In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this?
In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this? This is the way I scrolled for MIDI editing on Logic 9
Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
it's here where one can configure a mouse device.
Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
Have a nice day!
Similar Messages
-
Since the last upgrade, when the browser is open the mouse randomly clicks on things changes windows by itself. In addition highlighting things to cut and past is almost impossible... this transfers over to all open programs word, movie maker, audacity, etc... and as soon as the browser is close the problems go away... I am having this on two computers the first is a 32 Bit Vista system with a corded mouse the second is a dual boot 64 bit Win 7 and Linux Mint laptop using a Logitech cordless mouse and built in mouse pad both mouse and pad does this... in both operating systems.
I thought it was a problem with the mice or interference with the wireless receiver or from an Xbox in the same room interfering with the systems, however updated drivers were downloaded and installed on both computers for all three operating systems.'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems? -
I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but I can't type. If I restart, everything is fine again. Is there anything that will fix this problem?
Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor. The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz. If I use HDMI to VGA input, the image is much clearer. Is there a way to get the Displayport to work?I'm having exactly the same keyboard issue. Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
I'm seeing a great many devicemgr and rake errors in my system log. I don't know if they're related. How 'bout you?
If you're unfamiliar with the system log…
Open /Applications/Utilities/Console.
If necessary, choose View > Show Log List.
system.log is at the top of the FILES section.
Try searching it for hot words like DEBUG, FATAL, and aborted.
I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
-Bryan -
Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !! -
Why Is The New Click Wheel TERRIBLE?
What happened to the flawless design of the click wheel on all previous ipod models.
The new click wheel on the iPod classic is absolutely terrible. It is unresponsive, highly unsensitive, slow and works maybe half the time especially when scrolling counterclockwise.
APPLE, Why the sudden change? I can't even control it through my jeans anymore.
Before you ask any questions, no I am not using any case, my iPod is naked and brand new. Any other iPod I have owned was super responsive and had perfect click wheel sensitivity and worked through my jeans or any case it was in.
I am very unhappy with the new click wheel. Who else is with me?Well, if it is a defect, which I think it is, it is very common. I'm on my third 120 GB classic. First one had a buku of issues with skipping songs, shutting itself off etc., but the click-wheel was flawless.
Sent that one back to apple, received replacement which had same skipping and restart issues with the added joy of the click-wheel laziness you are describing. Sent that one back, got third unit yesterday, also installed new version of software. Skipping issues and restarts seem to have gone away, but having problems with this click wheel. I'm giving it a couple weeks,and I'll send this one back too. When listening to music, it's not that big of a deal when the wheel goes to sleep and I've got to click it back into action, but while trying to play games it becomes very problematic and unacceptable.
I bought my first ipod second hand and loved it. This is my first new iPod, and it's killing me with aggravation. I have heard before that you should wait until 90 days after any apple release so they can work the bugs out. Seems to hold very true with this experience. -
Why does click wheel scrolling on an iPod not allow lists - songs, artist, album, etc. - to rollover from end to beginning and vise-versa? For example, it would nice while scrolling through an alpha list of album titles, you could go from "A" items backwards through "Z" items, instead of going all the way through the alphabet from "A" to "Z". Will this ever be allowed?
