Inventory 0RECTOTSTCK Key Figures

Hi All !
In the extractor 2LIS_03_BX, we have a field BWMNG which is mapped to 0CPQUABU. In the update rule 0RECTOTSTCK is mapped to 0CPQUABU. But its not populating data. No routine...no formula.
Any hint?
With Regards
Rekha

Maintain entry 'NDI' (text: New dimension integration) and u2018BWu2019 and the flag Active. We have transaction FIBF available, with which you can branch to the table via the menu option Settings -> Identification ->SAP applications.
Transaction BF11:
Set the flag as active for application component BW & NDI
In some scenarios, if this activity is not performed, it creates problems while loading data. If we proceed with the loading activity without performing the above steps, records are transferred but no records are added in the cube.
Because of the application component BW is not maintained in BF11 tcode,it will not bring data for all BW fields.
Please do those in ECC and they try to load again.

Similar Messages

Populate key figure attributes values for material & location in inventory

Hi all,
We have a Inventory Infocube. the dimensions of the inventory infocube contains material, location and material-location and also the time dimension with calday, week and month. The different key figures in the infocube are Unrestricted Stock Balances, Unrestricted Stock Receipts, Unrestricted Stock Issues, QI Stock Balances, QI Stock Issues, QI Stock Reciepts, Blocked Stock Balances, Blocked Stock Receipts, Blocked Stock Issues. The following is the definition for master data objects
Material Master - ATTRIBUTES :- Business Unit, Manufacturing Plant, Base to Case Conversion Factor(key figure attribute)
Location Master - ATTRIBUTES:- City, State, Country, Location Type
Material Location master - ATTRIBUTES:- Material, Location, MRP Controller, Source Location, Standard Cost(key figure attribute)
We have a report with material, location, calender day and with all the stock balances keyfigures. also in the report we have the key figure attributes of material master and material location (like standard cost and base to case conversion). We have defined a formula variable on these attribute key figures with replacement path.
The problem is none of the records are getting populated with the standard cost and base to case conversion.
We are NOT doing any conversion at the report level.
Any help is greatly appreciated.
Regards
Vijay

There could be few possibility:
1. The variable you are inputting for standard cost and base to case conversion may not have any values in the master data.
2. See the master data table for Material and location. Note down those materails and location for which there are values for standard cost and base to case conversion. Now, run the reports for these materials
and location.
Btw, have made standard cost and base to case conversion as nav attributes. Plz make them nav attributes and see.
Thanks...
Shambhu

Snapshot scenario or non cumulative key figure in inventory management

Hi
We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100 000 stock movement lines per day (we are retailer!).
Is there somebody to give me advice about it?
Tanks a lot
Anne

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Snapshot Inventory Management with Cummulative key figures

Experts,
We are implementing the snapshot model in parallel with the Daily cube. When trying to create the update rules from 2LIS_03_BX, we get a warning message saying 2lis_03_bx is setup for noncummulatives only followed by an error stating that there are no key figures in the cube.
How do we circumvent this issue?
All thoughts appreciated!

Pls go though below link which will help you to implement snapshot Inventory " How to handle Inventory"
https://websmp108.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002121282004E
Regards
Sangita

Inventory key figure diffrent date filters

Hello Experts,
We have a report on Inventory Management where we have lots of diffrent key figures, we are executing report either on Calendar day or Calendar month. If we execute the report for one CALMONTH then output comes for one complete Calendar Month.
Now there are two KF 1. Inventory On hand and 2. Morgue Inventory, for these two key figures user wants to see the data from the inventory initialization to entered CALMONTH or CALDAY in filter.
Please guide me to handle this requirment which is specific to two keyfigures.
Regards,
Chandrakant.

Hi Durgesh,
I have two golbal filters,
1. Calendar Date
2. Calendar Month
Currently report is working based on filter condition, if user has enetered 12/2010 in Calmonth filter, then user will able to see the stock details for that perticular month. Thses filter is applied for all the keyfigures.
Now the requirment is:
If stock initialization month is 01/2008, for two keyfigures i.e. Inventory on hand and Morgue Inventory user wants to see the data from 01/2008 to 12/2010 (which is global filter value).
Please let me know if you need more information.
Regards,
Chandrakant

Non Cumulative Key Figures - Standard Inventory 0TotalStck

The key figure 0TotalStck is non cumulative and is calculated at query runtime, does anyone know a report or function module that would be used to calculate the value? Thanks

Hi Niten,
Not sure what do you meant. Did you need a query where 0totalstck is calculated. If so, then check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/10/0092fd7bdc7741a26becc772300cbd/frameset.htm
If you wanted to know how non-cumulative KF are calculated then check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Hope this helps.
Bye
Dinesh

What is diffrernce between key figures and characteristics?

