Increase still image cache when working only with images?

I've been having hundreds of out of memory issues when working on a still image project. Thought it was solved but it hasnt.
If im working totally with still images (Jpegs, Tiffs and PSD's) should I increase the Still Image cache from its default amount? I have scoured the internet trying to find out what the Still Image Cache is but cant find an explanation anywhere.
I increased it this morning and all is well so far.....
Might this solve my problem.

The Still image cache is the amount of RAM assigned to the playback of the stills. That's what that slider adds... it should help to make it larger when you are working with a lot of stills. They are cached to RAM instead of being read from disk...
From the manual:
Still Cache: This specifies the amount of RAM used to hold still images for real-time playback. The still cache that is allocated is a percentage of the excess RAM allocated to Final Cut Pro, so adjusting the Application slider also adjusts the amount of RAM available to the still cache. The more RAM allocated to the still cache, the more still frames can be played back in real time in the currently selected sequence. If another sequence is opened, the contents of the still cache are replaced with stills from the new sequence. If there is no excess RAM available, this slider is dimmed.
Jerry

Similar Messages

Image caching. Loading only new images

we develop huge game and it takes some time to load on startup because of tons of assets. Once per week or 2 weeks it is updated to new version which might bring few new assets or update previous ones.
So now we are trying to find the way that will allow flash to load only new/updated assets and the rest to fetch from cache. But we haven't succeeded yet. Does anybody have any idea?

thanks for the responce. Unfortunatelly, my English is not perfect. You mean sending to flash (flashvars) a variable containing a set of images to load so those ones that are not in the list are to be taken from cache?

Image cache not working with Firefox and apex

Hi,
I'd like to cache all my images to save page rendering time and bandwidth because my images are all static and never change.
I use the John Scott's caching technique Link: [http://jes.blogs.shellprompt.net/2007/05/18/apex-delivering-pages-in-3-seconds-or-less/], in a few words this technique consists of adding a header line "Expires: date in the future" in the http response.
It works very well in IE, the images are cached and the same image can be accessed several times (within the same session or in different sessions) without issuing an http request to the server each time.
with Firefox it does not work, the same image is asked again and again to the server (i'm using FF 3.5 and APEX 3.2).
- Is it a date format problem? no, because when i type about:cache in FF, i can find my image in the cache with an expire date in the future.
The weird thing here is that the counter is incremented each time u request the image, so FF knows it is in the cache and even if the expire date is in the future, FF asks it again to the server.
- Is it a FF bug? If u read the http specs or if u google a little, u can come to the conclusion that FF does not follow the standards,
but... images.google.com for example manages to get its images cached with FF.
They use an http response header "cache-control: public, max-age=604800".
I tried the same and all kinds of combinations but without success.
When i compare my image with the one from google in the FF cache, they both have the same attributes.
- It's not an apex issue neither because it works with IE, most probably an incompatibility between apex and FF?
Maybe the use of cookie? or the http request (not the response) containing "cache-control: max-age=0"?
I've found so far 2 half solutions:
1) use ETag and modified date, see the Tyler Muth's note Link: [http://tylermuth.wordpress.com/2008/02/04/image-caching-in-plsql-applications/].
with this technique FF continues to send request each time but the answer is shorter because it's just a "304 not modified" instead of "200 OK" (200 response is bigger as it contains the image).
it's better than nothing but you still have 1 request + 1 response for nothing.
Another problem is that you need SYS access to implement this, which is not possible on an hosted server. (note that for images from the file system it is already foreseen by apex 3.1, Tyler's note is for images from the db)
2) if you preload the image (using myimage=new Image();myimage.src='...';), then there is max 1 request per browser session.
There are 2 minor issues here:
- no caching across sessions
- if u don't want to preload all the images (example a page with lots of thumbnails, when user clicks it show a bigger image, in that case the thumbnails can be preloaded but overkill for the big images), then you need to load the image, wait until the image has loaded before displaying it, it does not slow down the execution, but requires some extra JS.
I'm not asking anyone to investigate it, i can live with the 2 workarounds,
but just in case someone encountered the same problem and already fixed it.
Let me know if u managed to use the John Scott's technique with Firefox. (U can use Firebug to see the http traffic)
Thx
Tim

Hi Anshul, hope these help. Let me know if you need to see anything else.
Best,
Menu Settings:
Tab Hyperlink:
Label Text with with hyper link option not available (works as a hyperlink in chrome and IE though):
Thanks for the help in advance!

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

TCP works only with IP right?

TCP works only with IP right? Then if I want to communicate with a devise that does not have an IP (my television) I cannot use TCP right?
Regards,
Sim085