Apple likes to add little annoying things so that when they release the new ipod they can solve it on purpose and people will be like YAY!! thats probably what that is
-
A script that captures the coordinates of the mouse clicks and saves them into a file
Hello,
I'm trying to create a cartoon taking a movie (I've chosen blade runner) as base. I've got the real movie and I've exported all the pictures using VirtualDUB. Now I have a lot of images to modify. I would like to modify the actors faces with the faces generated by Facegen modeller. I'm thinking how to make the whole process automatic because I have a lot of images to manage. I've chosen to use Automate BPA,because it seems the best for this matter. I'm a newbie,so this is my first attempt using Adobe Photoshop and Automate BPA. I wrote a little script. It takes a face generated with Facegen modeller and tries to put it above the original actors faces. But it doesn't work very good and I'm not really satisfied,because the process is not fully automated. To save some time I need to write a script that captures the coordinates of the mouse when I click over the faces and that saves them into a file,so that Automate BPA can read these coordinates from that file and can put the face generated with Facegen Modeller above the original face. I think that Automate BPA is not good for this matter. I think that two coordinates are enough,X and Y. They can be the coordinates of the nose,because it is always in the middle of every face. It is relevant to knows how big should be the layer of the new face,too. This is the Automate BPA code that I wrote :
<AMVARIABLE NAME="nome_foto" TYPE="TEXT"></AMVARIABLE>
<AMVARIABLE NAME="estensione_foto" TYPE="TEXT"></AMVARIABLE>
<AMSET VARIABLENAME="nome_foto">br</AMSET>
<AMSET VARIABLENAME="estensione_foto">.jpeg</AMSET>
<AMVARIABLE NAME="numero_foto" TYPE="NUMBER"></AMVARIABLE>
<AMVARIABLE NAME="coord_x" TYPE="NUMBER"></AMVARIABLE>
<AMVARIABLE NAME="coord_y" TYPE="NUMBER"></AMVARIABLE>
<AMWINDOWMINIMIZE WINDOWTITLE="Aggiungere_layer - AutoMate BPA Agent
Task Builder" />
<AMWINDOWMINIMIZE WINDOWTITLE="AutoMate BPA Server Management Console
- localhost (Administrator)" AM_ONERROR="CONTINUE" />
<AMENDPROCESS PROCESS="E:\Programmi_\Adobe Photoshop
CS5\Photoshop.exe" AM_ONERROR="CONTINUE" />
<AMRUN FILE="%"E:\Programmi_\Adobe Photoshop CS5\Photoshop.exe"%" />
<AMPAUSE ACTION="waitfor" SCALAR="15" />
<AMSENDKEY>{CTRL}o</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="1" />
<AMINPUTBOX RESULTVARIABLE="numero_foto">Inserire numero FOTO di
partenza -1</AMINPUTBOX>
<AMINCREMENTVARIABLE RESULTVARIABLE="numero_foto" />
<AMPAUSE ACTION="waitfor" SCALAR="1" />
<AMMOUSEMOVEOBJECT WINDOWTITLE="Apri" OBJECTNAME="%nome_foto &
numero_foto & estensione_foto%" OBJECTCLASS="SysListView32"
OBJECTTYPE="ListItem" CHECKOBJECTNAME="YES" CHECKOBJECTCLASS="YES"
CHECKOBJECTTYPE="YES" />
<AMMOUSECLICK CLICK="double" />
<AMPAUSE ACTION="waitfor" SCALAR="10" />
<AMSENDKEY>{CTRL}+</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="20" />
<AMSENDKEY>l</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="281" RELATIVETO="screen" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="659" MOVEY="281" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="659" MOVEY="546" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="546" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="281" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMSENDKEY>v</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK CLICK="hold_down" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="131" MOVEY="99" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="99" MOVEY="162" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK CLICK="release" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMINPUTBOX RESULTVARIABLE="coord_x">Inserire coordinata X</AMINPUTBOX>
<AMINPUTBOX RESULTVARIABLE="coord_y">Inserire coordinata Y</AMINPUTBOX>
<AMMOUSEMOVE MOVEX="200" MOVEY="200" RELATIVETO="screen" />
<AMMOUSECLICK CLICK="hold_down" />
<AMMOUSEMOVE MOVEX="%coord_x%" MOVEY="%coord_y%" RELATIVETO="position" />
<AMMOUSECLICK />
and this is a short video to explain better what I want to do :
http://www.flickr.com/photos/26687972@N03/5331705934/
In the last scene of the video you will see the script asking to input the X and the Y coordinates of the nose. This request is time consuming. For this reason I want to write a script that captures automatically the coordinates of the mouse clicks. The only thing to do should be click over the nose and the script should make the rest. As "c.pfaffenbichler" suggested here : http://forums.adobe.com/thread/775219, I could explore 3 ways :
1) use the Color Sampler Tool’s input with a conventional Photoshop Script.
2) use After Effects would provide a better solution.
3) Photoshop’s Animation Panel might also offer some easier way as it might be possible to load two movies (or one movie and one image) and animate the one with the rendered head in relation to the other.
Since I'm a totally newbie in graphic and animation,could you help me to explore these ways ? Thanks for your cooperation.These are the coordinates of the contours of the face that you see on the picture. Can you explain to me how they are calculated ? The coordinates of the first colums are intuitive,but I'm not able to understand how are calculated the coordinates of the second one.
Thanks.
