I just formatted my hard drive and I need to find out what my "wireless password is"

I just formatted my hard drive and I need to find out what my "wireless password is". I was in a hurry when I did format my PC that when I got to given my wireless a password, I used the same one as before. Now I have tried to finding what it is for my other products, I don't know where to look. Do I or can I change the password without losing anything? Need help PLEASE
[Personal Information Removed]

Hi:
You need to read your router's configuration instructions on how to access the router's menu.
Hopefully you can access that and in the wireless security menu you will find the passkey to use.
Paul

Similar Messages

I have an old TC (500GB) and I need to find out what's on it.

Currently I have a 2TB TC backing up my iMac. I have an older, smaller TC (500GB) that I think came from a previous HD failure on an older iMac, and I think any info was migrated to a new HD. If I unplug the current TC and plug in the older one, will I see what's on it? If so, and it's contents have already been transferred (which is why I want to see), how can I wipe the TC clean to use as storage? If the data from this old TC was migrated to a new HD, would the old TC be wiped clean? This was done at the Apple store. Am I clear on this? I'm concerned the small TC will begin a backup of my iMac , which isn't my purpose, as I'm looking to start over with this smaller TC. I was unable to find a discussion which answers this. Thanks.

Let me answer the last bit first.
I'm concerned the small TC will begin a backup of my iMac
A TC is a dumb as a board hard disk in an airport router.. it will do nothing.. it will sit on the network and do nothing at all. All smarts for backup are Time Machine which is software on the computer.. and TM will not start doing new backups unless you tell it.
If I unplug the current TC and plug in the older one, will I see what's on it?
Yes.
Unplug a computer from the network.. your imac.. !! And plug in the old TC. LAN to LAN port.
Do a factory reset of the TC if the computer cannot then access the TC.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
If the data you are trying to find is in TM backup it is not easy to find out what you are missing.
Please follow the instructions here.
http://pondini.org/TM/17.html
If the data from this old TC was migrated to a new HD, would the old TC be wiped clean?
The apple store will not wipe the old TC .. or at least that would not be good practice. It is your data and your job to keep or delete it.
If you want to wipe the TC open the airport utility and go to the disk tab and select erase.. if you are keeping the TC for yourself.. just do a quick erase.. takes a minute or two.. if you want to sell it then do a one pass erase which will take a few hours.
If you want to use the old TC .. remember it is now 4 years old.. maybe nearer 5years.. it has done its time.. it will die shortly.. suddenly and without recourse. If you put info on it you need.. you will regret it.

HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
Then, install OS X.

I format my hard drive and now dont have a sync key to access to my account, please help me!

Please Help me! My computer was infected by a virus, and I format my hard drive and reinstall the OS. Now I installed Firefox 4 beta 10 but don't have access to my sync account because i don't the "Sync Key" and don't use Firefox in other devices... please please help me to access to my account I need recover my bookmarks and configuration, Thanks.

Sorry, without your Sync Key you're out of luck. It is used as the decryption key for the data that is stored on the Sync server.

I formatted my hard drive and have tons of bookmarks I saved, but I can't figure out how to get them from my old folder into my new folder for my bookmarks.

I formatted my hard drive and backed up all my bookmarks to an external hard drive. I now want to take my bookmarks from my external hard drive and put them into my freshly formatted computer but I can't seem to find the place on my hard drive to save my bookmarks to. I searched everywhere online and it keeps telling me to import an html, but that doesn't help when I have about 20 bookmark folders and about 100 bookmarks altogether. Please help. Thank you.

'''''"... I have about 20 bookmark folders and about 100 bookmarks altogether. " '''''
Firefox doesn't store bookmarks like that, sound like a Windows / IE favorites scheme used for '''''url''''' files and folders which isn't directly compatible with the way Firefox does things. Firefox uses a '''json''' file for bookmark backups, a '''bookmarks.html''' for import and export is bookmarks, and stores the users bookmarks in the '''places.sqlite''' file, along with browsing history.
Put those folders and bookmarks in the '''\user\Favorites\''' folder so they are in IE and export your IE Favorites in HTML format, so you can import them into Firefox.
In IE:
File > Import/Export - Export to HTML file
''then in Firefox:'' <br />
Bookmarks > Show All Bookmarks -> Import & Backup - Import HTML... = From HTML file

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
Where do I find this library?
thanks
Shak

Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
(1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
If that doesn't work
(2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
This may take a while. Once completed, re-open iPhoto.
And that should (I stress should) cure it.
Good luck.

Hi, I want to format my hard drive and reinstall my PC. How can I transfer my Acrobat Standard licence ? Regards.

Hi,
I want to format my hard drive and reinstall my PC. How can I transfer my Acrobat Standard licence ?
Regards.

First you should deactivate any Adobe programs you have installed so that you free up the activation for when you want to reinstall. When you are ready to reinstall, do so using the installation files - transferring generally does not work.
Before you do anything you might want to check to make sure you have access to installation files for reinstalling the program(s).

I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks

I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
tt2

HT1351 I have just reformatted my hard drive and re-installed iTunes; how do I connect back to my library on an external hard drive?

I have just refromatted my hard drive and reinstalled itunes; how do tie it back to my library on an external hard drive?

If the whole library was on the external drive then press and hold down shift as you start iTunes, then use the Choose option to reconnect to it.
If it was only the media folder, but you backed up the library folder then restore that to <User's Music> in your rebuilt machine and you're good to go.
If you forgot to backup the library folder, but you don't care about ratings, play counts, playlists etc. then shift-start-iTunes, Create a new empty library at the root of the external drive, e.g. at X:\iTunes, move the media folder inside that as X:\iTunes\iTunes Media, then use File > Add Folder to Library to import the media.
Otherwise see Recover your iTunes library from your iPod or iOS device.
tt2

There is more data storage on the hard drive and I can not find it (should be deleted)

Hi I need some help, i recently bought a Macbook Pro, so good with that but when storing my files I realized I had sent more files, I deleted my files and it took me hours! and when checking the status of storage I realized I had more 20GB hard drive and I can not find that data stored anywhere! and i made the securely empty.
P.S. I had a small problem when cleaned the trash, I stopped for lack of time but when i stop it, I realized I had nothing inside then... (should leave something at least, because it was an incomplete process.)
(here says that i have 40.54 GB from other stuff, and i'm just using like 13Gb of my data) its in spanish by the way... sorry for that.
Thanks for your patience!

Other (Otros) is everything but Applications according to your chart. That includes operating system and files.

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

HT1657 I've just rented End of Watch and the lip sync is out, what should I do?

I've just rented End of Watch and the lip sync is out, what should I do?

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

if they're pcs, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do!

Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do! theres noting pending on the App Store or iTunes. Nothing failed. I've reset my settings. Logged out and back into itunes. It's really annoying as rinsing my data!

After talking to Apple for 3 hours I figured it out myself.
Tre here was a singular failed song on iTunes on the computer that was trying to download and messing everything up. Maybe if you use iTunes on the computer and have a little mooch you'll find the same thing. I think it was hidden in the purchased part of it

I just formatted my hard drive and I need to find out what my "wireless password is"

Similar Messages

Maybe you are looking for