
Regard
Helios

How to select data missing in the table?


I have a list of strings as follows (not in the table):
'aaaaa'
'bbbbb'
'ccccc'
In the table T1 I have a VARCHAR column x. The data under x are as follows
'aaaaa'
'ccccc'
I want to formulate a query such that it will bring 'bbbbb' since 'bbbbb' is not in the table. Please help!
Thanks.



We get asked this question on a reasonably regular basis.. Apparently people think it's perfectly normal and acceptable to ask a data repository for all the data it doesnt contain. We normally have a conversation that runs:
Tech "So, you want to see all data in the database, that is not in the database?"
User "Yes"
Tech "How do you propose that a database gives you all the information it doesnt have"
User "Oh. Now you put it that way.."
Actually I wish someone would hurry up and invent a data repository that does this, that way if I suddenly took a liking to The Beatles, but didnt have any of their songs in my collection, I could ask the data repository for all the Beatles songs I didnt have and.. bam! I'd have all the Beatles songs! cool
Seriously.. youre asking us to tell you how to make an oracle db tell you what information it doesnt have, but youre refusing to supply a block of data for it to compare against (i.e. so it can know what "Everything" is, in the phrase "Everything it doesn't have".
Do you really see it as possible?
Edited by: charred on Oct 22, 2008 9:45 AM

Get selected elements from a table

Hi all,
I have a requirement like i m enhancing standard component in that i have added one button on click of that i want fetch the selected line item from the table ( which is a normal table). selection mode is auto.
i tried with the following code.
DATA:lr_element TYPE REF TO if_wd_context_element,
lv_index TYPE i.
*--Get selected element
lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
****Here itself its throughing dump because lr_element is initial***************
*--get selected element index.
lv_index = lr_element->get_index( ).
can any one help me what is the wrong.. else suggest me how to get the selected elements from a table....
Thanks in advance.

*--Get selected element
lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
if lr_element is bound.
lv_index = lr_element->get_index( ).
endif.
Instead you can directly read the node if that row is a lead selected one.
lo_node = wd_context->get_child_node( name = 'EMP' ). "Emp is node name
lo_ele = lo_node->get_lead_selection( ).
or
lv_index = lo_node->get_lead_selection_index( ).
where is the above code written..is it written in OnLeadSelect event of the TABLE..
can any one help me what is the wrong.. else suggest me how to get the selected elements from a table....
As the selection mode is Auto there is no multiple selection..hence try to use the lead selection only.
Edited by: Lekha on Jan 3, 2012 6:47 PM

Multi select date field

Hi,
Is there any idea how to combine multi select DATE field in the check-in screen?
Thanks, eran.

Dates are stored using a DATE field in the database in a database date format. As such, multiple values can not be stored in the same field, only single values.
What's the use case?

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

How to select data from cluster table

hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
mani

Hi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards.

How can I select columns from a table EMP, using Select statement?.

Hi Friends,
How can I select columns from a table EMP?.
I want to select columns of EMP table, using select statement.
Please reply me urgently.
Shahzad

Something like this:
scott@DBA> select empno,ename,job from emp;
     EMPNO ENAME      JOB
      7369 SMITH      CLERK
      7499 ALLEN      SALESMAN
      7521 WARD       SALESMAN
      7566 JONES      MANAGER
      7654 MARTIN     SALESMAN
      7698 BLAKE      MANAGER
      7782 CLARK      MANAGER
      7788 SCOTT      ANALYST
      7839 KING       PRESIDENT
      7844 TURNER     SALESMAN
      7876 ADAMS      CLERK
      7900 JAMES      CLERK
      7902 FORD       ANALYST
      7934 MILLER     CLERK
14 rows selected.Check the documentation:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#sthref9697
Message was edited by:
Delfino Nunez

How to select data from a table using a date field in the where condition?

Similar Messages

Maybe you are looking for