I updated my iPod touch 4 to the latest OS and now the admin doesn't come up. How can I access the iPod admin?
I have unplug and plugged in my iPod to my pc 100 times and admin never comes up. When i go to iTunes I don't see anyway to
get to the iPod admin. I copied quite a few of my CD's into iTunes but can't find a way to sync the player with the itunes on my computer.
I don't like the new update...it changed the look and feel of everything...for the worse.
Many people haven't yet figured out the new default interface in iTunes 11 but it's not that difficult. To get to the iPod information so you can sync, click the iPod button in the header bar at the upper-right, e.g.:
Or go to the View menu and select "Show Sidebar" and the interface will then look substantially like it did in earlier versions. If you are running Windows and don't see the menus, press Control-B or go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards.
Similar Messages
-
I was badgered into installing the latest Itunes and now I cannot find my music nor my podcasts. Where the **** did they go and how can I get them back? You folks at Apple sure make it hard to like you or want to use your products.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't normally lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
Would you mind telling me which anti-virus package you use? It may be that it is disturbing iTunes when it tries to write out the fresh database, as it does after almost any activity with your library. I'm noticing more of this type of problem than usual and trying to see if there is any pattern. It may help to prevent a repeat of the problem if you look at the advanced options for your AV package and see if you can find a way to exclude the main iTunes library folder (and subfolders if possible) from any real-time scanning process.
tt2 -
My ipod touch 1st generation had itunes and usb symbol that stack-up there..i can't open my ipod because of that symbol.
You'll have to restore your device in iTunes. Connect in recovery mode, explained in this article:
iOS: Unable to update or restore -
how can I access the internet on my ipad mini while wifi signal is strong,
Your question isn't clear enough. If it's a strong signal, you're good to go.
-
My daughter continues to request a new password when I change it so she can access the App. store and download stuff with out my permission? What can I do to block the app. store on her itouch or stop her from being allowed to change the password?
Hide the App store via Restrictions. See:
iOS: Understanding Restrictions -
I just recently purchased an ipod touch second generation and when I sync it with my laptop (hp pavillion g series with windows seven) and it said the driver didnt successfully sync or something like that. Can anyone help?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
hello, cant access the itunes store or log in with my apple id as i get an error message saying cant connect to the i tunes store. i even attempted to download the latest ios6 which cut of. just does not want to accept my apple id
Hi Mr Lenz
I had the exact same problem yesterday when i tried to get some music from the store. The same messages appeared on my screen. I just waited for an hour or so and logged on again with no problem. I was able to download music normally. Perhaps there was a momentary glitch at the iTunes store at that time.
You might try to log on again and see what happens.
Rick -
I updated my Iphone today and now I cant make phone calls. I cant still send and receive texts and access the interenet.
reset iPhone if you haven't already
http://support.apple.com/kb/HT1430
essential after any update -
I have a computer running Windows XP and it's about 5 years old. I upgraded to Firefox 3.6 (or whatever the decimal is now) and now it runs sluggishly slow. Is there a way I can get back to my previous version of Firefox?
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 3.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)I've always been able to minimize all my windows by double clicking the title bar. Yes, I could click the yellow button -- I just want the old feature back because I do it so automatically. Now when I double click the title bar it opens a new tab. I was able to do this with all the previous versions of Firefox as well.
-
When I try to open FF4 I get the message it can't be opened because it is not supported on my architecture. I can't believe no-one else has had this problem. You must have a lot of internet duffers who don't really know what they're doing. I need to get my old version of FF back if I'm going to run it on my computer. I don't understand why an app as widely used as this doesn't have a pre-app that assesses whether one has the architecture to run a new version. You advertisement merely said OS 10, and "all systems". It did not specify a newer MacOS than my 10.4.11. Now I seem to be out of luck and will just use Safari.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I cannot get my firefox application to open and it is not offering me any options for troubleshooting.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Thanks for any response given
Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Why can't my iPhone find my printer?
Try pressing the sleep and home buttons both together for about 5 seconds and reboot the device. Once the iPad reboots you should be able to go into the mail settings for that account and update the credentials.
-
My granddaughter's Ipod Touch is disabled due to too many attempts at entering her password. How can she get her Ipod enabled and retrieve her password which she has forgotten?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
when I insert a CD that I know has photos embedded in it, I get an error message: you inserted a blank disc.
The disc shows up nowhere on mhy computer, desktop,etc.
How can I access the disc that isn't there?
Dan MillerSee my FAQ*:
http://www.macmaps.com/cdrfailure.html -
i'm using 2nd generation iPod, do they have update for this model?i always kept checking for update but server says my 4.2.1 is the latest version and now i can't sync update for Marvel, Comics, iBooks n Archies apps,...any solution?
No, they don't.
(70218)
Maybe you are looking for
-
I am having a terrible time trying to print a booklet. The end result should be 8.5 x 11, printed on 11 x 17 paper. If I try to print directly to our Canon ImageRunner, I get an error. If I export to a PDF, it either prints out as an 11 x 17 page si
-
Hey everyone, I don't know if it is possible but can a mac user use the isight to send video to a PC with MSN? Which applications is needed to make it happen?
-
Photoshop cs6 opens some jpg always in camera raw , how can i avoid it?
Hi photoshop opens some jpg files 3 (i have a folder with 60 pics raw and jpg ) and it opens always via camera raw i don't know why but is there a way to avoid it? i mean i want to open these 3 files like other jpg files , directly in photoshop thank
-
Hi all, here is a strange(?) behaviour of FM8: If a book is saved as XML, the behaviour is In FM7.x: The book file is saved in several xml files - one for each component (which is correct).The .fm and backup.fm files remain untouched (which is correc
-
hi i have a problem when i try to do a video chat, there will be a message that says user did not respond and that there is a "Communication error". i am not sure what the deal is, i got it to work with them once but now i can't connect which ***** b