Http to Abap Proxy communication with multiple queues generation in Recevr

Dear SDNs,
I need some help in the following scenario, appreciate your suggestions and help .
I am receiving the messages from sender to PI on http posting, from PI I am sending the message to SAP system using receiver xi communication channel ( receiver is abap proxy).
Sender will send the messages in QOS=EOIO, QUEueID=XXXt_100 etc parameters, when large volumes cases, it is getting delayed to process it using a single queue.
We are thinking to dynamically generate multiple queues in PI and send the same queue ids to receiver SAP system to process all the messages quickly in SAP System also.
Help /Clarifications needed:
1. XI receiver communication channel in pi does not provide any options to generate dynamic queue id based on payload content (using dynamic configuration) and sent it to SAP.
2. Module Tab in receiver communication channel also got disabled to add custom adapter modules, can we add custome adapter module on xi receiver channel to generate dynamic queue id ?
Really appreciate your immediate help and suggestions.
Thanks.
Suraj.

Dear Praveen,
Thanks lot for the immediate reply, we need to use EOIO, as the messages need to be processed in the same order we send and receive, there is no flexibility in QOS=EOIO, Appreciate if there is any other thoughts?
Thanks In Advance.
Suraj.

Similar Messages

HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

File to ABAP Proxy (problem with inbound queues in R3)

Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup

Steps in BW for intigration with PI system through ABAP proxy communication.

Hello Experts,
Need your help.
We need to extract data from PI system through ABAP proxy communication. Kindly suggest the steps need to be perform on BW side.(from data source creation to setting up the delta queue )
Thanks,
Arpan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

What are the pre-requisite for ABAP Proxy communication?

What are the pre-requisite for ABAP Proxy communication?

hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy

Sync HTTP to ABAP proxy

Hi:
I am looking for a Sync HTTP to ABAP proxy scenario screenshots.
Can someone help?
Thnx

HI,
See the below links
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Chilla

System Setup For ABAP Proxy Communication

Hi All,
I would like to know the basic configuration required in both XI and the connected SAP system (running on WebAS 6.40), for using ABAP Proxy communication (i.e., the steps that are required to be carried out before designing the Message Interfaces in IR and using SPROXY in the SAP system).
Thanks and Regards,
Bharath

Hi Bharatam
Prior to designing and configuring you need to do the following steps in SAP System where proxy will be generated..
1. Go for Tcode SXMB_ADM>Configuration>Integration Engine Configuration.
2.Click on Specific Configuration tab..
3.Category-- RUNTIMEparameter ENGINE_TYPE Current value LOC.
4.Category -- RUNTIME parameter IS_URL Current Value provide intergration server url.
save..
Note:Role of Business system Application System
SM59:
1.Create RFC Destination type H..
provide hostname (xi server) and port
Hope it helps you..
If you have any conecrn you can call me on my mobile..
Thanks
N.Prasad Babu
iGATE Global Solutions Hyderabad : 098490 65377

Error in proxy communication with BI (special characters in fieldnames)

Hi experts,
We are on our way to create some interfaces between PI 7.1 and BI 7.0.
These interfaces will communicate each system by means of ABAP proxies.
In BI side, in order to operate with the most up-to-date information,
we are using APD (Analysis Process Designer). It consists of a query
execution that at last inserts data into a DSO. This DSO is a table the
system creates, its fields are named with the prefix /bic/ and that is
the problem. BI team tried not to use it but with no success, this
prefix seems to be mandatory when working this way. Currently, RFC
communication is used, that is Outbound RFCs come along with DSO tables
and thus, data acquisition and assigning is done inmediately. Problem
is that we want to move to proxies without losing this benefit. That is
the clue.
So, back again in PI, once we try to create all the necessary stuff for
ABAP proxies, the system prevents us from creating the Data Type for
fieldnames starting with '/' so we cannot create the Service Interface
and so the proxy.
Error message looks like:
Value "/" is not allowed for the attribute "name" of type "NCName" in
element
Besides, we have tried to use the RFC metadata as a service interface
but it didnt work out, because '/' characters in BI were represented
by '-_' once we imported this metadata.
Basically, this is the problem we are facing right now. We know that
ABAP proxy is one of the best practises in terms of communication
between WAS servers and due to this, we think we might be missing
something in between.
Is there a way to work with ABAP proxies and this BI internal
fieldnames without having to reassign fields before calling the Proxy
methods and classes in BI?
Could you please help us on this issue?
Thanks a lot in advance and best regards,
David

Your request is described in this how-to guide:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
/ in interface and data types names are represented as -_ inside PI, it will be translated to / in application system automatically.