Hi all,
I am a newbie to SAP BI....i am doing Masters in ERP(SAP)....I have confusion about what is basic difference between key figures and characteristics?
Why do we have to define attributes in characteristics?
If any one can refer me a thread that answers my questions or explain with very lucid example I will highly appreciate it.....please answer this question as I have just spend 4-5 months studying BI and have not really implemented in the Industry but we do have access to SAP BI where we perform tutorials....
Also please let me know the links to materials where basics of BI are explained in a very simple way.....
Thanks,
Regards,
Rahul

KF is anything which can quantitatively measured: Amount, Number, Value, Price... whatever you want to measure is called Key Figure. This key figures are also called KPI (Key Performance Indicator). If you want to know the number of sales orders, the number of deliveries, the amount of deliveries... all are key figures
And to add to that, key figures are also divided into two:
Cumulative KF: Like I said, amount, value, price
Non-cumulative KF, this is different kind of key figures which shouldn't be summed up, for example: Age, Inventory, Number of Employees. When you measure this key figures, you don't add the age of every body, because that doesn't make any sense, but adding the sum of all deliveries, or adding all Sales does make sense, that is the difference between the two key figures.
Characteristics: are anything which couldn't be quantitatively measured: material, customer, plant, employee ID and so on...
Aways, in BI you measure the KF against the Key figures..
thanks.
Wond

Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,

Hi..Guru's
Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.)
I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump )
I have tried lot on to create aggregate by using proposal from query and other options. But its not working or using that aggr by query.
Can somebody tell me about any sample aggr. which they are using on 0ic_c03.
Or any tool to get better performance to execute query of the said cube.
One more clarification req that what is Move the Marker pointer for stock calculation. I have compressed only two inital data loading req. should I compress the all req in cube (Regularly)
If so there would be any option to get req compress automatically after successfully load in data target.
We are using all three data sources 2lis_03_bx,bf & um for the same.
Regards,
Navin

Hi,
Definately the compression has lot of effect on the quey execution time for Inventory cubes <b>than</b> other cumulated cubes.
So Do compression reqularly, once you feel that the deletion of request is not needed any more.
And ,If the query do not has calday characterstic and need only month characterstic ,use Snap shot Info cube(which is mentioned and procedure is given in How to paper) and divert the month wise(and higher granularity on time characterstic ,like quarter & year) queries to this cube.
And, the percentage of improvement in qury execution time in case of aggregates is less for non cumulated cubes when compared to other normal(cumulated) cubes. But still there is improvement in using aggregates.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Key Figure doubles in value when loaded to data target

I have added a key figure to a copy of the standard inventory cube 0IC_C03. When I load the key figure it has the correct value in PSA but doubles in value when loaded to the cube. The mapping is one to one, why is this and how can I resolve? Thanks

Hi,
You might have done compression for BX and BF LOADS with MArker update
or
you have not yet done compression at any request.
With rgds,
Anil Kumar Sharma .P

After activation of atandard business content key figure is not visible

Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modi

Hi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM

BEx report -two different calculations for a result for one key figure how?

All,
Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
Here is an example:
location     product          inventory
AAAA     11111          5
AAAA     11111          5
AAAA     11111          10
AAAA     11111          10
AAAA     Result          7,5      ---> average
AAAA     22222          5
AAAA     22222          6
AAAA     22222          7
AAAA     22222          8
AAAA     Result          6,5       -
> average
AAAA     Result (across products)          14      ---> here I want to have a sum of averages

This could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.

Passing Char Values to Key figure

Hi All,
I have one issue for Inventory cube.
Every thing is fine with the cube, every thing is fine. since i wanted Last usage date i have enhanced the data source and the date is coming to cube well.
Since i dont want to put the Date as charecter , i wanted to pass the values of dats(char) to dats(kfg).
For example : 0APO_DAT this is char date since i need to pass the values to 0GIDATE(kfg). i mapped directly in the transformation level.
Now the problem is i am getting some dates very well, where ever some cancelled documents(dont know exactly) There the dates are coming as 05/17/4017 instead of 03/09/2009.
can any one Help me out
Regards
Ram
Edited by: Ram on Mar 10, 2009 10:34 PM

Ram,
Could you please check key figure to check what aggregation level it has. It should have Max and make sure that same aggregation level exist in your transformations.
Regards,
Pravin

Purpose of Non Cumulative key figures

Whatu2019s the purpose of Non Cumulative key figures?

Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

How to use a non cumulative key figure in a multi planning area

Hi
I'm new to bps, my problem is
I need to read the last stock quantity and value at plant and material level to do further calculations in a fox formula, so i made a planning area for the cube 0rt_c36 and another for my tc cube where the results should go, then i combine these areas in a multiplanning area.
problems arise when selecting the key figure in the ratios tab of the multi area, the ratios 0CPTOTSTOBU (last stock) and 0CPTOTSTOPV (last stock purchase value) are not available, only the inflow and outflow ratios are 0CPTOTREBU and 0CPTOTREPV.
I know when reporting, the actual value for stock is calculated by bex, namely, there is no data store at database level, so the question is:
How to obtain last stock for using in bps??
thank you for any help
regards
A. Garduñ

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Inventory 0RECTOTSTCK Key Figures

Similar Messages

Maybe you are looking for