IP19- Graphic Scheduling Overview and Simulation# Issue.

Dear All,
Good Day,
I have run transaction IP19 for a perticular Maintenance plan and I did "Release Call"
by clicking relevent icon. Its changend in Green Color ("CALLED ICON") also I saved
the same.
When i checked related Maintenance plan, it dosen't have released scheduled.
But when i do through IP10 its getting released by cliking Green Flag.
Please suggest me what could be the reason for the IP19 Issue.
Best Regards,
KSK

HI Suresh
TCODE IP19
Enter your Equipment in the input field.
Execute
Then, Select your plan from the Equipment. It will display the Scheduled Call objects
Select it and click Release Icon
You will get the order no.
Go to ip10...
select the scheduled object, it will be displayed "called"
Select the called object and click display (to display the order)
You cannot release the order twice
- pithan

Similar Messages

XPS 8500 compatible graphic card installations and avoiding video BIOS issues

I see several threads looking for XPS 8500 video card upgrades that can be used with the stock 460w PSU or upgraded PSU. However, in upgrading the GPU for this machine, there are some cards that will not be compatible and will result in a black screen.    Even with a proper video card install, an adequate and/or upgraded power supply , the video card fans will be working, but there will be no video.   The problem lies in the BIOS for the XPS 8500 motherboard not recognizing the video card and this is a known issue that has carried over from the XPS 8300 to the current XPS 8500.
There have been vidoe BIOS upgrades from some card makers to correct this problem for certain cards, but there are a lot of legacy cards that won't work. Safest bet would be to use a newer card with the PCI 3.0 spec.
In the sticky in this forum a link to the current Dell drivers shows the following video cards that are supported with drivers for Windows 8:
Video
GeForce GT 545 | GTX660 | GTX555 | GeForce GTS450 | GeForce GTX 590 | GeForce GTX 460 | GTX680 | GeForce GTX 580 | GeForce GTX 560 Ti | GTX 480 | GTX690 http://downloads-us.dell.com/FOLDER00753042M/3
Geforce GT 620 | Geforce GT640 | nVidia GT640 http://downloads-us.dell.com/FOLDER00736734M/3
AMD HD7570 http://downloads-us.dell.com/FOLDER00746666M/6/
Radeon HD 6990 | Radeon HD7870 | Radeon HD 6950 | Radeon HD 5870 | Radeon HD 6770 | Radeon HD 5970 | Radeon HD7770 | Radeon HD 5770 | Radeon HD 6870 | Radeon HD7950 http://downloads-us.dell.com/FOLDER00749652M/3
Since these are Dell OEM cards that are being supported, there are also manufacturer specific issues where a given video card model may or may not work depending on its configuration. Whereas a XFX HD 6870 will work in the XPS 8500, the same card made by another manufacturer may not work.
Please keep this in mind when doing GPU and PSU upgrades and hopefully BIOS upgrades in the future will address these issues.
It would be helpful if you have a SPECIFIC card that does or doesn't work, to post the manufacturer and complete model number in this thread.
OS and Bios information also would be helpful, and if you are using the Dell PSU or an upgrade power supply. Specific model please!
Edit:
Please include following and any other helpful information
Graphic card manufacturer and model number:
Bios:
Operating System:
Power supply manufacturer if not Dell 460w PSU :
Compatible: Yes or No
Original card with system that worked:

I just installed a GTX 970 into my Dell XPS 8500 (Win 7 Pro-64bit) with out issues on the first try.
These were the parts:
Updated my XPS 8500 Motherboard Bios to version "A12" while waiting for my parts to arrive
EVGA NVIDIA GTX 970 Superclocked Graphics Card (EVGA 04G-2974-KR)
EVGA SuperNOVA 750B1 750W Power Supply (PSU) (110-B1-0750-VR)
Note, that I choose the "Back Blower" version of the card rather than the double fan ATX 2.0 version. That's because the case design of the XPS 8500 doesn't have "Great" circulation.   The "Reference" style (Solid video card shell with a single fan -- that draws air in from the case in... and vents out the back of the PC) is better suited to the XPS.
Putting a new Powersupply into a Dell XPS 8500 is a bit of a trick.   All ATX Power Supplies have about the same Height and width (150mm or 5.09" wide) and (86mm or 3.38" high).    The problem is the Depth.   How deep into your PC can it reach (extending towards the back side of your CD/DVD).   Don't forget, you have that tiny sunken USB/Headphone jack -- midway on the case top. That port has cable poking on the underside:
I did some measurements, and realized that the MAX PSU depth that would work would be about 165mm or about 6.5".     That's tricky because I wanted a 750w plus power supply, and its REALLY, REALLY hard to find a good power supply under with less than (180mm / 7.09").   And, that wouldn't fit.
You should also note that the PSU has is recessed, so you actually have to "Drop it in" about an inch from the back of the case, and then slide it back. The PSU also lower than the motherboard (when the case is on it's side), so you can't angle it very much:
To get it in, you may have to push some of the cables from the "Top Breakout Port" flat against the "Top inside portion" of the case to give you a little room. Dropping the PSU into place took me about 4 tries (lowering it... then seeing which cords were in the way... pulling it out... rearranging and retrying) to get it to slide home to the back of the case.    After it was in, I waited until I had everything wired before putting in the 4 PSU screws to mount it permanently into place.
I scoured every 700+ Watt, 80+ certified PSU carried by Newegg (as of 12/1/2014). Then, I cross checked the newegg specs for each prospect with the manufacturer's website for verification. I only focused on PSU's with at least 8 reviews, and then only if they averaged a 3.5 rating (unless the low ratings were for frivolous things like rebates).
After looking up the specs on over 200 PSU's (over a 5 hour period), I only came up with 5 potentials:
EVGA SuperNOVA 750B1 $69.99
RAIDMAX RX-1000AE 1000W $119.99
SeaSonic SS-750KM3 750W $139.99
CORSAIR AX series AX760 $159.99
Coolmax 1200W ZPG-1200B $282.35
I'm not certain that I absolutely NEEDED to put in a new power supply. The Dell shipped with a 470 watt PSU.   The EVGA GTX 970 is rather efficient (compared to other cards) and apparently only draws about 175watts.    The calculations were close because I have the SSD, 3 hard drives and a DVD.   In the end, I elected to switch out the power supply for $69.99.   The machine is 2 years old, and has been on 24/7 for almost 26 months.    Plus, (as I discovered later) the new PSU has a bigger fan and vents heat more efficiently.
When hunting for a PSU, I want to reiterate why you MUST ensure that any PSU you get is 165mm or less in depth, and you can't tell anything by looking a a particular series. Many manufactures have single models within a series that is just "smaller". You have to look at the specifications of each individual model.      If you can find PSU around 150mm (5.09" deep) you will have a much happier install experience, but you may have to settle for something in the 500-650w range.
Using EVGA PSU's as an example -- All the EVGA models over 700 watts (except the one I found) are (180mm / 7.09in).    Only the Supernova 750B1 is 165mm.   As a trade-off, the 750b1 is rated at "Bronze" efficiency rather than "Gold" or "Platinum". This isn't bad, and may makes sense. The ratings only deal with "Power Efficiency" not quality of build. Compared to the OEM Dell, these are in a different class.    I suspect that the 750B1's "BRONZE" rating is what allowed the smaller form factor.   Most high-wattage CPU's use the increased depth for larger heat sinks and heat dissipation. The bronze runs slightly warmer (compared to Silver/Gold/Platinum -- but not to the origional PSU in the Dell) , but it allows the required 15mm reduction in size that lets it fit into your case.   The quality of the PSU is still more than adequate for my needs, and the price can't be beat.
Now for installation.   I won't say it was EASY to get the PSU into the case. I had to disconnect all my SATA power and cables. I had to bend the cables on the ATX Case Top a little bit, and I had to be very patient reconnecting.