Undesrtanding Proxy communication with the Integration Engine

I want to understand all the process in a client proxy communication. I know that the Local integration engine sends a PI-SOAP to the Central Integration Engine, and the local integration engine makes the communication with the ICM in the SAP PI side. My question are the next:
1. SAP documentation mentions that the XI Adapter is necessary. Where is it located?, after or before of the ICM in the SAP PI side. What is it function?, because the message is already in PI-SOAP format.
2. How does the local integration engine send the PI-SOAP message? Does it need an XI-Adapter ?.
Thanks in advance.

HI,
1. SAP documentation mentions that the XI Adapter is necessary. Where is it located?, after or before of the ICM in the SAP PI side. What is it function?, because the message is already in PI-SOAP format.
2. How does the local integration engine send the PI-SOAP message? Does it need an XI-Adapter ?.
-->XI Adapter is necessary only at the receiver side not at the sender side, by using proxy pre-configuration steps and proxy framework message from the sender system(Client proxy) will reach PI system. So, in this case XI adapter is not necessary(adapterless communication).
Proxy Framework which consists of Proxy Generator and Proxy Runtime:
Proxy Generator- Converts ABAP corresponding elements to WSDL corresponding elements and viceversa and by using Proxy Runtime, local Integration will be connected to Central Integration.
When a request is sent form client proxy-->ABAP corresponding elements will be converted to WSDL elements and local integration engine will be connected to central integration engine and whole process will be done.
If the receiver system is SAP, and since there can be many SAP systems connected to PI, to send data from PI to that particular receiver SAP system, PI needs the receiver system details like business system name etc. So, XI adapter is manadatory only at the receiver side.
check out this blog for more info:
[http://www.****************/Tutorials/XI/ABAPProxy/page1.htm]
Regards,
Sunitha

Consume WSDL in ABAP proxy : Issue with name space

Hi,
I was trying to consume a WSDL in ABAP and I have created ABAP proxy using wizard in SE80 and also did the LPCONFIG.
While calling the proxy methods it is throughing the "authrization failed" error because of the following issue.I have successfully executed same WSDL from some third party tools with out error.only difference I have observed in SOAP request is, Third party tools passing all name spaces at envelope level but in ABAP proxy it is not passing all name spaces at envelope level.
1. SOAP genarated from WSDL in third party tool.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://schemas.xxxxx.com ">
<soap:Body>
 <tns:GetKMContent>
 <tns:request>
 <tns:clientID>1</tns:clientID>
 <tns:employeeID>307478</tns:employeeID>
 <tns:languageCountryCode>en-US</tns:languageCountryCode>
 <tns:wscVariables>
 <tns:empcountry>US</tns:empcountry>
 </tns:wscVariables>
 </tns:request>
 </tns:GetKMContent>
</soap:Body>
</soap:Envelope>
SOAP genarated from WSDL in ABAP proxy.
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header>
<n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/">
<TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Full</TraceLevel>
</n0:Trace></soap-env:Header>
<soap-env:Body>
 <nr1:GetKMContent xmlns:nr1="http://schemas.xxxxx.com ">
 <nr1:request>
 <nr1:clientID>1</nr1:clientID>
 <nr1:employeeID>307478</nr1:employeeID>
 <nr1:languageCountryCode>en-US</nr1:languageCountryCode>
 <nr1:wscVariables>
 <nr1:empcountry>US</nr1:empcountry>
 </nr1:wscVariables>
 </nr1:request>
 </nr1:GetKMContent>
</soap-env:Body>
</soap-env:Envelope>
I was trying to use the SOAP genarated in ABAP proxy in thrid party tool and end up with same "authrization failed " error. If I move the name space nr1 from <nr1:GetKMContent xmlns:nr1="http://schemas.xxxxx.com "> GetKMContent node to soap-env:Envelope <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:nr1="http://schemas.xxxxx.com "> then it is working fine.
Question :Is there any way in ABAP proxy to pass name space at soap-env:Envelope level or is there any way to change the SOAP request once it is genarated from ABAP Proxy?. Is there any API to change SOAP information?
Thanks,