1 COL 2 COL (how are calculated these values ?)
307.5000 182.0000 m
312.5000 192.0000 l
321.5000 194.0000 l
330.5000 193.0000 l
335.0000 187.0000 l
337.0000 180.5000 l
340.0000 174.0000 l
338.5000 165.5000 l
336.0000 159.0000 l
331.5000 153.0000 l
324.5000 150.0000 l
317.0000 154.0000 l
312.5000 161.0000 l
309.0000 173.0000 l
307.5000 182.0000 l
Message was edited by: LaoMar -
Is there a way to remove the mouse click splash that appears on See It!
Can I remove the red splash that appears on the mouse click when playing back a recording in See It mode?
The client thinks that it is not visually appealing.
Thank you
Edited by: dgmurphy on Sep 20, 2012 1:32 PMYou can request new features in this forum: <br />
http://webmailnotifier.mozdev.org/drupal/forum/
But I don't think it would be possible, exactly like you described. An extension can't do anything until Firefox is opened and running. Plus the developer would have to create a different version for every Operating System he decided to support with a feature like that - Windoze, MacOSX, and Linux - to be able to use the "System Tray". -
I have tried out the code in this article in ASP.Net web forms with c# and javascript.
I am using Ajax to call the C# from Javascript and load the data from database.
I have used following article to show the pushpins and there infoboxes.
http://blogs.msdn.com/b/rbrundritt/archive/2013/11/08/multiple-pushpins-and-infoboxes-in-bing-maps-v7.aspx?CommentPosted=true#commentmessage
My code works great on IE 11 , when I have compatibility mode on,
but when compatibility mode is off, the mouse click event is not being received by the Javascript function.
Is this expected behavior of bing maps, Are there any workarounds for this problem?
Thanks
NateHi Ricky, I have tried using Chrome and I see the same issue. The mouse events are not being captured.
Here is my code
<%@ Page Title="" Language="C#" MasterPageFile="~/Maps.Master" AutoEventWireup="true" CodeBehind="BingMaps.aspx.cs" Inherits="MyMaps.secure.BingMaps" %>
<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolderBody" runat="server" >
<asp:ScriptManager ID="ScriptManager" runat="server"
EnablePageMethods="true" />
<div id="MapHolder" style="; width:1000px; height:800px; " />
<asp:Literal ID="Literal1" runat="server">
</asp:Literal>
</asp:Content>
<asp:Content ID="Content3" ContentPlaceHolderID="ScriptSection" runat="server">
<script type="text/javascript" src="http://ecn.dev.virtualearth.net/mapcontrol/mapcontrol.ashx?v=7.0">
</script>
<script type="text/javascript" >
var map = null, infobox, dataLayer;
$(document).ready(function () {
GetMap();
function GetMap() {
// Initialize the map
map = new Microsoft.Maps.Map(document.getElementById("MapHolder"),
{ credentials: "lincensekey", zoom: 2 });
dataLayer = new Microsoft.Maps.EntityCollection();
map.entities.push(dataLayer);
var infoboxLayer = new Microsoft.Maps.EntityCollection();
map.entities.push(infoboxLayer);
infobox = new Microsoft.Maps.Infobox(new Microsoft.Maps.Location(0, 0), { visible: false, offset: new Microsoft.Maps.Point(0, 20) });
infoboxLayer.push(infobox);
PageMethods.GetLocations(RequestCompletedCallback, RequestFailedCallback);
function AddData(MapPoints) {
for (var i = 0, len = MapPoints.length; i < len; ++i)
var pushpin = new Microsoft.Maps.Pushpin(new Microsoft.Maps.Location(parseFloat(MapPoints[i].lat),parseFloat(MapPoints[i].lon))
icon: MapPoints[i].group,
height: 50, width: 60, text: MapPoints[i].city
pushpin.Title = MapPoints[i].name;
pushpin.description = MapPoints[i].desc;
Microsoft.Maps.Events.addHandler(pushpin, 'click', displayInfobox);
dataLayer.push(pushpin);
function displayInfobox(e) {
if (e.targetType == 'pushpin') {
infobox.setLocation(e.target.getLocation());
infobox.setOptions({ visible: true, title: e.target.Title, description: e.target.description });
function RequestCompletedCallback(result) {
result = eval(result);
AddData(result);
function RequestFailedCallback(error) {
var stackTrace = error.get_stackTrace();
var message = error.get_message();
var statusCode = error.get_statusCode();
var exceptionType = error.get_exceptionType();
var timedout = error.get_timedOut();
alert("Stack Trace: " + stackTrace + "<br/>" +
"Service Error: " + message + "<br/>" +
"Status Code: " + statusCode + "<br/>" +
"Exception Type: " + exceptionType + "<br/>" +
"Timedout: " + timedout); -
Get the tab page that the mouse clicked on using PLSQL
Another canvas related question ...
