INPUT textfield does not show non-English letters with transparent mode

INPUT textfield does not show non-English letters when i
type, if transparent mode turn on
this is bug of Flash Player 9?
will this bug had be fixed?

I just tested Firefox and Chrome on linux, i doesn't work either, but i get different weird chars: Ã©Ã¨Ã§a
However, on both mac and linux, if i copy the chars and paste them in the input field, it passes.

Similar Messages

Only VBA does not recognize non-English characters

Hello guys,
I have a new laptop with Windows 8.1 bought in the USA and I'm having a difficulties with Excel VBA (Office 365 University-64x bought in the Czech Republic - Central Europe). The VBA does not recognize non-English characters (particularly "ř" and
"ů") which causes me problem when running some codes that I wrote earlier on my previous laptop (Windows 7, bought in the Czech Republic with the same Office).
The problem with non-English characters has occurred only in VBA so far, otherwise I can use these characters normally in Excel cells, Word... I tried to install both English and Czech version of the Office with no change, I also installed Czech proofreading
tools and set everything to Czech in the Office. The location and language preferences in the Windows are also set up to Czech. And it is not a problem of a font. I also mentioned that when I tried to look up these characters, using Ctrl+F, it changes
original ř to r after a search and again this is only an issue of the VBA.
Thank you very much for any help.
Tom

Hi Tom,
VBA for Excel can only recognize ASCII code from 0 to 255, if you use other special characters like "ř" or "ů", it will returns 63(?) to you. To use this kind of characters, you have to utilize ChrW function to parse a decemal to the
character.
http://msdn.microsoft.com/en-us/library/ee177465.aspx
for example, the hex code and dec code for these two characters are as below:
Hex   Dec
ř 159   345
ů 016F 367
So to get these two characters in VBA, you could code as below:
ChrW(&H159) or ChrW(345)
ChrW(&H16F) or ChrW(367)
You can get the hex code of the character by searching in the system character map(in the Win8.1 start view, search "character map"), then convert the hex code to decimal code by yourself.
Range("A1").Value = ChrW(&H159) & ChrW(&H16F)
Range("A1").Value = ChrW(345) & ChrW(367)
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

VBA does not recognize non-English characters

Hello guys,
I have a new laptop with Windows 8.1 bought in the USA and I'm having a difficulties with Excel VBA (Office 365 University-64x bought in the Czech Republic - Central Europe). The VBA does not recognize non-English characters (particularly "ř" and
"ů") which causes me problem when running some codes that I wrote earlier on my previous laptop (Windows 7, bought in the Czech Republic with the same Office).
The problem with non-English characters has occurred only in VBA so far, otherwise I can use these characters normally in Excel cells, Word... I tried to install both English and Czech version of the Office with no change, I also installed Czech proofreading
tools and set everything to Czech in the Office. The location and language preferences in the Windows are also set up to Czech. And it is not a problem of a font. I also mentioned that when I tried to look up these characters, using Ctrl+F, it changes
original ř to r after a search and again this is only an issue of the VBA.
Thank you very much for any help.
Tom

Hi Tom,
I would suggest you post the question in the forum of
Excel for Developers as your query is directly related to VBA. Here we mainly support Office client side issues:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My iPad does not show me iTunes Radio with the new iOS 7 update

My iPad does not show me iTunes Radio with the new iOS 7 update

Hi, Abhishek642.
Thank you for visiting Apple Support Communities.
If you are a U.S. customer try forcing all applications to close and power cycle the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, try signing our of the iTunes & App Store on the device and signing back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
For more information on iTunes Radio and it's availability, see the article below.
About iTunes Radio
http://support.apple.com/kb/HT5848
Cheers,
Jason H.

Why MSAccess database shows data but does not show columns and DDL in edit mode in jdeveloper?