Hi Kavitha,
I am also facing the same issue.
Could you please share the solution if you have solved this.
Thanks,
Arun

Http to abap proxy

Hi ;
Can somebody help me by sending screenshots for a http to abp proxy scenario.
I am new to sap xi .
i need a http cleint also,
Thnx

Hi
Here in this case it is a http client to abap proxy. For http client (sender CC) u wud not req sender agreement. Follow the below link for http client config:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
And u shud have the DT,MT, MI, Mapping in place. U wud do the req confir in ID and recv agreement will be for proxy. For that follow this link.
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Combine these two and u will get ur thread anwsered for sure. In this post the file will be replaced by http client. remeber no need to sender agreement.

XI 3.0 SP14 Synchronous SOAP- XI- ABAP Proxy - fails with "System Error"

Hi All,
The synchronous response message fails at the stage "Receiver Identification".
It seems that the synchronous response XML has no "sender" attribute, so obviously the receiver determination fails.
In the message monitor I can see the correct payload coming from the ABAP proxy, so that part looks OK.
I have the same scenario working perfectly on another system landscape, so there might be a configuration side to it.
Thanks is advance,
Ofer
Message was edited by: Ofer Even-Tsur

Hi,
for the error information SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
looks like xi is not able to find a reciever of best case. Open up the scenario in COnfiguration, open up the modify(add spaces) and activate reciever determination / reciever communication channel.
cheers,
naveen

Sending the Purchase Ordr frm ECC to PI(BPM) thrgh ABAP proxy communication

Hi Experts,
     We have a requirement where we have to send the Purchase Orders(PO's) generated in ECC system to PI where the PO will be routed to webservices after some error handling(in BPM).etc.
     We are able to generate the PO's in ECC system, but are searching for a way to push this data to the Service INterface (which we have generated through ABAP proxy connection in SPROXYin ECC) which we have used for implementing the BPM in PI.
    We have thought of using BADI to push the PO's to the Service INterface.But have not been able to find a suitable BADI.
Please help in finding a suitable BADI or Suggest any Better way for doing the same if you are aware of....
Please respond quickly as we have short deadlines to be met....
Thanx in advance...
Nandan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

Mail Sender to Abap Proxy Receiver with Attachements

Hi All,
Scenario: I need to create a ticket in Solman from a mail. I intend to do the scenario as Mail sender to Abap Proxy receiver asynchronous.
I have configured my sender mail adapter and am able to get the mails in XI. The attachements also appear in Inbound payload as MailAttachement-1, MailAttachement-2 etc. I have checked use mail packege and keep attachements in sender adapter.
Transport Protocol: IMAP4
Message Protocol: XIPAYLOAD
Queries:
1. My Inbound Data Type is the mail Package -- ximail30_xsd. Here in sxmb_moni I can see the mail attributes like from, to and the mail body in content. But How can I read the attachements in my message mapping.
2. How can I pass these attachements to Abap Proxy ( I do not need to alter attachments only pass to proxy ). These attachements have to be attached to the Solman ticket in SOLMAN server.
Appreciate your kind response to my above queries.
Thanks.
Regards,
Siddhesh S.Tawate
PS: I have tried using PayloadSwapBean in adapter module but still the content at source remains same.