Is it possible to detect the tab page that the mouse clicked on
from within a WHEN-MOUSE-DOUBLECLICKED trigger,
SYSTEM.MOUSE_CANVAS returns the name of the tab canvas.
However, I need the name of the tab page within the tab canvas
thanks
Scottresolved - thanks
resolution notes follow:
========================
I forgot to mention that I dont know the type of canvas at runtime,
so the code needs to work for tab and non-tab canvases
Unfortunately, calling TOPMOST_TAB_PAGE for a non-tab canvas results in an
error that can only be suppressed using an ON-ERROR trigger
(SYSTEM.MESSAGE_LEVEL wont supress it, nor will EXCEPTION)
anyway, I resolved this via another related post that I raised today.
"Determining canvas type using PLSQL"
thanks anyway. -
I have an iMAC from about 2007. The mouse will not scroll down. Can this be fixed?
I have an iMAC from about 2007. The mouse will not scroll down. Can this be fixed?
You have to remember, where the scroll ball is, there is a small gap which picks up dust and fluff. That detritus gets everywhere and in your case affects the downward scroll.
Adding just a touch Linc Davis's suggestion, after you have vigorously rubbed the scroll ball on the pad, tap it on a hard surface from time to time. Sometimes you will see small amounts of fluff appear. You should also see dirty marks on the pad. -
Making the mouse click by itself
If you are trying to use an automator workflow with a software that is
not included in the automator list (and therefore there are no prebuilt actions for you to choose), but all you need to do is manually open
the program yourself, place the mouse over the START button in the software,
and you just need automator to click the mouse at a predetermined time,
is there a way of doing that....just making the mouse click over a spot you
have left the mouse, at a predetermined time?
I know how to save the workflow as an ical plug in to trigger the workflow at a specific the time, but I have no idea if I can just make automator "click the mouse" button by itself any place you just leave the mouse.
Any input would be appreciated. Thanks.QuickTime Broadcaster is scriptable, and has commands to start and stop broadcasts:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto"> tell application "QuickTime Broadcaster"
if (exists document 1) then
start document 1
delay 30 -- ...or however many seconds
stop document 1
end if
end tell
</pre> -
How to get the mouse clicked positions on a movie
I am doing a project on Objects tracking
I am capturing the video data using webcamera and playing it using processor in JMF
my problem is , if i click on the movie that is being played currently, i have to display the co-ordinates of the mouse clicked position.
can anyone help me?
Thanks in advance
Sudhahello
i have attache my coding here
see to it
import java.io.*;
import java.io.IOException;
import java.net.*;
import java.net.URL;
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import java.awt.event.MouseEvent;
import java.awt.event.MouseMotionListener;
import javax.swing.*;
import javax.media.*;
import javax.media.util.*;
import javax.media.Buffer.*;
import javax.media.format.*;
import javax.media.Format;
import javax.media.protocol.*;
import javax.media.control.*;
import javax.media.rtp.*;
import javax.media.protocol.DataSource;
import com.sun.media.ui.*;
import javax.media.format.YUVFormat;
import java.util.*;
import java.util.Vector;
import javax.imageio.*;
import javax.imageio.stream.*;
class capturing1 extends JInternalFrame implements ActionListener,MouseListener,MouseMotionListener,ControllerListener
* The entry point of the example
* @param args The command line arguments
int mark_flg=0;
int xpos=0,ypos=0;
mdetect mde=new mdetect();
protected boolean transitionOK;
protected Object synchronizer;
protected Processor processor;
JButton mark;
JButton track;
capturing1(String fname)
{ super(fname, true, true, true, true);
getContentPane().setLayout( new BorderLayout() );
setSize(320, 10);
setLocation(50, 50);
setVisible(true);
processor = null;
synchronizer = new Object();
transitionOK = true;
mark=new JButton("mark");
track=new JButton("track");
mark.setSize(25,25);
track.setSize(25,25);
mark.addActionListener(this);
track.addActionListener(this);
getContentPane().add("East", mark);
//getContentPane().add("West", track);
try {
UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel");
} catch (Exception e) {
System.err.println("Could not initialize java.awt Metal lnf");
Manager.setHint(Manager.LIGHTWEIGHT_RENDERER, new Boolean(true));
addMouseListener(this);
addMouseMotionListener(this);
loadAndStart(fname);
public void loadAndStart(String fn)
boolean status;
status = loadFile(fn);
if (status) status = configure();
TrackControl tc[] = processor.getTrackControls();
if (tc == null) {
System.err.println("Failed to obtain track controls from the processor.");
System.exit(0);
// Search for the track control for the video track.
