How to test ABAP mapping used in a Integration Process node

Hi,
anyone can suggest me how to debug an ABAP mapping used into a transformation node belonging to an Integration Process ?
Thanks.
Francesco

Hi, Francesco.
I've debugged ABAP Mapping with SXI_MAPPING_TEST transaction.
If you have creted a scenario including your ABAP Mapping, you only hace to put the correct sender/sender interface and receiver/receiver interface. You have to put some XML document as an input.
I wrote in my code the Break-point instruction an debugged the process without problems.
regards,
Francisco

Similar Messages

  • How to test ABAP Mapping

    Hi,
    In the Interface Mapping there is an option to test the
    map. But it is not for the ABAP Mapping.
    How can we test ABAP Mapping ?
    rgds,
    RM

    Hi Ruby
    What kind of scenario are you working on, IDOC to file, file to IDoc or what.
    Depending on the scenario you have created, enter all the details such as Sender Service, Receiver Service etc in the transaction SXI_MAPPING_TEST (in your XI box).
    The next step is for you to enter your source XML file, if it is a file to IDoc scenario enter your source xml file. If it is a IDOC to file scenario, then enter the XML payload.
    And once you execute it you will be able to test your mapping and see if it successful or not.
    cheers
    Sameer

  • How to get ABAP mapping option in Interface Mapping

    Hi
    experts
    How to get ABAP mapping option in Interface Mapping . i need to do abap mapping . i didnt find the option
    plz help me

    Hi,
    If u2018ABAP-classu2019 and u2018XSL(ABAP ENGINE)u2019 does not appear under the u2018Mapping Program Typeu2019 in Interface Mapping, one has to make an additional entry in the Exchange Profile. 
    Only a user with the J2EE security role (administrator) can make the following settings in the Exchange Profile.
    It is achieved in the following manner:
    1) Open http://<host>:<port>/exchangeProfile/index.html
    2)Choose IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
    Add: R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
    To check whether the data has been successfully read from the exchange    profile:
    1- Open http://<host>:<port>/rep/support/admin/index.html
    2- Choose Administration of Properties -> All Properties
    3- If the value associated to parameter com.sap.aii.repository.mapping.additionaltypes is not visible, press REFRESH button
    After doing above check in IR, if still don't find the option for ABAP mapping then refresh the cache.
    Award points if useful.

  • Test ABAP Mapping

    I have completed an ABAP mapping scenario (first time).  I am not sure how to test the ABAP mapping.  Does anyone have a detailed document on this?
    Thanks
    Skip Ford

    Hi,
    here is a blog about this topic:
    /people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
    Regards
    Patrick

  • How web dynpro abap is used for snc

    Hi folks,
               I am new to web dynpro abap.Some one told we can upgrade snc from lower version to higher version but i dont have any knowledge on snc.For upgrading snc what we must have 2 know. How web dynpro abap is used for upgrading snc.Pls provide any links related to web dynpro abap with snc.
    Thanks in advance

    Hello Ravidanda,
    I have found a link that provides some information on how Web Dynpro ABAP is used in SAP SNC in the SAP Help. Here you go:
    http://help.sap.com/saphelp_snc70/helpdata/EN/46/7256ce7fde01dde10000000a1553f7/frameset.htm
    I hope this will help you.

  • About how to build dynamic maps using jdeveloper 10g and mapviewer

    i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
    D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
    Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
    Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
    Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
    Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
    Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
    Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
    Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
    Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
    Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
    Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
    Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
    Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
    Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
    Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
    can you help?
    greetings

    I found a lot of information in document 133682.1 on metalink.
    step by step example how to deploy a JSP business component application.

  • How to test a plug_in without Adobe Reader Integration Key?

    I havge a project to create a plug_in for acrobat reader with Adobe Acrobat 8.1 SDK. I also apply for the Adobe Reader Integration Key, but I have not it by now. But deadline of the project is coming, is there any one who can tell me how to test the plug_in without Adobe Reader Integration Key?
    I also have another question, does the plug_in I make with Adobe Acrobat 8.1 SDK can be compatible for all the version of Acrobat reader, such as 7.0, 8.0 and so on? Thank you.