Hi,
Please find below the part of code that might help you. I have given code only responsible for attachements part of the ticket.
loop at lt_attach into l_attachment.
 count = count + 1.
 if count = 1.
 first_line = 1.
 endif.
 l_type = l_attachment->GET_CONTENT_TYPE( ).
 split l_type at '"' into l_type
 file_name
 l_name.
 l_name = file_name.
 split file_name at '.' into file_name
 file_type.
 l_xstring = l_attachment->GET_BINARY_DATA( ).
 strlen = xstrlen( l_xstring ).
 Compute int = ( strlen div 255 ).
 Compute rem = ( strlen mod 255 ).
 if rem <> 0.
 int = int + 1.
 endif.
 count1 = int.
 if count = 1.
 last_line = count1.
 else.
 if int = 1.
 first_line = last_line.
 else.
 last_line = first_line + count1.
 endif.
 endif.
 wa_APPX_HEADERS-APPXNO = count.
 wa_APPX_HEADERS-DESCR = l_name.
 wa_APPX_HEADERS-FILETYP = file_type.
 wa_APPX_HEADERS-FILENAM = l_name.
 wa_APPX_HEADERS-FILEFM_UL = 'BIN'.
 wa_APPX_HEADERS-FIRSTL = first_line.
 wa_APPX_HEADERS-LASTL = last_line.
 wa_APPX_HEADERS-FILELEN = strlen.
 wa_APPX_HEADERS-LAST_USR = sy-uname.
 GET TIME STAMP FIELD wa_appx_headers-TIMESTAMP.
 append wa_APPX_HEADERS to it_APPX_HEADERS.
 while count1 <> 0.
 count1 = count1 - 1.
 if count1 <> 0.
 wa_APPX_LINES_bin-LINE = l_xstring+0(255).
 shift l_xstring left by 255 places in BYTE MODE.
 ELSE.
 wa_APPX_LINES_bin-LINE = l_xstring.
 endif.
 append wa_APPX_LINES_bin to it_APPX_LINES_bin.
 clear: wa_APPX_LINES_bin, wa_APPX_LINES.
 endwhile.
 first_line = last_line + 1.
 clear: strlen, count1, file_name, file_type, l_type, int, rem, l_xstring, l_attachment.
 endloop.
CALL FUNCTION 'BAPI_NOTIFICATION_CREATE'
 EXPORTING
 NOTIF_EXT = wa_NOTIF_EXT
 NOTIF_CRM = wa_NOTIF_CRM
IBASE_DATA =
 IMPORTING
 NUMBER = Refnum
 NUMB = Numb
 REFNUM = Ticket_No
 SYSID = SYSID
 TABLES
 NOTIF_PARTNERS = it_NOTIF_PARTNERS
 NOTIF_NOTES = it_NOTIF_N_EXT
 NOTIF_SAP_DATA = it_NOTIF_SAP_DATA
 NOTIF_TEXT_HEADERS = it_NOTIF_TEXT_HEADERS
 NOTIF_TEXT_LINES = it_NOTIF_TEXT_LINES
 APPX_HEADERS = it_APPX_HEADERS
 APPX_LINES = it_APPX_LINES
 APPX_LINES_BIN = it_APPX_LINES_BIN
 RETURN = RETURN
Please observe how first and last line of attachement is calculated. That is what created problem for me initially.
Hope this helps.
Regards,
Siddhesh S.Tawate

Support package upgrade / SPAU with multiple queues

Hello, We are upgrading our support package level on our ECC 6.0 system. I divided up the support packages into 4 different queues:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
SAP_BW
SAP_AP
SAP-HR
After importing each queue, I had a few things to do in SPDD and SPAU. I created a new SPDD or SPAU transport request for each queue. My question is now what is the recommended procedure to handle these SPAU/SPDD transport requests when you have multiple queues? I plan to define the same queues when doing QA and PRD. Do I mark all of the requests and then when I do each queue, I only specify that particular request? Thank you in advance for your help.
Best regards,
Russ Cook

Hi Russ,
when did you export the different SPAU requests or didn't you export them at all?
If the export happens only after all queues are already imported, this final system state (component version + SP level) is stored in the requests.You are then not able to include e.g. the request for the SAP_BASIS SPs into the SAP_BASIS queue, because the other components are still on the old version, while according to the request they should be on the newer state.
So, the right procedure would be; import the SP queue, do the modification adjustment for this queue, mark the workbench request as modification adjustment transport request and export this request. Then you can import the next SP queue.
Best regards,
Dirk

Http to Abap Proxy communication with multiple queues generation in Recevr

Similar Messages

Maybe you are looking for