TrackControl videoTrack = null;
for (int i = 0; i < tc.length; i++) {
if (tc.getFormat() instanceof VideoFormat) {
videoTrack = tc[i];
break;
if (videoTrack == null) {
System.err.println("The input media does not contain a video track.");
System.exit(0);
try {
Codec codec[] = {mde};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
System.err.println("The processor does not support effects.");
if (status) status = realize();
public boolean loadFile(String fn)
boolean status;
URL url;
status = false;
/*Vector v = CaptureDeviceManager.getDeviceList(new VideoFormat(
VideoFormat.YUV));
System.out.println(((CaptureDeviceInfo) v.get(0)).getName());
try{
MediaLocator ml = ((CaptureDeviceInfo) v.get(0)).getLocator();
System.out.println(ml.toString());
processor = Manager.createProcessor(ml);processor.addControllerListener(this);status = true;
}catch(Exception e){
System.err.println("Exception occured\n");
e.printStackTrace();
System.exit(0);
try {
url = new URL("file:"+
System.getProperty("user.dir")+
"/"+fn);
if (url != null) {
processor = Manager.createProcessor(url);
processor.addControllerListener(this);
status = true;
} catch (NoProcessorException npe) {
System.out.println("Unable to create a processor!");
} catch (IOException ioe) {
System.out.println("Unable to connect to source!");
return status;
public boolean configure()
boolean status;
status = false;
// Put the Processor into the configured state
processor.configure();
if (waitFor(processor.Configured)) {
// Set the content descriptor to null so that the
// processor can be used as a player
processor.setContentDescriptor(null);
status = true;
} else {
System.out.println("Unable to configure the processor!");
return status;
public boolean realize()
boolean status;
Component c;
status = false;
// Put the Processor into the realized state
processor.prefetch();
if (waitFor(processor.Prefetched)) {
// The Processor has been realized so the
// components can be layed out
c = processor.getVisualComponent();
getContentPane().add("Center", c);
c = processor.getControlPanelComponent();
if (c != null)
getContentPane().add("South", c);
System.out.println("button added");
// Start the Processor
validate();System.out.println("button added");
processor.start();
status = true;
} else {
System.out.println("Unable to realize the processor!");
return status;
protected boolean waitFor(int state)
// Make this block synchronized
synchronized(synchronizer) {
try {
while ((processor.getState() != state) &&
(transitionOK)) {
synchronizer.wait();
} catch (InterruptedException ie) {
// Ignore it
return transitionOK;
public synchronized void controllerUpdate(ControllerEvent evt)
if ( (evt instanceof ConfigureCompleteEvent) ||
(evt instanceof RealizeCompleteEvent) ||
(evt instanceof PrefetchCompleteEvent) ) {
// Synchronize this block
synchronized(synchronizer) {
transitionOK = true;
synchronizer.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
// Synchronize this block
synchronized(synchronizer) {
transitionOK = false;
synchronizer.notifyAll();
public void mouseMoved(MouseEvent e) {
//saySomething("Mouse moved", e);
public void mouseDragged(MouseEvent e) {
saySomething("Mouse dragged", e);
public void mousePressed(MouseEvent e) {
//saySomething("Mouse pressed; # of clicks: "
// + e.getClickCount(), e);
public void mouseReleased(MouseEvent e) {
//saySomething("Mouse released; # of clicks: "
// + e.getClickCount(), e);
public void mouseEntered(MouseEvent e) {
//saySomething("Mouse entered", e);
public void mouseExited(MouseEvent e) {
//saySomething("Mouse exited", e);
public void mouseClicked(MouseEvent e) {
saySomething("Mouse clicked (# of clicks: "
+ e.getClickCount() + ")", e);
xpos=e.getX(); ypos=e.getY();
void saySomething(String eventDescription, MouseEvent e) {
System.out.println("The Object is at the point "+"x ,"+e.getX()+ "y" + e.getY());
if(mark_flg==1){
mdetect.markObject(xpos,ypos);
//mark_flg=0;
public void actionPerformed(ActionEvent e)
if(e.getSource()==track)
System.out.println("track pressed");
processor.start();
if(e.getSource()==mark)
mark_flg=1;//processor.stop();
System.out.println("mark pressed");
