Is it possible to create a page with a signature, that can be then applied to other pages?

I want to know if I can create a page, with a place for an ink signature, and that signature can be then copied onto other pages within the pdf where the same person's signature is needed.

I would like to invite you to take a look at my Nugget on Action Engines.
Since you have a data value that must be available for live updates in more than one place in the code, an Action Engine will provide a reliable method to share that value. You will update the Action Engine any time the control changes. All other function that require that information can read the the value form the Action Engine.
That method has been in use since LV version 2 and provided the AE is implemented correctly (see Nugget) it gives good performance and helps keep code modular.
I hope that help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How to create a report with selection screen that can run in background

Sorry to ask these basic questions but I am knew to ABAP Programming.
To keep it simply, I am attempting to create a report that has a simple parameter driven selections screen with one field. That field takes in a folder path from the user. The user executes the report. The report creates a simply BDC that goes into SE16, gathers data from a table, and exports the results to a text file using the folder path provided. I created a variant for the folder path field in the selection screen hoping to use it while executing the report in the background. The report is not exporting the file as it did when run in the foreground for some reason.
I am wondering what event is triggered when a report is executed in the background. In the foreground (or when I execute the program via SE38->Execute->With Variant) the user needs to execute the program by hitting the execute button once the variant has populated the folder path field. It works then, so I am trying to get the same to work in the background. I am thinking I didn't put the program together correctly to accommodate the running in the background. How can you create a report that can accept user input via variant into a selection screen and then run in the background?
Please, any information would be greatly appreciated.
Thanks you all for reading this!!!

Ok, finally I understand what you're doing. Initially you lost me with the SE16 reference...
Not sure what you're trying to achieve overall, but apart from the fact that you cannot export/download a file to a user's PC via background job (unless you have a mapped network share on the server or something like an FTP server on the user's PC, but both are pretty hypothetical scenarios and unlikely to occur).
Also, the BDC approach to get data via SE16 is pretty awkward. Note that SE16 is guarded by some authorization checks and often users won't have access in production (which might not matter if you intend to always run your program in background via dedicated batch user). However, I have no clue why you wouldn't want to use [open SQL|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_READING.htm] to read the data. You could then save it on the application server or if you really have to get it to the user you can consider e-mailing the file (extracts should be compressed before sending). For the latter you'll find plenty of references here, basically it's the [business communication services|http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/1c5d3aebba4c38e10000000a114084/frameset.htm] that you'd need to look at.

How do I create a form with text fields that can continue to multiple pages with out it over lapping

I have created a form in Livecycle and have made every object a sub field. But I am still having the same probably. The text field only continues on to a second page and overlaps the footer I have created at the bottom of the page. I am new to livecycle and have tried a lot of different things to fix this problem. Help would be greatly appreciated.

Hi,
I've found this blog http://blogs.uoregon.edu/developments/2010/12/29/pdf-making-text-fields-grow-to-accommodat e-text/ and this example file : flowableTest.pdf? Is it close to what you search? I cannot go deeper into example now, but will.

Creating fillable forms with Live Cycle that can be emailed, saved, printed, etc. by anyone!