I also had to reroute the wire that ran from the top of the case to the Mini-Card Slot (?).   I honestly didn't know what those were (they sit behind the Rear USB Plugs on the mother board), and they snap on with tiny little clasps like the snaps on Jeans. I tried not to disconnect them (becasue they looked fragile) but I accidentally popped them off.   Thank goodness, they fasten back on. There are even little arrows above each terminal (one solid black, one an outline to indicate white) so you get them back on in the right order:
I found it handy to stuff many of the cables in the empty "Floppy drive" spot below the CD Drive.   I also found that I had to plug the cables in a certain order -- because some cables blocked off access to the terminals for others.   (The SATA/Power for the CD Drive, for example is right behind the PSU. I had to do those first, because I'd never get my fingers in there if I saved that for last).
Now for the pre-install preparation.   I'd updated the BIOS to A12 and downloaded the installer for the GeForce drivers before switching out my hard ware.
The A12 Bios driver's are a couple of years old, but they allowed detection of my GTX 970. Although traditional wisdom usually says, "Don't update your BIOS unless you are trying to solve a problem", I elected to just install the A12.   From my reading, the only people who seem have had problems seem to be those who didn't buy EVGA cards, have XPS 8700's (not 8500) and/or didn't install the A12 bios.
Sure, if you read the A10/A11/A12 bios release notes -- none of the fixes cited in the updates say anything about video card detection.    BUT, consider this:
"If decision to keep the A09 bios prevents your newly installed video card from displaying the desktop, do you REALLY want to temporarily REMOVE all that hardware JUST so you can install the A12 Bios? And then, put all that new hardware back in again?"
Not me. I considered the update "Low Risk" considering the alternative. Plus, I consider the risk of "Accidental Damage while Handling Hardware" to greater than a potentially frivolous BIOS update.
Somebody asked me, "Which version of the Bios did you install?"   It's an old one, and the only one on the Dell site for an XPS 8500 (Early 2012 edition):
Dell XPS 8500 / Vostro 470 System BIOS
A12.EXE
Release date 29 Oct 2013
Last Updated 31 Oct 2013
Version A12
The A12 BIOS update is cumulative (includes A09, A10a and A11), so installing A12 will bring you up to the most recent version (incorporating all the versions in between). You do NOT need to install any of the interim versions.
I uninstalled all my old ATI Drivers before I shut down the first time. I didn't install the Geforce drivers until after I switched out my hardware. (I just wanted the installer on my desktop -- ready and waiting).
All in all -- it worked. The card extends about 2-4" further into the case, but it fits. The PSU sits about 4" away from the back of the CD, but it fits.   And, it boots.
I just finished playing "Far Cry 4" on the Nvidia setting at 2560x1080.   The new setting (beyond Ultimate) showed up after I plugged in the card. I've also been playing Assassins Creed Unity (Which I picked as my free game with the card -- since I already had Far Cry 4).   Both seem to play 60fps without any issues.
Because of the fan on the PSU and the video card venting out the back, my machine actually runs cooler now.
Hope that helps.   My total cost was around $435. $349 for the card and $69 for the psu (plus tax).
Final Specifications (Aftermarket Parts in Purple):
XPS 8500, White Chassis w/19:1 media card reader   (Early 2012 Edition)
3rd Gen Intel Core i7-3770 processor 3.40 GHz with Turbo Boost 2.0 up to 3.90 GHz
16GB DDR3 SDRAM at 1600MHz
Windows 7 Professional 64 bit
256GB SSD SRT enhancement (Boot) -   3TB SATA Hard Drive 7200 RPM (OEM 3TB HD Failed 1yr)
3 x Western Digital WD4000FYYZ - 4TB Enterprise HD ( 6 Gb/s & 1.2 million hour MTBF!!!)
EVGA NVIDIA GTX 970 Superclocked Graphics Card (EVGA 04G-2974-KR)
EVGA SuperNOVA 750B1 750W Power Supply (PSU) (110-B1-0750-VR)
Integrated 7.1 with WAVE MAXXAudio 4
16X DVD+/-RW
Dell Wireless 1703 802.11b/g/n, Bluetooth v4.0+LE
Kindest Regards,
Andrew Russell
P.S. If you are wondering about that weird brace to the right of the PSU...   I added a 3rd hard drive below the CD Drive. There are only the "Front mounting holes" , so I got a little creative and straightened out one of the "PCI Mounting Plates" from an old ATX Case.   I bent the section with the screw fasteners with a pair of pliers, and the bracket as the perfect length to attach diagonally -- as a cross brace to hold the back of the hard drive in place:
[Edited 12/5/2014 -- Added system specifications and a few more photos]