Sir,
My developer ver is 12.1.3.0.0.
I create a connection to MS Access database, this database shows data as bellow in jdeveloper databases window
But when I open any table in Edit mode like bellow it does not show any columns and DDL and give an error like bellow
Similarly when I try to create view objects on these tables then on data controls the view object also doesn't show any columns like bellow
What could be the reason any help on this issue
Should I use MS Access or not but I want to use ms access for very small databases.
Regards

If you look into the certification matrix at Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems
You'll see that ms access is not supported.
You can use oracle xe which is free for your project.
Timo

LightRoom 2.3 Does not show up in "open With" when image right clicked..Why?

Hi,
I noticed that when I right click on an image and highlight OPEN WITH LightRoom does not show up as a choice.. Just CS4 and other programs. Is there a way to get it to show up?

You can do it. Right-clicking and "opening with" LR is no different than dragging a file from Windows Explorer into the grid view. In either case the import dialog will be launched. If it's already in the catalog you'll get that dialog.
Windows is seemingly unpredictable from time to time as to adding file associations to the context menu. In any case, if you go to the bottom and click "choose program" you can select LR from the expanded list, or navigate to find it if necessary (which shouldn't be necessary).
Typically once you choose it once, it will continue to appear in the short list for that file type, though it depends what new pieces of software you install and how they're associated with file types either upon or after installation.
You can also drag the file(s) from your Explorer window into the grid view, or drag onto the LR icon on your desktop or in your quick launch, which will launch LR and bring up the appropriate dialog.

Import filter for Pagemaker does not support non-english charcters in references

Hi all,
we found that when importing from Pagemaker, all referenced images that contain non-english charcters (such as German umlauts) in their file names are lost. Apart from this, the direct import works quite well for us, therefore we would like to use this workflow if we can find a solution for the lost images. In some chapters, 95% of the images are imported correctly, in others almost all are lost.
Is there anything we can do about this? If we rename the images (exchange problematic characters by fixed string), is it possible to correct the references in PM with some sort of search&replace function? These are really a lot of images, so doing it manually would be a bad option.

I found out how to do it.
For the benefit of others who might encounter this or similar filename issues, it would be nice to know the root cause.
On what operating system (and when) were the filename originally created?
(and what version of PM was used)
On what OS, and with what version of FM are you trying to import the PM file?
I presume that there is no issue with the filenames per se under the OS, but just during FM import?
My guess would be that PM is using some legacy encoding for references to file names that include extended latin characters, and that encoding does not translate at FM import.

Is this a bug in VGB? The VGB analyze not work, it does not support non-English Path.

A clip in path
containing
non-English
directory like Chinese, When I analyze it, I have get nothing, the Ouput report SUCCESS, the Control show 'Frames:0 Worst Error: 0 Average RMS：0 False Positives:0 False Negatives :0', no green
curve,.
After I move the Solution and clips to a No
non-English
directory, the VGB analyze is work. The green curve of clip is appear.
NuGUNDAM

That is a known bug and no fix at this time. You will need to use your workaround that you said works.
Carmine Sirignano - MSFT

HT204053 2nd SD Card does not show up on desktop with out Restarting computer.

I have iMac. I use 2 sets (A1-A2 and B1-B2) of dual SD cards for 2 videography cameras. A1 and A2 are identical. B1 and B2 are identical. Initally all SD cards showed up on desktop. They erased in Disk Utility when I'd downloaded the data. Then suddenly w/ no changes to computer or software, only 1 card would show up when I inserted it into the SD slot. If I insert 2nd card, nothing showed up on desktop, in finder or in disk utility. BUT, if I did a Restart, with the 2nd card in the slot, when the computer came back on, behold, there it was. I downloaded the contents, erased it in disk utility. I need to erase 4 32 Gb SD cards and erase them. I'm currently rebooting 3 times to accomplish this. It's a HUGE HUGE time sink to do this every time I want to download from cards. What's going on with the rebook solution? and how can I get back to better functioning? Solutions please. Thank you.