    You test the plug-in, as well you can, using Acrobat. You also build
    it using the preprocessor options to build a Reader plug-in, so you
    don't accidentally use an API not in Reader.
    If you are saying, is there w way around the Integration key for
    testing in Reader, the answer is no.
    Different Reader keys and tools are needed for each version of Reader.
    You will probably not get a key for an old version of Reader.
    Aandi Inston

  • How to debug ABAP mapping

    Hello
    I've built a ABAP mapping based on How To convert an IDoc-XML structure to a flat file and vice versa in XI 3.0, however it runs into exeception when I tested it in SXI_MAPPING_TEST with error;
    - <cls:CX_SY_NO_HANDLER id="o265">
    - <CX_ROOT>
      <TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
      <PREVIOUS href="#o266" />
      <KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
      <IS_RESUMABLE />
    - <INTERNAL_SOURCE_POS>
      <PROGID>217</PROGID>
      <CONTID>5192</CONTID>
      </INTERNAL_SOURCE_POS>
      </CX_ROOT>
      <CX_NO_CHECK />
    - <CX_SY_NO_HANDLER>
      <CLASSNAME>CX_SY_REF_IS_INITIAL</CLASSNAME>
      </CX_SY_NO_HANDLER>
      </cls:CX_SY_NO_HANDLER>
    I want to debug into the mapping class, someone said jsut set break point in the mapping class and run sxi_mapping_test, then I would be able to debug. However this doesn't work, the execution doesnot stop at the break point (I set session break point, not external break point). Somebody can help?
    Thanks
    Eric

    The trace I got is like:
      <?xml version="1.0" encoding="iso-8859-1" ?>
    - <Top>
      <First>BeginTrace</First>
      <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
      <Trace level="2" type="T">......attachment XI_Context not found</Trace>
      <Trace level="3" type="T">Mapping is determined</Trace>
      <Trace level="1" type="T">Interface Mapping http://mynamespace/xi OM_Order_to_Simple</Trace>
      <Trace level="3" type="T">Object ID of Interface Mapping F1B943B7E3EB382FB1334066F113E0E6</Trace>
      <Trace level="3" type="T">Version ID of Interface Mapping EAA847208A4B11DD96D8F1C80AD60A0B</Trace>
      <Trace level="3" type="T">Mapping Steps 1 R3_ABAP Z_ABAP_MAPPING_IDOC_TO_FLAT</Trace>
      <Trace level="3" type="T">MTOM Attachments are Transferred to the Payload</Trace>
      </Top>

  • Testing ABAP mapping

    Hi,
            I have created one ABAP mapping class with the method IF_MAPPING~EXECUTE.I tried to test the mapping program in a report by passing  the source(XML document as a string).The call to the mapping method is done as follows:
    CALL METHOD CLASS1=>IF_MAPPING~EXECUTE
         EXPORTING
              source = sxml
            IMPORTING
               result = sxml1.
    When I try to activate the above call, I get an error message which says that You can only use class=>method  with static methods.This is happening in SAP WAS6.20.I understand that ABAP mapping can be tested in dynamic calls only in XI.
             So the only option left is to test the ABAP mapping in Integration repository Design -Interface mapping.When I include ABAP mapping class  in the interface mapping and run the whole scenario,I get error message in SXMB_MONI.
    Is there an easy way out to test the ABAP mapping than including it in the Interface mapping?If you have some ideas,please inform.
    Thanks in advance,
    S.Banukumar

    Hi Chris,
              Thanks a lot.I have corrected the name space as ns instead of ns0.I have  done the Design and Directory setting as suggested by you.Now I am getting the following error when I try to test my scenario in
    SXI_MAPPING_TEST.
      <?xml version="1.0" encoding="utf-8" ?>
    - <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
    - <asx:values>
      <ERROR href="#o97" />
      </asx:values>
    - <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
    - <cls:CX_XMS_SYSERR_MAPPING id="o97">
    - <CX_ROOT>
      <TEXTID>579DFEE1FC5AF24F9C83617A696DC539</TEXTID>
      <PREVIOUS />
      <KERNEL_ERRID />
    - <INTERNAL_SOURCE_POS>
      <PROGID>160</PROGID>
      <CONTID>650</CONTID>
      </INTERNAL_SOURCE_POS>
      </CX_ROOT>
      <CX_STATIC_CHECK />
    - <CX_XMS_SYSTEM_ERROR>
      <ID>APPLICATION_PROGRAM_ERROR</ID>
      <P1>$TMP.BOOKINGTOMSG</P1>
      <P2>R3_ABAP</P2>
      <P3>UNCAUGHT_EXCEPTION</P3>
      <P4 />
      <INFO />
      <CATEGORY />
    What could be possible reason for the exception?Do I need to give the name space for the ABAP mapping name when I include it in the Interface mapping?
    Thanks,
    S.Banukumar

  • How to test credential Mapping

    I have used the default adapter provided by the BEA n also made some services n
    events working on it sucessfully, and also made a mapping between the remote user
    n the WLS user in the WLI console.wat i want to know is how do i test the mapping
    that i have established.
    could u plz forward me the way to test this credential mapping
    thanking u in anticipation
    kirtan

    Hi Ruby
    What kind of scenario are you working on, IDOC to file, file to IDoc or what.
    Depending on the scenario you have created, enter all the details such as Sender Service, Receiver Service etc in the transaction SXI_MAPPING_TEST (in your XI box).
    The next step is for you to enter your source XML file, if it is a file to IDoc scenario enter your source xml file. If it is a IDOC to file scenario, then enter the XML payload.
    And once you execute it you will be able to test your mapping and see if it successful or not.
    cheers
    Sameer

  • How to implement wafer mapping using LabVIEW?