public class track extends Frame
{ JDesktopPane desktop;
public track(String f)
setLayout( new BorderLayout() );
desktop = new JDesktopPane();
desktop.setDoubleBuffered(true);
add("Center", desktop);
setSize(640, 480);
capturing1 cap1=new capturing1(f);
desktop.add(cap1);
setVisible(true);
public static void main(String args[])
new track(args[0]);
/****************************** mdetect class**********************************************/
class mdetect implements Effect
//Processor processor;
static boolean marked=true; static int mark_flg=0; int a=1;
static int xpos=0,ypos=0;
private Format inputFormat;
private Format outputFormat;
private Format[] inputFormats;
private Format[] outputFormats;
private int[] bwPixels;
private byte[] bwData;
private RGBFormat vfIn = null;
private static int imageWidth = 0;
private int imageHeight = 0;
private int imageArea = 0;
static int[] p1;
mdetect()
System.out.println("mdetect called");
inputFormats = new Format[] {
new RGBFormat(null,
Format.NOT_SPECIFIED,
Format.byteArray,
Format.NOT_SPECIFIED,
24,
3, 2, 1,
3, Format.NOT_SPECIFIED,
Format.TRUE,
Format.NOT_SPECIFIED)
outputFormats = new Format[] {
new RGBFormat(null,
Format.NOT_SPECIFIED,
Format.byteArray,
Format.NOT_SPECIFIED,
24,
3, 2, 1,
3, Format.NOT_SPECIFIED,
Format.TRUE,
Format.NOT_SPECIFIED)
public Format[] getSupportedInputFormats() {
return inputFormats;
public Format [] getSupportedOutputFormats(Format input) {
if (input == null) {
return outputFormats;
if (matches(input, inputFormats) != null) {
return new Format[] { outputFormats[0].intersects(input) };
} else {
return new Format[0];
public Format setInputFormat(Format input) {
inputFormat = input;
return input;
public Format setOutputFormat(Format output) {
if (output == null || matches(output, outputFormats) == null)
return null;
RGBFormat incoming = (RGBFormat) output;
Dimension size = incoming.getSize();
int maxDataLength = incoming.getMaxDataLength();
int lineStride = incoming.getLineStride();
float frameRate = incoming.getFrameRate();
int flipped = incoming.getFlipped();
int endian = incoming.getEndian();
if (size == null)
return null;
if (maxDataLength < size.width * size.height * 3)
maxDataLength = size.width * size.height * 3;
if (lineStride < size.width * 3)
lineStride = size.width * 3;
if (flipped != Format.FALSE)
flipped = Format.FALSE;
outputFormat = outputFormats[0].intersects(new RGBFormat(size,
maxDataLength,
null,
frameRate,
Format.NOT_SPECIFIED,
Format.NOT_SPECIFIED,
Format.NOT_SPECIFIED,
Format.NOT_SPECIFIED,
Format.NOT_SPECIFIED,
lineStride,
Format.NOT_SPECIFIED,
Format.NOT_SPECIFIED));
return outputFormat;
public synchronized int process(Buffer inBuffer, Buffer outBuffer) {
int i=0;
a++;
//System.out.println("discard buffer"+inBuffer.isEOM());
//System.out.println("w n h");
//System.out.println("w"+size.width+"h"+size.height);
//System.out.println("format"+inBuffer.getFormat());
//System.out.println("RGB"+outImage.getRGB(3,3));
//Graphics og = outImage.getGraphics();
//og.drawImage(stopImage, 0, 0, size.width, size.height, null);
vfIn = (RGBFormat) inBuffer.getFormat();
Dimension size = vfIn.getSize();
if(inBuffer.isEOM()==false)
BufferToImage stopBuffer = new BufferToImage((VideoFormat) inBuffer.getFormat());
Image stopImage = stopBuffer.createImage( inBuffer);
BufferedImage outImage = new BufferedImage(size.width, size.height, BufferedImage.TYPE_INT_RGB);
if(a==6)
PictureButton.but(stopImage);
System.out.println("stop image called");
//cut
/*if(a<0)
for(int rr=0;rr<MAXROWS;rr++)
for(int cc=0;cc<MAXCOLS;cc++)
System.out.print(PixelArray[rr][cc]+" ");
System.out.println("@");
a=0;
int outputDataLength = ((VideoFormat)outputFormat).getMaxDataLength();
validateByteArraySize(outBuffer, outputDataLength);
outBuffer.setLength(outputDataLength);
outBuffer.setFormat(outputFormat);
outBuffer.setFlags(inBuffer.getFlags());
byte [] inData = (byte[]) inBuffer.getData();
byte [] outData =(byte[]) outBuffer.getData();
Object data = inBuffer.getData();
int pixStrideIn = vfIn.getPixelStride();
int lineStrideIn = vfIn.getLineStride();
imageWidth = (vfIn.getLineStride())/3; //Divide by 3 since each pixel has 3 colours.