Are you using the USB cable that came with the shuffle? The 2nd gen shuffle uses the USB cable with a mini-dock at the shuffle end. The USB cable for the 3rd and 4th (current) gen shuffle does not work, because the connector is different.
If you are using the correct USB cable... The shuffle will not continously appear on the Mac's desktop unless it is set to Enable disk use. So "does not appear on desktop" may be OK.
It should appear in iTunes. The latest version of iTunes may hide the sidebar. To show the sidebar, from the iTunes menu bar, under View, select Show Sidebar. With the sidebar visible, the shuffle does not appear under DEVICES in the sidebar when connected?

Registry-based discovery does not show non key property value

Hi,
Discovered Inventory shows instances of my new class correctly, but the non key property ServerType appears but has no value. I have confirmed each instance does have the registry value populated. What can I do?
I see the following Event 31876 on one of the clients:
Data item returned no information for parameter '$Data/Values/ServerType$'
This usually indicates that the query is incorrect.
Detailed Background:
My custom application is made of 8 different computer roles.
HKLM\SOFTWARE\Vendor\Appname exists = true indicates an instance of my app.
HKLM\SOFTWARE\Vendor\Appname\ServerType indicates the actual server role.
I want an initial hosted class (VendorServer) based on Microsoft.Windows.Computer base class to contain all server roles.
Then I will create 8 hosted classes (VendorServerRoleA, VendorServerRoleB, etc) for each server role based on the initial hosted class (VendorServer).
My discovery for VendorServer class created instances, and I see ServerType as a property in Discovered Inventory, but it is blank for all instances. Should I expect to see ServerType populated where I mapped it as follows:
Name =
$MPElement[Name="MPName.VendorServer"]/ServerType$
Value =
$Data/Values/ServerType$
Does $MPElement need to reference the discovery object instead of the class object (which it currently does)?
I started with a blank MP and then create the new VendorServer class based on Microsoft.Windows.ComputerRole and added the new Property, ServerType as a non key property.
The discovery targets Microsoft.Windows.Computers. Is it ok to have the discover target one class and the VendorServer class have a different base class?
My build event was simply if HKLM\SOFTWARE\Vendor\Appname exists
I am hesitant to proceed to create my VendorServerRoleA class based on HKLM\SOFTWARE\Vendor\Appname\ServerType=AAA until what I have built so far works completely, unless it is not expected to do so.
A related question. Once I have classes for each server role, can I target monitorA at multiple classes, or do I need to create a new monitor for each class?
This authoring learning curve is so steep as I am sure many of you already know. MUCH thanks for help...