SCSM 2012 Change form issue - Scheduled start and end times default to 12:00:00

I have a report that the Change Form in SCSM 2012 is not allowing users to set the scheduled start and end times. The date stays correct, but the time reverts back to 12:00:00, and the user has to save to the initial form, then re-open and
change the times.
I checked in the authoring tool, the time/date field is set to full date and time. (I think these are custom fields)
I am not sure where else to look to adjust any settings as needed.
Thanks for any assistance.
Joshua Fuente

Hi Joshua,
Is this situation on all consoles or few ones? Check the time format on the user's PC. 24h or 12h could affect the DateTime control's behavior.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Facebook:

Contract , scheduling agreement and service order

Hi all,
Can anybody tell me about the contract scheduling agreement and when we can suggest our client to go for schedule or contract agreement ?
Pls tell me elaborately .
Also Pls explain me about service order and when can i go for service order . whether it is restricted to AMC ?
Pls explain me elaborately.
pls explain me steps for creating contract or scheduling agreement and service order..........................
points to be rewarded.
Regards,
Girish.

Hi,
Contract is outline purchasing agreement where you have a contract with the vendor,may be a for a predetermined quantity or predefined value. So everytime you need the matl, you need to make PO ref the contract asking for the delivery of the matl. In such instance when PO is ref with contract its called contract release orders or call off orders. So Process are ME01, ME11, ME31K with aggnrement type, ME51,ME21 & MIGO,
Scheduling agreement is a long term purchase agreement, where you will keep issuing the delivery schedules whenever there is a change in requirement or at predetermined time intervals. The delivery schedule can be on hour/daily/weekly/monthly basis. SA is also an agreement with the vendor for the supply of matl, may be a quanity or value. The delivery dates will be maintained in ME38 ref the SA which are called delivery schedules.So you can maintain the delivery schedule and communicate the vendor on Forecase basis or JIT basis. And when you need some more matl then will only create SA deliveries using ME38. SA could be of 2 types:- without release documentation-system will transmit the delivery info to the vendor once you save the document.
With release documentation- after creating the delivery schedules you need to create SA release using ME84.So Process are ME01, ME11, ME31K with aggnrement type, ME38 & MIGO,
Service order or service PO is created with item Category "D" and an account assignment category as per ur requirement. U can not enter ur material here only u have to maintain short text of material. Example: You want to clean the boiler and u given contract to your Vendor. Vendor sends quotation mentioning that Rs.100/hr/Man head. Now how you will measure the cleaning activities of furnace? You can pay to contractor based on the hourly basis/ man head spent in cleaning activities. So in this case create the Purchase Order mentioning "Cleaning" in the short text in Item overview(Acc assignment ' K' or C or P and Item category 'D) and item details " Man Head" Service No , Gross price - Rs.100.00 and unit - hour ( or pick from Service master) and Quantity-number of hours spent by all man head.
The steps to create Service PO are:
1) Maintain Item Category as D & account assignment such as cost center Kor slaes orderC
2) Keep material code field blank.
3) Enter description of service & other fields in the PO Item Overview level. Press Enter.
4) System will prompt you to maintain services at Item Level. Maintain your service master number / service description & other fields (quantity / rate /)
5) Save the PO.
For more follow the links;
For more follow the link;
http://esoadocu.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=EB65A89F1AFD4C46AB61C6161BAF
http://www.sap-img.com/sap-sd/sap-sd-scheduling-agreement-vs-contract.htm
http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/contracting/file1499/index.htm
http://www.sap-img.com/materials/what-is-outline-and-scheduling-agreement.htm
Regards,
Biju K

How to compare delivery date in schedule lines and PGI in outbound delivery

Hi,
I want to create a report to monitor and compare different dates in sales and delivery process.
One of my key figure is the comparison between date confirmed to the customer, that I can find in the schedule line of the sales order, and the actual goods issue date from the outbound delivery.
But I can't succeed in making the link between delivery and schedule lines, means between LIKP and VBEP.
Would you have any idea?
Thank you.