Why would I post without being 100% correct:
Just trying to point out at a high level that if you use something else to move the TCP then you'll eventually have to implement the functionality that IP gives you.
To those that insist that you HAVE to use IP to move TCP, the answer to that is NO! That's like saying that IP has to use Ethernet. You don't. All IP provides is addressing and routing.
An example of an IP alternative is TULIP: http://www.techiwarehouse.com/cms/engine.php?page_id=2b7e10ac
A network diagram that uses TCP and NO IP:
http://citeseer.ist.psu.edu/cache/papers/cs/4058/ftp:zSzzSzpaul.rutgers.eduzSzpubzSzbadrizSzitcp-tr314.pdf/bakre95itcp.pdf#page=5
(ejb, please refer to your own post about misinformation.)
The port is in the TCP layer. Sorry, wasn't thinking there. Actually what I was thinking about is how more expensive NICs can decide if it should look past the IP header of a packet. By being able to ignore IP addresses it is not assigned it can save CPU time. Checking to see if it should listen to a port would be cool too, but that would take too much. A machine will only have a few IP addresses (at least one in the class A,B,C range, maybe a multicast address, at least one broadcast address) which wouldn't take much to store in the NIC. Listening to 1000s of ports is not unheard of.
For the author:
I'd design your chat program with two basic interfaces in mind. There will be guaranteed delivery and best effort. TCP gives you a grantee that either the packet gets to the receiving station or the sender gets an error. That's great until you want to talk Bluetooth.
Bluetooth, IR, and Serial comms are all basically the same in the WinTel world. You talk to them over a COMM port. Here you have no guarantee of delivery. Thus in the old days of downloading you had to use a protocol like ZModem to transmit files and make sure you got them all.
You'll need to implement you own guarantee of delivery for these. Basically look into what TCP provides and implement something similar with Java. Checksum, sequence number, and acks.
When you implement your chat, part of your own "network stack" would decide if it needed to transmit service guarantee information with the data at the application level or not. There is no point in incurring the overhead if TCP is being used.
UDP may work, but I don't trust it past a LAN. Some UDP packets will always be dropped by a router. One example is broadcast packets. I doubt any admins will let a broadcast come into their router. Also, because viruses propagate by broadcasting, a lot of admins may limit them to the subnet of the host. UPD is real good for streaming audio. Something when if you lose a packet you don�t want to recover it. If you�re listening to a game on the radio and there is a lightning strike. Would you rather hear the pop and still be in sync with the broadcast or do you want to fall a second or two behind �live� coverage? I think that UPD packets are more readily dropped by a congested router. That's working on the theory that "If the application doesn't care about the packet really getting there (it would have used TCP) then why should I when I'm too busy."

Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

M200: Processor works only with 600MHz - Why?

I have observed that when you change pcb set for a laptop irrespective of the processors speed it runs at slowest that is 595/598 MHz.
Have you observed this? What is the reason behind?
What is the solution?
If the processor is having 256MB/512MB RAM this things wont affect a large but for 1GB & 2GB the machine performance become very problematic.
I have tried updating DMI this didnot helped.
Re-installing os also didnot helped.
BIO upgrading also didnot helped.
I'm also not very sure about this problem having any relation to pcbset change.
With the good machine I have found the way is dynamically switching capabilities of a processor from bios.
In few machines that are giving problems i didnot observed this option in BIOS.
The machines are PortA200 & Port M200(tablet).
can any one help me. I need to justify this to customer.
Thanks & Regards
ChaitanyaN

Hi
This issue occurs after motherboard changing. Usually after mainboard changing it is very important to make any tests and diagnostic procedures. Without this procedure the CPU will work only with fixed 600 MHZ.
You should contact the Toshiba service to solve this CPU issue.
PS: This theme was discussed here in the forum. Please check this:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8492&messageID=29400#29400
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4351&messageID=14808#14808

There is no sound in my ipad 3 , It works only with my headphone

There is no sound on my ipad 3 , It works only with my headphone. I will try everything reboot several times .

Are you turning up the volume after you take the headphones out? The iPad will remember two different volume settings, one with headphones and one without.

My iphone 5c the sound doesn't work only with earphone.

my iphone 5c the sound doesn't work it works only with earphone.

Hi there lavodette,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.

Is there anything like smartbookmarks on mozilla newest version, because the smartbookmars tool works only with mozilla 3,6?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/806366]''
Is there anything like smartbookmarks on mozilla newest version, because the smartbookmars tool works only with mozilla 3,6?

The Smartbookmarks page refers to this add-on in its place:
https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/
I have no idea if it's basically the same or anything about its reliability.

PCG works only with Oracle EBS?

Hi, Does PCG work only with Oracle EBS? Does it not work with other products like Peoplesoft, SAP, Siebel?Thanks, Varsha

That's correct. PCG is only for Oracle EBS.

Pavillion dv6-3216us win7 clone hard drive worked only with HDClone 4.1

Pavillion dv6-3216us win7 64bit clone hard drive worked only with HDClone 4.1 tried many others that seemed to work but not boot.
cloned to WD 750 GB took about 2.5 hours

The originals were over 3 yrs old low end consumer models and 'due' for retirement to less frequent backup duties.
The Black or Blue Caviar 640GB costs slightly more but also 10-15% faster.
I wouldn't worry about temps, but I would monitor them, and if necessary boost the fans 200-300 rpm to help out.
Make sure everything is SL versions now (DW 4.2).
Normally I zero a drive and reformat more than others, and definitely with new OS.

How to get the full image directory when i upload the image to web page???

hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..

There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html

Error message: incompatible image size when using IMAQ in image processing

I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

Hello,
Which particular VI is outputting this error? Did you try larger border sizes (5,7)? What is the exact error code and error string?
Regards,
Yusuf C.
Applications Engineering
National Instruments

Error message: incompatible image size when using IMAQ in image processing

I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

A couple things might be causing this problem-
1) The convolution matrix is bigger than 7x7, or
2) You have created an image, but there is not yet anything in the buffer
You can check number 2 by doing a winDraw window just before you do the convolution.

Increase still image cache when working only with images?

Similar Messages

Maybe you are looking for