imageHeight = ((vfIn.getMaxDataLength())/3)/imageWidth;
imageArea = imageWidth*imageHeight;
int r=0,g=0,b = 0; //Red, green and blue values.
System.arraycopy(inData,0,outData,0,outData.length);
bwPixels = new int[outputDataLength/3] ;
p1=new int[outputDataLength/3];int[] p=new int[outputDataLength/3];
for (int ip = 0; ip < inData.length; ip+=3) {
int bw = 0;
r = (int) inData[ip] ;
g = (int) inData[ip+1] ;
b = (int) inData[ip+2];
bw = (int) ((r + b + g)/ (double) 3);
p1[ip/3]=bw;
return BUFFER_PROCESSED_OK;
public String getName() {
return "Motion Detection Codec";
public void open() {
public void close() {
public void reset() {
public Format matches(Format in, Format outs[]) {
for (int i = 0; i < outs.length; i++) {
if (in.matches(outs[i]))
return outs[i];
return null;
public Object getControl(String controlType) {
System.out.println(controlType);
return null;
public Object[] getControls() {
return null;
byte[] validateByteArraySize(Buffer buffer,int newSize) {
Object objectArray=buffer.getData();
byte[] typedArray;
if (objectArray instanceof byte[]) { // Has correct type and is not null
typedArray=(byte[])objectArray;
if (typedArray.length >= newSize ) { // Has sufficient capacity
return typedArray;
byte[] tempArray=new byte[newSize]; // Reallocate array
System.arraycopy(typedArray,0,tempArray,0,typedArray.length);
typedArray = tempArray;
} else {
typedArray = new byte[newSize];
buffer.setData(typedArray);
return typedArray;
public static void markObject(int x,int y)
marked=true;
xpos=x; ypos=y;
/* int j =0, m=0,n=0;
int total = p1.length; int col = imageWidth; //int row = imageHeight;
int[][] twodim = new int[total/col][col];
System.out.println("p1 arr"+p1.length+","+twodim.length+"col"+col);
for(j=0;j<total;j++)
twodim[n][m] = p1[j];
System.out.print( twodim[n][m]+" ");
m++;
if( m ==col)
m=0; n++;
System.out.println("@"+n);
System.out.println("m"+m+"n"+n);*/
public int markObject()
//System.out.println("boolean mark called");
mark_flg=1;
return mark_flg;
/*****************************************end of mdetect class*****************************************************/
/*********************************** Image Icon class ****************************************************************/
class PictureButton extends JFrame implements MouseMotionListener,MouseListener{
static Image image;Icon icon2;JButton button2=new JButton("hi"); int[] pixels; Container content;
public PictureButton(Image img ) {
super("PictureButton v1.0");
setSize(200, 200);
setLocation(200, 200);
Icon icon = new ImageIcon(img);
JButton button = new JButton(icon);
button.addMouseMotionListener(this);
button.addMouseListener(this);
button.addActionListener(new ActionListener( ) {
public void actionPerformed(ActionEvent ae) {
System.out.println("Urp!");
content = getContentPane( );
content.setLayout(new FlowLayout( ));
content.add(button);
//content.add(button2);
public static void but(Image im) {
image=im;
JFrame f = new PictureButton(im );
f.addWindowListener(new WindowAdapter( ) {
public void windowClosing(WindowEvent we) { System.exit(0); }
f.setVisible(true);
public void mouseMoved(MouseEvent e) {
//saySomething("Mouse moved", e);
public void mouseDragged(MouseEvent e) {
saySomething("Mouse dragged", e);
public void mousePressed(MouseEvent e) {
//saySomething("Mouse pressed; # of clicks: "
// + e.getClickCount(), e);
public void mouseReleased(MouseEvent e) {
//saySomething("Mouse released; # of clicks: "
// + e.getClickCount(), e);
public void mouseEntered(MouseEvent e) {
//saySomething("Mouse entered", e);
public void mouseExited(MouseEvent e) {
//saySomething("Mouse exited", e);