It seems there's no exact (table) connection / link between delivery item and schedule line item.
Those who were searching for this thing (link / connection between delivery item and schedule line) were recommended to use FM "RV_SCHEDULE_CHECK_DELIVERIES".
This FM calculates the delivered quantity for each schedule line, so it makes link between the delivery item and schedule lines - however if you check the code it's quite sophisticated...
(if you put a breakpoint in the FM and display a SO in VA03, you can check how the parameters have to be populated with data).
Schedule Line and Delivery Link
Edited by: Csaba Szommer on Aug 5, 2011 12:03 AM

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please provide logic for schedule lines and material document Quantity.

Hi ABAPers,
Please help in the following context.
Is there any connecting or refrence field for which a particular schedule line item are considerd for the goods reciept of a particular material document.
Also provide the logic.
19                    34
15
14                   35
11
10
If 19 15 14 11 10 are schedule lines, and 34 35 are two recived quantities,
Then how can be the possible permutations and combinations logic to find out that, 34 = 19 + 15 and
       35 = 141110.
Thanks in advance...

Niles Raut wrote:
Hello Gurus,
>
> This is intracompany STO scenario with delivery. There is one STO for quantity say 1000 pc created in 2008. Delivery and PGI done for 1000 qty in 2008. Goods are received in receiving plant for qty 1000 in 2008. Now this delivery document is archieved and user has reversed the GR material document in 2010. Now this reversal material docuemnt has zero material qty becasue the delivery was archieved(which is the probable reson)
>
> When I want to cancel this reversal material document it gives error that "Qty and / or "delivery completed" ind. or final issue ind. are missing" which is logical since material document has zero quantity.
>
> Is there any sap notes or any other way to fix this?
>
> Please guide.
>
> Regards
> Nilesh
Where is actually the problem, if one only reversed 0 quantity?
Why do you think you need to reverse this reversal again?
why with year 2010?
Dont you do anual inventories? Such stock counts have corrected your stock anyway. if you start cancelling older movements then you create stock inconsistencies again.

Difference between Scheduling lines and Delivery schedule

Hi SD Experts
can u say me the clear difference between Scheduling lines and Delivery schedule.
where we will maintain deliver schedule. whether delivery schedule is automatically created along scheduling agreements..
with regards
James

Hi James,
Schedule Lines: Has basically information realted to delivery scheduling in Sales Order level.
Delivery Scheduling: Is a process using which system will determine what are the different activities which need to be performed and time taken for each activitiy only after which the material can be delivered to the customer.
Delievry scheduling will be started only from the material availability date i.e., system will first determine the material avail date and then do scheduling. By default Standard SAP system does Backward Scheduling in case material availability falls beyond the required delivery date system will do forward schedluing
Delivery Scheduling consists of the following Basic activities:
We give deatils while creating order:
Order Creation Date
Required Delivery Date
Order date - Material availability date - Transportation Planning Date - Loading date - Goods Issue Date - Required Delivery Date
Time Between GI Date and required Delivery Date is called Transit Time
Time Between LoadingDate and GI Date is called Loading time
Time Between Material Availability Date and Loading Date consists of 2 components - Pick / PackTime and Transportation Planning Time
System has to calculate all this before it determines the confirmed delivery date.
Give your mail Id I have some Presentation I will send you across.
REWARD POINTS IF IT HELPS
Regards
Srini

Not able to schedule Webi and Crystal reports in Infoview

Hi All,
We are using Business Objects XI 3.1.
I am not able to schedule reports in Infoview irrespective of the report type.
The Webi report throws the error "Bad Request(Invalid URL)" when I hit on the Format Destination section.
The Crystal report without prompt hangs when I hit schedule button and the report with prompt throws the error "An error has occurred:Invalid postback or callback argument."
Recently we installed the Fixpack 1.2 for XI 3.1.
Thanks in Advance
Umesh

Hi Kilic,
You mean to say re-install the Java version.
Also there is issue in IIS Server. It always encounters a problem and stops. I have to restart the IIS Server. How to deal with these issues? Very confused
Thanks and Regards,
Umesh Jadhav
Edited by: umesh jadhav on Mar 27, 2009 10:07 PM

Delivery and Goods Issue

Hi,
I am new to SAP and was trying to do a Goods Issue after creating a delivery. When i click on Goods Issue from the delivery document, I get the message
" Storage Location not defined for delivery item 000010"
When I try to go to picking overview and manually enter the storage location, it gives me a message,
" Error while determining ref. mov. type for WM via table 156S/601////L/X"
Could you please advice me for the same?
Thanks and Regards,
Aditya

