I was trying to find out if the PCI-DIO-32HS will take thermocouple readings?
I have a PCI-DIO-32HS and a SCB-68 connector block. I am trying to figure out if the card will receive the input coming from a thermocouple.
Dennis is right.
however, if you feel like not spending more money on a analog input board, and have hands for a little electronics, here what you can do:
1) use a 16bit D/A converter (eg DAC7744), connected to the card.
2) connect the output to a comparator (LM311), to compare with your own analog input. you might want to isolate the 2 inputs via INA105.
3) connect the output via a pull up resistor directly to pin 1 of your parallel port.
4) create a small Labview program for making a 16 (or 8 or 4) bit comparison process:
- create an analog value of 0V (via 16 bit digital card)
- check if response is true or false (higher or lower than your analog in) from the parallel port
- if true, send new analog value of -5V
....check again, 16 times.
you got your analog value. of course this is a relatively slow process, as you have to read the parallel before each time you send the new analog value. yet, it is going to be much faster than a NI-USB 6008 for example. i expect a rate around the KHz at least.
... And here's where I keep assorted lengths of wires...
Similar Messages
-
Trying to find out if the western digital will work in my G5 xserve intel MA409ll/A and I would like to use WD Drive WD1602ABJS-43P5A0
does anybody know.Trying to find out if the western digital will work in my G5 xserve intel MA409ll/A and I would like to use WD Drive WD1602ABJS-43P5A0
does anybody know. -
i have had e mails back over the last question i asked over my wifi problem.
the e mails i recieved had nothing to do with resolving this matter i am banging my head against a brick wall .
still no wiser about why wifi stopped working trying to find some idea why my i pod suddenly stopped working is a joke .
as i stated before will never buy another i pod ever .
this was my pride and joy always looked after it never dropped it or got it wet it just lookes like apple have left it behind
i plugged my grand sons i pod in to my i tunes on my computer and it asked if i wanted to update it to4.1 or something like that, it will not do that with mine
any body got any ideas because my i pod with out wifi isn,t much use to me except as a music player
yours slobber- What is your wifi problem? Is it this?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Some users have received this after an update. It seems to be hardware relaed.
- Have yu tried making an appointment at the Genius Bar of an Apple store?
- You say yu have a 1G ipod but than discuss iOS 4.1 update. a 1G iPod can nly go to 3.1.3. To identify your iPod:
Identifying iPod models -
I am trying to find out what the FULL model number is on Satellite Pro L500, please help!
Hi, I have a Satellite Pro L500, but I am trying to locate the rest of the model number (L500-XXXX.... etc). I have looked on the bottom label, and all it says is Satellite Pro L500 SYSTEM UNIT.
My part no. is PSLS1A-031002
My HDD is 500gb
RAM is 4GB (which I think was upgraded from 2GB)
Windows 7 Home Premium
Pentium Dual-Core CPU T440 @2.20GHZ
If you have any idea what it could be, please help meSatellite Pro L500 .. PSLS1A-031002
Must be this one.
Satellite Pro L500 (PSLS1A-030002)
The original memory is 4 GB.
This site is for US computers. The drivers and utilities for that Australian model are here.
-Jerry -
Trying to find someone in the athens, ga area that will work on a 2006 iMac
my computer will not turn on and the local mac store said they will not work on a machine that is more than 5 years old. any suggestions on where to take it for repair? i have a lot of data on the computer that i need to retrieve.
I will also add, you may want to have them simply replace the PRAM battery and see if that will fix it. It is right at the age where the PRAM battery goes out. If that doesn't work, have them remove the hard drive so it can be put in an external hard drive case. Regardless, this is why you must backup your data in the future.
-
Why can't Siri find out who the artist is of a song the name of the artist isn't music?
I was trying to find out who made the parody of John Anderson's song Swingin using these lyrics ( I was standing on the front porch seeing ugly from her head to her toes and we were standing) the first time I asked she said I can't do that Genius isn't on or something like that I asked her what Genius is and she showed me the defanation didn't need to know that but what ever now she eather says I can't look for music or I'm not lesaning to music app I was till I held down the square talk to her I keep telling her I don't want her to the song just the title and artist name? And why does she not have a cash or temp files for resent conversations it doesn't make any since to me as to why she has no idea what the last thing you said to her is so when you tell here the search or what ever she did was in error or 404 should I tell Siri that system found that answer to be in error code 404 and go from there, shouldn't a digital asstent be a fully growing I.A. And by growing I mean shouldn't have to lookup any book known entity from the internet at some point in time but as it is now she is only as smart as she is and most her knolge is from the web which isn't the best way of learning everything I'm sure us smart kids could idk talk to her if she at least remberd any thing at all ever at least per chat I have don't realy care if who ever reads this does or not even if I didn't wouldn't change my opinion but espaaly as Daddy I fill the need to try and teach my kids every thing they need to know in life and Siri doesn't have a cance at learning from her mestaks becouse she can't rember what you just said or ask if I designed a A.I. That wasn't Geting smarter by the day I wouldn't tell a soul I was the desiner I would be ashamed of my work if it couldn't carry on a conversation and be able to just know how to spell Genius on its own after it Wikipediaed the answer 1sec or 1000 years later
Hello there, David.