public void mouseClicked(MouseEvent e) {
saySomething("Mouse clicked (# of clicks: "
+ e.getClickCount() + ")", e);
void saySomething(String eventDescription, MouseEvent e) {
int w=0;int ind=0;
System.out.println("The Object is at the point "+"x ,"+e.getX()+ "y" + e.getY());
int[][][] imagePixels = imageIO.loadImage(image);
final int MAXROWS = imagePixels.length;
final int MAXCOLS = imagePixels[0].length;
int[][] PixelArray = new int[MAXROWS][MAXCOLS];
pixels=new int[MAXROWS*MAXCOLS];
int cnt=0;
int pix=0,pix1=0;
for(int row=0; row<imagePixels.length; row++) {
for(int col=0; col<imagePixels[0].length; col++) {
for(int rgbo=0; rgbo<4; rgbo++) {
if((cnt<3)&&(rgbo<3))
w++;
pix=pix+imagePixels[row][col][rgbo];
cnt++;
else
{cnt=0;}
} // for rgbo
pix1 = pix/3;
pix = 0;
/*if(col<97)
{pix1=(byte)192;}*/
PixelArray[row][col] = pix1;
System.out.print(pix1+" ");
} // for col
System.out.println("@");
} // for row
System.out.println("pix arr"+PixelArray.length);
for(int ww=0;ww<MAXROWS;ww++)
for(int hh=0;hh<MAXCOLS;hh++)
pixels[ind++]=PixelArray[ww][hh];
image = createImage (new MemoryImageSource( MAXROWS,MAXCOLS, pixels, 0, MAXROWS));
System.out.println(" img added");
/********************************* end of Image Icon class**********************************************************/
this program will capture the video n play
if u click on the mark button processor will be stopped
u can click on the image and get the mouse co-ordinates
i have also got the pixel values of the current frame at which u had clicked the mark button..do some manipulation on the pixels to get ur stuff work
hope this will help u in some way
regards
sudha -
I can click on the "iPod Click Wheel Games" and it works, but NOTHING else. Any suggestions?
I was having this problem. The settings on my wireless router was set to hide my IP address so it wouldn't connect. When I changed that, I connected no problem. While this is annoying since I don't want my IP address to be out there, I just switch my router when I need to connect to the App/iTunes Store. Hope this helps. It worked for me.
-
I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!
The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4
Maybe you are looking for
-
Obiee 11g - Master/detail : How to initialize details ?
Hi gurus, I'm using the last version of obiee. I have a dashboard with master/detail. The master/details are working great when I click on cells. But I have some "initialization" problems. - master/detail with a prompt list on the master table a chan
-
Error in Webservice Call HTTP error (return code 404, message conn failed)
Hi We wish to call a standard EP7 webservice through ABAP. When we try to create consumer proxy , we get the following error. HTTP error (return code 404, message "conn failed") Message no. SPRX090 ==> Display Error Document If you want to generate
-
Display pop-up message in printed documentation - RH 10
Hi, Is there a way to display a pop-up message in PDF? For example, instead of creating a hyperlink to another section for the word "sample" I would like a pop-up message to display on the PDF if the user clicks or hover on the word. Tried this but o
-
Portal ESS use log / audit / control
Hi all. Is there any way to have a log of all the changes the user does on their own personal data?? A registry for each change of familiar data, bank information... Any change done through the ESS... Do you know anything about that??
-
I THINK I have imported videos from my iPhone to my MacBook Air. but can't find them anywhere - they are not in iPhoto - which is ridiculously complex and there seems to be no logic