Go to your material master and input the storage location there.
Maybe you have WM view active in MM. The location from where you are trying to delivery is a Warehouse managed location. you post some stock to storage location, which is not warehouse managed. Or do the stock transfer to this location. Then you will be able to do the PGI.
Thanks

Drivers for Windows Server 2008 and HDD issues

Recently I have had the hard drive with my OS fail. After replacing the hard drive and reinstalling windows server 2008 I seem to have run into a few issues with drivers. After insalling Windows, I had 3 items in my device manager that did not install properly. I was able to get the driver for the LAN port to work but I have not gotten the driver for "Standard VGA Graphics Adapter" and "SM Bus Controller". After a little research, I believe the video card is a Radeon HD4350. With that information I still have been unable toinstlal the correct drivers for either of these items. I've tried several drivers listed on the drivers support page on HP's website but all fo them return the same error about not finding the correct Operating System. The link to the driver I used originally on my previous installation seems to not be valid any longer.
Also I can't seem to access the two additoinal hard drives (connected by sata). They were used with the previous installation of windows with no issues. They appear in the device manager but do not show up under My Computer. A removeable drive does show up that I'm not sure what it is. Previously I had used software to mirror one of the drives onto the other as to prevent losing data if a drive would fail. Is one of the above drives causing the issue with not being able to access the drives or did the software used before cause the problem?
Any help on these issues is greatly appreciated.
This question was solved.
View Solution.

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

Multiple schedule line and reschedule for product selection

Hi,
Is it possible to mainatine multiple sechedule line for sales order where product selection is active
Let me explain the problem in detail.
We are using product selection functionality while creating sales order. Say for example in VB11 transaction I have maintained A= A1, A2 and A3. Where A1 has stock 50, A2 has stock 30, A3 has stock 20. Suppose my sales order is 150 for material A. The reason used is 0004 'automatic'. So while creating the sales order, confirmed qty for A1=50, A2 =30 and A3
= 20. I have unconfirmed qty. 50. for this scenario, I need to enable a
partial delivery, 1st I need to let the customer know when my 100 pcs going to be delivered and 2nd when my balance 50 pcs going to be delivered. So in the sales order I need to maintain two schedule line , one for
confirmed 100 and another for unconfirmed 50. I am not able to do this.
I can maintain only one schedule line per main item and at the sub item
level not possible to maintain.
The second problem is that, when I get stock for unconfirmed 50, I can
not reschedule. can anyone please help to solve this issue?
Regards,
Beena

goto item and doublle click on item and goto schedule lines and chenage the shedule lines..
wat i know is by avaiblity check it propose the delievry dates of items...
goto MM02 and mrp 1.. you can give there days to producee..
OR doc type propose delivery dates.. lead days...
hope it helps
you
ramki

Need to check PO Posting date at schedule line and material document level

HI All,
I am facing an issue to reconciliation data with ECC.
Issue :
we have a PO,item,schedule line with delivery date, scheduled qty and quantity received from EKET table
we have PO,item,Material document,movement type,posting date with quantity received from EKBE table
the standard extractor 2LIS_02_SGR is providing data at
PO,item,schedule line,material document,movement,posting date
as if now we are using this extractor to get the posting date at schedule line level.
can some one let me know how exacty the EKET and EKBE table are joined ???

Hi,
The data for the datasource 2lis_02_sgr can be compared in ECC using ME80FN transaction.
Please check the below Link for all the details reragrding 2LIS_02_SGR datasource.
[http://help.sap.com/saphelp_dm40/helpdata/en/69/063f3f2615e07fe10000000a114084/content.htm]
Hope this helps..
Thanks,
Nagarjuna

Link Delivery Schedule Line and Purchase Order History

Hello,
Please, i need to know if there is some link between delivery schedule item and PO history like PO history.
I need to know the quantity of goods issues per schedule line...
thanxs a lot
Jean Baena

Hai.
Check CO06 for undelivered item list.
Regards,
Mani

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

IP19- Graphic Scheduling Overview and Simulation# Issue.

Similar Messages

Maybe you are looking for