The following Knowledge Base article offers up some great initial steps to try when an application is not performing as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If restarting your iPhone (Step 3) doesn't work, you may also want to try Resetting your phone as well:
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
If the issue persists, review some of the recommendations found here as well:
OS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
If you find the issue is still unresolved, then backup and restore your phone to iTunes.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How to find out when the last time a tcode was run by someone
Hi Team,
I am just trying to find out if there is a way to find out when the last time a tcode was run by someone.I mean i need to know when was a certain tcode was last run.
Thanks,
PriyankaHI Priyanka
Another way would be using transaction STAT,enter the t-code you like to monitor.This will provide all details,like user, time etc...
Hope this will help
Thanks
Santosh Kumar -
I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version
Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free...... -
I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?
I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format. -
I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?
You may be able to find your Apple ID at Look up your old and forgotten Apple ID
-
I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?
Without knowing what you did it is impossible to give advice on how to correct it.
If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive. -
I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am trying to find out the proper graphic card for mac.
I am trying to find out the proper graphic card for imac. The graphic card which is mentioned in the web sit, that Graphic Card is not available in the open market. In open market NVIDIA GeForce GT 750M and NVIDIA GeForce GT 755M is available and this card is not mentioned in web site. So please help to select a proper suitable GPU.
Are they supportable for After Effects ray-traced 3d renderer.
I am confused because adobe recommended on the following graphic card.
Mac OS
GeForce GTX 285
GeForce GTX 675MX
GeForce GTX 680
GeForce GTX 680MX
GeForce GT 650M
Quadro CX
Quadro FX 4800
Quadro 4000
Quadro K5000 -
I activated an iTunes gift card, my iPod showed the amount available ($15) then after downloading 2 songs my balance was $.04. Any ideas on what happened to the rest of my funds or how I can find out where the rest of my money went?
- Have youwent to yur iTunes account looked at your puchase history for purchases thant y might have forgotton?
- Maybe you had an unpaid balance before redeeming the card.
- Contact iTunes
Apple - Support - iTunes - Contact Us -
My ipod was stolen, can I find out what the serial number of it is, based on looking at a connection history in my itunes? How would I do this? I didn't register it. I think I found the guy selling it, just looking to confirm the serial number and I'll make a phone call to the police.
Thankskevilay2013 wrote:
is this possible?
Yes.
Open iTunes on the computer you used to sync the iPod and select Preferences… from the iTunes menu.
Select the Devices pane. Position the cursor over any of its backups. The iPod's serial number will appear in a popup window.
Maybe you are looking for
-
Before I explain what's going on let me explain what I did cause everyone I've asked so far always wants me to explain what I did first. My computer needed to be wiped clean. The only thing I cared about on it were the 3953 photos on there.
-
Hi Friends, Database Oracle 9i - Pro*C/C++: Release 9.2.0.4.0 OS - powerpc-ibm-aix5.3.0.0 C Compiler - GNU gcc version 4.2.0 I am using the below command to compile "daemon.pc" /usr/bin/make -f proc.mk build OBJS=daemon.o EXE=daemon The errors I am f
-
BI Statistics -- Need to display list of Queries with query counter
Hi All, I am using the the infoobject 0TCTBISBOBJ (BI Application Object) - for to get the list of queries inthe system. I am also restricting the infoobject 0TCTBISOTYP(BI Application Object Type)- to ELEM (Query) inthe filter area. I loaded load
-
Hi, I am working on BW 3.1. I am working on a CRM "order receipts" report. In which we have all transactions in AUD. I want to add an extra field in report which should show value in USD. Can anybody tell me how to do this? Pls give step by step guid
-
Just recently, itunes will not shuffle the songs in my library. Shuffle is checked, but when I click on play, one song plays, then it stops. Any held would be appreciated.