So I started using livecycle because the forms one can make are astounding, its a great program except for sending the forms out to be filled in especially to those only with reader. I've looked over a lot of past discussions and the answers seemed too complicated. Here is a workaround for not so computer savy folks like myself.
First, create your form, use everything the software has to offer to make your form exactly like you want and yes you can use the "submit by email button" that's what it's for.
Second, once the form is complete one seemingly complicated step to fix the "attach as pdf instead of xml" if your form keeps attaching as "xml" if it already attaches as "pdf" then skip the rest of the "second step"
     go to the top and click the "view" menu, then select "xml source"
     then go back to top and click the "edit" menu then select "find"
     type "xml" without the quotations and keep clicking "find next" until you see the "submit" line (eg. <submit format="xml")
     change the "xml" to "pdf"then go back to the "design view column" if you get a "parts of this or that cannot be whatever" message just click ok or ignore
Third, assumming you used the "submit by email" button like you should be the find that button and click the center somewhere, too the right a "field" box comes up
     enter your own email address, you can enter an stock email subject to or leave it blank
     also, a bit further down it says "presence" then "visible" I like to change "visible" to "visible (screen only)" this way it does not show on the printed version. That is one of the things i like the most about this program, you can put text boxes, signature boxes, any kind of
          box and make it visible, visible only on print, only on screen, etc. you just have to play around. It's nice to put a large text box with instructions for how the person should fill out and what to do that helps them and doesn't show up on print.
Ok, the above is a lot of words but if you print it out and follow step by step you'll see how easy it is and after a couple runs you won't have to look at your cheat sheet again.
Fourth, So, it was easy to figure out how to make a form the frustrating part was sending it out to be filled in save, printed whatever then sent back to me (now you). the problem is, the form has to be distributed to be approved so to speak. If it is just for one person that is no big
     deal, just first click "file" "save as" give it a name it reverts into adobe pro and asks how you would like to distribute, follow the instructions you send it to whomever you like they fill it out and submit it back because your email address is linked to the "submit as
     email" button. But what if its just a form you want on the company share drive anyone can open fill out, save, send to you or send to someone else, that's where it's tricky.
Fifth, Distributing to yourself so you can approve the form for world wide dissemination.
     Same procedure as above for the single recipient but instead of sending to someone else you send it back to yourself by entering your own email address again when it asks "how would you like to distribute your form--same as above"
     click "send now via email" enter your address they will return it to (but it's not they this time its really yourself)...follow the instructions, specifiy a generic folder that will collect data (you can delete later, you don't have to collect data unless you want)
     put in your email address as the recipient. change the stock email subject and message if you'd like, then click done, it will email you the form. close out the live cycle and adobe programs and go to your inbox (may take a min)
Sixth, open your attachment.(no remember you submitted the form to yourself but think of yourself as someone else like a customer) when the form is open you can enter stock fields if you like or do nothing...click the submit by email button, follow the instructions and s
     send it back to yourself again (don't get confused...it's really you as the customer sending back to yourself as the owner of the form) if you are a criminal think of it as like "laundering money through a bank" you are laundering the form through your own email system
     close out the form and go to your inbox again an open the returned form. now when you open it there is something new. there is a box that says "this file is a completed form (even though you didn't enter any data---it's a laundered form now) and leave it on the
     "add to existing data set" which is the one you created earlier in the generic folder....click "ok", now the form changes once again, there is a new look to the top, don't worry about it just go to the top right of the form and click on "options" then "save file as" give it
     a name again and remember where you saved it to. then close adobe and say yes when it asks you if "you want to save changes to your data set"....say yes!!
7th, forget the data set, no longer is important...find the form you saved and open it. go to the top and click the "advanced" button then "enable user rights in adobe reader" then click "save now" this is the final form so name it appropriately and place it where you want
     people to find it, they can now open, fill out, print, save as, email, whatever. The only downside is if they use the submit by email it automatically defaults to your email but when their email client opens they can delete your address and put someone else if they want.
thats it...lots of words but it really is easy after you do it a couple of time. the final downside, if the final form works but you decide to change anything on it with LiveCycle, you have to go back through all the steps or it will tell whoever opens it in reader that the original
     has change and they cannot do anything with it, but it's ok, make your changes or improvement, by now you are an expert at laundering live cycle forms, take you 5 min, no worries!
Happy Laundering!!
Sean
NOTE: this procedure only validated with LiveCycle 8.0

Here is the window you will see when you choose Enable Usage rights.
Note: That means that you can not edit any content once USAGE Rights are envoked.
So you must make sure all corrections to documents made and perfect before Envoking rights.

When I navigate to a new page, an additonal page (with a notice that Firefox is blocking access to the page) pops up. How can I stop the page from poping up?

How do I stop the pop up screens from popping up? I just want the screen I ask for to open

What is the wording of the message? Could you post a screen shot showing what it looks like? This article has tips on how to do that: [[How do I create a screenshot of my problem?]]
Also, does the add-on TopArcadeHits sound familiar? You might want to try disabling it here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Then restart Firefox (usually there is a handy link for this after disabling).

Adding web page in Adobe Muse that can be accessed from each web page

I have a disclaimer link at the footer of each of my web pages, I want it ot be accessed from each page. Where in Adobe Muse do I insert this page?

I'm new to Muse so two more questions for you all--
1. How do I add a drop down menu feature to my navigation menu to show the sub navigation?
2. How do I insert a Contact Form so that people can fill it out and send to us via email through our website?
Thanks!

Is it possible to create a tree with drag-and-drop functionality using ajax

I saw these samples;
Scott Spendolini's AJAX Select List Demo
http://htmldb.oracle.com/pls/otn/f?p=33867:1:10730556242433798443
Building an Ajax Memory Tree by Scott Spendolini
http://www.oracle.com/technology/pub/articles/spendolini-tree.html
Carl Backstrom ApEx-AJAX & DHTML examples;
http://htmldb.oracle.com/pls/otn/f?p=11933:5:8901671725714285254
Do you think is it possible to create a tree with drag-and-drop functionality using ajax and apex like this sample; http://www.scbr.com/docs/products/dhtmlxTree/
Thank you,
Kind regards.
Tonguç

Hello,
Sure you can build it, I just don't think anyone has, you could also use their solution as well in an APEX page it's just a matter of integration.
Carl

Is it possible to create a form with multiple form fields on a single line?