    Hello LabVIEW Masters!
    I am having an incoming project which includes controlling and gathering information from a PROBER. One of the difficulties I am having now is how to implement a WAFER MAP using LabVIEW. According to my customer requirements, the wafer element ranges from 6k to 23k. I guess doing all the element (one die = one led ctl/indicator) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have better idea on how to this?
    Please, I badly need your help.. 
    Thanks and Regards,
    Dennis DG
    Solved!
    Go to Solution.

    Hi Dennis,
    Is it okay if you send to me the working VI also?
    No, it's not ok. I made that program for my customer...
    As I am not too familiar in using intensity graph.
    That's no reason to hand over programs for free...
    My customer also request me that if the cursor hover on the wafer map, he wants the x,y corrdinates to be displayed.
    I also have such a feature. Did you notice the little yellow cursor near the center of the wafer? One could easily change that to use a MouseMove event instead...
    He also wants to select some elements in the wafer map and come up with the coordinate values to do some testing.
    That's related to the cursor thing...
    Some points:
    - You have a customer that pays you. Why should I offer work for free?
    - You can send me contact dates of your customer, I will make him an offer...
    - When you take an job to provide software you should be able to code the software...
    - The VI(s) are now some years old. I didn't code so well back those days and don't want to hand out those VIs as they are right now.
    - I included some "license management" deep inside that program, I would have to remove this and spend time on testing afterwards...
    - The VIs are based on the PROBER output format used by the customer. All the file handling has to be changed for/by you...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • ** How to debug ABAP Mapping at run time?

    Hi Friends,
    We have created one class using the interface IF_MAPPING and the method EXCUTE. Inside the class we have written coding. We refer this class in the interface mapping as mapping program. But, while execute the scenario, how do I debug my class ? (If it is proxy, we will mention the user name in XI adpater CC, refer the same user in ABAP external debuggine, but in the abap mapping class how do i refer..?
    Kindly help me friends.
    Kind Regards,
    Jeg P.

    Hi,
    maybe you could do it like described in this thread:
    Error when using ABAP mapping
    Regards
    Patrick

  • Help : How to test interface mapping in n:1 scenario

    I have a scenario two message interfaces==> one message interface.
    Then I new one interface mapping, and choose two source interfaces, one target interface. Also filled the mapping program.
    But when switch to the test tab, there is no display about the source and target message.
    How to do the test in this kind of scenario?
    Thanks a lot!
    Edited by: kiki qin on Oct 28, 2008 2:24 PM

    Hi
    First check in Message mapping first if you have one.
    Secondly when you select source or target message while developing message mapping did u get message like No objects found or something.
    It should show either error or source message when you test interface mapping in any case.
    Thanks
    Gaurav

  • How to enable ABAP Mapping Program in Integration Builder

    i have changed ABAP mapping Program in my DEV. Now i want teransport it to INT server.
    After releasing it in DEv, it should go through request number.
    but to enable the same mapping in integration builder i think we need to some thing in ADMInistration of integration builder.
    plz  tell me what to do.
    regards
    sreeni

    Hi kancham sreenivasulu ,
    These web-sites may help u solving u'r problem:
    How 2 connect non SAP RFC-Programs with XI
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0a8949b-098d-2910-2b8e-b5e9b7daeb26
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/content.htm
    http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf
    http://www.erpgenie.com/netweaver/xi/XI%20Service%20Packs%20Described.doc
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/704357d9-ce6e-2910-f085-bb1a238b6330
    cheers!
    gyanaraj
    *****Pls reward points if u find this useful

  • Looking for How To Guide ABAP Mapping

    Hi folks!
    I'm looking for a good how-to guide for abap mapping.Do you know any resource to look for?
    thanx in advance.
    Regards,
    Marc

    >
    Marc Eckhardt wrote:
    > Hi folks!
    > I'm looking for a good how-to guide for abap mapping.Do you know any resource to look for?
    > thanx in advance.
    > Regards,
    > Marc
    Resource is SDN Search option
    ABAP mapping
    regards,
    Abhishek.

Maybe you are looking for