<ManagementPack ContentReadable="true" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack</ID>
<Version>1.1.1.1</Version>
</Identity>
<Name>Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack</Name>
<References>
<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" Accessibility="Internal" Abstract="false" Base="Windows!Microsoft.Windows.ComputerRole" Hosted="true" Singleton="false">
<Property ID="ServerType" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC" Accessibility="Internal" Abstract="false" Base="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" Hosted="true"
Singleton="false" />
</ClassTypes>
</EntityTypes>
</TypeDefinitions>
<Monitoring>
<Discoveries>
<Discovery ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServer" Enabled="true" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" />
</DiscoveryTypes>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
<ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<RegistryAttributeDefinitions>
<RegistryAttributeDefinition>
<AttributeName>KeyExists</AttributeName>
<Path>SOFTWARE\Thales\IFSBOSystem</Path>
<PathType>0</PathType>
<AttributeType>0</AttributeType>
</RegistryAttributeDefinition>
</RegistryAttributeDefinitions>
<Frequency>300</Frequency>
<ClassId>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]/ServerType$</Name>
<Value>$Data/Values/ServerType$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
</Settings>
</InstanceSettings>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Values/KeyExists</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">true</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</DataSource>
</Discovery>
<Discovery ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServerCDC" Enabled="true" Target="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" ConfirmDelivery="false" Remotable="true"
Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC" />
</DiscoveryTypes>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<RegistryAttributeDefinitions>
<RegistryAttributeDefinition>
<AttributeName>ServerTypeCDCTrue</AttributeName>
<Path>SOFTWARE\Thales\IFSBOSystem\ServerType</Path>
<PathType>1</PathType>
<AttributeType>1</AttributeType>
</RegistryAttributeDefinition>
</RegistryAttributeDefinitions>
<Frequency>300</Frequency>
<ClassId>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]/ServerType$</Name>
<Value>$Data/Values/ServerType$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
</Settings>
</InstanceSettings>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Values/ServerTypeCDCTrue</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">CDC</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</DataSource>
</Discovery>
</Discoveries>
</Monitoring>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack">
<Name>Thales IFS Subsystem Discovery Monitoring Management Pack</Name>
<Description>The purpose of this management pack is to monitor the health of various components of the Thales IFS subsystem servers including server types CDC CRD DC MWS PMS and SUP.</Description>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServer">
<Name>Discover IFS Subsystem Server</Name>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServerCDC">
<Name>IFS Subsystem CDC Server</Name>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer">
<Name>IFS Subsystem Server</Name>
<Description>CDC CRD DC MWS PMS SUP</Description>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" SubElementID="ServerType">
<Name>ServerType</Name>
<Description>CDC CRD DC MWS PMS or SUP</Description>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC">
<Name>IFS Subsystem CDC Server</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
</ManagementPack>

Bpc input schedule does not show all data

Hello gurus, i have i question, a bout the following situation: i am using SAP BPC 7forNW , and i am creating an input schedule , it has account and entity, so i capture several values and then send data, and then appears a message , like this "all values were sent ,zero failed."
But, at the end, only a few of the sent values are shown, several of them disappear with no pattern, and in BI7 all of them appear correctly
What can i do in order to show all of the values that were caprtured in that input schedule?
Best regards

Hi,
The easiest thing you can do is that just remove some of the data from excel cell and "Refresh and expand" the Input schedule after you send the data to see whether you get the data correctly.
Sometime refresh more than once and see you get the data.
Optimise the application as well.
Hope it helps
Raman

When a mail is printed, the pdf version does not show "t" and letters next to it. WHY?

Happens regularly.

my guess is their is either something wrong with the PDF creator or the font in question is corrupted on the hard disk.

HT5429 map does not show only the pins with no street view or labels

The map details on my map appliction has disappeared. When I search for a location the pin shows up with no street view detail just a yellow background screen

Have you solved the issue?
The same thing happens to me. The map details are gone, I just see the pin on a blank background. It happens on apple maps, google maps, waze, garmin. I zoomed out and the maps shows that im in Nigeria which is about 5000miles away from me
Ive checked my location, tried checking on wifi and nothing worked.

Slideshow from iphoto does not show in firefox/safari (only mac mode)

hi there,
i have a problem:
i have created a website in iweb '08 and everything works fine, except the slideshow.
i have exported a slideshow from iphoto as a quicktime file. i have placed this slideshow in my website.
it is shown once only when opened in firefox or safari and then never again. if i change to windows, i have no
problem, it is shown in both firefox (for windows) and IE without any trouble.
does anyone know how i can fix this problem? and why is it mac related but works fine in windows?
i would be soo grateful for any suggestions!
thanks!

What's the URL of your site so we can examine it first hand?
OT

IPhone 4 charging, can sync but does not show it.

Yeah it does everything, but it doesn't vibrate or makes the charging sound, and I tried it on both my computer and using the ac wall plug. And it does not show the battery charging in lock mode and the little small battery in the upper right left stays the same....
What should I do?????

Help anyone?????
Message was edited by: Casual20

INPUT textfield does not show non-English letters with transparent mode

Similar Messages

Maybe you are looking for