Is it possible to create a form with multiple form fields on a single line? I can't find anything in the documentation or a template that does this.
I am trying to create a "documents received" checklist with a check box on the left margin, a date-received field to the right of the check box and and a description of the document (Formatted Text) on the far right.
In the past I have entered the Fixed Text with a word processor, published it to a PDF file, then added the check box and date fields with the Acrobat Forms editor. I would prefer to use FormsCentral if it is possible.

We now support multiple fields on one line. This post provides a brief overview.
Give it a try and send us your feedback.
Sorry it took so long.
Randy

Is it possible to create a Column with Conditional Mandatory with another Column?

Is it possible to create a Column with Conditional Mandatory with another Column?
For example
In a Table we have column A, B, C.
A is Primary Column.
B is Optional
C is Conditional Mandatory.
A B
C
12345 ABC
OK
12346 NULL
NULL
12347 ABC
OK
Only if the B Column has the value then only C column should be mandatory

I guess you can't create a condtional mandatory column directly. However, you can use check constraint to on the column
create table YourTable
A int primary key,
B char(3),
C int,
constraint ch_con check(
B
is not null
or C is null

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

Is it possible to create a timestamp with an accuracy of 1ms?

I want to acquire data with PCI-6023 and write them with a precise timestamp to a file. Is it possible to create a timestamp with an accuracy of 1ms?
Maybe somebody can tell me experiences with logging data over a time periode up to 24 hours (and time-accuracy of 1ms)?

Hi Hans, This forum is related to one of National Instruments' automation products rather than data aquisition. Perhaps you will acheive better results if you post your question to one of the "Measurement Devices" forms instead.

Is it possible to create purchase order with zero value ?

Is it possible to create purchase order with zero value ?

Hi,
There are two scenarios where the purchase order is created with zero value.
1. Standard Purchase order with Free tick indicator.
Whenever we expect a material with free of cost from vendor, we use to put the free indicator in item overview. This means the material is valuated at zero price irrespective of price control in material master. Quanitiy is updated while receipts.
Conditions tab in item detail doesnt appear.
2. Consignment PO.
While creating a purchase order for consignment, the system doesnt ask us the price and the condition tab doesnt appear in item detail.
An info record for consignment must be maintained before making the GR.
Hope i have clarified. If you want any further clarification. please do reply.

Is it possible to create sub-client with in SAP production (PRD) client

Hello Experts,
Is is possible to create sub client with in SAP production client?
The question came to mind is that if I am the father company of two child/sub companies and both these function under my company and the users of all the companies will have different SAP log in . But, I can I create a Main PRD client say 'PRD L1 and under this client I create PRD L2 and PRD L3.
Is that possible and seems logical?
Thanks & Regards
Saurabh

This is not a question for this forum, because you are trying to discuss security where you should be trying (or rather your FI/CO department should be) to discuss business scenarios.
I never dreamed (after 20 years doing SAP), that I'd quote the original SAP documentation on clients vs. company codes again, ever - but here it goes:
Company Code
Definition
Smallest organizational unit of external accounting for which a complete, self-contained set of accounts can be created. This includes the entry of all transactions that must be posted and the creation of all items for legal individual financial statements, such as the balance sheet and the profit and loss statement.
The definition of the company code organizational unit is obligatory .
Anything bigger goes to a different client.
Try to come up with a business architecture first and adapt security after, accordingly.

I clicked on the firefox update & lost my old firefox page with my aol start & quick pick tool bar & this "new" page takes up more space so when I click on a di

I clicked on the firefox update & lost my old firefox page with my aol start & quick pick tool bar & this "new" page takes up more space so when I click on a different subject, I have LESS space to view it. . Why, WHY must you people always mess with things that were just fine. . I cannot eeven restore my computer to an earlier time, NOPE, won't do it. . So now what do I do ? ? Pete . . . God Bless . . . . I WANT MY PREVIOUS SETTINGS BACK ! ! ! ! !

The problem is with the page that opens at startup?
What does the new page look like? Can you paste the address into a reply?
Or if it doesn't have an address, maybe it's a page created by an add-on. Can you see any indication of the source of the page? Perhaps you could post a screen shot of what it looks like. This article has tips on that (make sure to delete to cover anything confidential): [[How do I create a screenshot of my problem?]]
To reduce content size, try the zoom feature: hold down the Ctrl key and tap the - key once or twice. If you want to reset the page to the standard size, you can hold down Ctrl and tap the 0 key once (zero).
But really we should get you back to the page you prefer, and hopefully with the additional details I requested we will be able to figure out what needs to get changed so you can do that.

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

Is it possible to create a page with a signature, that can be then applied to other pages?

Similar Messages

Maybe you are looking for